Investigation of Chloride Ion Substitution Equilibria in AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> with Ethylenediamine and 1,3-Diaminopropane Using Capillary Zone Electrophoresis

Substitution of chloride ions in AuCl ₄ ^? with ethylenediamine (en) and propylenediamine (tn) is studied by capillary zone electrophoresis at I = 0.05 M and T = 25°C. The substitution constants are determined: AuenCl ₂ ⁺ + en = Auen ₂ ³⁺ + 2Cl^–, logK₂ = 10.4; AuCl ₄ ^? + tn = AutnCl ₂ ⁺ + 2Cl^–, logK₁ = 16.1; AutnCl ₂ ⁺ + tn = Autn³⁺₂ + 2Cl^–, logK₂ = 12.0.     

Interactions between AuCl<Subscript>4</Subscript><Superscript>−</Superscript> and CTA<Superscript>+</Superscript> ions in water

The solubility of hexadecyltrimethylammonium tetrachloroaurate (CTA·AuCl₄) in water was measured at different temperatures of 288.2, 293.2, 298.2, 303.2, and 308.2 K. The enthalpy change associated with the formation of the CTA·AuCl₄ precipitate was estimated on the basis of the van’t Hoff equation and was found to be −42.5 ± 2.8 kJ mol⁻¹ at 298.2 K. The calorimetric enthalpy change for the CTA·AuCl₄ precipitate formation was directly determined by isothermal titration calorimetry performed at 298.2 K and was found to agree well with that estimated from the van’t Hoff equation.     

Solid contact [AuCl<Subscript>4</Subscript>]<Superscript>−</Superscript>-selective electrode and its application for evaluation of gold(III) in solutions

An ion-selective electrode (ISE) for measurement of [AuCl₄]⁻ anions based on tetradecylammonium tetrachloroaurate(III) in a polyvinyl chloride matrix deposited on a solid graphite-polyvinylchloride composition was developed. Its characteristics such as stability of the electrode potential, linear region of the electrode function and its slope, and the limit of detection were determined. The effect of HCl and KCl concentrations on the characteristics of the ISE were studied to select the optimum measurement conditions. The developed electrode was used to estimate the conditional solubility product of some soluble compounds containing [AuCl₄]⁻.     

The ESCA analysis of the B<Subscript>3</Subscript>H<Stack><Subscript>8</Subscript><Superscript>−</Superscript></Stack> anion

Compounds [Et₄N]₂B₃H₈ and CsB₃H₈ are studied using the ESCA method. The results of analysis of the B1s electron spectra and estimation of the effective charge differences in [Et₄N]₂B₃H₈ are compared to the data of theoretical calculations of the B₃H₈⁻ anion.     

Identification of Anionic Supramolecular Complexes of Sulfonamide Receptors with Cl<Superscript>−</Superscript>, NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> by APCI-MS

As part of a mass spectrometric investigation of the binding properties of sulfonamide anion receptors, an atmospheric pressure chemical ionization mass spectrometric (APCI-MS) method involving direct infusion followed by thermal desorption was employed for identification of anionic supramolecular complexes in dichloromethane (CH₂Cl₂). Specifically, the dansylamide derivative of tris(2-aminoethyl)amine (tren) (1), the chiral 1,3-benzenesulfonamide derivatives of (1R,2S)-(+)-cis-1-amino-2-indanol (2), and (R)-(+)-bornylamine, (3), were shown to bind halide and nitrate ions in the presence of (n−Bu)₄N⁺X⁻ (X⁻ = Cl⁻, NO₃⁻, Br⁻, I⁻). Solutions of receptors and anions in CH₂Cl₂ were combined to form the anionic supramolecular complexes, which were subsequently introduced into the mass spectrometer via direct infusion followed by thermal desorption. The anionic supramolecular complexes [M+X]⁻, (M=1–3, X⁻=Cl⁻, NO₃⁻, Br⁻, I⁻) were observed in negative mode APCI-MS along with the deprotonated receptors [M−H]⁻. Full ionization energy of the APCI corona pin (4.5 kV) was necessary for obtaining mass spectra with the best signal-to-noise ratios.     

