Palladium magnetic nanoparticle‐polyethersulfone composite membrane as an efficient and versatile catalytic membrane reactor

Developing polymer catalytic membrane reactors is an aim due to its outstanding advantages. In this paper, a novel catalytic membrane containing palladium‐supported magnetic nanoparticles is introduced. Silica‐iron oxide core shell nanoparticles were first prepared and functionalized by phosphine ionic liquid functionalized poly(ethylene glycol). The modified magnetic nanoparticles were used as support for immobilization of palladium. The final palladium‐immobilized nanoparticles were used as active filler for the preparation of membrane reactor. The prepared membranes were characterized, and their activities were tested in carbon‐carbon bond formation and catalytic reduction. The catalytic membrane showed good performance in the mentioned reactions.     

PEDOT-supported Pd nanoparticles as a catalyst for hydrazine oxidation

Composite poly-3,4-ethylenedioxythiophene (PEDOT)/palladium (Pd) films were obtained by chemical deposition of dispersed palladium nanoparticles into PEDOT conducting polymer matrix. The amounts of palladium particles incorporated into PEDOT films were estimated by electrochemical quartz crystal microbalance measurements. It was shown that palladium loading depends on the time a PEDOT film is exposed in the solution, containing Pd(II)-ions, on the concentration of Pd(II) ions and the film thickness. X-ray photoelectron spectroscopy data have confirmed the presence of metallic palladium in the polymer. The morphology of pristine and composite films as well as the size of Pd nanoparticles and their distribution were characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). From SEM images, it was found that Pd particles decorated PEDOT globular structures as quasi-spherical particles, and their mean size was dependent on synthesis conditions. The nanoparticles were non-uniformly dispersed on the polymer surface. The comparison of TEM images of composite PEDOT/Pd films obtained for different times of metal loading was made. The remarkable effect of loading time on the size of particles has been established: the mean size of dominating palladium particles was close to 6–10 nm for 30 s of metal deposition, and it was getting larger with the increase of deposition time (close to 15–30 nm for 120 s). It is most likely that with prolongation of synthesis time, the deposition of palladium predominantly proceeds on the already deposited palladium clusters, resulting in the extension growth of their size. Catalytic properties of PEDOT/Pd composite films were studied in respect to hydrazine oxidation by cyclic voltammetry and voltammetry on rotating disk electrode. The obtained data allow to conclude that the process of hydrazine oxidation on PEDOT/Pd composites takes place predominantly on palladium particles, located on the surface or in the near-surface layers of the polymer. The diffusion nature of the limiting current of hydrazine oxidation on composite PEDOT/Pd film in phosphate buffer solution рН = 6.86 was confirmed, and hydrazine diffusion coefficient was calculated. The increase of the limiting currents of hydrazine oxidation with the increase of Pd deposition time was observed, resulting from the increase of the active surface area of palladium particles, acting as microelectrodes. The electroanalytical applications of these nanocomposite materials for the determination of hydrazine were demonstrated.     

Potentialities of silane-modified silicas to regulate palladium nanoparticles sizes

A promising approach to control palladium nanoparticle sizes by application of silane modified silicas was suggested. The combination of reductive properties of silicon hydride groups and hydrophobic properties of alkylsilyl groups which act as agglomeration limiters for metal nanoparticles gives an opportunity to synthesize uniformly distributed particles with a specified size. Silicas modified with triethoxysilane (TES) and diisopropylchlorosilane (DIPCS), as well as, the combination of hexamethyldisilazane (HMDS) and triethoxysilane were applied for formation of such bifunctional matrices. Properties of the silane-modified silica samples and changes occurred during the formation of palladium nanoparticles were studied by IR spectroscopy. Thermal stability of surface chemical compounds was investigated by thermogravimetric analysis (TGA); low-temperature nitrogen adsorption was used to study structural properties of the applied materials. With the use of transmission electron microscopy (TEM) the dependence of palladium nanoparticle size on the nature of support surface layer was found.     

