高聚物从高弹态到流体态的转变

将高聚物由高弹态转变为流体态的转变温度命名为流动温度Tf,该转变温度与高聚物分子量密切相关.在高聚物从高弹态转变为流体态的研究中,由于T1.1的概念忽视对高聚物分子量的依赖性,因此采用Tf的概念更为合理.本文对高聚物的流动温度Tf的讨论涉及高聚物温度-形变曲线、高弹态温区、高聚物熔体剪切粘度.从高聚物凝聚态观点来看,高聚物熔体中凝聚缠结网络中的凝聚结点是分子链的局部向列相互作用使链单元间产生平行凝聚而形成的,而高聚物从高弹态到流体态的转变正是反映了高聚物熔体中凝聚缠结网络的物理交联点,即凝聚结点状态的变化.高聚物熔体可以流动,说明熔体中凝聚网络中的凝聚结点至少是可以在瞬间内打开的,升温使凝聚结点的解凝聚状态存在的时间加长,凝聚状态存在时间减短,当升高到某一温度时,在凝聚结点解凝聚状态的时间内,分子链通过内旋转使质量中心在外加力的方向上可以发生位移,此时高聚物从高弹态转变为流体态,而此时的温度就是流动温度Tf.对高聚物流体弛豫网络的研究,是一个很有前景的研究课题.     

Transition State of Heat Denaturation of Methionine Aminopeptidase from a Hyperthermophile

Heat denaturation of methionine aminopeptidase from a hyperthermophile Pyrococcus furiosus (PfMAP) was studied by differential scanning calorimetry at acid pH. Analysis of the calorimetric data has shown that denaturation of PfMAP is non-equilibrium at heating rates from 0.125 to 2 K min^–1. This means that the protein structure at these conditions is metastable and its stability (the apparent temperature of denaturation T _m) is under kinetic control. It was shown that heat denaturation of this protein is a one-step kinetic process. The enthalpy of the process and its activation energy were measured as functions of temperature. The obtained data allowed us to estimate the heat capacity increment and the change in the number of bound protons during activation of the molecule. The data also suggest that the conformation of PfMAP at the transition state only slightly differs from its native conformation with respect to compactness, hydration extent and hydroxyl protonation. This revised version was published online in July 2006 with corrections to the Cover Date.     

TheT g displacement measurements: A way to foresee the physical behaviour and the use of glassy polymers

The effect of ageing temperature (belowT _g) on physical ageing of glassy PET has been investigated by differential scanning calorimetry. The position of the glass transition endotherm was found to be strongly dependent on the annealing conditions (time, annealing temperature). A single relaxation time model is proposed for the analysis of physical ageing.The variations of the equilibrium relaxation time _iso with annealing temperature allow the determination of the parameters of the model. Finally, using these constants, one can determine the thermal past and foresee the thermal future of unknown samples which are of prime importance in processes using temperatures around the glass transition temperature.

---

Zusammenfassung Mittels DSC wurde der Einfluß der Alterungstemperatur (unterhalbT _g) auf das physikalische Altern von glasartigen PET untersucht. Die Lage der Glasumwandlungsendothermen hängt stark von den Temperungsbedingungen (Dauer, Temperungstemperatur) ab. Es wird ein Relaxationszeitmodell für die Analyse physikalischen Alterns vorgeschlagen.Die Parameter dieses Modelles knnen aus der Änderung der Gleichgewichtsrelaxationszeit _iso mit der Temperungstemperatur ermittelt werden. Unter Benutzung dieser Konstanten kann die thermische Vergangenheit unbekannter Proben bestimmt und die thermische Zukunft derselben vorhergesagt werden, was für Vorgänge bei Temperaturen um den Glasumwandlungspunkt von primärer Wichtigkeit ist.

     

Preparation and properties of imide‐containing elastic polymers from elastic polyureas and pyromellitic dianhydride

