Allyl-containing polyaryl ethers with perfluorinated mono- and biphenylene fragments

A method for the synthesis of fluorinated allyl-containing bisphenol based on 4,4′-[(2,3,5,6-tetrafluoro-1,4-phenylene)bis(oxy)]diphenol has been elaborated. Curable aromatic polyethers have been prepared via polycondensation of the synthesized bisphenol with decafluorobiphenyl. The influence of bases, namely K₂CO₃ and NaH, on the molecular weights of polymers has been studied, and the conditions of their curing at allyl moieties have been found. Mechanical, physicochemical, and dielectric properties of allylcontaining polymers are dependent on the method of their preparation and curing.     

Synthesis of New Fluoropolymers: Tailoring Macromolecular Properties with Fluorinated Substituents

The challenges and opportunities in the preparation of new fluoro- polymers are illustrated by the synthesis of fluorinated poly(ether sulfones), polyimides, and polyethers. Synthetic methods used for the preparation of new fluorinated monomers and polymers include anion-radical substitutions of perfluoroalkyl diiodides, nucleophilic additions to fluorinated olefins, perfluoroalkylsulfonyl-mediated nucleophilic sub-stitutions, and direct fluorinations with elemental fluorine. Properly placed fluorinated substituents can have significant effects on the dielectric properties, thermal stability, moisture absorption, permeability, phase transitions, and reactivity of the resulting polymers. In addition, fluorinated groups can enhance nonlinear optical effects and provide a method for chromophore alignment. The special behavior of partially fluorinated substituent groups offers unique tools for tailoring macro-molecular properties.     

Aromatic cardo polyethers: film adhesives for solar cell current collecting system

Russian Chemical Bulletin - The synthesis of heat-resistant thermoplastic polymers from the class of aromatic polyethers, namely, cardo poly(arylene ether ketones) (co-PAEK) and cardo poly(arylene...     

Polyethers derived from bisphenols and highly fluorinated aromatics

A series of fluorinated aromatic polyethers was synthesized via aromatic nucleophilic substitution of highly fluorinated aromatics (1,2,4,5-tetrafluorobenzene, hexafluorobenzene, and decafluorobiphenyl) with bisphenol AF or bisphenol A. Polymerization with 1,2,4,5-tetrafluorobenzene was not observed, and polymerization of hexafluorobenzene with bisphenol proceeded only if the potassium carbonate–bisphenol ratio was carefully controlled. The polymer condensed from decafluorobiphenyl and bisphenol AF was prepared in 77% yield with an inherent viscosity of 1.01 dL/g. The polymer prepared from the condensation of decafluorobiphenyl with bisphenol A was obtained in 48% yield with an inherent viscosity of 0.28 dL/g. These polymers were very soluble in common organic solvents, formed clear, colorless films, and were thermally stable (> 450°C by TGA). The fully fluorinated polymer exhibited low water uptake (0.3%) and dielectric constant (2.17). © 1992 John Wiley & Sons, Inc.     

含氟芳杂环高分子及其在微电子工业中的研究进展

综述了近年来国内外在含氟芳杂环高分子方面的研究及应用进展情况。主要介绍了含氟聚苯并睬咪唑(PBI)、聚苯并喏唑(PBO)、聚芳醚(PAE)及其衍生物等材料。从含氟单体的合成、聚合物的合成及其应用等几个方面进行了阐述。     

Comparative investigation of novel PBI blend ionomer membranes from nonfluorinated and partially fluorinated poly arylene ethers

In this study, the properties of novel acid-base blend membranes from polybenzimidazole PBI and self-prepared sulfonated nonfluorinated and partially fluorinated arylene main chain polymers from the polymer classes of aromatic polyethers, polyetherketones, polyethersulfones, and polyphosphine oxides are comparatively discussed. The aims of this study were to (1) determine the influence of the chemical structure of the polymers on their thermal and chemical stabilities and to identify polymeric structures having stabilities as high as possible, and (2) determine the effect of the addition of PBI to sulfonated arylene ionomers in terms of improving of their chemical, thermal, and dimensional stabilities. The working hypothesis of the study was that partially fluorinated arylene main-chain ionomers should have better chemical and thermal stabilities than the F-free ionomers, due to the much higher stability of C F bonds, compared to that of C H bonds. Improved procedures have been used for the polycondensation reactions, by applying an excess of K₂CO₃ deprotonation compound; the use of a dehydration agent like toluene or benzene was not required. Further, reactions could be performed at lower temperatures than is usually required for such polycondensation reactions; most of the polycondensations were made in a temperature range between 80 and 130 °C. The following properties of the polymers and blend membranes have been determined: proton conductivity, water uptake, swelling, thermal stability including thermal stability of sulfonic acid groups and of the polymer backbone, and oxidative stability by H₂O₂ treatment. The result of these investigations was that polymers containing fluorinated building blocks and/or phosphine oxide building blocks had the best stabilities. Selected acid-base blend membranes were made from PBI and these aromatic polymers showed proton conductivities of up to 0.1 S/cm, water uptake values of not more than 40%, and starting temperatures for SO₃H group splitting-off approaching 290 °C. Moreover, PBI-sulfonated polymer blend membranes showed much less weight loss after H₂O₂ treatment than does the sulfonated polymers alone, indicating a radical attack-stabilizing effect of PBI. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2311–2326, 2006     