Controlled immobilization of palladium nanoparticles in two different fluorinated polymeric aggregate cores and their application in catalysis

Fluoroalkyl end-capped betaine-type cooligomeric nanocomposites-immobilized palladium nanoparticles were prepared by the reactions of palladium chloride with sodium acetate in the presence of sodium chloride and the corresponding fluorinated cooligomers. Outer blocks of poly(2,3,4,5,6-pentafluorostyrene)-containing ABA-triblock copolymeric nanocomposites-immobilized palladium nanoparticles were prepared by the use of the corresponding block copolymers under similar conditions. TEM images showed that palladium nanoparticles can be immobilized outside the fluorinated cooligomeric nanocomposite cores; in contrast, palladium nanoparticles can be effectively immobilized inside these fluorinated ABA-triblock copolymeric nanocomposite cores. Thus, these two different fluorinated copolymers enabled the controlled immobilization of palladium nanoparticles in the fluorinated nanocomposite cores. These fluorinated nanocomposites-immobilized palladium nanoparticles were also applied to the catalysts for Suzuki-Miyaura cross-coupling reaction, and the different reactivity between these nanocomposites was observed.     

Quasi-homogeneous hydrogenation with platinum and palladium nanoparticles stabilized by dendritic core-multishell architectures

Platinum and palladium nanoparticles, supported and stabilized by polymeric core-shell architectures, proved to be active catalysts for hydrogenation reactions. Here, two different reactions were used as probes to investigate the influence of the polymeric support: the hydrogenation of α-methyl styrene (AMS) to cumene and the partial hydrogenation of 1,5-cyclooctadiene (COD). We found that the stability of the nanoparticles and the rate of reaction are higher in the presence of a hydrophobic octadecyl shell within a three-shell polymer system. The kinetic study of AMS hydrogenation showed much higher activities for palladium nanoparticles than for platinum nanoparticles, and the obtained results (e.g., 35 kJ/mol for the activation energy) are of the same order of magnitude as reported earlier for palladium supported on alumina. A methanol/n-heptane biphasic mixture was tested for catalyst recycling and allowed for highly efficient catalyst separation with very low metal leaching.     

A facile route for preparing a mesoporous palladium coordination polymer as a recyclable heterogeneous catalyst

To overcome the separation difficulty of the palladium-based homogeneous catalyst, the palladium complex can be anchored on various supports such as silica, polymers and nanoparticles. For the same purpose, we describe a general and facile method to immobilize palladium bis(phosphine) complexes on the basis of the technique widely used for metal-organic framework (MOF) synthesis, yielding a mesoporous coordination polymer palladium-CP1. Although palladium complexes are generally not stable enough to allow further manipulation, we succeeded in preparation of a palladium coordination polymer without by-product Pd clusters or nanoparticles. The fresh palladium-CP1 catalyst exhibits a yield close to 55% for tolane at room temperature and 24 h in Sonogashira coupling of iodobenzene and phenylacetylene, as compared with a yield of 89% for its homogeneous counterpart [Pd(PPh(3))(2)Cl(2)]. Furthermore, this catalyst is stable enough to be reused more than four times with no Pd and Zn leaching. Therefore this new immobilization method offers great promise for the produce of recyclable palladium heterogeneous catalysts with higher activity and higher thermal and chemical stability in the future.     