A new approach to obtain imide‐containing elastic polymers (IEPs) via elastic and high‐molecular‐weight polyureas, which were prepared from α‐(4‐aminobenzoyl)‐ω‐[(4‐aminobenzoyl)oxy]‐poly(oxytetramethylene) and the conventional diisocyanates such as tolylene‐2,4‐diisocyanate(2,4‐TDI), tolylene‐2,6‐diisocyanate(2,6‐TDI), and 4,4′‐diphenylmethanediisocyanate (MDI), was investigated. IEP solutions were prepared in high yield by the reaction of the polyureas with pyromellitic dianhydride in N‐methyl‐2‐pyrrolidone (NMP) at 165°C for 3.7–5.2 h. IEPs were obtained by the thermal treatment at 200°C for 4 h in vacuo after NMP was evaporated from the resulting IEP solutions. We assumed a mechanism of the reaction via N‐acylurea from the identification of imide linkage and amid acid group in IEP solutions. NMR and FTIR analyses confirmed that IEPs were segmented polymers composed of imide hard segment and poly(tetramethylene oxide) (PTMO) soft segment. The dynamic mechanical and thermal analyses indicated that the IEPs prepared from 2,6‐TDI and MDI showed a glass‐transition temperature (T_g ) at about −60°C, corresponding to T_g of PTMO segment, and suggested that microphase‐separation between the imide segment and the PTMO segment occured in them. TGA studies indicated the 10% weight‐loss temperatures (T₁₀) under air for IEPs were in the temperature range of 343–374°C. IEPs prepared from 2,6‐TDI and MDI showed excellent tensile properties and good solvent resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 715–723, 2000     

Application of open-shell coupled cluster theory to the ground state of GaAs

Summary Theoretical calculations at the coupled cluster level of theory including all single, double and perturbative triple excitations, CCSD(T), are carried out for the^3– ground state of GaAs. Employing a (7s5p3d1f) basis set, the theoretical predictions forr _e (2.560 Å), _e (217 cm^–1),D _e (1.84 eV), and IP (7.80 eV), are in good agreement with recent experimental results. The importance of includingf-type polarization functions in the basis set and the effect of correlating 3d electrons are discussed in detail.     

Small molecule diffusion in a rubbery polymer near Tg: Effects of probe size,shape, and flexibility

A novel experimental approach involving fluorescence nonradiative energy transfer (NRET) is employed to study the Fickian diffusion of small molecules in rubbery poly(isobutyl methacrylate) (PiBMA) films near the glass transition, using a formalism that directly relates the small molecule translational diffusion coefficient, D, to changes in the normalized nonradiative energy transfer efficiency, E_N. Values of D for pyrene, 1,3-bis-(1-pyrene) propane (BPP), 1,3-bis-(1-pyrene) decane (BPD), 9,10-bis-phenyl ethynyl anthracene (BPEA), diphenyl Disperse Red 4 (DPDR4), and decacyclene in PiBMA are measured over temperatures ranging from approximately T_g to T_g + 25°C. Among these chromophores, significant differences in both the magnitude and temperature dependence of D are observed which are attributed to differences in molecule shape and flexibility, as well as molar volume. Other factors being equal, chromophore flexibility was shown both to increase the magnitude of D and to decrease its dependence on temperature, as does an increase in aspect ratio. For BPD, these effects are attributed to the ability of the flexible molecule to diffuse in a piecewise manner, requiring the cooperative mobility of fewer polymer chain segments than a rigid molecule of the same molar volume. For BPEA and DPDR4, this deviation from D being dominated by molar volume effects is attributed the to high aspect ratio of these elongated molecules. © 1996 John Wiley & Sons, Inc.     

Sodium and silver phosphate glasses doped with chlorides of Fe,Mn and Zn

A number of samples of sodium and silver phosphate glasses doped with various compositions of some transition metals viz. iron, manganese and zinc chlorides alongwith undoped samples of sodium and silver phosphate glasses were synthesized and characterized by X-ray diffraction, IR spectral, electrical conductivity and differential scanning calorimetry (DSC). The glass transition temperature (T _g) and crystallization temperature (T _c) values obtained from DSC curves were found to increase with increasing concentration of the dopant Fe/Mn/Zn chlorides in both sodium and silver phosphate glasses and the following sequence is observed: T _g(–FeCl₃)>T _g(–MnCl₂)>T _g(–ZnCl₂) T _c(–FeCl₃)>T _c(–MnCl₂)>T _c(–ZnCl₂) The increase in T _g and T _c values indicate enhanced chemical durability of the doped glasses. The electrical conductivity values and the results of FTIR spectral studies have been correlated with the structural changes in the glass matrix by the addition of different transition metal cations as dopants.     