Nucleophilic Reactivity of Hydroxide and Hydroperoxide Ions in Aqueous-Alcoholic Media and of HCO<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> Ion in Water

Nucleophilic reactivity of hydroxide and hydroperoxide ions toward ethyl 4-nitrophenyl ethylphosphonate, diethyl 4-nitrophenyl phosphate, 4-nitrophenyl 4-toluenesulfonate, and 4-nitrophenyl dimethylcarbamate in the system H₂O₂-KOH was studied in aqueous-alcoholic solutions at 25°C. The rate of reactions of both anions with ethyl 4-nitrophenyl ethylphosphonate, diethyl 4-nitrophenyl phosphate, and 4-nitrophenyl dimethylcarbamate and of hydroxide ion with 4-nitrophenyl 4-toluenesulfonate increases with rise in the fraction of the alcohol in mixtures of water with isopropyl and tert-butyl alcohols, while the reaction rate of hydroperoxide ion with 4-nitrophenyl 4-toluenesulfonate decreases. The rate of reactions of both anions with all the above substrates in mixtures of water with ethylene glycol decreases as the fraction of the latter rises. The apparent rate of the reaction of ethyl 4-nitrophenyl ethylphosphonate with anionic nucleophiles in the system H₂O₂-HO^?-HCO ₃ ^? in water at pH 8.5 almost does not depend on the concentration of ammonium hydrogen carbonate up to a value of 1 M, and it increases when the NH₄HCO₃ concentration exceeds 1 M. Mixtures of water with the lower monohydric alcohols were recommended for use as components of H₂O₂-HO^?-HCO ₃ ^? systems for oxidative decomposition of ecotoxicants.     

Dioxouranium(VI) Hydrolysis at 75 and 100 °C in 3.6 mol⋅kg<Superscript>−1</Superscript> LiClO<Subscript>4</Subscript> Aqueous Medium

This work is concerned with the acidic properties of the uranyl ion, UO₂²⁺, at 75 and 100 °C in 3.6 mol⋅kg⁻¹ LiClO₄ aqueous medium. The investigation was carried out with a coulometric-potentiometric technique. Direct and reverse acid-base titrations were carried out in order to check whether equilibrium had been reached. Moreover, in order to determine whether or not the solutions were oversaturated, a further check was carried out with fresh saturated hydrolyzed solutions.     

Chemical Bonding in the Complexes XeF<Stack><Subscript>5</Subscript><Superscript>+</Superscript></Stack>XF<Stack><Subscript>6</Subscript><Superscript>−</Superscript></Stack> (X = P,As, Sb,and Bi)

Ab initio quantum-chemical calculations of the complexes XeF ₅ ⁺ XF ₆ ^? (X = P, As, Sb, and Bi) were performed with the use of relativistic pseudopotentials for heavy atoms and full-electron basis sets. The chemical bonds were characterized by the parameters of critical points (electron density, its Laplacian, total electron energy, and its kinetic and potential components). It was demonstrated that the interaction between the XeF ₅ ⁺ cation and the XF ₆ ^? anion in XeF ₅ ⁺ XF ₆ ^? follows a key-lock scheme involving directed interactions of bridging fluorine atoms F_b → Xe and that the structuring function of the lone electron pair of the Xe atom is to compensate the destabilizing electrostatic interaction between the Xe and X atoms bearing excess positive charges.     

The effect of NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack> and OH<Superscript>−</Superscript> ions on the laser ablation of Cs<Superscript>+</Superscript> ion on Type 304 stainless steel

Type 304 stainless steel specimens artificially contaminated with CsCl solution were treated with KOH solution and KNO₃ solution, respectively. Cs⁺ ion removal tests by a Q-switched Nd:YAG laser at 1064 nm at a given fluence of 57.3 J/cm² were performed. The surface morphology and the relative atomic mole ratio of the specimen surface were investigated by SEM and EPMA. The order of Cs⁺ ion removal efficiency of laser was no-treatment < KOH < KNO₃ during the 42 shots. From the investigation of XPS peaks around 532.7 and 292.9 eV, KNO₃ on a surface of specimen was found to be fully decomposed during the laser irradiation. It was suggested that Cs₂O particulates formed by the reaction between the reactive oxygen generated from the nitrate ion and Cs⁺ ion on the metal surface could be easily suspended. For the KOH system, FeOOH was formed during the laser irradiation and it changed into Fe₂O₃. It was also suggested that Cs₂O particulates were formed by the reaction between the reactive oxygen generated from the decomposition of K₂O and Cs⁺ ion on the metal surface..     

