Cationic Mn12 single-molecule magnets and their polyoxometalate hybrid salts

A carboxy-substituted alkylammonium salt, namely, (4-carboxybenzyl)tributylammonium hexafluorophosphate, ZHPF(6), was prepared and used as incoming carboxylate ligand in a ligand-exchange reaction with [Mn(12)O(12)(O(2)CCH(3))(16)(H(2)O)(4)] (1) to afford a new Mn(12) single-molecule magnet (SMM), [Mn(12)O(12)(Z)(16)(H(2)O)(4)][PF(6)](16) (2), bearing 16 cationic units appended in the periphery. This compound behaves as a single-molecule magnet, exhibiting an out-of-phase ac magnetic susceptibility chi' '(M) signal that shows a single maximum in the 3.1-5.4 K temperature range. The frequency dependence of the maximum follows an Arrhenius law, with an effective energy barrier for reorientation of the spins U(eff) = 53 K. The reduced magnetization versus H/T data at different temperatures were fitted by using a Hamiltonian containing Zeeman, axial, and quartic zero-field splitting terms. The expected spin ground state S = 10 was found, and the least-squares fit afforded the following zero-field-splitting parameters: D = -0.44 cm(-1); B(4)(0) = 0.12 x 10(-4) cm(-1). Magnetization hysteresis loops were observed for 2, with a coercive field H(c) = 0.34 T. Complex 2 has been used as countercation in the preparation of a family of hybrid salts containing different polyoxometalate anions, [Mn(12)O(12)(Z)(16)(H(2)O)(4)][W(6)O(19)](8) (3), [Mn(12)O(12)(Z)(16)(H(2)O)(4)][PW(12)O(40)](16/3) (4), [Mn(12)O(12)(Z)(16)(H(2)O)(4)][(H(3)O)PW(11)O(39)Ni](4) (5), and [Mn(12)O(12)(Z)(16)(H(2)O)(4)][(H(3)O)PW(11)O(39)Co](4) (6). 3-6 exhibit typical magnetic hysteresis loops with higher coercive fields for the complexes containing diamagnetic polyanions: H(c) = 0.075 T (3), 0.046 T (4), 0.016 T (5), and 0.0075 T (6). However, the dynamics of the magnetic behavior below the blocking temperature is similar in all compounds. Broad frequency-dependent out-of-phase ac susceptibility signals are observed, presumably due to mixtures of different Jahn-Teller isomers. Their temperature dependence is also typical of an activated-energy process, with effective energy barriers in the 50 K range, irrespective of the nature of the polyoxoanion (diamagnetic, as in 3 and 4, or paramagnetic, as in 5 and 6). These findings seem to discard any influence of the polyoxometalate in the magnetic properties of the SMM.     

A dinuclear MnIII-CuII single-molecule magnet

The reaction of 1/3 equivalent of CuCl2.2H2O with MnCl2.4H2O and 5-bromo-2-salicylideneamino-1-propanol (H(2)5-Br-sap) in methanol gave dark brown crystals of [MnIIICuIICl(5-Br-sap)2(MeOH)] (1). Complex 1 has an alkoxo-bridged dinuclear core of MnIII and CuII ions, which have elongated octahedral and square-planar coordination geometries, respectively. In dc magnetic susceptibility measurements, chi(m)T values increased as the temperature was lowered, followed by a sudden decrease below 20 K. This behavior is indicative of the occurrence of intramolecular ferromagnetic interactions, and fitting gave an S=5/2 spin ground state with an exchange coupling constant J(MnCu) of +78 cm(-1). Magnetization data collected as a function of temperature and applied magnetic field were analyzed by using a spin Hamiltonian with isotropic Zeeman and axial zero-field splitting (ZFS) terms, and a negative D(5/2) value (-1.86 cm(-1)) was obtained. A high-field EPR (HFEPR) spectrum (342.0 GHz) at 4.2 K was composed of four peaks, and two additional peaks at higher magnetic field appeared as the temperature was increased. The temperature dependences in the HFEPR spectra are indicative of a negative D(5/2) value, and fitting of the data gave D(5/2)=-1.81 cm(-1). In the ac magnetic susceptibility measurements, frequency dependent in-phase (chi(m)') and out-of-phase (chi(m)') signals with peak maxima at 0.7-1.5 K were observed and small peaks below 0.7 K appeared. The ac susceptibility data supports that 1 is a single-molecule magnet (SMM). Arrhenius plots for the chi(m)' peaks from 0.7-1.5 K gave the re-orientation energy barrier (DeltaE) of 10.5 K with a pre-exponential factor of 8.2x10(-8) s.     

