新型力学性能增强二氧化硅气凝胶块体隔热材料

作为一种轻质和超高孔隙率的三维纳米多孔材料,二氧化硅气凝胶具有极低的常温导热系数,成为理想的纳米多孔超级隔热材料。然而,二氧化硅气凝胶的力学性能很差,且常压干燥制备的气凝胶整体性较差,这些都极大地限制了二氧化硅气凝胶的实际应用。近年来,通过复合或交联的方法制备得到的新型二氧化硅气凝胶,在一定程度上提高了其整体性、强度和柔韧性,使得二氧化硅气凝胶作为单独的块体材料应用成为可能。本文简要介绍二氧化硅气凝胶的多孔结构、基本性质和隔热原理,并对纤维增强、聚合物交联和其他复合二氧化硅气凝胶作为块体隔热材料的研究现状进行重点综述。最后,总结了该领域存在的关键问题,并提出未来的研究方向。     

常压干燥法制备气凝胶的研究进展

气凝胶是一类轻质、低密度的三维纳米多孔固态材料,因其独特的高孔隙率、高比表面积和低导热系数等特性,使其在吸附、催化、保温隔热和隔音等诸多领域具有广泛的用途,目前其相关研究在材料科学领域受到了广泛的关注。气凝胶的制备主要包括溶胶-凝胶过程和湿凝胶干燥两个步骤,湿凝胶的干燥是制备气凝胶过程中至关重要而又较为困难的一步。传统的气凝胶通过超临界干燥制备,工艺复杂、成本高,而且由于干燥过程在高温高压条件下进行,有一定的危险性并且不适宜大规模生产,因此如何通过常压干燥获得高比表面积、高孔隙率、低密度的性能优异的气凝胶是其研究的重要方向之一。本文简要介绍了湿凝胶的制备以及凝胶干燥理论,详细介绍了近年来常压干燥方法气凝胶制备的研究进展,并对其未来发展前景做出了展望。     

块状石英纤维/Al_2O_3气凝胶复合材料的非超临界干燥法制备及表征

采用溶胶-凝胶法和常压干燥法以N,N′-二甲基甲酰胺(DMF)作为干燥控制化学添加剂制备了低密度石英纤维增强Al2O3气凝胶复合材料.通过氮气吸附-脱附实验比较研究了石英纤维对氧化铝气凝胶孔结构参数的影响;采用X射线衍射技术表征了在升温过程中石英纤维/Al2O3气凝胶复合材料的相结构变化;利用扫描电子显微镜和透射电子显微镜观察了Al2O3气凝胶基体及其石英纤维复合材料的微观形貌;初步探讨了DMF对Al2O3气凝胶形貌和密度的影响.研究结果表明石英纤维/Al2O3气凝胶复合材料成块性好,纤维与气凝胶基体结合紧密,石英纤维提高了Al2O3相转变温度,适量的DMF有利于形成均匀凝胶网络结构,减小干燥收缩压力.     

勃姆石纤维增强二氧化硅气凝胶的制备及性能

以六水合氯化铝为铝源, 通过水热法制备勃姆石纤维; 以甲基三甲氧基硅烷和正硅酸乙酯为硅源共前驱体, 采用溶胶-凝胶法进而常压干燥制备了勃姆石纤维掺杂的二氧化硅复合气凝胶; 探究了勃姆石纤维的掺杂量对复合气凝胶性能的影响. 当勃姆石纤维的掺杂量(质量分数)为1%时, 气凝胶的机械性能最好, 能够承受17.1%的压缩应变, 最大压缩强度为1.12 MPa, 压缩模量高达2.57 MPa, 复合气凝胶在150 ℃仍然具有较低的导热系数(0.0670 W·m^?1·K^?1). 勃姆石纤维能够一定程度地抑制二氧化硅颗粒在高温下的烧结和相转变, 对二氧化硅气凝胶的耐高温性能有显著的提升作用, 复合气凝胶在1100 ℃高温热处理后, 仍能保持良好的隔热性能和较高的机械强度.     

常压干燥制备酚醛树脂基炭气凝胶研究进展

以间苯二酚-甲醛为代表的酚醛树脂基炭气凝胶是一种轻质、多孔、非晶态的纳米炭材料,在催化、吸附、电化学和隔热等领域中有广阔的应用前景.但是复杂且高成本的超临界干燥工艺极大地限制了炭气凝胶的工业化制备及其应用,因此常压干燥工艺成为目前研究最为广泛的炭气凝胶制备技术之一.本文综述了酚醛树脂基炭气凝胶常压干燥制备过程的四种结构...     

