Protein extraction and 2-DE of water- and lipid-soluble proteins from bovine pericardium, a low-cellularity tissue

Bovine pericardium (BP) is an important biomaterial used in the production of glutaraldehyde-fixed heart valves and tissue-engineering applications. The ability to perform proteomic analysis on BP is useful for a range of studies, including investigation of immune rejection after implantation. However, proteomic analysis of fibrous tissues such as BP is challenging due to their relative low-cellularity and abundance of extracellular matrix. A variety of methods for tissue treatment, protein extraction, and fractionation were investigated with the aim of producing high-quality 2-DE gels for both water- and lipid-soluble BP proteins. Extraction of water-soluble proteins with 3-(benzyldimethylammonio)-propanesulfonate followed by n-dodecyl beta-D-maltoside extraction and ethanol precipitation for lipid-soluble proteins provided the best combination of yield, spot number, and resolution on 2-DE gels (Protocol E2). ESI-quadrupole/ion trap or MALDI-TOF/TOF MS protein identifications were performed to confirm bovine origin and appropriate subcellular prefractionation of resolved proteins. Twenty-five unique, predominantly cytoplasmic bovine proteins were identified from the water-soluble fraction. Thirty-two unique, predominantly membrane bovine proteins were identified from the lipid-soluble fraction. These results demonstrated that the final protocol produced high-quality proteomic data from this important tissue for both cytoplasmic and membrane proteins.     

A simple protocol for protein extraction of recalcitrant fruit tissues suitable for 2-DE and MS analysis

Fruit tissues are considered recalcitrant plant tissue for proteomic analysis. Three phenol-free protein extraction procedures for 2-DE were compared and evaluated on apple fruit proteins. Incorporation of hot SDS buffer, extraction with TCA/acetone precipitation was found to be the most effective protocol. The results from SDS-PAGE and 2-DE analysis showed high quality proteins. More than 500 apple polypeptides were separated on a small scale 2-DE gel. The successful protocol was further tested on banana fruit, in which 504 and 386 proteins were detected in peel and flesh tissues, respectively. To demonstrate the quality of the extracted proteins, several protein spots from apple and banana peels were cut from 2-DE gels, analyzed by MS and have been tentatively identified. The protocol described in this study is a simple procedure which could be routinely used in proteomic studies of many types of recalcitrant fruit tissues.     

A novel method of protein extraction from perennial Bupleurum root for 2-DE

The perennial Bupleurum root is thick and woody and contains high levels of interfering compounds. Common protein extraction methods have proved refractory towards the isolation of proteins suitable for 2-DE, due to the presence of interfering compounds. A novel method for extracting proteins suitable for 2-DE was established to overcome these problems. The main characteristic of this protocol is the partitioning of the proteins into the aqueous (fraction A-2), chloroform and isoamyl alcohol phases (A-3), and the interphase (A-1). The proteins are then extracted from each of these phases. From A-1, 85% (extracted protein against total proteins) proteins could be extracted and purified. For fraction A-2, a novel phenol extraction step is employed for the extraction of proteins. Based on the well-resolved 2-DE patterns, our protein preparation is free of interfering compounds. Using these methods (A-1, A-2, and A-3-3), a total of 3662 (1526 + 1128 + 1008) spots could be separated, and a protein yield of about 1.41 mg per 1.0 g fresh root material was obtained. To our knowledge, this is the first time that a protocol for protein extraction from perennial Bupleurum root has been reported that gives reproducible results. The protocol is expected to be applicable to other recalcitrant plant tissues as well.     

