Turbulent flow and convective heat transfer in a wavy wall channel

This paper reports the numerical modeling of turbulent flow and convective heat transfer over a wavy wall using a two equations eddy viscosity turbulence model. The wall boundary conditions were applied by using a new zonal modeling strategy based on DNS data and combining the standard k– turbulence model in the outer core flow with a one equation model to resolve the near-wall region.It was found that the two-layer model is successful in capturing most of the important physical features of a turbulent flow over a wavy wall with reasonable amount of memory storage and computer time. The predicted results show the shortcomings of the standard law of the wall for predicting such type of flows and consequently suggest that direct integrations to the wall must be used instead. Moreover, Comparison of the predicted results of a wavy wall with that of a straight channel, indicates that the averaged Nusselt number increases until a critical value is reached where the amplitude wave is increased. However, this heat transfer enhancement is accompanied by an increase in the pressure drop.     

Effect of variable thermal conductivity and viscosity on single phase convective heat transfer in slip flow

For a variety of fields in which micro-mechanical systems and electronic components are used, fluid flow and heat transfer at the microscale needs to be understood and modeled with an acceptable reliability. In general, models are prepared by making some extensions to the conventional theories by including the scaling effects that become important for microscale. Some of these effects are; axial conduction, viscous dissipation, and rarefaction. In addition to these effects, temperature variable thermal conductivity and viscosity may become important in microscale gas flows due to the high temperature gradients that may exist in the fluid. For this purpose, simultaneously developing, single phase, laminar and incompressible air flow in a microtube and in the micro gap between parallel plates is numerically analyzed. Navier–Stokes and energy equations are solved and the variation of Nusselt number along the channel is presented in tabular and graphical forms as a function of Knudsen, Peclet, and Brinkman numbers, including temperature variable thermal conductivity and viscosity.     

Radiative and convective heat transfer in hypersonic flow around a blunt body

The heat transfer in the vicinity of the critical point is investigated for hypersonic air flow around a blunt body. The gas-dynamical conservation equations are solved simultaneously with the radiative transport equation in integral form. Allowance is made for the viscosity, heat conduction, and the actual radiation parameters of air, including spectral line emission. Profiles are obtained for the thermodynamic variables along the critical line. The dependence of the radiative and convective components of the aerodynamic heating on the velocity and pressure ahead of the shock front as well as the radius of curvature of the blunt nose section is discussed. Approximate relations having the form of similarity laws are derived for the heat fluxes in the vicinity of the critical point. The limits of applicability of the thermodynamic equilibrium approximation in the shock-compressed layer are discussed. The influence of absorption of radiation from the compressed layer by the cold freestream on the aerodynamic heating is considered. Attention is given in this case to the dependence of the spectral absorption coefficient for the cold air on the intensity of the radiation incident upon it.Moscow. Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 112–123, September–October, 1972.     

Unsteady natural convective flow past a moving vertical cylinder with heat and mass transfer

Transient natural convection boundary layer flow of an incompressible viscous fluid past an impulsively moving semi- infinite vertical cylinder is considered. The temperature and concentration of the cylinder surface are taken to be uniform. The unsteady, nonlinear and coupled governing equations of the flow are solved using an implicit finite difference scheme. The finite difference scheme is unconditionally stable and accurate. Numerical results are presented with various sets of parameters for both air and water. Transient effects of velocity, temperature and concentration profiles are analyzed. Local and average skin friction, rates of heat and mass transfer are shown graphically. Received on 1 November 1999     

Local convective heat transfer for laminar and turbulent flow in a rotor-stator system

Abstract The aim of this work is to show a better comprehension of the flow structure and thermal transfer in a rotor-stator system with a central opening in the stator and without an airflow imposed. The experimental technique uses infrared thermography to measure the surface temperatures of the rotor and the numerical solution of the steady-state heat equation to determine the local heat transfer coefficients. Analysis of the flow structure between the rotor and the stator is conducted by PIV. Tests are carried out for rotational Reynolds numbers ranging from 5.87×10⁴ to 1.4×10⁶ and for gap ratios ranging from 0.01 to 0.17. Analysis of the experimental results has determined the influence of the rotational Reynolds number, the gap ratio and systems geometry on the flow structure, and the convective exchanges in the gap between the rotor and the stator. Some correlations expressing the local Nusselt number as a function of the rotational Reynolds number and the gap ratio are proposed.     

