The Finite Element Analysis of Interaction Problem Through Water,Soil, Balloon and Pile

This paper presents the finite element analysis of an interaction problem involving water, soil, balloon and pile. A building with friction piles is considered, and balloons are introduced to the top of piles. To control the vertical displacement of the building, water is injected into or removed from the balloons. The two-dimensional incompressible Navier-Stokes equation is introduced, and the ALE (Arbitrary Lagrangian Eulerian) method is applied to the water flow analysis. The FS (Fractional Step) method is also applied in the finite element formulation. The soil, which is assumed as a linear elastic body, is subjected to the deformation analysis. The balloon and pile are assumed as a linear elastic truss and a rigid frame, and the deformation analysis is also performed. All the components are discretized by the finite element method in space and are interactively solved by taking into account continuity conditions of traction and displacement.     

水中冲击波与弹性薄板耦合作用的研究

对水中冲击波与弹性薄板的流固耦合作用进行了研究,建立了实验装置。利用全息干涉法定量测量了水中动态流场,并测出受水中冲击波作用的弹性薄板在不同时刻的变形,得出相应的全息干涉条纹图。同时利用有限元法对水中冲击波与弹性薄板的流固耦合问题进行了数值计算。研究结果表明,用实验方法能够较好地模拟水中冲击波与弹性结构的耦合作用,用有限元法计算水中冲击波传播问题是可行的。     

二维弹性结构入水冲击过程中的流固耦合效应

描述了一个研究弹性结构入水冲击过程中水弹性效应的数值方法,在弹性结构入水冲击过程中,流体域作用在结构上的水动力载荷由边界元法获得,而结构的弹性动力响应则由有限元方法求解,通过线性给离散Ｂｅｒｎｏｕｌｌｉ方程将有限元方程和边界元方程耦合到一起,从而获得了求解流场和结构动力响应的相互耦合的运动方程。在数值考虑了自由表面的非线性边界条件,通过引入射流单元以及最大射流厚度,较好地处理了冲击引起的射流问题。     

纤维增强复合材料弹性性能预测的域分解方法及应用

提出了新的有限元建模方法,即域分解方法,用于预测纤维增强复合材料单向带T300/BSL914C(环氧树脂)和AS4/3501-6(环氧树脂)的弹性性能。域分解方法基于区域叠合技术,分别建立单胞的整体域与纤维域模型用于代替传统有限元建模方法中单胞的基体域与纤维域模型。整体域是真实基体体积与纤维体积的叠加,两区域网格独立划分,互不影响。采用MSC.Nastran中的多节点约束Explicit单元,在整体域与纤维域节点之间建立位移连接属性模拟单胞基体域与纤维域之间的位移约束关系,从而实现两区域的耦合计算。计算结果表明:域分解方法单胞模型纤维增强方向弹性模量Ez预测值与试验值误差在7%以内,其余弹性常数也都与试验值吻合较好。域分解方法不仅可以大大简化纤维增强复合材料的细观力学建模,而且可以准确地预测纤维增强复合材料的弹性性能。     

Parallel finite element simulation of mooring forces on floating objects

The coupling between the equations governing the free‐surface flows, the six degrees of freedom non‐linear rigid body dynamics, the linear elasticity equations for mesh‐moving and the cables has resulted in a fluid‐structure interaction technology capable of simulating mooring forces on floating objects. The finite element solution strategy is based on a combination approach derived from fixed‐mesh and moving‐mesh techniques. Here, the free‐surface flow simulations are based on the Navier–Stokes equations written for two incompressible fluids where the impact of one fluid on the other one is extremely small. An interface function with two distinct values is used to locate the position of the free‐surface. The stabilized finite element formulations are written and integrated in an arbitrary Lagrangian–Eulerian domain. This allows us to handle the motion of the time dependent geometries. Forces and momentums exerted on the floating object by both water and hawsers are calculated and used to update the position of the floating object in time. In the mesh moving scheme, we assume that the computational domain is made of elastic materials. The linear elasticity equations are solved to obtain the displacements for each computational node. The non‐linear rigid body dynamics equations are coupled with the governing equations of fluid flow and are solved simultaneously to update the position of the floating object. The numerical examples includes a 3D simulation of water waves impacting on a moored floating box and a model boat and simulation of floating object under water constrained with a cable. Copyright © 2003 John Wiley & Sons, Ltd.     

