无机材料的仿生合成

生物矿化重要的特征之一是细胞分泌的有机基质调制无机矿物的成核和生长, 形成具有特殊组装方式和多级结构特点的生物矿化材料(如骨、牙和贝壳)。仿生合成就是将生物矿化的机理引入无机材料合成, 以有机物的组装体为模板, 去控制无机物的形成,制备具有独特显微结构特点的无机材料, 使材料具有优异的物理和化学性能。仿生合成已成为无机材料化学的研究前沿。本文综述了无机材料仿生合成的发展现状。     

仿生矿化增强材料

近年来,随着材料科学领域的发展,机械性能优异且具有特定功能的有机-无机复合材料成为了研究热点。而天然的生物矿化过程产生了在自然界中分布广泛、结构特征多样性、机械性能优异的天然生物矿物,比如牙齿、骨骼、珍珠、贝壳、海胆刺、海洋红虫颚等。这些天然复合增强材料中的矿化组织结构特点和矿化机理为仿生设计与合成具有特定结构、特定功能和优异机械性能的材料提供了理论依据。通过模拟天然过程的仿生矿化方法,利用有机基质调控无机矿物成核生长为固态矿物,最终能够定向组装具有特定有序结构和先进功能的有机-无机复合材料。本文主要综述了自然界中通过生物矿化过程得到的高强度、高韧性的天然复合增强材料,以及受生物矿化增强现象的启发,在化学与材料仿生矿化合成中出现的一些有机-无机复合的增强材料。     

生物矿物及其矿化过程

生物体内有机基质指导矿物晶体的成核、生长和聚集,使得生物矿物具有特定的形貌、取向和组装方式,从而产生特殊的功能.本文从有机基质与矿物的晶格匹配、立体化学互补和空间定位、静电作用和电荷匹配,以及分子间弱相互作用力等方面综述了生物矿化过程中所涉及的机理,并讨论了生物矿物的分布和特性、生物矿化过程中的有机基质、生物矿化的过程和类型.     

从生物矿化到仿生矿化：构筑新功能生命体

生物矿化是生命体通过调控无机矿物的成核、取向、生长和组装来制造有机-无机复合材料的过程。借鉴生物矿化的原理,可利用有机基质实现无机材料的可控合成,制备出性能优异的新型复合材料。更有趣的是,将材料和生物体从结构和功能两个层面整合,利用材料-生物之间的协同调控,可构筑出新功能生命体,这也是仿生矿化发展的重要方向。本论文首先介绍生物矿化的基本理论和自然界中的生物矿化现象。随后通过对生物矿物结构和功能的阐述,提出仿生构筑新功能生命体的概念,并系统介绍构筑新型材料-生物体的方法,在此基础上系统总结新功能生命体在环保、能源、医学等领域的应用。最后,针对目前该领域存在的局限和问题展开讨论,对实现智能仿生构筑生命体的研究进行展望。我们认为基于仿生矿化构筑新功能生命体的研究能够推动学科边界不断融合,为材料学、化学生物学、生物无机化学以及医学等领域的发展提供新的方向。     

仿生矿化的机理和应用研究进展

碳酸钙、磷酸钙为代表的生物矿物广泛分布于自然界中,经过不同的矿化过程,在生物体内呈现出多样的结构、形貌和功能,构成生物体多种组织和器官.在人工材料合成领域,仿生矿化通过调控碳酸钙、磷酸钙等矿物的成核与生长,获得具有复杂高级结构和特殊生物功能的无机或无机/有机复合材料.本文重点介绍仿生矿化机理和应用的最近研究进展,包括仿...     

二氧化硅的仿生矿化

自然界的进化赋予某些生物体在生理条件下制备复杂结构生物矿物的能力。它们复杂而多尺度有序的结构、特殊的功能以及物种特异的遗传控制特征远非当前的人工合成技术所能实现,因此,师法自然,仿生矿化成为先进材料制备的重要手段之一。研究发现,生物体中的有机基质在生物矿物的形成过程中起着至关重要的作用,例如从含有生物二氧化硅的硅藻、海绵骨针中分离得到的silaffins、长链聚胺,从海绵中提取的silicateins等,这些生物分子通过操纵有机-无机界面作用,从分子水平上控制无机矿物的成核与生长,从而使生物矿物具有特殊的分级结构和组装方式。人们设计或选用具有相似结构或功能的有机分子,模拟生物矿化过程,仿生制备了不同形态、结构和功能的二氧化硅纳米材料。本文以有机-无机界面作用为核心,以认识自然、学习自然、矿物合成及构型调控为主线,从生物二氧化硅的形成机制、仿生矿化的研究进展、应用概况进行了评述,指出了当前研究存在的问题及相应的解决思路,并对仿生矿化的前景进行了展望。     

有机基质在仿生材料合成中的应用

利用有机基质的模板作用通过仿生合成可以制备出性能优异的无机材料。文章综述了两亲有机分子、有机高分子、生物大分子三种有机基质在仿生材料合成中的应用 ,并对仿生材料合成这一新兴研究领域的发展趋势及广阔前景作了进一步的展望。     

P123 / SDS水溶液中碳酸钙结晶及形貌的研究

仿生合成是模拟生物矿化合成人工晶体的一种方法。在生物矿化中的无机矿物往住是在有机基质的参与下形成的,它们在有机基质上成核,并且在整个结晶过程中受到有机基质及其他生命活动的调控,因而在晶体的形态、尺寸、以及取向上都具有高度的统一性和有序性[1],     

生物矿化研究中的化学模型

本文介绍了近年来生物矿化领域的研究情况,特别是从早期的有机-无机界面分子识别模型发展到介观组装和无定形前驱相转化模型的建立。与传统基于水溶液晶体生长的理解不同,人们发现在生物矿化过程中,在溶液中首先沉积的是胶体状的无定型前驱相,有机基质通过对无机相转化动力学及组装过程的控制实现矿物纳米晶体的有序组装,这为材料的仿生制备及生物医学应用提供了全新的策略。     

有机凝胶自组装模板法制备纳米材料

利用溶胶一凝胶聚合过程人工模拟生物矿化进程的技术,已经融人无机材料和超分子有机化学的研究领域.小分子有机凝胶因子在溶剂中发牛自组装,形成多种形态的有机凝胶超分子结构,以其为模板,经过溶胶一凝胶过程,可以诱导转录形成各种形态的纳米材料.本文介绍了利用有机凝胶因子自组装结构为模板制备形态可控无机材料的研究进展及模板结构诱导转录的两种可能机制.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.