Mg3Bo3F3:Mn2+, R3+(R=Eu、Sm、Dy)的阴极射线发光

本文研究了具有长余辉发光特性的红色Mg3BO3F3:Mn2+,R3+(R=Eu,Sm,Dy)的阴极射线发光性能,以及R3+离子的掺杂对Mg3BO3F3:Mn2+的发射光谱、色坐标等的影响.     

Dy~(3+)和Tb~(3+)掺杂镓硼锗硅酸盐玻璃发光性能

采用高温熔融法分别制备了高含量Tb~(3+)单掺和Dy~(3+)/Tb~(3+)共掺的镓硼锗硅酸盐(GBSG)发光玻璃,并分析了其光谱性能。根据Dy~(3+)和Tb~(3+)掺杂的镓硼锗硅酸盐(GBSG)玻璃的激发和发射光谱、荧光寿命衰减曲线等特性,探讨了Dy~(3+)与Tb~(3+)之间的能量传递关系。结果表明:玻璃的发光强度和荧光寿命随着Tb~(3+)、Dy~(3+)含量的增加而减少。与相同摩尔浓度的单掺玻璃相比,共掺玻璃发光强度的衰减速率先减慢而后加快。Tb~(3+)、Dy~(3+)离子之间的能量传递方式为无辐射共振能量传递和~4F_(9/2)+~7F_6→~6H_(15/2)+~5D_4交叉弛豫效应。     

Yb3+掺杂浓度对Er3+/Yb3+共掺SiO2-Al2O3-La2O3玻璃光谱性质的影响

测量了不同Yb3+ 离子掺杂浓度下 ,Er3+ /Yb3+ 共掺SiO2 Al2 O3 La2O3玻璃的吸收光谱、荧光光谱和Yb3+离子2 F5/ 2 的能级寿命 ,应用迈克康伯 (McCumber)理论计算了Er3+ 的受激发射截面σemi,讨论了Yb3+ 离子浓度对其自身吸收性质、Er3+ 离子发光性质 ,以及Yb3+ →Er3+ 能量传递效率 (η)的影响 ,初步探明该基质玻璃中Yb3+ 离子掺杂数浓度的最佳范围为 3 .94× 1 0 2 0 cm- 3至 5 .92× 1 0 2 0 cm- 3,在此掺杂范围内 ,Yb3+ 离子的最大吸收系数为9.8cm- 1 ,Er3+ 的峰值发射截面和Yb3+ →Er3+ 能量传递效率 (η)分别为 0 64× 1 0 - 2 4 m2 和 92 %。     

YLiF4: Er3+, Tm3+, Yb3+中Tm3+浓度对上转换发光的影响

利用水热法合成了YLiF4: Er3 , Tm3 , Yb3 , 其中Er3 和Yb3 的浓度保持固定不变, 分别为1 mol%和1.5 mol%, Tm3 浓度变化范围是2 mol%～8 mol%. 在这种共掺杂体系中, 同时观察到了Er3 , Tm3 和Yb3 的吸收, 且Tm3 的吸收随着其浓度的增强而增强. 在980 nm光的激发下, 当Tm3 浓度很小时, 这种材料的上转换发光为白光. 其中蓝光主要来源于Tm3 的激发态1G4到基态3H6的跃迁, 绿光来源于Er3 的4S3/2和2H11/2到基态4I15/2的跃迁, 红光既来源于Tm3 的1G4→3F4的跃迁, 也来源于Er3 的4F9/2→4I15/2的跃迁. 并且这种上转换发光强度随着Tm3 浓度的增强而降低, 但对应不同能级跃迁的发光强度降低的幅度不同, 这是因为Er3 和Tm3 之间的相互作用.     

（LaO）3BO3中Eu^3＋和Sm^3＋的光致发光

研究了紫外光激发下，（ＬａＯ）３ＢＯ３基质中Ｅｕ＾３＋和Ｓｍ＾３＋的光谱性质，Ｅｕ＾３＋和Ｓｍ＾３＋的电荷迁移激发带及发光强度随组成和结构变化的规律性，并探讨了Ｅｕ＾３＋和Ｓｍ＾３＋自身浓度猝灭的机理。     