Comparative evaluation of five protocols for protein extraction from stony corals (Scleractinia) for proteomics

Corals especially the reef‐building species are very important to marine ecosystems. Proteomics has been used for researches on coral diseases, bleaching and responses to the environment change. A robust and versatile protein extraction protocol is required for coral proteomics. However, a comparative evaluation of different protein extraction protocols is still not available for proteomic analysis of stony corals. In the present study, five protocols were compared for protein extraction from stony corals. The five protocols were TRIzol, phenol‐based extraction (PBE), trichloroacetic acid (TCA)‐acetone, glass bead‐assisted extraction (GBAE) and a commercially available kit. PBE, TRIzol and the commercial kit were more robust for extracting proteins from stony corals. The protein extraction efficiency and repeatability, two dimensional electrophoresis (2‐DE) and matrix‐assisted laser desorption/ionization time of flight mass spectrometry (MALDI TOF MS) were employed to evaluate the protocols. The results indicated that PBE protocol had the better protein extraction efficiency than the others. Protein extraction coverage varied among the procedures. Each protocol favored for certain proteins. Therefore, it is very important for coral proteomic analysis to select a suitable protein protocol upon the experimental design. In general, PBE protocol can be the first choice for extracting proteins from stony corals.     

2-DE and MALDI-TOF-MS analysis of therapeutic fusion protein abatacept

2-DE and MALDI-TOF MS are useful techniques for the quality evaluation of medicinal products derived from recombinant DNA technology. The principal objective of this study has been to evaluate the suitability of 2-DE in combination with MALDI-TOF MS for the quality study of the therapeutic recombinant protein, abatacept. 1-DE SDS-PAGE, under reducing and nonreducing conditions, and 2-DE analysis were used for the assessment of M(r) , pI, and enzymatic deglycosylation efficiency of abatacept. 2-DE allowed the assessment of product identity, purity, charge heterogeneity, isoform pattern, and post-translational modifications. Furthermore, optimization of the deglycosylation procedure, charge heterogeneity, and sample preparation for the subsequent MALDI-TOF MS analysis has been addressed. PMF analysis allowed rapid identity confirmation of abatacept.     

High MS-compatibility of silver nitrate-stained protein spots from 2-DE gels using ZipPlates and AnchorChips for successful protein identification

The availability of easy-to-handle, sensitive, and cost-effective protein staining protocols for 2-DE, in conjunction with a high compatibility for subsequent MS analysis, is still a prerequisite for successful proteome research. In this article we describe a quick and easy-to-use methodological protocol based on sensitive, homogeneous, and MS-compatible silver nitrate protein staining, in combination with an in-gel digestion, employing the Millipore 96-well ZipPlate system for peptide preparation. The improved quality and MS compatibility of the generated protein digests, as compared to the otherwise weakly MS-compatible silver nitrate staining, were evaluated on real tissue samples by analyzing 192 Coomassie-stained protein spots against their counterparts from a silver-stained 2-DE gel. Furthermore, the applicability of the experimental setup was evaluated and demonstrated by the analysis of a large-scale MALDI-TOF MS experiment, in which we analyzed an additional ~1000 protein spots from 2-DE gels from mouse liver and mouse brain tissue.     

Alkaline extraction of human plasma proteins from nondenaturing micro-2-D gels for protein/polypeptide mass measurement and peptide mass fingerprinting using MALDI-TOF MS

Previously, we have reported a high-efficiency method of protein extraction from CBB-stained polyacrylamide gels for molecular mass measurement with MALDI-TOF MS [1]. In the present work, the alkaline extraction method was applied to CBB-stained 2-DE gels on which human plasma proteins were separated in the absence of denaturant. In order to examine the performance of the method, ten spots with apparent molecular masses (MMapp) in the range of 65 to 1000 kDa were selected and the proteins were extracted from the gel pieces. The extracts were subjected to whole-mass measurement by MALDI-TOF MS, with and without DTT treatment. In addition, the extracts were subjected to in-solution trypsin digestion followed by MALDI-TOF MS and PMF analysis. Successful extraction of proteins from the ten spots, up to MMapp 1000 kDa, has been ascertained by the significant PMF assignment (MASCOT) with high sequence coverage of the respective proteins or polypeptides. When direct mass measurement of the extracted proteins was attempted, three spots in MMapp range 65-100 kDa provided mass peaks. Five spots in MMapp range 150-400 kDa did not give mass peaks of the intact proteins, but showed those of the constituent polypeptides after the DTT treatment. Extraction of proteins prior to trypsin digestion enabled the procedure of PMF analysis to be much simpler than the conventional in-gel digestion method, providing comparable protein scores and sequence coverage. The technique presented here suggests a new strategy for the characterization of proteins separated by nondenaturing 2-DE.     

