“卡房”结构LDHs负载Pt纳米催化剂用于乙醇电催化氧化

乙醇电催化氧化是直接乙醇燃料电池(DEFCs)的核心反应,而DEFCs的阳极电催化剂是提升乙醇转化效率的关键。Pt作为最稳定、最有效的催化剂之一,仍面临着成本高、容易被乙醇氧化产生的中间产物毒化等问题。选择合适的载体实现Pt的高度、均匀、稳定分散,不仅可以提高其抗中毒能力和催化活性,而且还可以减少Pt用量降低成本。本文采用两步电化学沉积法合成了层状双金属氢氧化物(LDHs)纳米阵列负载Pt纳米催化剂(Pt/LDHs/NF),具有“卡房”结构的LDHs增强了Pt纳米粒子的分散,有助于实现高效的乙醇电催化氧化性能。制备的Pt/NiFe-LDH/NF在碱性环境下对乙醇表现出最优的电催化氧化活性,峰值电流密度达到171.99mA·cm^-2。这可为今后设计和制备均匀、稳定分散的Pt基催化剂用于乙醇电催化氧化提供借鉴。     

基于表面占位效应和合理动力学模型的电催化火山关系

电催化在水电解、燃料电池等能源和环境领域起着至关重要的作用.电催化火山关系是预测和理解催化剂活性趋势的通用和标准工具.N?rskov等提出的基于最大反应自由能(ΔG0max)的现代电催化火山关系理论,由于未充分考虑电极电位、中间体及毒物的表面占位以及溶液pH等对电催化动力学的影响,在高活性催化剂的准确预测方面存在局限....     

层状双金属氢氧化物及其复合材料加速电解水制氢的研究进展

随着经济社会的不断发展和能源的不断消耗,开发清洁能源已引起研究者们的广泛关注。层状双金属氢氧化物(LDH)具有典型的层状结构、制备难度低、组成易调节等优点,在电催化分解水方面表现出可与贵金属催化剂相媲美的性能。目前LDH催化剂仍然存在稳定性不足、活性位点辨别不明、电催化反应机理模糊不清等科学问题亟待解决。本文首先介绍了LDH材料的性质和制备方法,重点从元素和化合物对LDH材料结构和性能的调控、取代阳极OER以及海水氧化三个方面综述了LDH材料在电催化制氢方面的研究进展,阐述了LDH复合材料的形貌、界面作用及化合物之间的协同作用。最后对LDH材料更深层次的研究方向作出展望。     

中空MOFs材料制备及电催化应用的研究进展

水分裂、金属-空气电池和燃料电池等能源转换技术对解决未来的能源危机和环境问题至关重要.氧还原反应(ORR)、氧析出反应(OER)和氢析出反应(HER)作为其核心反应,存在反应动力学速率较慢的问题,因此,开发研制高效的非贵金属电催化剂具有重要意义.金属有机骨架(MOFs)材料因具有高度可调的组成和多孔晶体结构,在不同的应用领域引起了越来越多的关注.中空MOFs纳米材料具有MOFs材料高度可调的组成和结构优势,又具有中空结构纳米材料的优点(如更快的物质传输、更丰富的孔隙率、灵活多变的活性组分、更多的暴露活性位点及对苛刻条件的更好相容性等),在电催化领域显现出巨大的应用潜力.本文对近几年来基于中空结构MOFs材料的制备及在电催化方面应用的研究进展进行了综合评述,并对该领域面临的挑战和发展前景进行了总结和展望.     

导电聚合物/贵金属复合材料应用于C1小分子电催化氧化

低温燃料电池作为一种新型的能源装置,具有能量转换效率高、工作温度低、无污染、液体燃料处理简单、启动迅速等诸多优点,已成为世界各国竞相研究的热点。有机小分子的高效电催化氧化直接关系到低温燃料电池的发展和应用。低温燃料电池的电极材料主要是碳/贵金属复合材料,碳载体易导致贵金属粒子团聚、且易发生电氧化腐蚀等缺点降低了贵金属的利用率和电池的使用寿命。导电聚合物具有高的抗腐蚀性、高的表面积、低电阻和高稳定性得到很大关注。本文综述了近年来国内外导电聚合物/金属复合电极材料在燃料电池中的研究进展。     

Pt纳米颗粒在氮掺杂空心碳微球上的高分散负载及其氧还原性能

通过热解自聚合多巴胺法制备了氮掺杂空心碳微球(N-HCMS), 并采用微波辅助乙二醇还原方法把Pt纳米粒子负载于N-HCMS上制得了Pt/N-HCMS催化剂. 催化剂的表面形貌、晶体结构及其比表面积和孔径分布等分别采用扫描电子显微镜、透射电子显微镜、X射线衍射仪及比表面分析仪等进行表征. 采用循环伏安法和线性扫描伏安法研究了Pt/N-HCMS 催化剂在酸性条件下的电催化氧还原性能. Pt/N-HCMS 催化剂由于Pt纳米粒子的均匀分散、N-HCMS载体的快速电子传递及其独特的微孔和中空结构而具有很高的电催化氧还原活性, 其质量比活性是E-TEK Pt/C 催化剂的近两倍. Pt/N-HCMS 催化剂还具有优良的稳定性. 本工作对于开发高性能的燃料电池阴极催化剂具有重要意义.     