Tm~(3+)/Er~(3+)/Yb~(3+)掺杂的镓锗酸盐玻璃光谱性能及能量传递

采用熔融淬冷法制备得到透明的Tm~(3+)/Er~(3+)/Yb~(3+)掺杂镓锗钠玻璃。对比研究了808 nm和980 nm激发下Tm_2O_3含量对样品可见-红外光学光谱特性的影响。结合稀土离子能级结构,分析了Tm~(3+)、Er~(3+)和Yb~(3+)离子之间的能量传递机制。结果表明:在808 nm和980 nm的激发下,Tm~(3+)/Er~(3+)/Yb~(3+)掺杂样品中均观察到了473,655,521,544 nm的蓝、红和绿光。在808 nm激发下,随着Tm~(3+)浓度的增加,Tm~(3+):1 800 nm和Er~(3+):1 530 nm发射强度的比率I1.8/I1.53逐渐增大。由于在Tm~(3+)和Er~(3+)间的能量传递有效地改变了红光和绿光的发射强度,473,521,655 nm的发光强度呈现先升高再降低的趋势,在Tm_2O_3掺杂摩尔分数为0.3%时达到最大值。而在980 nm激发下,由于Yb~(3+)对Er~(3+)和Tm~(3+)的能量传递起主要作用,使得其上转换红光(655 nm)、绿光(521 nm和544 nm)和蓝光(473 nm)的发光强度高于808 nm激发下的上转换发光。     

A3M2GeO12石榴石体系中Cr^3＋离子的宽带发射光谱

首次报道在Ａ３Ｍ２Ｇｅ３Ｏ１２：Ｃｒ（Ａ＝Ｃｄ＾２＋,Ｍ＝Ａｌ＾３＋,Ｇａ＾３＋,Ｓｃ＾３＋）锗酸盐石榴石体系中,Ｃｒ＾３＋离子室温下的红－近红外宽发射带光谱性质。随位于八面体格位上的Ａｌ＾３＋→Ｇａ＾３＋→Ｓｃ＾３＋和十二面体格位上的Ｃｄ＾２＋→Ｃａ＾２＋组成顺序变化,室温下,Ｃｒ＾３＋离子的＾４Ｔ２→＾４Ａ２能级跃迁的Ｒ－ＮＩＲ宽发射带,发射峰及光谱的长波和短波边逐渐向低能长波边移动。     

Eu3+在Y2O3-Bi2O3体系中发光性能的研究

Y2O3:Eu3+磷光体中的Eu3+在6100Å附近呈现很强的尖峰发射.这个磷光体虽然在阴极射线和短波紫外光(约2500Å激发下是十分有效的,但是对于长波紫外光激发却很不灵敏.Datta[2]於1967年报导在Y2O3:Eu3+磷光体中加入少量Bi3+,在3650Å长波紫外光激发下可增强Eu3+在6100Å的尖峰发射强度.     

Eu3+在硼酸盐玻璃中的发光以及Bi3+对Eu3+的敏化作用

本文研究了单掺和双掺(Eu3+,Bi3+,Fu3++Bi3+)约二十余种不同成份的硼酸盐玻璃,探讨了玻璃成份对Eu3+发光性质的影响和Bi3+对Eu3+的敏化作用.     

Y2O3纳米晶中两种格位的Eu3+之间的能量传递

讨论了Eu^3 :Y2O3纳米晶在低温下的发光性质。比较了不同颗粒尺寸的Y2O3纳米晶中Eu^3 离子的发射光谱,根据不同温度下的激发谱,分析了处于Y2O3纳米晶中C2和C3i两种格位的激发峰强度随温度的变化,选择激发了不同格位的孤立的Eu^3 离子和处于相邻格位（C3i-C2)的Eu^3 离子对,结果表明,相邻Eu^3 离子对的能量传递速率比孤立的Eu离子之间的能量传递速率快,分析了纳米Eu^3 :Y2O3中猝灭浓度提高的原因。     

镱铒共掺Al2O3薄膜光致发光特性优化

用中频磁控溅射方法在SiO2/Si基底上制备了五组固定掺铒浓度不同镱铒浓度比率的镱铒共掺Al2O3薄膜样品.室温下测量了薄膜在1.430 μm~1.630 μm波段范围内光致发光光谱.研究发现,镱的掺入有效地提高了三价铒离子的光致发光强度,最优的镱铒掺杂为：掺铒0.33 mol%,Yb3+∶Er3+=10∶1,比相同掺铒浓度单掺铒样品光致发光峰值强度增强40倍;确定的掺铒浓度,有着固定的最佳镱铒浓度比率,主要是镱铒离子间的正向和反向能量传递相互作用的结果,但最佳镱铒浓度比率随着掺铒浓度的增加呈现下降趋势;单掺铒薄膜的光致发光峰值强度随掺铒浓度呈现近Gauss形状变化,而最佳镱铒共掺样品的光致发光峰值强度随掺铒浓度呈现了倒Gauss形状变化.     