Protein extraction from Phoenix dactylifera L. leaves, a recalcitrant material, for two-dimensional electrophoresis

This work was aimed at optimizing a protein extraction procedure for date palm (Phoenix dactylifera L.) leaves, a highly recalcitrant plant tissue for 2-DE. Five protein extraction protocols based on different protein precipitation agents (TCA/acetone vs. phenol (Ph) methods) and protein resolubilization methods (physical treatments, e.g., sonication, shaking and/or heating) were tested. Ph/SDS extraction with methanol/ammonium acetate precipitation, followed by DOC preincubation and TCA/acetone precipitation and, finally, solubilization by shaking in rehydration solution was found to be the best protein extraction method. We conclude that DOC with TCA/acetone precipitation step eliminates interfering compounds, thus allowing efficient resolubilization of date palm leaf proteins. This method could be appropriate for proteomic studies such as date palm colonization by entomopathogenic fungi.     

Alteration of protein profile in rat liver of animals exposed to subacute diazinon: A proteomic approach

Diazinon, an organophosphorus insecticide, is employed to control pests in agriculture. Diazinon may contaminate the environment during the manufacturing process or agricultural application. Previous studies have revealed that diazinon may induce alteration in the protein profile of the liver. Here, a proteomics approach was used to investigate the effects on the protein profile in the liver of rats of subacute oral exposures at 15 mg/kg of diazinon. Liver proteins were separated using 2D‐PAGE, and stained by MS‐compatible silver staining and/or the fluorescent SYPRO® Ruby protein gel stain. Gels were scanned and analyzed using the Image Master software. Differentially displayed protein species were identified using MALDI‐TOF/TOF and MASCOT software. Significantly altered protein species were identified to be involved in apoptosis, cell metabolism, transport, and antioxidant systems. Exposure to diazinon decreased levels of some species of catalase, peroxiredoxin‐6, 3‐ketoacyl‐CoA thiolase, and glucose regulated protein78, whereas the level of protein disulfide‐isomerase A3 increased. Our results suggested that diazinon may induce hepatotoxicity through oxidative stress, apoptosis, and metabolic disorders in rat liver.     

An efficient protein preparation for proteomic analysis of developing cotton fibers by 2-DE

Preparation of high-quality proteins from cotton fiber tissues is difficult due to high endogenous levels of polysaccharides, polyphenols, and other interfering compounds. To establish a routine procedure for the application of proteomic analysis to cotton fiber tissues, a new protocol for protein extraction was developed by optimizing a phenol extraction method combined with methanol/ammonium acetate precipitation. The protein extraction for 2-DE was remarkably improved by the combination of chemically and physically modified processes including polyvinylpolypyrrolidone (PVPP) addition, acetone cleaning, and SDS replacement. The protocol gave a higher protein yield and vastly greater resolution and spot intensity. The efficiency of this protocol and its feasibility in fiber proteomic study were demonstrated by comparison of the cotton fiber proteomes at two growth stages. Furthermore, ten protein spots changed significantly were identified by MS/tandem MS and their potential relationships to fiber development were discussed. To the best of our knowledge, this is the first time that a protocol for protein extraction from cotton fiber tissues appears to give satisfactory and reproductive 2-D protein profiles. The protocol is expected to accelerate the process of the proteomic study of cotton fibers and also to be applicable to other recalcitrant plant tissues.     