Preparation of siloxene nanosheet‐supported palladium as sustainable catalyst for Mizoroki–Heck reaction

Siloxene nanosheets were successfully modified with palladium nanoparticles by reducing palladium chloride with hydrazine hydrate. The palladium nanoparticles–siloxene nanosheets as a catalyst for the Mizoroki–Heck reaction exhibited high activity, recoverability and stability. The structural morphology of the catalyst was investigated using transmission electron microscopy. High efficiency of the catalyst was proved in the Mizoroki–Heck reaction after five catalytic recycles. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparison between polyethylenglycol and imidazolium ionic liquids as solvents for developing a homogeneous and reusable palladium catalytic system for the Suzuki and Sonogashira coupling

The carbapalladacycle complex of 4-hydroxyacetophenone oxime is a highly active palladium catalyst to effect the Suzuki coupling of aryl chlorides and other C-C forming reactions in water. In an attempt to develop a reusable, homogeneous system based on this complex, its stability against prolonged heating in different ionic liquids and polyethylenglycol (PEG) has been studied. It was found that the palladium complex decomposes in water, 1-butyl-1-methylimidazolium hexafluorophosphate and 1-butyl-1-methylimidazolium chloride to form palladium nanoparticles in the first two cases and PdCl₄²⁻ in the third case. In contrast, this cyclic palladium complex was stable upon extended heating in 1-butyl-2,3-dimethylimidazolium hexafluorophosphate and in PEG. The activity of this complex for the Suzuki and Sonogashira correlates with the stability of the complex, the activity in PEG being higher than any of the ionic liquids tested. Although the carbapalladacycle complex also decomposes in PEG upon reaction, the resulting Pd nanoparticles (2-5 nm size) are stabilized by PEG acting as ligand. In this way, a reusable, homogeneous system in PEG has been developed that is able to effect the Suzuki and Sonogashira couplings without the need of copper and phosphorous ligands, working at the open air.     

Interactions of Hydrogen with Pd@MOF Composites

Physisorption and chemisorption of hydrogen on solid-state materials are two fundamentally different interactions, both of which display advantages and drawbacks for hydrogen storage. It has been hypothesised that their combination by merging two classes of materials showing different sorption behaviour towards hydrogen in the same composite may synergistically combine their desirable properties. As representatives of such composites, palladium nanoparticles, nanoclusters, and single atoms have been encapsulated in a metal-organic framework matrix, embedded, or immobilised in its pores, respectively. In this minireview, we review advances on the understanding and potential applications of the combination of Pd with metal-organic framework matrices through the analysis of the nanocomposite materials’ interaction with hydrogen and sorption properties.     

Preparation and characterization of 4-dimethylaminopyridine-stabilized palladium nanoparticles

4-Dimethylaminopyridine (DMAP)-stabilized palladium nanoparticles with a mean diameter of 3.4 +/- 0.5 nm are prepared from the aqueous phase reduction of Na2PdCl4 using NaBH4 in the presence of DMAP. TEM and UV-vis spectroscopy characterization of the nanoparticle dispersion shows no obvious change in the nanoparticles several months after preparation. 1H NMR spectroscopy of the nanoparticles shows that the nanoparticle dispersion also contains a boron/DMAP complex and two palladium/DMAP complexes. One of the palladium complexes crystallizes out of the dispersion and is identified as Pd(DMAP)4(OH)2 by X-ray crystallography. Following extensive analysis, it is believed that the palladium/DMAP complexes are formed following the oxidation of the palladium nanoparticles. The prepared nanoparticle dispersion promotes selective hydrogen/deuterium (H/D) exchange on the carbon atoms alpha to the endocyclic nitrogen atom on the DMAP-stabilizing ligands through reaction with D2O. This activity is attributed to the presence of the nanoparticles rather than to the presence of the oxidized palladium/DMAP complexes.     