Photoviscoelastic behavior of amorphous polymers during transition from the glassy to rubbery state

Tensile stress‐relaxation experiments with simultaneous measurements of Young's relaxation modulus, E, and the strain‐optical coefficient, C_?, were performed on two amorphous polymers—polystyrene (PS) and polycarbonate (PC)—over a wide range of temperatures and times. Master curves of these material functions were obtained via the time‐temperature superposition principle. The value of C_? of PS is positive in the glassy state at low temperature and time; then it relaxes and becomes negative and passes through a minimum in the transition zone from the glassy to rubbery state at an intermediate temperature and time and then monotonically increases with time, approaching zero at a large time. The stress‐optical coefficient of PS is calculated from the value of C_?. It is positive at low temperature and time, decreases, passes through zero, becomes negative with increasing temperature and time in the transition zone from the glassy to rubbery state, and finally reaches a constant large negative value in the rubbery state. In contrast, the value of C_? of PC is always positive being a constant in the glassy state and continuously relaxes to zero at high temperature and time. The value of C_σ of PC is also positive being a constant in the glassy state and increases to a constant value in the rubbery state. The obtained information on the photoelastic behavior of PS and PC is useful for calculating the residual birefringence and stresses in plastic products. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2252–2262, 2001     

An empirical relation between oscillator strengths calculated from the dipole length and dipole velocity formalisms in the optical absorption of conjugated molecules

It is found that a ratio between the oscillator strengths of the optical absorption calculated from the dipole length formalism and those calculated from the dipole velocity formalism is almost constant for many conjugated molecules if the calculation is made using the theoretically obtained transition energy. The value of the ratio becomes very sensitive to the molecular geometry if the calculation is made using the experimentally obtained transition energy. The origin of the constancy of the ratio is discussed.     

Nonlinear elastic properties of solid polymers as revealed by Brillouin spectroscopy

In order to study the anharmonic elastic behaviour of solid polymers, we introduce a Brillouin technique, including the appropriate theoretical background, to obtain the complete tensor of elastic stiffness constants of third-order. First results are reported for glassy polycarbonate.This publication is kindly dedicated to Prof. Dr. W. Pechhold on occasion of his 60th birthday.     

Head to head polymers. XVII: Head to head polypropylene

Head to head polypropylene was prepared by catalytic hydrogenation of eithercis-1,4-poly(2,3-dimethylbutadiene) ortrans-1,4-poly(2,3-dimethylbutadiene) with cobalt 2-ethylhexanoate/triethylaluminium as the hydrogenation catalyst in decahydronaphthalene solution. The hydrogenation occurred predominantly bycis hydrogen addition, but was not stereospecific. The samples of head to head polypropylene were characterized by IR and NMR, particularly by¹³C-NMR spectroscopy. The polymers were amorphous and exhibited glass transition temperatures about 20°C lower than that of head to tail poly-propylene; the glass transition temperatures were measured by DSC and varied somewhat from sample to sample (sufficiently high molecular weight) according to their stereochemistry. TheT _gvalues were confirmed by Rheovibron measurements. The thermal stability of head to head polypropylene is not significantly different from that of either atactic or isotactic head to tail polypropylene.Part XVI:Grossman S., Yamada A., Vogl O., J. Macromol. Sci.-Chem.A 16, 897 (1981).     

Application of the CPA equation of state to reservoir fluids in presence of water and polar chemicals

The complex phase equilibrium between reservoir fluids and associating compounds like water, methanol and glycols has become more and more important as the increasing global energy demand pushes the oil industry to target reservoirs with extreme or complicated conditions, such as deep or offshore reservoirs. Conventional equation of state (EoS) with classical mixing rules cannot satisfactorily predict or even correlate the phase equilibrium of those systems. A promising model for such systems is the Cubic-Plus-Association (CPA) EoS, which has been successfully applied to well-defined systems containing associating compounds. In this work, a set of correlations was proposed to calculate the CPA model parameters for the narrow cuts in ill-defined C₇₊ fractions. The correlations were then combined with either the characterization method of Pedersen et al. or that of Whitson et al. to extend CPA to reservoir fluids in presence of water and polar chemical such as methanol and monoethylene glycol. With a minimum number of adjustable parameters from binary pairs, satisfactory results have been obtained for different types of phase equilibria in reservoir fluid systems and several relevant model multicomponent systems. In addition, modeling of mutual solubility between light hydrocarbons and water is also addressed.     