Influence of ion size on the stability of chloroplumbates containing PbCl<Stack><Subscript>5</Subscript><Superscript>−</Superscript></Stack> or PbCl<Stack><Subscript>6</Subscript><Superscript>2−</Superscript></Stack>

The enthalpies of formation of PbCl₄, PbCl₅⁻ and PbCl₆²⁻, originating from quantum mechanics, have enabled the thermodynamic behaviour of these ions with respect to Cl-detachment to be assessed. The stability of salts containing PbCl₅⁻ and PbCl₆²⁻ as a function of the dimensions of these anions and complementary cations was studied using an approach combining the Kapustinskii-Yatsimirskii equation with basic thermochemical relationships. It was found that hexachloroplumbates of monovalent metal cations will not dissociate into metal chlorides and PbCl₄, provided the complementary cations are suitably large in size. Hexachloroplumbates of divalent metal cations have not yet been synthesised since no known metal cations attain the requisite large size. Such salts will not dissociate if the divalent metal cations are able to complex suitably large electron-donating ligands. The pentachloroplumbates of both monovalent and divalent metal cations are unstable, since no known metal cations have appropriately large ionic radii. The approach adopted appears to be useful for the examination of the thermal behaviour, stability and reactivity of chloroplumbates.     

Column preconcentration of gold by adsorbing AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> onto methyltrioctyl ammonium chloride–naphthalene and subsequent atomic absorption spectrometric determination

A sensitive, selective and simple preconcentration method for ultra-trace gold determination has been developed that uses naphthalene–methyltrioctyl ammonium chloride (Aliquat 336s) as an adsorbent. Gold, in the form of AuCl₄^–, was retained by the adsorbent in the column at a flow rate of 1 ml min^–1. After filtration, the solid mass consisting of the gold complex and naphthalene was dissolved out of the column with 5 ml of N,N-dimethylformamide (DMF), and the metal was then determined by atomic absorption spectrometry. In the initial solution, the calibration graph of absorbance versus gold concentration was found to be linear in the range 0.5–150 ng ml^–1 Au(III) with r=0.997 (n =9), and the 3 s detection limit was 0.428 ng ml^–1. The relative standard deviation for eight replicate measurements of 20 g of gold was 2.14%. Preconcentration factors of 390 and 650 were achieved using 5 ml and 3 ml of DMF, respectively. The proposed method was successfully applied to the determination of gold in wastewater, processed pool water, slurry pool water, and raw well-water from the Moteh gold mine, and synthetic samples.     

A new method of synthesis of the B<Subscript>3</Subscript>H<Stack><Subscript>8</Subscript><Superscript>−</Superscript></Stack> anion

A new method of synthesis of the B₃H₈⁻ anion has been suggested. The method uses the reaction of some metal halides (CuCl, SnCl₂, CrCl₃, PbF₂, PbCl₂, PbBr₂, and BiCl₃) with sodium tetrahydroborate. It is characterized by high (up to quantitative) yields and simplicity of isolation of the target products ((n-C₄H₉)₄N)[B₃H₈] and Cs[B₃H₈].     

Comparison of Magnetic Properties between Spin Singlet and Triplet Li<Subscript>3</Subscript>Al<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> Clusters

With a second-order Møller–Plesset perturbation theory and Hartree–Fock nuclear magnetic resonance calculations, we investigated the magnetic properties of spin singlet and triplet Li₃Al ₄ ^? clusters. The obtained gauge-independent atomic orbital magnetic shielding tensors confirm the paramagnetism of singlet Li₃Al ₄ ^? and diamagnetism of the triplet. The planar rings composed of four aluminum atoms make the magnetic properties of Li₃Al ₄ ^? clusters versatile. The localized molecular orbital, low symmetry of geometric conformation and narrow gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital are found to correlate with the paramagnetism of singlet Li₃Al ₄ ^? . The origin of the paramagnetism is explained. In triplet Li₃Al ₄ ^? , the two outmost orbitals are degenerate, causing a conversion from the paramagnetism to diamagnetism.     

The undecahydrodecaborate anion B<Subscript>10</Subscript>H<Stack><Subscript>11</Subscript><Superscript>−</Superscript></Stack> as the starting reagent in exopolyhedral substitution and complexation: Theoretical and experimental prerequisites

Using the electron density functional theory (B3LYP approximation) with the 6-31G* basis set, the potential energy surface of the undecahydrodecaborate anion B₁₀H₁₁⁻ was calculated and the activation energies and the activation barriers for the elementary reactions of proton H* migration around the boron polyhedron were estimated. Analysis of the calculation results in comparison with the experimental data accumulated recently implies that the salts of the B₁₀H₁₁⁻ anion represent a new type of starting compounds for exopolyhedral substitution and complexation involving decaborate anions. Of particular interest is the targeted preparation of isomers of metal complexes containing a decaborate anion depending on the use of B₁₀H₁₀²⁻ or B₁₀H₁₁^¨- as the starting reagent. Certain trends in the reactivity of B₁₀H₁₀⁻ and B₁₀H₁₁⁻ anions can be explained in terms of the simple analysis of Mulliken charge distribution on atoms.     

