紫外光固化脂环族环氧丙烯酸酯涂料的制备及性能

通过丙烯酸（AA）与脂环族环氧树脂的开环反应合成了可紫外光（UV）固化的脂环族环氧丙烯酸酯树脂（CEA）。采用红外光谱（FT-IR）对树脂结构进行了表征,研究了反应温度、反应时间对产率的影响。用活性稀释剂与CEA制备了涂料预聚物,用转板黏度计测定了预聚物的黏度,采用差示扫描量热（DSC）仪、综合热分析仪和铅笔硬度计对树脂固化膜进行了分析。结果表明：当丙烯酸与环氧基团摩尔比为1.03,120°C下反应25.8 h时,反应转化率可达96.58%。CEA固化膜的玻璃化转变温度为64°C,初始分解温度为314°C,活性稀释剂的加入增强了固化膜的耐热性,固化膜铅笔硬度可达6H。     

取代脲促进环氧树脂／双氰胺固化体系反应机理

双氰胺作为环氧树脂的固化剂，由于固化产物具有优良的机械和电性能，广泛应用在汽车、航天及电子等领域中．但由于其固化温度高达180C以上，使应用范围受到很大限制．专利文献曾报道晚衍生物作为环氧树脂／双氰胺固化体系的促进剂，可以使体系的固化温度降低到130～140oC，并且在室温下仍保持一定的潜伏性［‘，’］．在以往的研究中，认为取代脉的促进作用在于其与环氧发生反应生成环状化合物2一心竣烷酮和仲胺，仲胺与环氧基进一步反应生成的叔胺可以催化环氧发生阴离子聚合［’～’］．实验表明，环氧树脂／双氰胺／取代脉体系的固化温…     

2－乙基－4－甲基咪唑固化环氧树脂的固化反应机理、动力学及其反应活性

 本文应用ＤＳＣ和ＦＴＩＲ对２－乙基－４－甲基咪唑固化双酚Ａ二缩水甘油醚型环氧树脂体系的固化反应机理和２－乙基－４－甲基咪唑固化双酚Ａ二缩水甘油醚型、缩水甘油酯与脂环型环氧树脂体系的固化反应特征、动力学及其反应活性进行了研究．结果表明，双酚Ａ二缩水甘油醚型环氧树脂／咪唑体系的固化反应是分两步独立进行的，第一步是加成反应，第二步是催化聚合反应．缩水甘油酯与脂环型环氧树脂（ＴＤＥ－８５）／咪唑体系的固化反应过程也分两步进行，第一阶段反应主要是缩水甘油酯型环氧基进行的加成反应和催化聚合反应，第二阶段主要是脂环型环氧基进行的加成反应．各体系第一阶段的表现反应活化能均低于第二阶段活化能．当ＴＤＥ－８５型环氧树脂中引入缩水甘油醚型环氧树脂后，固化反应速率均较ＴＤＥ－８５环氧树脂单独固化时快．     

2－乙基－4－甲基咪唑固化环氧树脂的固化反应机理、动力学及其反应活性

本文应用ＤＳＣ和ＦＴＩＲ对２－乙基－４－甲基咪唑固化双酚Ａ二缩水甘油醚型环氧树脂体系的固化反应机理和２－乙基－４－甲基咪唑固化双酚Ａ二缩水甘油醚型、缩水甘油酯与脂环型环氧树脂体系的固化反应特征、动力学及其反应活性进行了研究．结果表明，双酚Ａ二缩水甘油醚型环氧树脂／咪唑体系的固化反应是分两步独立进行的，第一步是加成反应，第二步是催化聚合反应．缩水甘油酯与脂环型环氧树脂（ＴＤＥ－８５）／咪唑体系的固化反应过程也分两步进行，第一阶段反应主要是缩水甘油酯型环氧基进行的加成反应和催化聚合反应，第二阶段主要是脂环型环氧基进行的加成反应．各体系第一阶段的表现反应活化能均低于第二阶段活化能．当ＴＤＥ－８５型环氧树脂中引入缩水甘油醚型环氧树脂后，固化反应速率均较ＴＤＥ－８５环氧树脂单独固化时快．     

