Synthesis of triphenylamine-based thiophene-(N-aryl)pyrrole-thiophene dyes for dye-sensitized solar cell applications

Two new triphenylamine-based metal-free organic dyes (TPTDYE-1 and TPTDYE-2) containing 1-(2,6-diisopropylphenyl)-2,5-di(2-thienyl)pyrrole as a new π-conjugated chromophore were synthesized for dye-sensitized solar cell (DSSC) applications. TPTDYE-1 containing three donor groups around the acceptor group was found to show relatively narrow absorption band from 300 nm to 470 nm while TPTDYE-2 having extended π–π delocalization between the donor and acceptor group showed broad absorption band from 300 nm to 550 nm. The electrochemical studies indicate that the HOMO–LUMO energy gap of TPTDYE-1 is considerably wider than that of TPTDYE-2. The dye-sensitized solar cell performance of each dye was investigated, and the TPTDYE-2-sensitized cell was found to show a maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 75%, a short-circuit photocurrent density (J_sc) of 13.50 mA/cm², an open-circuit voltage (V_oc) of 0.72 V, and a fill factor (FF) of 0.69, corresponding to an overall conversion efficiency of 6.71% under simulated AM 1.5 irradiation (100 mW/cm²). Under the same condition the TPTDYE-1-sensitized cell showed the same IPCE value of 75% with a promising conversion efficiency of 6.00%, a J_sc of 11.11 mA/cm², a V_oc of 0.76 V, and a FF of 0.71.     

Novel organic dyes containing bis-dimethylfluorenyl amino benzo[b]thiophene for highly efficient dye-sensitized solar cell

Novel organic dyes, JK-16 and JK-17 containing bis-dimethylfluorenyl amino benzo[b]thiophene are designed and synthesized. Under standard global AM 1.5 solar condition, the JK-16 sensitized cell gave a short circuit photocurrent density (J_sc) of 15.33 mA cm⁻², open circuit voltage (V_oc) of 0.74 V, and a fill factor of 0.66, corresponding to an overall conversion efficiency η of 7.43%, and the JK-17 sensitized cell gave a J_sc of 12.66 mA cm⁻², V_oc of 0.67 V, and a fill factor of 0.65, corresponding to an overall conversion efficiency η of 5.49%.     

A novel deep eutectic solvent-based ionic liquid used as electrolyte for dye-sensitized solar cells

We utilize a quaternary ammonium salt-derivative ionic liquid called G.CI which is a eutectic mixture of glycerol and choline iodide as electrolyte for dye-sensitized solar cells. Such eutectic compound belongs to a new series of ionic liquid called deep eutectic solvents (DES), which possess many outstanding features compared to the traditional imidazolium-based ionic liquids including cheap raw materials, simple preparation procedures and better biocompatibility. Current–voltage characteristics of the G.CI/PMII-based binary electrolytes stand at 0.533 V on V_oc, 12.0 mA cm^?2 on J_sc, 0.582 on fill factor, and 3.88% cell efficiency under AM 1.5, 100 mW/cm² illuminations. The comparable cell performance together with all the above advantages makes G.CI as a strong candidate for future electrolyte development for dye-sensitized solar cells (DSSCs).     

Photovoltaic characteristics of dye-sensitized surface-modified nanocrystalline SnO2 solar cells

Zinc-modified nanocrystalline SnO₂ electrodes are prepared by chemical treatment of the commercial SnO₂ colloid with zinc acetate and their thickness effects on photovoltaic characteristics are investigated. Open-circuit voltage (V_oc) and fill factor increase with increasing zinc concentration, while short-circuit photocurrent (J_sc) decreases. The normalized incident photon-to-current conversion efficiency (IPCE) shows that increase of zinc concentration utilizes long wavelength light. Concerning the conversion efficiency, optimal concentration within the present experiment is found to be 10 mol.% Zn²⁺ with respect to Sn⁴⁺. As increasing thickness of the films based on 10 mol.% zinc-modified SnO₂ ranging from 0.76 to 8.12 μm, J_sc increases, reaches maximum and then decreases without change in V_oc. The highest conversion efficiency of about 3.4% is achieved under 1 sun of AM 1.5 irradiation for the ∼6.3 μm-thick 10 mol.% zinc-modified SnO₂ film with J_sc of 9.09 mA/cm², V_oc 600 mV and fill factor 62%.     