Heterodinuclear Cu-Tb single-molecule magnet

A strictly heterodinuclear Cu-Tb complex [LCu(O(2)COMe)Tb(thd)(2)] made with a Schiff base L, thd, and monomethylcarbonate ligands [L(2-) = N,N'-2,2-dimethylpropylenedi(3-methoxysalicylideneiminato); thd = tetramethylheptanedionato] behaves like a single-molecule magnet. The monomethylcarbonate ligand, which appears during the reaction pathway, bridges the Cu and Tb ions.     

A Heterotetranuclear [NiIIReIV3] single-molecule magnet

The reaction of [ReIVCl4(ox)]2- and fully solvated Ni2+ ions in a MeCN/i-PrOH mixture affords the heterotetranuclear complex (NBu4)4[Ni{ReCl4(ox)}3] where the rhenium precursor acts as a bidentate ligand toward the nicke(II) ion through the oxalate group. The mixed 3d-5d species exhibits intramolecular ferromagnetic coupling and it behaves like a single-molecule magnet.     

Photoluminescent Mn4 single-molecule magnet

The synthesis of [Mn(4)(anca)(4)(Hmdea)(2)(mdea)(2)].2CHCl(3) (1) is reported along with room temperature fluorescence, UV-vis, and NMR spectra. Direct current magnetization versus field data reveal a S = 8 ground state. Quantized steps in temperature- and field-dependent magnetization versus field hysteresis loops confirm single-molecule magnet behavior.     

A dodecanuclear heterometallic dysprosium-cobalt wheel exhibiting single-molecule magnet behaviour

A novel dodecanuclear wheel with ten Dy(III) ions and two Co(II) ions bridged by four Schiff-base ligands and sixteen acetates represents the highest-nuclearity 3d-4f example of its type displaying single-molecule magnet behaviour.     

Studies of a nickel-based single-molecule magnet

A cyclic complex [Ni(12)(chp)(12)(O(2)CMe)(12)(thf)(6)(H(2)O)(6)] (1) has been synthesised and studied (chp=6-chloro-2-pyridonate). Complex 1 exhibits ferromagnetic exchange between the S=1 centres, giving an S=12 spin ground state. Detailed studies demonstrate that it is a single-molecule magnet with an energy barrier of approximately 10 K for reorientation of magnetisation. Resonant quantum tunnelling is also observed. The field between resonances allows accurate measurement of D, which is 0.067 K. Inelastic neutron scattering studies have allowed exchange parameters to be derived accurately, which was impossible from susceptibility data alone. Three exchange interactions are required: two ferromagnetic nearest neighbour interactions of approximately 11 and 2 cm(-1) and an anti-ferromagnetic next nearest neighbour interaction of -0.9 cm(-1).     

Cyclic single-molecule magnet in heterospin system

The 2:2 complex of Co-carbene is generated by photolysis of [Co(hfpip)2(D2py2(TBA))]2, 1, having a cyclic structure functioning as a single-molecule magnet with Ueff = 96 K and Hc = 10 kOe at 1.9 K after annealing at 70 K.     

Studies of a linear single-molecule magnet

Reaction of the dinuclear complex [Mn2O2(bpy)4](ClO4)3 with H3cht (cis,cis-l,3,5-cyclohexanetriol) in MeCN produces the complex [Mn3(Hcht)2(bpy)4](ClO4)3.Et2O.2MeCN (1.Et2O.2MeCN). Dc magnetic susceptibility measurements reveal the existence of weak ferromagnetic exchange between the three Mn ions, leading to a spin ground state of S = 7, with D = -0.23 cm(-1). W-Band (94 GHz) EPR measurements on restrained powdered crystalline samples confirm the S = 7 ground state and determine the ground state zero-field splitting (ZFS) parameters of D = -0.14 cm(-1) and B4(0)= +1.5 x 10(-5) cm(-1). The apparent 4th order behaviour is due to a breakdown of the strong exchange limit approximation (J approximately d, the single-ion ZFS). Single crystal dc relaxation decay and hysteresis loop measurements reveal the molecule to have an appreciable energy barrier to magnetization relaxation, displaying low temperature sweep rate and temperature-dependent hysteresis loops. Density functional studies confirm the ferromagnetic exchange coupling between the Mn ions.     

