手性流动相添加剂高效液相色谱法分离苯基琥珀酸对映体

以七(2,3,6三-O-甲基)-β-环糊精(TM-β-CD)作为手性流动相添加剂,反相高效液相色谱研究苯基琥珀酸(PSA)对映体拆分;在Nova—pak C18色谱柱上,采用0．30mmol/L TM-β-CD、含0．05％三氟乙酸的乙腈一水(体积比16：84)为流动相,(R)-(-)-PSA和(s)-( )-PSA的容量因子分别为5．43和6．42,对映体分离因子为1．18,分离度为2．50;对比：PSA在β-CD手性流动相法和2,6-丁基化-β-CD涂渍C18柱的色谱行为,探讨环糊精分子对PSA的手性拆分机理：本法已用于测定L-脯氨酸化学拆分苯基琥珀酸对映体产品的光学纯度。     

C18柱串联冠醚手性柱高效分离3种芳香族氨基酸对映体

将C18柱与手性冠醚柱串联,建立了一种反相高效液相色谱法用于3种芳香族氨基酸对映体同时拆分的方法.考察了反相色谱流动相的组成、pH值、柱温、流速对对映体拆分的影响.实验结果表明,当流动相为HClO4-乙睛溶液(86:14,V/V,pH 2.0)、柱温20℃、流速0.4 mL/min时,3种氨基酸对映体可获得基线分离.进一步对比了C18柱、冠醚手性柱和串联顺序不同的4种分离模式,结果表明,C18柱不能拆分氨基酸对映体,仅能分离不同种类氨基酸;冠醚手性柱可分离氨基酸映体,但不同种类氨基酸色谱峰出现重叠;串联模式能实现3种氨基酸对映体的基线分离,实现双柱优势互补,而串联顺序对分离影响不大,仅影响色谱峰的峰形.     

高效液相色谱-串联质谱法结合多糖衍生物手性固定相拆分氰戊菊酯

建立了以多糖衍生物为手性固定相的高效液相色谱-串联质谱(HPLC-MS/MS)直接拆分氰戊菊酯对映体的方法。在反相液相色谱条件下,考察了手性固定相的种类、流动相组成、柱温、流速对氰戊菊酯4个立体异构体分离的影响。同时,利用热力学方法对氰戊菊酯的立体异构体与固定相之间的色谱保留和分离的热力学机理进行了探讨。结果表明:采用Lux Cellulose-3(纤维素-三(4-甲基苯甲酸酯))手性色谱柱,在以流动相为乙腈-水(5 mmol/L甲酸铵)=(55:45,V:V)流速0.4 mL/min,柱温30℃的条件下,可在14 mins内实现氰戊菊酯4个立体异构体的基线分离。拓展了HPLC-MS/MS在菊酯类手性农药对映体分离及检测上的应用。     

2,6-O-丁基-β-环糊精涂渍反相柱高效液相色谱拆分联萘二酚和苯基琥珀酸对映体

利用合成的2,6-O-丁基-β-环糊精动态涂渍反相色谱柱,β—CD在C18和C8填料表面“永久”吸附形成一手性固定相,以联萘二酚和苯基琥珀酸为对象进行高效液相色谱拆分研究。当采用乙腈-水(体积33：67)流动相时,联萘酚对映体在2,6-O-丁基-β-环糊精涂渍Exsil ODS柱上分离的容量因子分别为14．235和15．629,分离选择性为1．098;而采用乙腈-0．1％三氟乙酸水溶液(体积比15：85)流动相时,苯基琥珀对映体的容量因子分别为7．023和8．149,分离选择性为1．160,文中优化了色谱条件,探讨了有关的手性色谱拆分机理。该法可用于实际样品的对映体纯度测定。     

2-戊基-3-苯基-2,3-环氧丙醇对映体在手性柱上的拆分研究

采用多糖类手性固定相,建立2-戊基-3-苯基-2,3-环氧丙醇对映体的高效液相色谱(HPLC)手性分析方法。考察了手性柱类型、流动相组成、流速及柱温对2-戊基-3-苯基-2,3-环氧丙醇对映体拆分的影响。结果表明,以Chiralcel OD-H色谱柱(25×0.46cm,5μm)分离,采用正己烷-异丙醇(V/V,90∶10)作流动相,在流速为0.8 mL·min-1,柱温25℃,检测波长210nm的条件下,2-戊基-3-苯基-2,3-环氧丙醇对映体能达到基线分离,且具有较好的重复性和稳定性,可用于对映体的拆分及质量控制。该方法也适用于2-戊基-3-苯基-2,3-环氧丙醇类似物质的手性拆分。     