Perfluoropyridine: Discovery,Chemistry, and Applications in Polymers and Material Science

Perfluoropyridine (PFPy) is an organofluorine compound that has been employed for a variety of applications, from straightforward chemical synthesis to more advanced functions, such as fluorinated networks and polymers. This can be directly attributed to the highly reactive nature of PFPy, especially towards nucleophilic aromatic substitution (SNAr). The aim of this review is to highlight the discovery and synthesis of PFPy, discuss its reactive nature towards SNAr, and to summarize known reports of the utilization and thermal analysis of PFPy containing fluoropolymers and fluorinated network materials.     

“Enabling Technology” Polymers

Abstract

An area of polymer science that is of current and growing industrial importance is where the polymer is the enabling technology that makes a component, system, or process work. Without the special polymer, the technology simply does not operate in a useful manner.

The characteristics of this arena are very different from high volume commodity or engineering polymers. Performance is the overwhelming concern and the material is likely to be highly specialized to achieve optimum performance. Cost is of minor concern because the material is used in small quantities and the value it adds to the end use is exceedingly high. Supply is an issue because even at ultra-high prices the sales dollars generated are too small to be of interest to a large polymer producer. In addition, these polymers are often developed by an end-user company which is not in the business of producing polymers and not eager to share the end-use value with a partner.

One of the industrially important examples of polymers as enabling technology, is photoresists used in semiconductor chip manufacture. Within Raychem examples include: acrylic backbone polymers with crystallizable side chains; conductive, crystalline polymer composites; polymer-dispersed liquid crystal compositions; crosslinked fluorinated aromatic polymides or polyethers which will be discussed in detail.     

Synthesis and characterization of new aromatic polyesters and polyethers derived from 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethylene

New polyarylates and aromatic polyethers were synthesized from 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethylene, and aromatic dicarboxylic acid chlorides and aromatic dihalides, respectively. The polyarylates having inherent viscosities of 0.28–1.05 dL/g were synthesized by either the two-phase method or the high-temperature solution method. All the polymers were easily soluble in N-methyl-2-pyrrolidone, N,N-dimethylformamide, pyridine, m-cresol, 1,4-dioxane, and 1,1,2,2-tetrachloroethane. They have glass transition temperatures in the range of 217–250°C and showed no weight loss below 315°C in both air and nitrogen atmospheres. Aromatic polyethers with inherent viscosities of 0.85–1.21 dL/g were obtained by the polycondensation of 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethylene and aromatic difluorides in the presence of potassium carbonate. These polymers having glass transion temperatures of 193–220°C were also soluble in the aforementioned solvents and stable up to around 350deg;C in both atmospheres. © 1994 John Wiley & Sons, Inc.     

Polyethers and thioethers incorporating neutral and cationic organoiron complexes

The synthesis of linear and star-shaped oligomers containing cationic and neutral organoiron groups in their structures was achieved by reaction of cationic arene complexes of cyclopentadienyliron containing terminal hydroxyl groups with 1,1′-ferrocenedicarbonyl chloride or ferrocene carboxylic acid. The use of chloroarene complexes allowed for the formation of triiron complexes that were subsequently polymerized via nucleophilic aromatic substitution with various oxygen- and sulfur-based dinucleophiles. The corresponding polyethers and thioethers were isolated in good yields and these materials exhibited excellent solubilities in polar organic solvents. Cyclic voltammetric investigations revealed that the cationic iron centers pendent to the polymer backbones underwent reversible reduction steps, while the neutral iron centers within the polymer backbones underwent reversible oxidation steps. Photolysis of these polymers resulted in the removal of the cationic cyclopentadienyliron moieties pendent to the polymer backbones. Thermogravimetric analysis (TGA) revealed that the cationic iron complexes were cleaved from the polymers at approximately 210 °C. Differentials scanning calorimetry (DSC) revealed that the glass transition temperatures of the cationic polymers occurred at higher temperatures than their neutral analogs.     