LaOBr中Ce—Tb、Tm—Er间能量传递的光声光谱和光致发光研究

本文首次报导了发光材料中两个不同稀土离子间能量传递的光声光谱研究。测量了LaOBr:Tb,Ce和LaOBr:Er,Tm体系的光声光谱,结合它们的光致发光特性,讨论了Ce³⁺对Tb³⁺的敏化、Tm³⁺对Er³⁺的猝灭。基质中掺入两种不同稀土离子后光声光谱的变化进一步证实了它们间的能量传递都伴随着多声子过程。分析LaOBr:Er,Tm的光声光谱,对Er³⁺r的红光猝灭的机制提出了新的解释。     

ZBLAN玻璃中Nd~(3+),Tm~(3+),Yb~(3+)的上转换发光特性

采用高温固相法制备了Nd,Tm和Yb掺杂的ZBLAN玻璃上转换材料.Tm3+,Yb3+的摩尔浓度分别固定为0.01%,0.3%,Nd3+摩尔浓度变化范围为0.1%～2%.在室温下,测试了样品在300～1 000nm间的吸收光谱.在798 nm近红外光激发下,测试了样品的上转换光谱.实验发现,样品在798 nm红外光激发下发出了较强的多波段(红,蓝和绿)的可见光.由上转换可见光各波段的发射谱线,给出了能级跃迁机制.蓝光主要来源于Tm3+的激发态1G4到基态3H6的跃迁,绿光来源于Nd3+的2H7/2到基态4I9/2的跃迁,红光来源于Nd3+的2H11/2到基态4i9/2的跃迁.研究发现,在Nd3+,Tm3+,Yb3+:ZBLAN玻璃样品中存在激发态吸收,能最转移和交叉弛豫等上转换过程.其发光机理是Nd3+,TM3+和Yb3+离子之间的能量转移.根据Nd3+摩尔浓度不同其上转换发光强度不同,分析了掺入稀土的浓度对上转换发光效率的影响.当Nd3+浓度为1.5%(摩尔分数)时上转换发光最强,大于1.5%后发光开始减弱.     

Synthesis and Spectroscopic Properties of GdAl3(BO3)4 Poly-crystals Codoped with Yb3+ and Eu3+

GdAl3(BO3)4 polycrystals co-doped with Yb3+ and Eu3+ has been synthesised by combustion method with urea. Upon the excitation at 465 nm (Eu3+/7F6-->5D2 transition), emission bands centered at 590, 613, 697 and 702 nm in the wavelength region of 550-750 nm have clearly been observed, assigned to the electronic transitions of 5D0-->7FJ (J=1, 2, 4 and 5) of Eu3+ ions, respectively. Meanwhile, an intense emission centred at 980 nm along with a shoulder at 1,040 nm has also been observed by exploiting a cross-relaxation process between the transitions of Eu3+/5D0-->7F6 and Yb3+/2F7/2-->2F5/2. On the contrary, an intense red up-conversion emission centred at 613 nm originated from the 5D0-->7F2 transition of Eu3+ has been observed upon excitation with 980 nm laser diode. The quadratic dependence of the red up-conversion intensity on the pump-laser power reveals a cooperative energy transfer mechanism from a pair of Yb3+ ions to one Eu3+ ion.     

激发功率、退火温度及Tm3+浓度对Tm3+/Er3+/Yb3+三掺YF3粉末上转换发光性质的影响

用水热法合成了Tm³⁺/Er³⁺/Yb³⁺三掺杂YF₃上转换发光粉末,并对其进行了结构和形貌表征.对上转换发射谱的研究表明,在相对低激发功率下,可以观察到比较明亮的近白色发光,且随着激发功率的增大,上转换发射强度迅速增大并达到饱和状态,继续增大激发功率,出现发光猝灭现象.退火温度对上转换发射强度的影响表明,随着退火温度的升高,Tm³⁺,Er³⁺的所有特征发射峰均相对增强.上转换发射谱随Tm³⁺浓度变化关系表明,在相对低Tm³⁺掺杂浓度下,Tm³⁺-Er³⁺相互作用占优势,Tm³⁺把能量传递给Er³⁺,Er³⁺发射相对增强;在相对高掺杂浓度下,Tm³⁺-Tm³⁺之间交叉弛豫过程占优势,Er³⁺发射相对减弱.从实验结果看出,该粉末的上转换发光非常丰富,从紫外到红外均有发射,是一种潜在的白色上转换发光及三维固体显示材料.     