考虑刚体运动与弹性运动耦合影响的旋转叶片振动有限元分析

本文研究了旋转叶片的纵向振动和双向横振动,考虑了刚体运动和弹性振动的耦合关系,利用有限元法推导出离散系统动力学方程,从而引出陀螺特征值问题。本文就某一特例了计算了在不同转速时叶片振动的自然频率,讨论了转速对振动频率的影响。     

流固耦合地震波动问题的显式谱元模拟方法

流固耦合地震波动问题主要研究由流体和固体构成的复杂系统中地震波传播特性及其规律. 传统模拟方法中一般以声波方程、弹性波方程的数值解分别描述理想流体和弹性固体中的波动, 并实时地处理两种不同性质介质之间的相互耦合作用, 数值格式复杂且限制数值模拟精度与计算效率. 本文采用谱元法结合多次透射公式人工边界条件实现了一种流固耦合地震波动问题的高阶显式数值计算方法. 该方法利用了流固耦合问题统一计算框架,可将饱和多孔介质的Biot波动方程分别退化为理想流体的声波方程和弹性固体的弹性波方程. 通过P波垂直入射的水平成层理想流体-饱和多孔介质-弹性固体场地模型、P波斜入射的不规则层状界面以及任意形状界面的理想流体-饱和多孔介质-弹性固体场地模型等三个算例, 与传递函数法解析解以及集中质量有限元法计算结果进行对比分析, 证明了本文方法的正确性与有效性. 数值模拟结果表明, 本文方法相较传统有限元法可以少得多的节点数量获得更高的数值精度, 并且在较宽的频率范围内都能可靠地模拟出流固耦合系统的动力响应, 充分体现出本文方法兼顾高精度、计算效率和复杂场地建模灵活的特点.      

爆炸波作用下地下防护结构与围岩的非线性动力相互作用分析

针对实际地下工程中普遍存在的材料非线性以及半无限介质域的处理问题,给出了基于时间有关基本解的时域边界元法与非线性动力有限元法的耦合方法,应用该耦合方法计算了一马蹄形截面地下防护结构与围岩受爆炸冲击波作用下非线性相互作用的时间历程,并与线弹性情况进行了比较分析。结果表明:本文的方法具有较高精度,真实地再现了波在弹性层中传播以及反射的全过程。     

ANALYSIS ON ACOUSTICAL SCATTERING BY A CRACKED ELASTIC STRUCTURE

The acoustical scattering by a cracked elastic structure is studied. The mixed method of boundary element and fractal finite element is adopted to solve the cracked structure-acoustic coupling problem. The fractal two-level finite element method is employed for the cracked structure, which can reduce the degree of freedoms (DOFs) greatly, and the boundary element method is used for the exterior acoustic field which can automatically satisfy Sommerfeld‘s radiation condition. Numerical examples show that the resonance frequency is lower with the crack‘s depth increase, and that the effect on the acoustical field by the crack is particularly pronounced in the vicinity of the crack tip. This mixed method of boundary element and finite element is effective in solving the scattering problem by a cracked structure.     

Transient analysis of dam–reservoir interaction including the reservoir bottom effects

In this paper, time-domain transient analysis of elastic dam–reservoir interaction including the reservoir bottom effects is presented by coupling the finite element method in the infinite fluid domain and in the solid domain. An efficient coupling procedure is formulated by a substructuring method. Sommerfeld's boundary condition for the far end of the infinite domain is implemented. To verify the proposed scheme, numerical examples are given to compare with available exact solutions for rigid and elastic dam cases. Finally, a numerical example is studied to evaluate the effects of the reservoir bottom.     

BEM for simulation of a 2D elastic body with randomly distributed circular inclusions

Based on our 2D BEM software THBEM2 which can be applied to the simulation of an elastic body with randomly distributed identical circular holes, a scheme of BEM for the simulation of elastic bodies with randomly distributed circular inclusions is proposed. The numerical examples given show that the boundary element method is more accurate and more effective than the finite element method for such a problem. The scheme presented can also be successfully used to estimate the effective elastic properties of composite materials. Project supported by the National Natural Science Foundation of China (No. 19772025).     

A variational solution of 2-D sound-structure interaction problems

Based on the fluid-structure coupling theory, a localized variational principle for analyzing the sound radiation from elastic structure submerged in water due to harmonic excitations is presented. It will be a powerful tool to formulate various numerical methods for steady response of structural-acoustic systems. By means of this variational principle a hybrid element method, in which an analytical solution valid in most of the surrounding water is incorporated with finite elements distributed in the structure and its neighboring water, is devised. Computational examples are then given to demonstrate its high accuracy and time saving. The project supported by the National Natural Science Foundation of China (10172038) and the Doctoral Program Foundation of Institution of Higher Education of China (20040487013). The English text was polished by Yunming Chen.     