Perfluorocyclobutyl (PFCB) aromatic polyethers: Synthesis and characterization of new sulfonimide containing monomers and fluoropolymers

The synthesis and thermal cyclopolymerization of aryl trifluorovinyl ether monomers containing novel sulfonimide acid functionalities are described. The monomers are prepared starting from commercially available 4-bromophenol in five steps. These novel polymers explore a new versatile class of partially fluorinated polymers for potential use in fuel cells and other electrochemical applications.     

有机锡聚醚的合成及性质的研究

利用界面缩聚技术,将二烷基二氯化锡、二(β-烷氧羰乙基)二氯化锡与有机二元醇、酚、硫醇反应,制成了一系列新的有机锡大分子化合物.对这些新化合物进行了分子量、红外光谱、TG/DTG测试.对有机锡大分子化合物阻止聚氯乙烯(PVC)热分解性能进行了测定.结果表明,新合成的有机锡聚醚化合物可作为PVC热稳定剂使用.     

Enantioselective epoxide polymerization using a bimetallic cobalt catalyst

A highly active enantiopure bimetallic cobalt complex was explored for the enantioselective polymerization of a variety of monosubstituted epoxides. The polymerizations were optimized for high rates and stereoselectivity, with s-factors (k(fast)/k(slow)) for most epoxides exceeding 50 and some exceeding 300, well above the threshold for preparative utility of enantiopure epoxides and isotactic polyethers. Values for mm triads of the resulting polymers are typically greater than 95%, with some even surpassing 98%. In addition, the use of a racemic catalyst allowed the preparation of isotactic polyethers in quantitative yields. The thermal properties of these isotactic polyethers are presented, with many polymers exhibiting high T(m) values. This is the first report of the rapid synthesis of a broad range of highly isotactic polyethers via the enantioselective polymerization of racemic epoxides.     

Poly(aryl ethers) by nucleophilic aromatic substitution. I. Synthesis and properties

A series of new aromatic polyethers have been prepared by solution condensation polymerization. The synthesis involves the condensation of a dialkali metal salt of a dihydric phenol with an “activated” or negatively substituted aromatic dihalide in an anhydrous dipolar aprotic solvent at elevated temperatures. The reaction is rapid, free of side reactions, and yields polymers of excellent color. Bakelite polysulfone can be prepared in this manner by reaction of the disodium salt of bisphenol A with 4,4′-dichlorodiphenyl sulfone in dimethyl sulfoxide (DMSO). Only dipolar aprotic solvents are useful for conducting the polymerization. Of these, DMSO and Sulfolane (tetrahydrothiophene 1,1-dioxide) are the most effective. Water or other competing nucleophiles must be absent if high molecular weight is to be obtained. Besides providing the necessary solubility, this highly polar solvent is believed to be essential in providing the rapid polymerization rates observed. The rates are further found to depend on the basicity of the bisphenol salt and upon the electron-withdrawing power of the activating group in the dihalide. As is usual for this type of reaction, the difluorides are found to be more reactive than the corresponding dichlorides. Most of the polyethers are amorphous, rigid, tough thermoplastics with high second-order transitions (T_g). Thermal stability and electrical properties are noteworthy. These and other properties are described for polysulfone, and glass transitions are given for a selected list of the other polyethers.     

Design of polyethers,thioethers, and amines with pendent iron moieties

Soluble organoiron polyethers, thioethers, and amines were synthesized via nucleophilic aromatic substitution reactions. The synthesis of these classes of organometallic polymers involved either the reaction of cyclopentadienyliron complexes of dichloroarenes with various oxygen and sulfur dinucleophiles or the reaction of ether‐ or amine‐containing diiron complexes with dithiols. Polymerization reactions with the diiron complexes gave rise to organoiron polymers with alternating ether/thioether or amine/thioether bridges. Removal of the iron moieties from the backbone of these polymers allowed for the production of the corresponding organic materials. Furthermore, the organometallic polymers had much higher solubilities than their organic analogues. Thermogravimetric analysis of the organoiron polymers indicated that the polymers lost their metallic moieties at approximately 200 °C, whereas degradation of the polymer backbones occurred around 500 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1216–1231, 2001     

A facile cesium fluoride-mediated synthesis of aromatic polyethers from bisphenols and activated aromatic dihalides