Ba2RV3O11(R=Y,Gd,La):Eu3+(或Dy3+,Bi3+)的合成及发光性能的研究

本文报导了Eu3+,Dy3+在Ba2RV3O11(R=Y,Gd,La)基质中的光谱性质、Bi3+对Dy3+发射强度的影响及温度对Dy3+发射强度的猝灭情况.研究了被取代离子R3+(R=Y,Gd,La)对基质电行迁移带、Eu3+的红橙比、Dy3+黄蓝比的影响,还给出了Dy3+的浓度猝灭值.     

Photoluminescence properties and energy transfer in Y_2O_3:Eu~(3+) nanophosphors

The photoluminescence(PL) properties of Y2O3:Eu3+nanophosphors were systematically investigated with the goal of improving the color quality and quantum efficiency of Y2O3:Eu3+nanophosphors for potential applications in nanoscale devices. The emission spectra, excitation spectra and fluorescence decay curves were employed to trace the energy transfer process from Eu3+at C3isite to Eu3+at C2site. The experimental results show that the energy transfer process becomes more and more efficient with the increase in the Eu3+concentration. The emission of Eu3+at C2site is favorable because it has high radiative efficiency and better color quality. The successful suppress of the emission Eu3+at C3iis especially important for its applications in general illumination or display technology. The quantum efficiency and color quality of Y2O3:Eu3+can be improved by controlling the energy transfer between the Eu3+at S6site and Eu3+at C2site.     

掺Ce3+、Tb3+的M3Y2(BO3)4(M＝Ca,Sr)

采用固相反应的方法;经二次灼烧合成了掺Ce3+、Tb3+的Ca3Y2(BO3)4和Sr3Y2(BO3)4磷光体;分析了合成过程中铈的还原情况.用X-射线衍射分析确定了它们的结构均为正交晶系,空间群P21cn测定了Ce3+和Tb3+在两种基质中的光谱,得到Ce3+波长位移的某些规律,观察到Ce3+对Tb3+的敏化作用.     

Broadband near-infrared emission in Er3+-Tm3+ codoped chalcohalide glasses

The near-IR emission spectra of Er3+-Tm3+ codoped 70GeS2-20In2S3-10CsI chalcohalide glasses were studied with an 808 nm laser as an excitation source. A broad emission extending from 1.35 to 1.7 microm with a FWHM of approximately 160 nm was recorded in a 0.1 mol.% Er2S3, 0.5 mol.% Tm2S3 codoped chalcohalide glass. The fluorescence decay curves of glasses were measured by monitoring the emissions of Tm3+ at 1460 nm and Er3+ at 1540 nm, and the lifetimes were obtained from the first-order exponential fit. The luminescence mechanism and the possible energy-transfer processes are discussed with respect to the energy-level diagram of Er3+ and Tm3+ ions.     

Downconversion for Solar Cells in YF3:Pr3+, Yb3+

ABSTRACT

Energy losses in solar cells caused by the spectral mismatch can be reduced by adapting the solar spectrum using a downconversion material where one higher energy visible photon is ‘cut' into two lower energy near-infrared photons that both can be absorbed by the solar cell. Downconversion with the (Pr³⁺, Yb³⁺) couple in YF₃ is investigated. Based on analysis of luminescence and diffuse reflectance spectra it is evident that two-step energy transfer takes place from the ³P₀ level of Pr³⁺ (around 490 nm) exciting two Yb³⁺ to the ²F_5/2 level giving emission around 980 nm. The transfer efficiency increases with Yb³⁺ concentration and is 86% for YF₃ doped with 0.5% Pr³⁺ and 30% Yb³⁺. Due to concentration quenching the intensity of emission from Yb³⁺ is strongly reduced and the ²F_5/2 emission intensity reaches a maximum for the sample with 0.5% Pr³⁺ and 2–5% Yb³⁺ at 300 K. Temperature dependent measurements reveal the role of the Pr^{3+ 1}G₄ level in the energy transfer between Pr³⁺ and Yb³⁺. Back-transfer of excitation energy from the Yb^{3+ 2}F_5/2 level to the ¹G₄ level of Pr³⁺ occurs and quenches the Yb³⁺ emission. The quenching is shown to become more efficient between 4 and 50 K due to faster phonon-assisted energy transfer between the Yb³⁺ donors. Upon raising the temperature from 50 to 300 K, the luminescence life time of the Yb³⁺ emission increases again because the small energy difference between the Pr³⁺ (¹G₄) level and the Yb³⁺ (²F_5/2) level (～300 cm^?1) which makes the ¹G₄ less efficient as a trap for the excitation energy. The present results give insight into factors involved in the concentration quenching in downconversion materials based on the (Pr³⁺, Yb³⁺) couple.