单原子催化剂的合成及其能源电催化应用的研究进展

基于电化学反应的能源储存与转化技术为全球能源结构的转型提供了一条绿色、 可持续的途径, 高效的电催化剂在其中扮演着重要的角色. 得益于在物理、 化学性质上的独特优势, 单原子催化剂在电催化能源转化方面展现出巨大的应用前景. 本文综合评述了单原子催化剂的合成及其能源电催化应用的研究进展, 介绍了单原子催化剂的常见表征手段, 总结了单原子催化剂的合成方法(湿化学法、 高温热解法、 原子沉积法、 电化学沉积法等), 并介绍了该类材料在氧还原、 二氧化碳电还原、 电解水及氮气电还原反应中的研究进展, 重点探讨了催化剂微观结构与其性能之间的关系, 最后, 对单原子能源电催化领域所面临的挑战进行了总结, 并对该领域未来的发展方向进行了展望.     

溶剂热助乙二醇还原法制备Pt/C催化剂过程中酸碱配位机制及工艺参数优化

质子交换膜燃料电池(PEMFCs)能量转换率高,反应产物仅为H2O、不造成污染,是一种极具发展前景的能源转换装置.然而, PEMFCs的阴极氧还原反应(ORR)动力学缓慢、过电位高.由于Pt对ORR中间产物脱吸附能适中,因此, Pt/C成为电催化ORR的商业化催化剂,对其制备技术的研究成为该领域的研究热点.乙二醇(EG)还原法制备碳载Pt基催化剂是一种常见方法, EG作为还原剂的同时,还起到保护剂和分散剂的作用,使制备的催化剂具有均一性.EG在外界能量的活化下,分解生成H2O和CH3CHO, CH3CHO作为还原剂将H2Pt Cl6还原生成Pt单质颗粒,同时生成的CH3COO-由于静电排斥可以防止Pt粒子团聚.常见的外界能量的活化方法有脉冲微波法、回流法、溶剂热法等,其中溶剂热法采用高压釜作为反应容器,抗干扰能力强,工艺操作简单、反应快速、耗能较少、成本低廉,极易于实现工业化生产;值得注意的是,无论使用何种方法对Pt前驱体混合液给予活化能使其发生还原,其碱的含量都会对最终所得催化剂的电催化ORR活性有着显著的影响,因此,通过跟踪前驱体混合液中含Pt物种的变化路径,揭示催化剂制备过程中的碱调控机理,实现加入碱的定量化,对于大规模制备高效Pt/C催化剂具有重要的意义.因此,本文采用溶剂热助EG还原法合成Pt/C催化剂的技术,创新联用UV-vis和H+浓度探针技术,揭示了前驱体混合液中含Pt物种的配位过程,实现了加入碱的定量化.发现当m(Na OH):m(Pt)达到2:1时, Pt配位完成;进而通过优化反应温度、反应时间等参数,成功制备了高效Pt/C催化剂:当反应温度为140 oC,反应时间为2 h时,所得催化剂在酸性条件下,相对于商业化Pt/C具有更高的电催化ORR活性,其起始ORR还原电位达到0.95 V(商业化Pt/C为0.90 V),半波电位为0.82 V(商业化Pt/C为0.75 V),该工作对于工业化大批量生产高效Pt/C催化剂具有重要的意义.     

低维纳米材料在质子交换膜燃料电池电催化反应中的应用

在聚合物膜燃料电池中,电催化剂决定了电池的运行寿命及性能。本文按照材料维数的不同,分别介绍了近年来零维、一维和二维材料在聚合物膜燃料电池电极反应中应用的最新研究进展;并对各类聚合物膜燃料电池电催化反应的机理和研究侧重点进行了详细的介绍。     

一步法绿色合成甲醇燃料电池阳极催化剂

以含有多羟基的聚乙二醇为还原剂,采用水热还原技术一步法制备出Pt/石墨烯复合物电极材料。采用扫描电子显微镜(SEM)技术对石墨烯和Pt/石墨烯材料进行了形貌和结构表征。利用循环伏安电化学测试技术研究了该Pt/石墨烯电极对甲醇燃料小分子的电催化氧化性能。研究结果表明该复合材料作为阳极催化剂对甲醇表现出优异的电催化活性。该电极材料有望用作甲醇燃料电池的阳极催化剂材料。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.