High-surface-area microporous carbon as the efficient photocathode of dye-sensitized solar cells

This paper reports on the application of cornstalks-derived high-surface-area microporous carbon (MC) as the efficient photocathode of dye-sensitized solar cells (DSCs). The photocathode, which contains MC active material, Vulcan XC–72 carbon black conductive agent, and TiO₂ binder, was obtained by a doctor blade method. Electronic impedance spectroscopy (EIS) of the MC film uniformly coated on fluorine doped SnO₂ (FTO) glass displayed a low charge-transfer resistance of 1.32 Ω cm². Cyclic voltammetry (CV) analysis of the as-prepared MC film exhibited excellent catalytic activity for I₃^?/I^? redox reactions. The DSCs assembled with the MC film photocathode presented a short-circuit photocurrent density (J_sc) of 14.8 mA cm^?2, an open-circuit photovoltage (V_oc) of 798 mV, and a fill factor (FF) of 62.3%, corresponding to an overall conversion efficiency of 7.36% under AM 1.5 irradiation (100 mW cm^?2), which is comparable to that of DSCs with Pt photocathode obtained by conventional thermal decomposition.     

Novel organic sensitizers containing a bulky spirobifluorene unit for solar cell

Three organic sensitizers JK-87, JK-88, and JK-89 containing a bulky spirobifluorene unit in the bridged group are designed and synthesized. Under standard global A.M. 1.5 solar condition, the JK-89 sensitized cell gave a short-circuit photocurrent density (J_sc) of 13.02 mA cm⁻², an open-circuit voltage (V_oc) of 0.75 V, and a fill factor of 0.70, corresponding to an overall conversion efficiency η of 6.83%. The η of JK-89 is higher than those of other two cells due to the larger J_sc. The improved J_sc value is mainly attributed to the broad and red-shifted absorption band.     

Synthesis and photovoltaic properties of organic sensitizers containing electron-deficient and electron-rich fused thiophene for dye-sensitized solar cells

Diverse fused thiophenes with electron-rich and electron-deficient blocks have been synthesized and employed as the π-conjugated spacers of organic dyes for the dye-sensitized solar cells (DSSCs). The effects of these fused thiophenes were investigated by their absorption spectra, electrochemical and photovoltaic properties. For a typical device a maximum power conversion efficiency of 6.11% was obtained under simulated AM 1.5 irradiation (100 mW cm^?2): a short-circuit current (J_SC) of 14.47 mA cm^?2, an open-circuit voltage (V_OC) of 670 mV, and a fill factor (FF) of 0.63.     

Synthesis of conjugated organic dyes containing alkyl substituted thiophene for solar cell

Three organic dyes, JK-41, JK-42, and JK-43 containing bis-dimethylfluoreneaniline and alkyl substituted thiophene unit are designed and synthesized. Under standard global AM 1.5 solar condition, the JK-41 sensitized cell gave a short circuit photocurrent density (J_sc) of 15.23 mA cm⁻², open circuit voltage (V_oc) of 0.67 V, and a fill factor of 0.67, corresponding to an overall conversion efficiency η of 7.69%. Molecular-orbital calculations of the three dyes suggest that the electron distribution moves from the aniline derivative to the cyanoacrylic acid moiety. We found that the power conversion efficiency was shown to be quite sensitive to the structural variations of alkyl substituted thiophene moiety.     

Molecular engineering of organic dyes containing N-aryl carbazole moiety for solar cell

Organic dyes containing N-aryl carbazole moiety are designed and synthesized. Under standard global AM 1.5 solar condition, the JK-25 sensitized cell gave a short circuit photocurrent density (J_sc) of 11.50 mA cm⁻², an open circuit voltage (V_oc) of 0.68 V, a fill factor of 0.66, corresponding to an overall conversion efficiency η of 5.15%, and the maximum incident monochromatic photon-to-current conversion efficiency (IPCE) of 77% at 430 nm.     

Magnetic properties of hybrid organo-inorganic copper(II) oxovanadate(V) phosphate and phosphonate bridged systems

The hybrid organo-inorganic compounds [Cu₄(bipy)₄V₄O₁₁(PO₄)₂]nH₂O (n ∼ 5) (1), [Cu₂(phen)₂(PO₄)(H₂PO₄)₂(VO₂) · 2H₂O] (2) and [Cu₂(phen)₂(O₃PCH₂PO₃)(V₂O₅) (H₂O)]H₂O (3) which present different bridging forms of the phosphate/phosphonate group, show different bulk magnetic properties. We herein analyze the magnetic behaviour of these compounds in terms of their structural parameters. We also report a theoretical study for compound (1) assuming four different magnetic exchange pathways between the copper centres present in the tetranuclear unit. For compound (1) the following J values were obtained J₁ = +3.29; J₂ = −0.63; J₃ = −2.23; J₄ = −46.14 cm⁻¹. Compound (2) presents a Curie–Weiss behaviour in the whole range of temperature (3–300 K), and compound (3) shows a maximum for the magnetic susceptibility at 64 K, typical for antiferromagnetic interactions. These data where fitted using a model previously reported in the literature, assuming two different magnetic exchange pathways between the four copper(II) centres, with J₁ = −30.0 and J₂ = −8.5 cm⁻¹.     