Buoyancy-induced flow and convective heat transfer in an inclined arc-shape enclosure

Numerical and experimental investigations have been conducted to study the flow and heat transfer characteristics for the buoyancy-induced flow inside an inclined arc-shape enclosure. Mathematical model in form of a stream function-vorticity formulation representing the laws of conservation in mass, momentum, and energy is expressed in a curvilinear coordinate frame and solved by a finite-volume discretization method. Heat transfer and flow pattern are predicted at various Grashof numbers and inclination angles. Meanwhile, an experimental system is developed and a flow-visualization technique using smoke is employed to observe the flow pattern. Results show that only when the Grashof number is higher than 10⁵, the increase in natural convection heat transfer becomes appreciable. Both the strength and the pattern of the buoyancy-induced vortex are found to be greatly dependent on the inclination angle. The range of the Grashof number considered in this study is up to 10⁷ and the inclination angle is varied from 0 to π.     

MHD mixed convective heat transfer flow about an inclined plate

Mixed convection heat transfer about a semi-infinite inclined plate in the presence of magneto and thermal radiation effects is studied. The fluid is assumed to be incompressible and dense. The nonlinear coupled parabolic partial differential equations governing the flow are transformed into the non-similar boundary layer equations, which are then solved numerically using the Keller box method. The effects of the mixed convection parameter R _i, the angle of inclination α, the magnetic parameter M and the radiation–conduction parameter R _d on the velocity and temperature profiles as well as on the local skin friction and local heat transfer parameters. For some specific values of the governing parameters, the results are compared with those available in the literature and a fairly good agreement is obtained.     

Effects of outflow boundary condition on convective heat transfer with strong recirculating flow

Three practices of treating outflow boundary condition were adopted in computations for convective heat transfer of a two-dimensional jet impinging in a rectangular cavity. The three practices were local mass conservation method, local one-way method and fully developed assumption. The numerical solutions of the three methods were compared with test data obtained via, naphthalene sublimation technique. It was found that the fully developed assumption was inappropriate, and the local one-way method could provide reasonably good results for the cavity bottom, while for the lateral wall the results with this method qualitatively differed from the test data. The solution with the local mass conservation method was the best. It thus suggested that for a problem expected with a strong recirculating flow at the exit of the computation domain, the local mass conservation method be adopted to treat the outflow boundary condition.     

Finite element analysis of convective heat transfer in porous media

The finite element method is used to analyse convective heat transfer in a porous medium. Convection past a vertical surface embedded in the medium and convection in a confined porous medium enclosure are analysed using the above method. The results are compared with those available in the literature and the agreement is found to be good. The method is applicable for two-dimensional analysis in a porous body of any arbitrary shape. The restriction of the boundary layer assumption is relaxed.     

Turbulent forced convective heat transfer in two-phase evaporating droplet flow through a vertical pipe

A physical model was developed to study heat transfer in turbulent dispersed flow at very high vapor quality in a vertical pipe by numerically solving the coupling governing differential equations for both phases. Major heat transfer mechanisms included in the model were the thermal nonequilibrium effects, droplet vaporization, droplet deposition on the duct wall and thermal radiative transfer. The predicted results indicated that vapor superheating is dominant for the cases with high wall superheat, otherwise droplet vaporization dominates the energy transport processes. Heat transfer during the droplet-wall interaction only exists at low wall superheat but in small amounts.     

Experimental study of convective heat transfer from a rotating finned tube in transverse air flow

 The convective heat transfer from fins to air has been evaluated using rotating annular fins subjected to an air flow parallel to the fins. The fin cooling is studied using infrared thermography. The thermal balance in a fin during its cooling process allows us to obtain the heat transfer coefficient from the temperature time evolution of the fin. Moreover, Particle Image Velocimetry allows us to obtain the flow field in the mid-plane between two fins. The influence of the fin spacing on the convective heat transfer is studied for various velocities of the superposed air flow and various fin rotational speeds. These tests were carried out for air flow Reynolds numbers (based on the shaft diameter and the velocity of the superposed air flow) between 2550 and 18200 and rotational Reynolds numbers (based on the shaft diameter and the peripheral speed) between 800 and 2.9 × 10⁴, for different fin spacings. Received: 14 May 1999/Accepted: 8 October 1999     

Experimental characterization of convective heat transfer with MWCNT based nanofluids under laminar flow conditions

This study describes an investigation on the convective heat transfer performance of aqueous suspensions of multiwalled carbon nanotubes. The results suggested an increase on heat transfer coefficient of 47 % for 0.5 % volume fraction. Moreover, the enhancement observed during thermal conductivity assessment, cannot fully explain the heat transfer intensification. This could be associated to the random movements among the particles through a fluid, caused by the impact of the base fluid molecules.     