A high anisotropy barrier in a sulfur-bridged organodysprosium single-molecule magnet

The sulfur-bridged dimers [{Cp'(2)Ln(μ-SSiPh(3))}(2)] (Ln=Gd (1), Dy (2); Cp'=η(5)-C(5)H(4)Me) were synthesized by the transmetalation reactions between [Cp'(3)Ln] and Ph(3)SiSLi. Compound 2 is a single-molecule magnet with slow relaxation of magnetization up to 40 K and an anisotropy barrier of U(eff) =133 cm(-1). Insight into the SMM properties of 2 and closely related SMMs has been obtained using ab initio calculations.     

A mixed-valence Co7 single-molecule magnet with C3 symmetry

The synthesis, structure and magnetic properties of [Co(II)(4)Co(III)(3)(HL)(6)(NO(3))(3)(H(2)O)(3)](2+) [H(3)L = H(2)NC(CH(2)OH)(3)] are reported: the complex is an exchange-biased single molecule magnet.     

Studies of an enneanuclear manganese single-molecule magnet

The reaction of [Mn(3)O(O(2)CMe)(6)(py)(3)] with the tripodal ligand H(3)thme (1,1,1-tris(hydroxymethyl)ethane) affords the enneanuclear complex [Mn(9)O(7)(O(2)CCH(3))(11)(thme)(py)(3)(H(2)O)(2)] 1.1MeCN.1Et(2)O. The metallic skeleton of complex 1 comprises a series of 10 edge-sharing triangles that describes part of an idealized icosahedron. Variable temperature direct current (dc) magnetic susceptibility data collected in the 1.8-300 K temperature range and in fields up to 5.5 T were fitted to give a spin ground state of S = (17)/(2) with an axial zero-field splitting parameter D = -0.29 cm(-)(1). Ac susceptibility studies indicate frequency-dependent out-of-phase signals below 4 K and an effective barrier for the relaxation of the magnetization of U(eff) = 27 K. Magnetic measurements of single crystals of 1 at low temperature show time- and temperature-dependent hysteresis loops which contain steps at regular intervals of field. Inelastic neutron scattering (INS) studies on complex 1 confirm the S = (17)/(2) ground state and analysis of the INS transitions within the zero-field split ground state leads to determination of the axial anisotropy, D = -0.249 cm(-)(1), and the crystal field parameter, B(4)(0) = 7(4) x 10(-)(6) cm(-)(1). Frequency domain magnetic resonance spectroscopy (FDMRS) determined the same parameters as D = -0.247 cm(-)(1) and B(4)(0) = 4.6 x 10(-)(6) cm(-)(1). DFT calculations are fully consistent with the experimental findings of two Mn(II) and four Mn(III) ions "spin up" and three Mn(IV) ions "spin down" resulting in the S = (17)/(2) spin ground state of the molecule, with D = -0.23 cm(-)(1) and U = 26.2 K.     

A cubane-type nickel single-molecule magnet with exchange-biased quantum tunneling of magnetization

1. Download : Download high-res image (113KB)
2. Download : Download full-size image

     

A high-spin diradical dianion and its bridged chemically switchable single-molecule magnet

Triplet diradicals have attracted tremendous attention due to their promising application in organic spintronics, organic magnets and spin filters. However, very few examples of triplet diradicals with singlet–triplet energy gaps (ΔE_ST) over 0.59 kcal mol⁻¹ (298 K) have been reported to date. In this work, we first proved that the dianion of 2,7-di-tert-butyl-pyrene-4,5,9,10-tetraone (2,7-tBu₂-PTO) was a triplet ground state diradical in the magnesium complex 1 with a singlet–triplet energy gap ΔE_ST = 0.94 kcal mol⁻¹ (473 K). This is a rare example of stable diradicals with singlet–triplet energy gaps exceeding the thermal energy at room temperature (298 K). Moreover, the iron analog 2 containing the 2,7-tBu₂-PTO diradical dianion was isolated, which was the first single-molecule magnet bridged by a diradical dianion. When 2 was doubly reduced to the dianion salt 2K2, single-molecule magnetism was switched off, highlighting the importance of diradicals in single-molecule magnetism.

We report a triplet diradical dianion in magnesium complex with ΔE_ST = 0.94 kcal mol⁻¹ (473 K). Its iron analog is the first single-molecule magnet bridged by a diradical dianion, and the SMM property is switched off through two-electron reduction.