Structural and optical properties of tripod-like ZnO thin film and its application in dye-sensitized solar cell

In this work, we have synthesized Zinc oxide (ZnO) tripods and used its thin film as photoanode in dye-sensitized solar cells. SEM micrographs of the as-prepared sample of ZnO confirmed tripod-like morphology consisting of three cylindrical arms with well-defined ends, joined at a common core. The prepared sample of ZnO tripods was further characterized by EDX, XRD, UV-VIS, and FTIR. The dye N719-sensitized solar cell fabricated with photoanode of ZnO prepared in this work provided the open-circuit photo voltage (V _oc)?=?0.558 V, short-circuit photocurrent (J _sc)?=?6.368 mA?cm^-2, fill factor (FF)?=?0.50, and total conversion efficiency (η)?=?0.88 % under full light illumination (intensity 200 mW?cm^?2). When cell was illuminated by visible light (150 mW/cm²), V _oc?=?0.546 V, J _sc?=?4.437 mA/cm², FF?=?0.54, and η?=?0.88 % were obtained.     

Molecular engineering of organic sensitizers containing indole moiety for dye-sensitized solar cells

Three organic dyes, JK-77, JK-78, and JK-79 containing indole unit are designed and synthesized. Nanocrystalline TiO₂ dye-sensitized solar cells were fabricated using these dyes. Under standard global AM 1.5 solar condition, the JK-79 sensitized solar cell gave a short circuit photocurrent density of 13.62 mA cm⁻², open-circuit voltage of 0.705 V, and a fill factor of 0.74, corresponding to an overall conversion efficiency η of 7.18%. We found that the η of JK-79 was higher than those of other two cells due to the higher V_oc. The improved V_oc value is attributed to the suppression of dark current owing to the blocking effect of a long alkyl chain.     

Synthesis and photovoltaic properties of novel organic sensitizers containing indolo[1,2-f]phenanthridine for solar cell

Organic dyes containing indolo[1,2-f]phenanthridine unit are a promising new class of sensitizers for dye-sensitized solar cells, as a result of their broad and intense visible absorptions. Under standard global AM 1.5 solar condition, the JK-61 sensitized cell gave a short circuit photocurrent density (J_sc) of 15.81 mA cm⁻², an open circuit voltage (V_oc) of 0.73 V, a fill factor of 0.72, corresponding to an overall conversion efficiency of 8.34%.     

Solar cells sensitized by porphyrin dyes containing a substituted carbazole donor with synergistically extended absorption and suppressed the dye aggregation

To achieve high power conversion efficiency (PCE), three porphyrin sensitizers have been synthesized and explored to simultaneously enhance the photocurrent (J_sc) and photovoltage (V_oc). On basis of the XW4, a benzothiadiazole (BTD) unit has been introduced to afford XW57 with the aim to extend the absorption wavelength and enhance the light harvesting ability. As a result, a J_sc of 13.72 mA/cm² has been obtained for XW57, higher than that of XW4. On this basis, XW58 has been prepared by modifying the carbazole-based donor with two bulky dihexyloxyphenyl groups, and the superior anti-aggregation character raises the V_oc from 781 mV (XW4) to 844 mV. When both the BTD unit and the bulky groups are introduced to the acceptor and donor units, respectively, the resulting sensitizer XW59 exhibits a highest PCE value of 7.34% with synergistically enhanced J_sc of 13.19 mA/cm² and V_oc of 793 mV. These results provide further insight into developing high performance dye-sensitized solar cells     

Y-shaped dyes based on triphenylamine for efficient dye-sensitized solar cells

Three new triphenylamine-based dyes with Y-shaped conformation bearing triphenylamino-vinyl, 10-octyl-10H-phenothiazine-vinyl and 9-octyl-9H-carbazole-vinyl as arms (TT, TP, and TC) have been synthesized. From electrochemical investigations it is found that they can be employed in DSSCs due to the balanced HOMO and LUMO energy levels. Notably, the photo-to-electrical conversion efficiency of the DSSCs sensitized with branched TT, TP, and TC reach 5.12%, 4.84%, and 3.63%, which are higher than that sensitized with T (2.79%), and the DSSC sensitized with TT shows higher IPCE response and better photovoltaic performances (J_sc=12.37 mA/cm², V_oc=0.72 V and ff=0.58) than others. These results reveal that the introduction of branched Y-shaped extended π-conjugated donors to D-π-A dyes cannot only enlarge the spectral response range, but also suppress the molecular aggregation on TiO₂ films to a certain extent, which would enhance the performance of DSSCs.     