Evaluation of extraction procedures for 2‐DE analysis of aphid proteins

Protein sample preparation is a crucial step in a 2‐DE proteomics approach. In order to establish a routine protocol for the application of proteomics analysis to aphids, this study focuses on the specific protein extraction problems in insect tissues and evaluates four methods to bypass them. The approaches of phenol extraction methanol/ammonium acetate precipitation (PA), TCA/acetone precipitation, PEG precipitation, and no precipitation were evaluated for proteins isolation and purification from apterous adult aphids, Sitobion avenae. For 2‐DE, the PA protocol was optimal, resulting in good IEF and clear spots. PA method yielded the greatest amount of protein and displayed most protein spots in 2‐DE gels, as compared with the TCA/acetone precipitation, PEG precipitation and no precipitation protocols. Analysis of protein yield, image quality and spot numbers demonstrate that the TCA/acetone precipitation protocol is a reproducible and reliable method for extracting proteins from aphids. The PEG precipitation approach is a newly developed protein extraction protocol for aphids, from which more unique protein spots can be detected, especially for detection of acid proteins. These protocols are expected to be applicable to other insects or could be of interest to laboratories involved in insect proteomics, despite the amounts and types of interfering compounds vary considerably in different insects.     

IPG with electrodic plateaus (and other unusual procedures for 2-DE)

We describe some simple changes to the geometry of the IPG strips that make them suitable to the loading of very large sample volumes and of high-salt solutions. Of special relevance is the possibility of using strips with immobilized plateau(s) to either side of the gradient, or to both, also in connection with in-gel rehydration protocols and focusing in stock trays. The only requirement to achieve this is to leave the all-ready-made attitude and go back to custom polymerization of the IPGs in one's laboratory.     

Application of pressure cycling technology to tissue sample preparation for 2-DE

2-DE is a powerful protein analytical tool whose major strengths include semiglobal quantitation and charge separation of complex protein mixtures, enabling the analysis of differential protein expression, and variable post-translational modification. One of 2-DE's limitations relates to its limited dynamic range and consequently the number of proteins expressed that can be analyzed on a single gel. In an attempt to improve the yield of detectable proteins during sample preparation, we applied a novel extraction technique called pressure cycling technology.     

Protein extraction for two-dimensional electrophoresis from olive leaf,a plant tissue containing high levels of interfering compounds

The purpose of this research is to establish a routine procedure for the application of proteomic analysis to olive tree. Olive leaf tissue is notoriously recalcitrant to common protein extraction methods due to high levels of interfering compounds. We developed a protocol for isolating proteins suitable for two-dimensional electrophoresis (2-DE) from olive leaf. The remarkable characteristics of the protocol include: (i) additional grinding dry acetone powder of leaf tissue to a finer extent, (ii) after extensive organic solvent washes to remove pigments, lipids etc., using aqueous tricholoroacetic acid washes to remove water-soluble contaminants, and (iii) phenol extraction of proteins in the presence of sodium dodecyl sulfate. The final protein preparation is free of interfering compounds based on its well-resolved 2-DE patterns. The protocol can be completed within 3 h, and protein yield is approximately 2.49 mg.g(-1) of aged leaf. We also evaluated the protocol by immunoblotting with anti-tyrosinate alpha-tubulin antibody. To our knowledge, this is the first time that a protocol for protein extraction from olive leaf appears to give satisfactory and reproducible results. The protocol is expected to be applicable to other recalcitrant plant tissues and could be of interest to laboratories involved in plant proteomics.     

Performance of nondenaturing micro 2-DE followed by third-dimension SDS-PAGE in the analysis of Escherichia coli soluble proteins

In a previous paper, we reported on the analysis of Escherichia coli (strain K‐12) soluble proteins by nondenaturing micro 2‐DE/3‐DE and MALDI‐MS‐PMF [Manabe, T., Jin, Y., Electrophoresis 2010, 31, 2740–2748]. To evaluate the performance of the 2‐DE/3‐DE technique, a nondenaturing 2‐DE gel just after the second‐dimension run was cut into 12 vertical strips, each 2 mm‐wide strip was set on a micro slab gel, and third‐dimension SDS‐PAGE was run in parallel. Each of the twelve 3‐DE gels showed about 150–200 CBB‐stained spots. Two of the 3‐DE gels were selected for the assignment of polypeptides using MALDI‐MS‐PMF and totally 161 polypeptides were assigned on the two 3‐DE gels, in which 81 have been assigned on the nondenaturing micro 2‐DE gel and 80 were newly assigned. Most of the newly assigned polypeptides resided in faintly stained spots on the 3‐DE gels, which indicates that the polypeptides were purified in the process of the third‐dimension separation. The comparisons of the apparent mass values estimated from the second‐dimension (nondenaturing pore‐gradient PAGE) mobility with those estimated from the third‐dimension (SDS‐PAGE) mobility suggested the oligomer structures of the assigned polypeptides and they matched well with those described in a database (UniProtKnowledgebase). The technique of nondenaturing micro 2‐DE/3‐DE, combined with MALDI‐MS‐PMF, could become an efficient method to obtain information on the quaternary structures of hundreds of cellular soluble proteins simultaneously because of its high efficiency in protein/polypeptide separation and assignment.     