Stabilized spherical aggregate of palladium nanoparticles prepared by reduction of palladium acetate in octa(3-aminopropyl)octasilsesquioxane as a rigid template

Spherical aggregates of palladium nanoparticles were produced by stirring palladium(II) acetate with dendritic molecules (i.e., octa(3-aminopropyl)silsesquioxane octahydrochloride (POSS-NH3+) or the amine-terminated G1.0 poly(amidoamine) dendrimer (G1-NH2)) in methanol at room temperature via self-organized spherical templates of Pd(OAc)2 and the dendritic molecule. The mixing ratio of the terminal amino groups of the dendritic molecule and palladium ions (Z=[Pd2+]/[-NH2]) affected the formation of the spherical aggregates of palladium nanoparticles. Maximum Z values with no reduction of palladium ions (the solution remained yellow) were 1.0 for POSS-NH3+ and 1.6 for G1-NH2, respectively. TEM observations suggested that the density of the palladium nanoparticles in the aggregates using POSS-NH3+ as a template was higher than that using G1-NH2. From tapping mode atomic force microscopy, shapes of the aggregates using POSS-NH3+ and G1-NH2 were a spherical form and an oval form on plates, respectively. Increasing the rigidity of the silsesquioxane core of the dendritic molecules increased the stability of the spherical form in the dry state.     

Synthesis of iron nanoparticles via chemical reduction with palladium ion seeds

We report on the synthesis of highly monodisperse iron nanoparticles, using a chemical reduction method. Iron nanoparticles with an average diameter of 6 nm and a geometric standard deviation of 1.3 were synthesized at a pH of 9.50 from ferric chloride precursor with sodium borohydride as the reducing agent, polyacrylic acid as the dispersing agent, and palladium ions as seeds for iron nanoparticle nucleation. The resulting nanoparticles were ferromagnetic at 5 K and superparamagnetic at 350 K. The dispersing agent polyacrylic acid (PAA) was shown to prevent iron nanoparticles and possibly palladium clusters from aggregating; in the absence of PAA, only aggregated iron nanoparticles were obtained. The addition of palladium ions decreased the diameter of iron nanoparticles presumably by providing sites for heterogeneous nucleation onto palladium clusters. In the absence of palladium ions, the mean diameter of iron nanoparticles was approximately 110 nm and the standard deviation increased to 2.0. The pH of the solution also was found to have a significant effect on the particle diameter, likely by affecting PAA ionization and altering the conformation of the polymer chains. At lower pH (8.75), the PAA is less ionized and its ability to disperse palladium clusters is reduced, so the number of palladium seeds decreases. Therefore, the resulting iron nanoparticles were larger, 59 nm in diameter, versus 6 nm for nanoparticles formed at a pH of 9.50.     

Palladium nanoparticles in aqueous solution: Preparation,properties, and effect of their size on catalytic activity

A method has been developed for the preparation of palladium nanoparticles with different sizes of up to 7 nm via the reduction of Pd(II) ions with hydrogen in an aqueous solution on seed metal nanoparticles (2.5 nm). The effect of the size of nanoparticles on their catalytic activity in methyl viologen reduction with molecular hydrogen in an alkaline medium has been studied. It has been found that the specific catalytic activity of palladium nanoparticles is independent of their size.     

The use of palladium nanoparticles supported on graphene oxide in the Mizoroki-Heck reaction

We have developed a convenient single-step method for producing palladium nanoparticles on the surface of graphene oxide by reducing palladium chloride with NaBH₄. According to transmission electron microscopy data, palladium nanoparticles have a spheroidal shape; their sizes are 6–8 nm. The tests of immobilized palladium nanoparticles have shown that they exhibit high activity in the Mizoroki-Heck cross-coupling reaction.     

Magnetically recoverable 2-(aminomethyl)phenols-modified nanoparticles as a catalyst for Knoevenagel condensation and carrier for palladium to catalytic Suzuki coupling reactions

A class of magnetic nanoparticles modified by 2-(aminomethyl)phenols has been successfully designed and synthesized as a reusable catalyst for Knoevenagel reaction. What's more, such nanomaterial also proved as suitable carrier for immobilization of palladium nanoparticles and the obtained composite exerted potent catalytic activity in Suzuki coupling reactions. Both of the (aminomethyl)phenols-modified nanoparticles and its related palladium nanocatalyst could be easily separated and reused for several consecutive runs by magnetic decantation without significant loss of their catalytic efficiency.     