A facile method for the synthesis of high-molecular-weight aromatic polyethers was developed with the use of cesium fluoride as a base. The high-temperature solution polycondensation between bisphenols and activated aromatic dihalides with cesium fluoride in polar aprotic solvents readily afforded a series of aromatic polyethers having inherent viscosities of 0.5–1.0 dL/g under essentially neutral and milder reaction conditions, compared with the conventinal method using alkali hydroxides or alkali carbonates. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2055–2061, 1997     

Physical, thermal, dielectric and chemical properties of a hyperbranched polyether and its linear analog

The hyperbranched and the linear polyethers were prepared by one-pot nucleophilic displacement polymerization technique using cyanuric chloride and aromatic diol as reported earlier. The physical, thermal, dielectric and chemical properties of the hyperbranched polyether and its linear analog have been studied. The amorphous character of both the polyethers was observed in XRD study. The solubility studies showed that the hyperbranched polyether has relatively higher solubility in different solvents compared to its linear analog. The thermal properties of both polymers have been studied by thermogravimetric (TG) and differential scanning calorimetric (DSC) analyses. The chemical resistance tests indicated that both polyethers are very good chemical resistances except in dilute aqueous alkali solution. The dielectric properties such as dielectric constant and loss factor for both polyethers have also been studied with respect to changes of frequency (50-500 kHz) and temperature (303-343 K).     

AMINE FUNCTIONALIZED POLYETHERS AS BILE ACID SEQUESTRANTS: SYNTHESIS AND BIOLOGICAL EVALUATION

A series of amine functionalized polymers based on polyether backbones was prepared by the chemical modification of poly(epichlorohydrin) and poly(2-chloroethylvinyl ether). Nucleophilic substitution of pendant chloroalkyl groups offers a versatile route to prepare hydrophilic, cationic polymers. Through the choice of appropriate experimental conditions, including solvent, temperature, and amine reagent, a high degree of substitution at the chloromethyl groups can be achieved. Depending on the nature of the amine used, both water-soluble and amphiphilic cationic polymers were obtained. Crosslinked hydrogels were prepared by either subsequent crosslinking of the amine functional polyethers or by reaction of chloroalkyl polyethers with multifunctional amines. These amine functional polyethers exhibited promising bile acid sequestration properties during in vivo experiments using hamsters as animal models, providing a novel approach for treating hypercholesterolemia. Some of these polymers show efficacy superior to commercially available bile acid sequestrants. The results suggest that these novel polyammonium gels may be useful as cholesterol lowering agents.     

Synthesis and characterization of 1,3,4,-thiadiazole-containing polyethers from 2,5-bis (4-fluorophenyl)-1,3,4-thiadiazole and various aromatic diols

Seven 1,3,4-thiadiazole-containing polyethers with reduced viscosities of 0.27–1.44 dL/g were synthesized by the high-temperature solution polycondensation of novel activated difluoride, 2,5-bis (4-fluorophenyl)-1,3,4-thiadiazole, with aromatic diols possessing a variety of ring structures. The expected chemical structures were confirmed by IR and ¹H-NMR spectroscopy and elemental analysis. Of all the polymers, three polyethers were highly crystalline and soluble only in limited solvents such as concentrated sulfuric acid. The other polyethers were amorphous and dissolved easily in a variety of organic solvents including N-methyl-2-pyrrolidone (NMP), phenols, and chlorinated hydrocarbons. Colorless to slightly yellow-colored, transparent, and tough films could be cast from the NMP solutions of the amorphous polyethers. The mechanical properties of the films were excellent, and their tensile strength, elongation at break, and tensile moduli were in the ranges of 48–72 MPa, 5–7%, and 1.3–1.9 GPa, respectively. The amorphous polyethers had high glass transition temperatures of 204–299°C. All the polyethers were highly thermally and thermooxidatively stable and exhibited no weight loss up to 400°C, with 10% weight loss being recorded at 464–513°C in air. © 1994 John Wiley & Sons, Inc.     

树形聚醚的合成及其应用

树形聚合物高度支化,与线形结构的聚合物相比具有较低的粘度及良好的溶解性,而且其单分子尺寸通常在纳米尺度,在多方面具有广阔的应用前景。树形聚合物通常分为3种,即树枝状聚合物、超支化聚合物和树枝化聚合物。作为树形聚合物的主要一类,树形聚醚由于其良好的化学、物理稳定性,良好的水及有机溶剂的溶解性,以及生物相容性等诸多优点,其合成及应用研究得到了广泛重视。本文对不同种类树形聚醚的合成及其应用作一详尽的综述,包括树枝状聚醚、树枝化聚醚及超支化聚醚3种主要类型,同时报道了作者等在该领域的最新研究进展,并对该领域的研究进行了相应的展望。