Improved solubilization of surface proteins from Listeria monocytogenes for 2-DE

Solubilization of bacterial surface (cell wall and membrane-associated) proteins for 2-DE is challenging, particularly in the case of Gram-positive bacteria. This is primarily due to strong protein association with the cell wall peptidoglycan and protein hydrophobicity. We solubilized surface proteins for 2-DE from the Gram-positive pathogen Listeria monocytogenes using mutanolysin, which digests cell wall peptidoglycan, and one of three different mixtures of zwitterionic detergent and chaotropes: (i) CHAPS/urea, (ii) amidosulfobetaine-14 (ASB-14)/urea/thiourea (iii) N-decyl-N,N'-dimethyl-3-ammonio-1-propanesulfonate/urea/thiourea. Cell lysis with mutanolysin followed by solubilization with ASB-14/urea/thiourea gave the highest overall protein yield with the best 2-DE resolution. Protein spot identification by MALDI-TOF/TOF-MS analysis revealed 29 characterized surface proteins of L. monocytogenes, 17 of which have not previously been reported on the surface proteome map. This is the first report describing the successful solubilization and 2-DE of L. monocytogenes proteins bound to the cell surface via an LPXTG motif or by a hydrophobic tail. The increase in surface proteome coverage obtained by mutanolysin and ASB-14/urea/thiourea solubilization suggests the utility of this method for future analytical and comparative studies of surface proteins from Listeria, and possibly other Gram-positive bacteria, using 2-DE proteomic analysis. An updated 2-DE reference map of L. monocytogenes surface proteins is presented.     

Efficient extraction of proteins from recalcitrant plant tissue for subsequent analysis by two‐dimensional gel electrophoresis

Protein extraction for two‐dimensional electrophoresis from tissues of recalcitrant species is quite problematic and challenging due to the low protein content and high abundance of contaminants. Proteomics in Shorea robusta is scarcely conducted due to the lack of a suitable protein preparation procedure. To establish an effective protein extraction protocol suitable for two‐dimensional electrophoresis in Shorea robusta, four procedures (borate buffer/trichloroacetic acid extraction, organic solvent/trichloroacetic acid precipitation, sucrose/Tris/phenol, and organic solvent/phenol/sodium dodecyl sulfate) were evaluated. Following these, proteins were isolated from mature leaves and were analyzed for proteomics, and also for potential contaminants, widely reported to hinder proteomics. The borate buffer/trichloroacetic acid extraction had the lowest protein yield and did not result in any banding even in one‐dimensional electrophoresis. In contrast, organic solvent/phenol/sodium dodecyl sulfate extraction allowed the highest protein yield. Moreover, during proteomics, organic solvent/phenol/sodium dodecyl sulfate extracted protein resolved the maximum number (144) of spots. Further, when proteins were evaluated for contaminants, significant (77–95%) reductions in the nucleic acids, phenol, and sugars were discernible with refinement in extraction procedure. Accumulated data suggested that the organic solvent/phenol/sodium dodecyl sulfate extraction was the most effective protocol for protein isolation for proteomics of Shorea robusta and can be used for plants that have a similar set of contaminants.     