Specific F binding to phenyl ring of aromatic polymers

Most of the hydrogels deswell more remarkably in F⁻ containing solutions than in other monovalent anion containing solutions. However, significant deswelling followed by abnormal reswelling of polymer gel in KF solutions with increasing F⁻ concentration was observed in a series of polymer gels consisted of phenyl rings, for instance, poly(styrene sulfonic acid) (PSSA), hydroxypropyl methylcellulose phthalate (HPMCP) and poly(4-vinyl phenol) (P4VPh) gel. Driving force of this phenomenon was studied to reveal the specific interactions involved in the aqueous systems of aromatic polymers. Elemental analysis and XPS results suggest that F⁻ is embedded to the gel by the physical adsorption of KF, as well as the interactions between phenyl ring and F⁻. Further theoretical calculations revealed that the interaction may be (phenyl)CH?F⁻(H₂O)_n interaction, which is stronger than (phenyl)CH?(H₂O)_n hydrogen bond. This kind of interaction decreases with the increasing water number and it is invalid when the surrounding water number is more than 5 for the phenol-F⁻(H₂O)_n system. Therefore, we conclude that F⁻ could bind to phenyl ring via such (phenyl)CH?F⁻(H₂O)_n interaction in solutions with low hydrophilicity. The strong polarization effect of F⁻ and (phenyl)CH?F⁻(H₂O)_n interaction are two important driving forces for the reswelling of gels.     

Thermal induced phase separation of E7/PMMA PDLC system

The phase behaviour of thermoplastic polymer-dispersed liquid crystal system is studied with particular emphasis on the various transitions that occur within the system. The extent of plasticization of the polymer(polymethyl methacrylate) by the low molecular weight liquid crystal(E7) along with the several transitions of theLC(Liquid Crystal) are determined by modulated DSC. Optical microscopy was used to construct the temperature versus composition phase diagram. Our study indicates the existence of a limiting temperature of 40°C around which the PMMA matrix turns glassy irrespective of the initial composition within the phase separated region, suggesting the intersection of the glass transition curve with the coexistence curve. A slight depression of theN-I(Nematic to Isotropic) transition of theLC is observed with increasing composition of PMMA whereas theS-M(Smectic to Nematic) transition and theT _g (Glass transition temperature) of theLC remain unaffected. The one phase mixture remains isotropic until phase separation at a lower temperature where theLC rich domains become nematic. The growth ofLC rich domains is studied as a function of temperature and time.     

Lipid-similar Thermal Transition of Polyethylene Glycol Alkyl Ether Detergents

A narrow, reversible endothermic main transition is found in the aqueous micellar phase of octaethylene glycol tetradecyl ether (C₁₄E₈) by DSC, characterized by a transition temperature of 41°C and a H value of 0.5 kcal mol^–1, which is not observed by light scattering. This transition is assigned to a cooperative conformational rearrangement of the assembled amphiphilic detergent molecules and not to a micelle aggregation process. It is suggested that the detergents polar head group is primarily involved in this rearrangement.This revised version was published online in November 2005 with corrections to the Cover Date.     

Supercritical fluid extraction ofCymbopogon citratus (DC.) Stapf

Summary Cymbopogon citratus (DC.) Stapf. is also known as lemon grass; its leaves produce a volatile oil upon steam extraction which is used for medicinal purposes. This work describes the supercritical fluid extraction ofCymbopogon citratus in sequential and dynamic extraction modes. Different modifiers for supercritical carbon dioxide were used for the extractions. Principal compounds in the essential oils were analyzed by GC and GC-MS and identified as neral, geraniol, geranial, nerolic acid and geranic acid. Different chromatographic profiles were obtained when the type and proportion of modifier were changed.     

Supercritical fluid chromatography of imidazole derivatives

Summary The aim of this work was to use SFC to separate simple, slightly basic, imidazole derivatives which are used for the synthesis of more complex molecules with therapeutic properties. Control of their purity utilizes separation techniques and this paper shows what SFC can do in comparison with LC which requires derivatization before detection and with GC where peak tailing can be a problem. Our results concern the use of sub-critical mixtures of CO₂ and polar modifiers because imidazole derivatives react with neat CO₂, thus failing to elute from packed columns, and are only partially resolved on capillary columns with neat N₂O. Therefore, separations with CO₂-alcohol-amine-water mixtures on aminopropyl-bonded silica with UV detection are discussed. The resolution and sensitivity limits allow real sample analysis within a very short time.     

侧链液晶聚合物相转变点的分子动力学模拟

液晶基本上可分为３类：向列型液晶、近晶型液晶和胆甾型液晶［１］．液晶材料的相转变温度的预测对选择和设计液晶材料具有非常重要的作用．本文用分子动力学模拟法对聚［ω－（４′－甲氧基联苯－４－氧基）己基］甲基丙烯酸酯（ＰＭ６ＭＰＰ）单链分子进行了研究,模拟...