Oblique stagnation-point flow and heat transfer towards a shrinking sheet with thermal radiation

An analysis is made of steady two-dimensional oblique stagnation-point flow and radiative heat transfer of an incompressible viscous fluid towards a shrinking sheet which is shrunk in its own plane with a velocity proportional to the distance from a fixed point. Here the axis of the stagnation flow and that of the shrinking sheet are not aligned. A similarity transformation reduces the Navier-Stokes equations to a set of non-linear ordinary differential equations and are solved numerically using a shooting technique. The analysis of the results obtained shows that multiple solutions exist for a certain range of the ratio of the shrinking velocity to the free stream velocity. The effect of non-alignment for the wall shear stress and the horizontal velocity components are discussed. Streamline patterns are also shown for shrinking at the sheet with aligned and non-aligned cases. It is found that the temperature at a point in the fluid decreases with increase in effective Prandtl number (Pr _eff ). The results pertaining to the present study indicate that as Pr _eff increases, the rate of heat transfer also increases. The reported results are in good agreement with the available published work in the literature.     

Visualization of flow pattern and thermal image analysis of enhanced heat transfer surface

Experimental studies on flow visualization and heat transfer measurements of finned surface in a narrow duct were carried out to understand the flow behavior and its effect on heat transfer. In this experiment, short rectangular fins were attached to a surface (endwall) with having inclination angle of 20° and exposed to air flow. Several flow visualization results reveal that horse shoe vortex was formed just at the front of the fin whereas the main longitudinal vortex was formed by the side top edge of the fin. Some important features of the vortex structure, size and flow reattachment positions were noticed from the smoke flow visualization. Detailed heat transfer distributions were discussed from the thermal image. Nusselt number shows that the finned surface achieved average heat transfer enhancement at a factor of four times than that of without fins.     

Reiner-Rivlin nanomaterial heat transfer over a rotating disk with distinct heat source and multiple slip effects

Applied Mathematics and Mechanics - The thermodynamic features of the Reiner-Rivlin nanoliquid flow induced by a spinning disk are analyzed numerically. The non-homogeneous two-phase nanofluid...     

Hydromagnetic convective heat transfer in vertical pipes

In the present analysis, we consider the effect of radial magnetic field on the steady flow produced by the combined free and forced convection in an annulus between two coaxial vertical cylinders. A numerical solution of the problem is obtained by using Runge-Kutta-Merson method. For Rayleigh number Ra<0, that is, when the temperature of the pipes decreases as their height increases, the velocity increases with |Ra|. However, it reduces as the Hartmann number M increases. On the other hand, when Ra>0, there occurs back flow controlled by the effect of the magnetic field. Further, the influence of Rayleigh number and Hartmann number on the temperature is also discussed.Nomenclature c _p specific heat at constant pressure - g acceleration due to gravity - H _r applied magnetic field - H _z induced magnetic field - p pressure - T temperature of the fluid - T ₁, T ₂ temperatures of the inner and outer cylinders at z=0 - U _z velocity - coefficient of volume expansion - density - _w reference density - coefficient of viscosity - _e magnetic permeability - _e electrical conductivity - thermal conductivity - _m magnetic diffusivity     

Radiation effect on forced convective flow and heat transfer over a porous plate in a porous medium

Heat transfer analysis has been presented for the boundary layer forced convective flow of an incompressible fluid past a plate embedded in a porous medium. The similarity solutions for the problem are obtained and the reduced nonlinear ordinary differential equations are solved numerically. In case of porous plate, fluid velocity increases for increasing values of suction parameter whereas due to injection, fluid velocity is noticed to decrease. The non-dimensional temperature increases with the increasing values of injection parameter. A novel result of this investigation is that the flow separation occurred due to suction/injection may be controlled by increasing the permeability parameter of the medium. The effect of thermal radiation on temperature field is also analyzed.     

Boundary layer flow and heat transfer past a stretching plate with variable thermal conductivity

In the present paper, the boundary layer flow of viscous incompressible fluid over a stretching plate has been considered to solve heat flow problem with variable thermal conductivity. First, using similarity transformation, the components of velocity have been obtained. Then, the heat flow problem has been considered in two ways: (i) prescribed surface temperature (PST), and (ii) prescribed stretching plate heat flux (PHF) in case of variable thermal conductivity. Due to variable thermal conductivity, temperature profile has its two part—one mean temperature and other temperature profile induced due to variable thermal conductivity. The related results have been discussed with the help of graphs.