Solubility of B-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> and the Hydrolysis of Niobium(V) in Aqueous Solution as a Function of Temperature and Ionic Strength

B-Nb₂O₅ was recrystallized from commercially available oxide, and XRD analyses indicated that it is stable in contact with solutions over the pH range 0 to 9, whereas solid polyniobates such as Na₈Nb₆O₁₉?13H₂O(s) appear to predominate at pH>9. Solubilities of the crystalline B-Nb₂O₅ were determined in five NaClO₄ solutions (0.1≤I _m /mol?kg^?1≤1.0) over a wide pH range at (25.0±0.1)?°C and at 0.1 MPa. A limited number of measurements were also made at I _m =6.0 mol?kg^?1, whereas at I _m =1.0 mol?kg^?1 the full range of pH was also covered at (10, 50 and 70)?°C. The pH of these solutions was fixed using either HClO₄ (pH≤4) or NaOH (pH≥10) and determined by mass balance, whereas the pH on the molality scale was measured in buffer mixtures of acetic acid?+?acetate (4≤pH≤6), Bis-Tris (pH≈7), Tris (pH≈8) and boric acid?+?borate (pH≈9). Treatment of the solubility results indicated the presence of four species, \(\mathrm{Nb(OH)}_{n}^{5-n}\) (where n=4–7), so that the molal solubility quotients were determined according to:

$0\mathrm{.5Nb}_{2}\mathrm{O}_{5}\mathrm{(cr)+0}\mathrm{.5(2}n-5\mathrm{)H}_{2}\mathrm{O(l)}_{\leftarrow}^{\to}\mathrm{Nb(OH)}_{n}^{5-n}+(n-5)\mathrm{H}^{+}\quad (n=4\mbox{--}7)$

and were fitted empirically as a function of ionic strength and temperature, including the appropriate Debye-Hückel term. A Specific Interaction Theory (SIT) approach was also attempted. The former approach yielded the following values of log?₁₀ K _sn (infinite dilution) at 25?°C: ?(7.4±0.2) for n=4; ?(9.1±0.1) for n=5; ?(14.1±0.3) for n=6; and ?(23.9±0.6) for n=7. Given the experimental uncertainties (2σ), it is interesting to note that the effect of ionic strength only exceeded the combined uncertainties significantly in the case of log?₁₀ K _s6 to I _m =1.0 mol?kg^?1, such that these values may be of use by defining their magnitudes in other media. Values of Δ _f G ^o, Δ _f H ^o, S ^o and \(C_{p}^{\mathrm{o}}\) (298.15 K, 0.1 MPa) for each hydrolysis product were calculated and tabulated.

     

A molecular dynamics simulation of H<Subscript>3</Subscript>PO<Subscript>4</Subscript>, H<Subscript>2</Subscript>PO<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack>, and the protonated form of N,N-dimethylformamide in liquid N,N-dimethylformamide

The molecular dynamics simulation method was for the first time used to study the structural and energy parameters of H₃PO₄, H₂PO₄⁻, and (DMFA)H⁺ (protonated dimethylformamide) in liquid N,N-dimethylformamide. The predominant orientation of the nearest neighbors of H₃PO₄, H₂PO₄⁻, DMFA, and (DMFA)H⁺ was determined from ranked distribution functions. The most probable structure of H-bonded complexes was obtained. It was shown that H₃PO₄ formed H-bonds with two DMFA molecules, and and (DMFA)H⁺ formed H-bonds with one molecule. The dependence of Coulomb interaction energies on the distance between H₃PO₄, H₂PO₄⁻, (DMFA)H⁺, and DMFA had the form of damped oscillations, as is characteristic of intermolecular interactions in pure DMFA. The molecular dynamics simulation of the H₂PO₄⁻-(DMFA)H⁺-DMFA ternary system showed a high probability of the formation of contact ion pairs.     