有机硅改性丙烯酸环氧单酯光-热混杂固化体系的表面性能

以有机硅改性丙烯酸环氧单酯为树脂配制了一系列紫外光-热混杂固化体系.通过FTIR表征了光-热固化过程双键和环氧特征吸收峰的变化.研究了不同的稀释剂对光固化和光-热混杂固化膜的凝胶率、吸水率、表面水接触角等性能的影响,并用能谱仪(EDS)测试了固化膜表面硅元素的含量.结果表明:光固化膜的凝胶率低于86.5%,而光-热混杂固化膜的凝胶率在97.0%左右.与丙烯酸环氧单酯光-热固化体系相比,有机硅改性丙烯酸环氧单酯光-热固化膜的表面水接触角有显著提高,由62.53°提高到99.27°,EDS测试也表明有机硅有富集于固化膜表面的特性.     

纳米SiO2的修饰改性及其在紫外光固化涂料中的性能研究

以对-甲基苯磺酸为催化剂，用丙烯酸羟乙酯和纳米SiO2进行酯化反应制备改性纳米SiO2用红外光谱仪和热失重分析仪对产物分析表明：纳米SiO2中约70．5％的Si-OH基团和丙烯酸羟乙酯发生了酯化反应。将改性前后的纳米SiO2应用于紫外光固化涂料中，研究了对涂料黏度和固化速率、涂料固化膜的铅笔硬度和耐磨性能等的影响。结果...     

双组分水性环氧树脂涂料

简述了双组分水性环氧树脂涂料的特点及其用途，分别介绍了水性环氧树脂乳液和水性环氧固化剂的制备方法、双组分水性环氧树脂涂料的分类、混合体系的固化成膜机理和适用期的判断。最后给出了对水性环氧树脂涂料进行配方设计时应考虑的因素。     

丙烯酸环氧酯树脂灌浆材料的研究

丙烯酸环氧酯树脂(Epoxy-acrylate resins)是六十年代出现的一种新型热固性树脂,它结合了环氧树脂和不饱和聚酯树脂的优点,成为一种很有发展前途的新型树脂。环氧树脂具有粘结力强,机械性能好,电绝缘性能和耐腐蚀性能好等一系列优点,但也存在一些缺点,如树脂本身粘度大,不易操作,加入稀释剂则其性能明显下降;树脂的固化过程不易控制,一般固化时间较长等。不饱和聚酯树脂虽然性能不如环氧树脂,但它却有很好的操作性能和固化性能。丙烯酸环氧酯树脂就是一种既保持环氧树脂的优良性能,并使之具有不饱和聚酯的优良操作性能和固化性能的新型树脂。最常用的丙烯酸环氧酯树脂是双酚A型环氧树脂的丙烯酸酯,具有下式结构:     

水性紫外光固化树脂的研究进展

综述了近年来水性紫外光固化树脂及其涂料制备的最新研究进展.详细介绍了各类水性紫外光固化树脂的结构特点、制备方法及其在涂料中的应用情况,尤其对水性紫外光固化环氧树脂、聚氨酯树脂和超支化聚合物树脂等作了重点介绍,并展望了本领域的未来发展趋势.     

环氧树脂与氰酸酯共聚反应研究

研究了催化剂对环氧树脂与氰酸酯树脂的共聚固化反应行为的影响,并初步探索氰酸酯／环氧固化的反应历程．研究表明,催化剂能明显地促进其固化反应,降低固化温度,缩短固化时间;氰酸酯与环氧共聚反应历程是首先氰酸酯三聚反应生成三嗪环结构,然后三嗪环开环与环氧共聚反应,最后是未能参与共聚反应的环氧官能团在唑啉结构和三嗪环的催化下发生聚醚化反应;在氰酸酯官能团欠量的条件下,固化树脂中主要是唑啉和聚醚结构,而三嗪环结构的含量很少．     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.