Sugarcane proteomics: Establishment of a protein extraction method for 2‐DE in stalk tissues and initiation of sugarcane proteome reference map

Sugarcane is an important commercial crop cultivated for its stalks and sugar is a prized commodity essential in human nutrition. Proteomics of sugarcane is in its infancy, especially when dealing with the stalk tissues, where there is no study to date. A systematic proteome analysis of stalk tissue yet remains to be investigated in sugarcane, wherein the stalk tissue is well known for its rigidity, fibrous nature, and the presence of oxidative enzymes, phenolic compounds and extreme levels of carbohydrates, thus making the protein extraction complicated. Here, we evaluated five different protein extraction methods in sugarcane stalk tissues. These methods are as follows: direct extraction using lysis buffer (LB), TCA/acetone precipitation followed by solubilization in LB, LB containing thiourea (LBT), and LBT containing tris, and phenol extraction. Both quantitative and qualitative protein analyses were performed for each method. 2‐DE analysis of extracted total proteins revealed distinct differences in protein patterns among the methods, which might be due to their physicochemical limitations. Based on the 2‐D gel protein profiles, TCA/acetone precipitation‐LBT and phenol extraction methods showed good results. The phenol method showed a shift in pI values of proteins on 2‐D gel, which was mostly overcome by the use of 2‐D cleanup kit after protein extraction. Among all the methods tested, 2‐D cleanup‐phenol method was found to be the most suitable for producing high number of good‐quality spots and reproducibility. In total, 30 and 12 protein spots commonly present in LB, LBT and phenol methods, and LBT method were selected and subjected to eLD‐IT‐TOF‐MS/MS and nESI‐LC‐MS/MS analyses, respectively, and a reference map has been established for sugarcane stalk tissue proteome. A total of 36 nonredundant proteins were identified. This is a very first basic study on sugarcane stalk proteome analysis and will promote the unexplored areas of sugarcane proteome research.     

A protein extraction method compatible with proteomic analysis for the euhalophyte Salicornia europaea

Protein extraction from plants like the halophyte Salicornia europaea has been problematic using standard protocols due to high concentrations of salt ions in their cells. We have developed an improved method for protein extraction from S. europaea, which allowed us to remove interfering compounds and salt ions by including the chemicals borax, polyvinylpolypyrrolidone, and phenol. The comparative study of this method with several other protocols using NaCl-treated S. europaea shoots demonstrated that this method gave the best distinction of proteins on 2-DE gels. This protocol had a wide range of applications as high yields and good distinction of 1-DE gels for proteins isolated from twelve other plants were rendered. In addition, we reported results of 2-DE using the recalcitrant tissue of the S. europaea roots. We also demonstrated that this protocol is compatible with proteomic analysis as eight specific proteins generated by this method have been identified by MS. In conclusion, our newly developed protein extraction protocol is expected to have excellent applications in proteomic studies of halophytes.     

Design of new amphiphilic triblock copoly(2‐oxazoline)s containing a fluorinated segment

New amphiphilic triblock copoly(2‐oxazoline)s, containing hydrophobic domains with fluorine‐containing blocks, were synthesized. Using microwave radiation as heating source, triblock copolymers with narrow molar mass distributions were obtained by the sequential addition of 2‐ethyl‐2‐oxazoline, 2‐(1‐ethylheptyl)‐2‐oxazoline, and 2‐(2,6‐difluorophenyl)‐2‐oxazoline. The polymers obtained were characterized by size exclusion chromatography, ¹H NMR spectroscopy and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). To investigate the incorporation of all three monomers into the triblock copolymers, a model polymer was prepared with shorter blocks exhibiting a suitable length to be measured in the reflector mode of a MALDI‐TOF MS. In addition, kinetic investigations on the homopolymerizations of all monomers were performed in nitromethane at 140 °C, yielding the polymerization rates under these conditions. DSC measurements of poly(2‐(1‐ethylheptyl)‐2‐oxazoline) and poly(2‐(2,6‐difluorophenyl)‐2‐oxazoline)) revealing glass transitions at about 33 and 120 °C, respectively. The thermal analysis of a blend of the two polymers showed two glass transitions revealing demixing, which could be an indicating for the immiscibility of the two components in the block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010