Synthesis and photovoltaic properties of new [1,2,5]thiadiazolo[3,4-c]pyridine-based organic Broadly absorbing sensitizers for dye-sensitized solar cells

In this paper, by introducing [1,2,5]thiadiazolo[3,4-c]pyridine (PT) as an auxiliary acceptor into the molecular design of organic sensitizers, we have synthesized four new dyes (PT1–PT4) for dye-sensitized solar cells (DSSCs) with triphenylamine or N,N-diphenylthiophen-2-amine as the donor units and thiophene or benzene as the π-bridges, respectively. All the structures, optical and electrochemical properties were fully characterized. Nanocrystalline TiO₂ dye-sensitized solar cells were also fabricated using these dyes. Among them, PT2-based DSSCs showed the highest overall conversion efficiency of 6.11% with V_oc=668 mV, J_sc=12.61 mA cm⁻² and a fill factor (FF)=0.74 after a chenodeoxycholic acid (CDCA) treatment under standard illumination condition (100 mW cm⁻² simulated AM 1.5 solar light).     

Anthracene based organic dipolar compounds for sensitized solar cells

Organic dyes that consist of an anthracene moiety between a triphenylamine donor group and a cyanoacrylic acid acceptor group displayed remarkable solar-to-energy conversion efficiency in dye-sensitized solar cells. The planar geometry of anthracene and its bulky substituents helped the dyes to form a high quality monolayer on the surface of TiO₂. A typical device made with the dye AN-Bu displayed a maximal photon-to-current conversion efficiency (IPCE) 65% in the region of 350–510 nm, a short-circuit photocurrent density (J_sc) 12.78 mA cm⁻², an open-circuit photovoltage (V_oc) 0.73 V, and a fill factor (FF) 0.67, corresponding to an overall conversion efficiency 6.23%. In an experiment of using deoxycholic acid (DCA) as a co-absorbent, the values of V_oc stayed in a similar range, yet the values of J_sc were reduced in ca. 11% due to a decrease of loading amounts. This result indicated that the quality of the dye films cannot be further improved by the adding of DCA. The photophysical properties were analyzed with the aid of a time-dependent density functional theory (TDDFT) model with the B3LYP functional.     

CdSe/TiO2 nanocrystalline solar cells

CdSe sensitized TiO₂ nanocrystalline solar cells were made with the participation of silicotungstic acid (STA) during the deposition of CdSe, the resulting Voc and Isc were 0.23 V cm^-2 and 10 mA cm^-2, respectively. The doping, time and microporous membrane effects were also discussed.     

Synthesis of sensitizers containing donor cascade of triarylamine and dimethylarylamine moieties for dye-sensitized solar cells

Four triarylamine derivatives (XS6-9) containing N,N-dimethylaryl amine units as secondary electron-donating groups are designed and synthesized. These dyes were applied into nanocrystalline TiO₂ dye-sensitized solar cells through standard operations. For a typical device the maximal monochromatic incident photon-to-current conversion efficiency (IPCE) can reach 93%, with a short-circuit photocurrent density (J_sc) 10.8 mA cm⁻², an open-circuit photovoltage (V_oc) 690 mV, and fill factor (FF) 0.61, which corresponds to an overall conversion efficiency of 4.54%.     

Metal-free organic dyes with benzothiadiazole as an internal acceptor for dye-sensitized solar cells

We synthesized three metal-free organic dyes (H11–H13) consisting of a 3,6-disubstituted carbazole, benzothiadiazole, and cyanoacrylic acid. All the dyes exhibited high molar extinction coefficients and suitable energy levels for electron transfer from the electrolyte to the TiO₂ nanoparticles. Under standard AM 1.5G solar irradiation, the device using dye H13 with co-adsorbed chenodeoxycholic acid (CDCA) displayed the best performance: an open-circuit voltage (V_oc) of 0.71 V, a short-circuit current density (J_sc) of 12.69 mA cm⁻², a fill factor (FF) of 0.71, and a power conversion efficiency (PCE) of 6.32%. The PCE was ∼79% of that for commercially available N719 cells (8.02%) under the same conditions.