常压干燥条件下乙醇对SiO2气凝胶密度的影响

SiO2气凝胶是一种经典的三维网状多孔纳米材料,具有低密度、高孔隙率、高比表面积、低热导率、低光学折射率和低声速等特点,在许多领域都具有巨大的应用潜力.以四乙氧基硅烷(TEOS)为硅源,采用常压干燥的方法,通过改变乙醇、氨水的物质的量之比实现对二氧化硅气凝胶的密度的研究.当TEOS、乙醇、水(0.01 mol/L草酸催...     

纳米银负载的炭气凝胶制备及抗菌性能研究

以常压干燥法制备的酚醛有机气凝胶为原料,通过在硝酸银溶液中浸渍使银吸附或沉积在有机气凝胶上,在常压条件下干燥并炭化制得纳米银负载的炭气凝胶。利用扫描电镜(SEM)、透射电镜(TEM)、X-射线衍射(XRD),比表面积及孔径分析等方法研究了浸渍前后凝胶密度和结构的变化,以及制备条件对银负载炭气凝胶的载银量和凝胶结构的影响;研究了载银炭气凝胶对大肠埃氏杆菌(ATCC25922)和金黄色葡萄球菌(ATCC25923)的抗菌效果。结果表明,这类银负载炭气凝胶对大肠杆菌和金黄色葡萄球菌均有很强的杀灭能力,预期炭气凝胶在作为催化剂或吸附杀菌材料方面有良好的应用前景。     

超低密度气凝胶的制备及应用

超低密度气凝胶是一类具有超轻质特性的多孔固体材料,较常规气凝胶具有更高的孔隙率与更为多样化的表面特性,其独特的物理与化学性质使其作为新型纳米多孔材料在诸多新兴领域得到了重要应用。在制备过程中保留超低密度气凝胶高度发达的三维孔隙结构,以及在实际应用中发挥超低密度气凝胶独特的功能特性是气凝胶领域近年来的研究重点之一。本文按照超低密度气凝胶的主要类型综述了该材料制备技术的最新研究进展,探讨了其在空间探测、阻燃隔热、储能、吸附、催化以及传感领域的应用方式;通过分析目前研究中存在的主要问题,对未来的发展方向,如突破常压干燥制备技术、开展各类复合气凝胶或结构有序可控的超低密度气凝胶的制备、系统性地研究超轻质特性对气凝胶特定功能的影响规律等进行了展望。     

添加环氧丙烷法常压干燥制备ZrO2气凝胶

以无机锆盐硝酸氧锆(ZrO(NO3)2·5H2O)为前驱体,1,2-环氧丙烷(PO)为凝胶促进剂,甲酰胺(FA)为干燥控制化学添加剂(DCCA),采用溶胶-凝胶法并通过常压干燥制备了轻质二氧化锆(ZrO2)气凝胶,利用差热分析(DTA)、扫描电镜(SEM)、N2吸附/脱附等测试技术对所制得的ZrO2气凝胶进行了表征.结果表明:添加环氧丙烷常压干燥制得的ZrO2气凝胶具有纳米尺寸的多孔网络结构,表观密度可低至202.08 kg·m-3,比表面积可高达645.0 m2·g-1,与超临界干燥效果相当.环氧丙烷因其环氧原子的强亲核性和不可逆的开环反应,可促进凝胶化,并通过环氧丙烷的量控制反应过程和凝胶状态.     

原位法常压干燥制备疏水SiO2气凝胶及其热稳定性

在正硅酸乙酯(TEOS)酸碱两步催化的溶胶-凝胶过程中, 加入干燥控制化学添加剂(DCCA)N,N-二甲基甲酰胺(DMF)和三甲基氯硅烷(TMCS)的混合溶液, 进行原位疏水改性处理, 并结合常压干燥工艺制备了高比表面积的疏水SiO2气凝胶. 利用N2物理吸附, 全自动X射线衍射仪(XRD), 傅立叶变换红外光谱仪(FTIR), 扫描电子显微镜(SEM)等对样品的形貌结构进行了表征. 实验结果表明, 原位疏水改性比非原位疏水改性制备的SiO2气凝胶具有更大的比表面积, 可达979 m2·g-1, 气凝胶表面存在憎水性基团—CH3, 有良好的疏水性. 500 ℃热处理后, 气凝胶因失去大量的—CH3基团, 由憎水性转为亲水性; 800 ℃高温热处理后, 疏水SiO2气凝胶仍处于非晶态, 具有良好的热稳定性能.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.