Formation of palladium hydride nanoparticles in Pd/C catalyst as evidenced by <Emphasis Type="Italic">in situ</Emphasis> XAS data

X-ray absorption spectroscopy was used to investigate the formation of palladium hydride upon treatment of metallic Pd nanoparticles 0.9–2 nm in size supported on carbon-carbonaceous material SIB UNIT? with hydrogen. Nanoparticles with the size as small as 0.9 nm can still form hydride PdH. Changes in the chemical composition of gaseous medium cause a reversible transformation of metallic palladium nanoparticles to palladium hydride nanoparticles with tentative stoichiometry PdH_0.6.     

The electroanalytical detection of hydrazine: a comparison of the use of palladium nanoparticles supported on boron-doped diamond and palladium plated BDD microdisc array

We show that both a random distribution of palladium nanoparticles supported on a BDD electrode or a palladium plated BDD microelectrode array can each provide a sensing platform for the electrocatalytic detection of hydrazine. The palladium nanoparticle modified electrode displays a sensitivity and limit of detection of 60 mA mol(-1) L and 2.6 microM respectively while the array has a sensitivity of 8 mA mol(-1) L with a detection limit of 1.8 microM. The beneficial cost implications of using palladium nano- or micro-particles in sensors compared to a palladium macroelectrode are evident. Interestingly the array of the nanoparticles shows similar sensitivity and limit of detection to the microelectrode array which probably indicates that the random distribution of the former leads to 'clumps' of nanoparticles that effectively act as microelectrodes.     

Synthesis and application of palladium stearates as precursors for the preparation of palladium nanoparticles

This report successfully demonstrates the synthesis and application of palladium stearates. It was found that the branching of the carboxylate anion of metal precursors could influence the size and shape of palladium nanoparticles (PdNPs). Worm‐like nanowires were formed when using the branched isomer palladium isostearate (PdISt₂), while triangular nanoparticles were produced in a majority when using the normal form: palladium stearate (PdSt₂). Furthermore, when applying CO₂ to the system, both types of PdNPs transformed into more spherical shapes with smaller sizes. The formation of carbamates from the amine stabilizer with CO₂ could prevent the further growth and aggregation of PdNPs. The PdNPs were tested as catalysts for the hydrogenation of styrene, and higher catalytic activities were achieved with PdNPs that were prepared with the assistance of CO₂. Copyright © 2012 John Wiley & Sons, Ltd.     

Oxygen dissociation on palladium and gold core/shell nanoparticles

Oxygen dissociation reaction on gold, palladium, and gold‐palladium core/shell nanoparticles was investigated with plane wave basis set, density functional theory. Bader population analysis of charge and electron distribution was employed to understand the change of catalytic activity as a function of the nanopaticle composition. The nanoparticles’ electronic properties were investigated and the degree of core/shell charge polarization was estimated for each composition. It was found that surface polarization plays an important role in the catalysis of the initial step of electrophile reactions such as oxygen dissociation. We have investigated the O₂ adsorption energy on each nanoparticle and the activation barrier for the oxygen dissociation reaction as a function of the nanoparticle structure. Furthermore, we have investigated the influence of surface geometry, that is., surface bond lengths on the catalytic activity. We have compared the electronic and the geometry effects on the oxygen activation and dissociation. Our design rules for core/shell nanoparticles offer an effective method for control of the surface catalytic activity. Palladium and gold are often used as catalysts in synthetic chemistry. First‐principles calculations elucidate the mechanisms that control the surface reactivity of gold, palladium, and gold‐palladium core shell nanoparticles in oxygen dissociation reactions. Oxygen dissociation is promoted on the gold surface of gold/palladium core‐shell nanoparticles by favorable electron transfer from the core to the shell. Such core‐shell electronic effects can be used for fine‐tuning the nanoparticles catalytic activity.