9-蒽醛衍生化-高效液相色谱法拆分α-氨基酸甲酯和几种脂肪胺对映体

采用高效液相色谱法,以9-蒽醛为衍生试剂,在5种多糖衍生物的手性固定相(CSPs)上对几种α-氨基酸甲酯对映体进行了手性分离。色谱条件如下: 流动相为含3%～10%(v/v)异丙醇的正己烷溶液,流速为1.0 mL/min,检测波长为254 nm。结果表明,α-氨基酸甲酯-9-蒽醛亚胺衍生物在Chiralcel OD柱或Chiralcel OD-H柱上的手性分离结果优于其他CSPs,而且在Chiralcel OD柱或Chiralcel OD-H柱上全部得到了基线拆分(α=1.24～5.47, Rs=2.56～13.90), L-对映体在这两种色谱柱上的保留强于D-对映体。同时还考察了几种脂肪胺在5种多糖衍生物手性固定相上的对映体拆分效果,结果表明脂肪胺的9-蒽醛亚胺衍生物在Chiralcel OD柱或Chiralcel OD-H柱上的分离效果良好。该法可用于其他α-氨基酸酯和胺类化合物对映体的分析。     

直链淀粉手性固定相拆分富马酸比索洛尔对映体

建立并优化了高效液相色谱手性固定相分离富马酸比索洛尔对映体的方法。使用直链淀粉手性固定相(Chiralpak AD-H柱)在正相条件下拆分了富马酸比索洛尔对映体,考察了达到最佳分离效果时,流动相中极性调节剂的组分、流动相中三乙胺的体积分数以及柱温对富马酸比索洛尔对映体拆分影响。流动相为正己烷/乙醇/三乙胺(90/10/0.1,V/V/V),流速1.0 mL/min,紫外检测波长270 nm,柱温30℃时,两种异构体能达到较好的基线分离,并且不对称合成的(S)-富马酸比索洛尔和(R)-富马酸比索洛尔两种异构体产品,对映体过量(e.e.)均高于99.0%,在此色谱条件下的色谱图峰形良好。方法可广泛用于跟踪手性比索洛尔富马酸盐的合成过程分析和质量控制。     

表面分子印迹聚合物纳米线用于蛋白质的特异性识别

手性配体交换色谱是拆分手性化合物,特别是氨基酸和羟基酸对映体的一种有效方法,通常以光活性氨基酸或其衍生物为手性选择子,可通过键合及涂渍制备手性固定相,也可作为流动相添加剂来实现手性配体交换色谱分离分析,配体交换键合固定相需要完成载体和手性选择子之间的偶联,键合量因受到载体和制备条件的影响而较难控制,且柱效较低。     

β-氨基酸对映体在键合型配体交换色谱固定相上的分离

制备了以L-α-氨基酸为手性配体和球型多孔硅胶为基质的键合型手性配体交换色谱固定相,用于β-氨基酸对映体的拆分。考察了硅胶基质、配体、流动相pH值、中心金属离子浓度和流动相阴离子等因素对5种β-苯丙氨酸对映体分离的影响,由此确立最佳色谱分离条件为以BaseLine硅胶为基质键合L-羟脯氨酸的手性固定相,5.0mmol/L和pH4.6的CuSO4溶液为流动相,紫外检测波长为254nm。在此条件下5种β-氨基酸对映体均可在35min内得到分离,分离因子在1.49~1.77之间。结果表明该方法操作简便,成本低廉,可用于β-氨基酸对映体的分离和分析。     

联萘酚手性拆分方法及其用于实验室废水的检测

联萘酚是具有手性的药物中间体,其对映体的拆分和检测具有重要意义.建立一种反相液相色谱手性拆分方法,用于联萘酚对映体的拆分.考察了6种不同手性色谱柱的拆分效果,并进一步对流动相配比、柱温和流速等因素进行了优化.结果表明,CHIRALPAK?IA手性柱对联萘酚对映体有较好的拆分性能,在流动相为甲醇-1％ 乙酸(90:10,...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.