含裂纹弹性结构对声散射作用研究

研究了含裂纹的弹性结构对声的散射作用,应用分配形有限元和边界元相结合的方法于含裂纹的结构声相互作用问题,利用二级分形有限元方法对含裂纹结构进行离散,这将使得自由度大为减少;使用边界元方法计算外域散射声场,这将自动满足无限远辐射边界条件,数值结果初步表明：(1)随着裂纹深度的增加,结构声耦合系统的共振频率将下降;(2)裂纹附近的声场所受的影响更为明显。     

Coupling of assumed stress finite element and boundary element methods with stress-traction equilibrium

In this study, the stress based finite element method is coupled with the boundary element method in two different ways. In the first one, the ordinary distribution matrix is used for coupling. In the second one, the stress traction equilibrium is used at the interface line of both regions as a new coupling process. This new coupling procedure is presented without a distribution matrix. Several case studies are solved for the validation of the developed coupling procedure. The results of case studies are compared with the distribution matrix coupling, displacement based finite element method, assumed stress finite element method, boundary element method, ANSYS and analytical results whenever possible. It is shown that the coupling of the stress traction equilibrium with assumed stress finite elements gives as accurate results as those by the distribution matrix coupling.     

边坡稳定分析的虚功率法

基于有限元计算所得应力场的改进极限平衡法, 对渗流与有效应力耦合作用强烈的边坡或地基的稳定性分析具有优势. 本文提出了边坡稳定分析的虚功率法, 即基于极限分析的上限定理, 利用机动许可的组合刚体滑动机构和有限元应力场, 用滑动机构的速度间断面上的抗滑力功率与滑动力功率的比值计算安全系数. 通过分步优化方法, 获得边坡给定滑动机制的稳定安全系数. 对2个典型折线滑动机构的边坡案例进行了分析, 比较了采用静力平衡应力场和静力许可应力场对安全系数的影响. 指出基于土体线弹性本构模型所得的有效应力场计算的稳定安全系数, 也是边坡稳定安全性的一个不错的度量. 算例中本文计算所得的边坡稳定安全系数, 与文献中推荐的答案很接近, 其滑动机制与有限元强度折减法分析所得的滑动机制基本一致, 安全系数也接近, 表明本文提出的方法是合理的边坡稳定分析新方法, 为边坡和地基的稳定性分析提供了新的选择.      

冻土水热力耦合作用的数学模型及数值模拟

将冻土体视为空间弹性体,提出了土体在冻结过程中水分场、温度场、应力场三场耦合的一般数学模型,并给出了相应的离散方程及其解法,最后给出了数值算例,并与实测值比较,证明了该模型和算法的正确性。     

基于S-ALE方法的圆柱体垂直出水破冰研究

以往针对结构物垂直贯穿冰层破裂的研究多不考虑水的作用, 与实际应用场景不符. 本文应用 LS-DYNA 有限元软件建立了基于结构化-任意拉格朗日欧拉(S-ALE)流固耦合方法及罚函数接触算法的冰?水?结构物耦合作用数值模拟方法. 采用欧拉算法描述空气域和水域, 采用拉格朗日算法描述圆柱体结构和冰层结构, 使用弹塑性应变率模型表征冰材料力学性质. 自主搭建了圆柱体垂直贯穿冰层试验台架, 验证了有限元方法计算结构物?冰层相互作用问题的可行性. 通过模拟圆柱体垂直出水破冰过程, 并与无水环境下圆柱体垂直贯穿冰层破裂过程进行对比. 结果表明: 有水环境下结构物?冰层间作用存在“水垫效应”; 冰层突破载荷极值大小与有、无水环境无显著变化; 有水环境下的结构物突破冰层冰载荷持续时间明显长于无水环境下持续时间; 有水环境冰层弹性变形阶段更长, 且有水环境冰层挠度变化大于无水环境下的挠度变化. 本文研究成果为极地冰区环境下结构物垂直出水破冰的结构强度计算及优化设计提供了研究基础.      

控制棒驱动机构步跃提升碰撞的动力学建模

控制棒驱动机构(CRDM)在步跃提升时,钩爪部件会与承压壳体上的提升磁极发生面面碰撞。本文基于混合坐标法建立控制棒驱动机构有限元离散的刚-柔耦合动力学方程,用罚函数法计算了钩爪部件与承压壳体之间的碰撞力和应力分布情况。结果表明,刚柔耦合多体方法在仿真小变形碰撞时可以提高计算效率,同时又能达到与有限元方法同等的精度。进一步对碰撞模型不同区域的网格疏密和尺寸大小做了定量分析,得到了降低有限元网格数量的方法,可为工程中碰撞模型的网格划分提供参考。     

机器人柔性手臂的动力学有限元分析

本文将弹性动力学虚功原理推广到机器人柔性动力学,建立了计及关节弹性和关节阻尼的柔性手臂有限元动力学模型,模型中包括了非线性刚体运动和弹性变形间的耦合。文中还导出了手臂参考坐标系间的运动学递推关系。本文方法推演简单、计算效率高,能够用于具有任意复杂部件的柔性机器人动力学分析。     

人颅骨结构的动力参数

为了深入探讨人头部受撞击时颅脑损伤的力学计算模型,本文对颅骨结构的功力参数连行了测试和有限元分析。结果表明,人颅骨结构属于小阻尼结构,进行动力分析时可以抽象成弹性阻尼薄壳结构。