Structure of sulfanilamide-containing cobalt(III) dioximates with the [ZrF<Subscript>6</Subscript>]<Superscript>2−</Superscript> and [BF<Subscript>4</Subscript>]<Superscript>−</Superscript> anions

The complexes [Co(DH)₂(Sam)₂]₂[ZrF₆]·5H₂O (I) and [Co(DH)₂(Sam)₂][BF₄]·H₂O (II), where DH^? is the dimethylglyoxime monoanion, and Sam is para-aminobenzenesulfamide (sulfanilamide, white streptocid), were synthesized, and their crystal structures were determined by X-ray diffraction analysis. The coordination polyhedron of the Co³⁺ atom is an N₆ octahedron formed by four nitrogen atoms of the two dimethylglyoxime residues and two nitrogen atoms of the Sam fragments. The latter are realized in virtually parallel orientation relative to the polyhedron of the metal atom and its equatorial plane; the average value of the dihedral angles is 26.8(1)°, and there is π-π interaction between the benzene rings of the Sam fragments and the π delocalized equatorial metallocycle. The deviation of the cobalt atom from the four-angle plane is up to 0.009(1) Å. The (Co-N)_DH? and (Co-N)_Sam distances in the [Co(DH)₂(Sam)₂]⁺ complex cations vary from 1.892(2) Å to 1.907(3) Å and from 2.000(2) Å to 2.012(2) Å, respectively. The [ZrF₆]^2? and [BF₄]^? complex anions play the major role in crystal formation; they produce a substantial effect on the formation of a complex system of hydrogen bonds.     

Study on nonlinear kinetic and thermodynamics of oscillating reaction of amino Acid-BrO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>-Mn<Superscript>2+</Superscript>-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-acetone system

With the help of the kinetic parameters (the rate constant (k _in k _p) and the apparent activation energy (E _in E _p) of the oscillatory induction period and oscillation period) of the oscillating reaction using thirteen amino acids, leucine (Leu), threonine (Thr), arginine (Arg), lysine (Lys), histidine (His), alanine (Ala), glutamine (Glu), glycine (Gly), methionine (Met), cystine (Cys), tryptophan (Trp), serine (Ser) and tyrosine (Tyr), as organic substrates in amino acid-BrO₃⁻-Mn²⁺-H₂SO₄-acetone system, then based on the Oregonator model and the thermodynamics theory on irreversible process, the thermodynamic function (ΔH _in, ΔG _in, ΔS _in and ΔH _p, ΔG _p, ΔS _p) of these oscillating system are studied. The results indicate the entropy ΔS of these oscillating reaction are negative, thereby it is proved that the oscillating reaction is a noequilibrium system with dissipation structure in agreement with the character of the oscillating reaction from disorder to order in irreversible thermodynamics. These are satisfactorily to explain the experimental phenomena.     

Study on the thermal behavior of the complexes of the type [PdX<Subscript>2</Subscript>(tdmPz)] (X = Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, I<Superscript>−</Superscript>, SCN<Superscript>−</Superscript>)

Four new mononuclear Pd(II) complexes of the type [PdX₂(tdmPz)] {X = Cl⁻ (1); Br⁻ (2); I⁻ (3); SCN⁻ (4); tdmPz = 1-thiocarbamoyl-3,5-dimethylpyrazole} have been synthesized and characterized by elemental analysis, IR spectroscopy, ¹H and ¹³C{¹H}-NMR experiments. The thermal behavior of the complexes 1–4 has been investigated by means of thermogravimetry (TG) and differential thermal analysis (DTA). From the initial decomposition temperatures, the thermal stability of the complexes can be ordered in the sequence: 3 < 4 ≡ 2 < 1. The final products of the thermal decompositions were characterized as metallic palladium by X-ray powder diffraction.     

Synthesis and Structure of the bismuth complex [Ph<Subscript>3</Subscript>PrP]<Stack><Subscript>4</Subscript><Superscript>+</Superscript></Stack>[Bi<Subscript>4</Subscript>I<Subscript>16</Subscript>]<Superscript>4−</Superscript>

The complex [Ph₃P] ₄ ⁺ [Bi₄I₁₆]^4? · 2 Me₂C=O (I) was synthesized by the reaction of triphenyl(propyl)phosphonium iodide with bismuth iodide in acetone. The crystal structure of complex I was determined by X-ray crystallography. It contains, in addition to solvent molecules, two types of crystallographically independent tetrahedral tetraphenyl(propyl)phosphonium cations and tetranuclear anions [Bi₄I₁₆]^4? in a chair conformation with the bismuth atoms being in an octahedral coordination. The Bi-I distances in the anion vary within 2.8768(4)–3.2524(4) Å.