MOCVD法生长Ga、P掺杂的ZnO薄膜

采用金属有机化学气相沉积法在蓝宝石衬底上制备Ga、P掺杂的ZnO薄膜,分别采用X射线衍射、扫描电子显微镜、霍尔效应测试、光致发光谱对样品进行表征。通过Ga、P掺杂分别得到n、p型ZnO薄膜,n型ZnO薄膜的载流子浓度可以达到1×1019cm-3,p型ZnO薄膜的载流子浓度达到1.66×1016cm-3。所制备的ZnO薄膜具有c轴择优生长取向,并且p型ZnO薄膜具有较好的光致发光特性。     

A study on morphology control and optical properties of ZnO nanorods synthesized by microwave heating

In this study, we present morphology control investigations on zinc oxide (ZnO) nanorods synthesized by microwave heating of a mixture of zinc nitrate hexahydrate and hexamethylenetetramine (HMTA) precursors in deionized water (DI water). To study the morphology and structural variations of the obtained ZnO nanorods in different molar ratio of zinc nitrate hexahydrate to HMTA, X-ray diffraction (XRD), scanning electron microscopy (SEM) images, Raman scattering, and photoluminescence (PL) spectroscopy were measured. XRD and SEM images are utilized to examine the crystalline quality as well as the morphological properties of the ZnO nanorods. It is found that morphology control can be achieved by simply adjusting the reactant concentrations and the molar ratio of zinc nitrate hexahydrate to HMTA. Raman scattering and PL spectroscopy measurements were demonstrated to study the size- and shape-dependent optical response of the ZnO nanorods. The Raman scattering result shows that the intensity of LO mode at around 576 cm^?1 decreases with the increase in the molar ratio of zinc nitrate hexahydrate to HMTA, indicating the reduction of defect concentrations in the synthesized ZnO nanorods. Room temperature PL spectrum of the synthesized ZnO nanorods reveals an ultraviolet (UV) emission peak and a broad visible emission. An enhancement of UV emission appears in the PL spectra as the molar ratio of zinc nitrate hexahydrate to HMTA increases, indicating that the defect concentration of the synthesized ZnO nanorods can be reduced by increasing the molar ratio.     

Nanostructure and optical properties of M doped ZnO (M=Ni, Mn) thin films prepared by sol-gel process

The transparent thin films of undoped, Mn-doped, and Ni-doped zinc oxide (ZnO) have been deposited on glass substrates via sol-gel technique using zinc acetate dehydrate, nickel chloride, and manganese chloride as precursors. The structural properties and morphologies of the deposited undoped and doped ZnO thin films have been investigated. X-ray diffraction (XRD) spectra, scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS) were used to examine the morphology and microstructure of the thin films. Optical properties of the thin films were determined by photoluminescence (PL) and UV/vis spectroscopy. The analyzed results indicate that the obtained films are of good crystal quality and have smooth surfaces, which have a pure hexagonal wurtzite ZnO structure without any Mn or Ni related phases. The band gap energy was estimated by Tauc's method and found to be 3.28, 3.26, and 3.34 eV for ZnO, Ni-doped ZnO, and Mn-doped ZnO thin films at room temperature, respectively. Room temperature photoluminescence is observed for the ZnO, Ni-doped ZnO, and Mn-doped ZnO thin films.     

六角锥状ZnO纳米结构的生长机理、结构及光学性能(英文)

利用醋酸锌[Zn(CH3COO)2·2H2O]和六次甲基四胺(C6H12N4)以一定比例配置成反应溶液,通过水热合成法制备了六角锥状ZnO纳米结构。同时,使用了扫描电子显微镜(SEM)、X射线衍射和选区电子衍射(SAED),对样品的形貌与结构进行了分析。结果表明,样品形貌成六角锥状结构,并且在[002]方向择优生长。通过对样品的光学性能测试,由PL光谱分析可知,样品在379nm处有一个较强的紫外发光峰,并且在可见光区域产生了一些较弱的可见光发射峰,表明制备的六角锥状ZnO纳米结构的晶体质量不是很好。除此之外,对六角锥状ZnO的生长机理也进行了讨论。     

Porous ZnO nanobelts evolved from layered basic zinc acetate nanobelts

Novel porous ZnO nanobelts were successfully synthesized by heating layered basic zinc acetate (LBZA) nanobelts in the air. The precursor of LBZA nanobelts consisted of a lamellar structure with two interlayer distances of 1.325 and 0.99 nm were prepared using a low-temperature, solution-based method. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and infrared spectroscopy are used to characterize the as-products. PL measurements show that the porous ZnO nanobelts have strong ultraviolet emission properties at 380 nm, while no defect-related visible emission is detected. The good performance for photoluminescence emission makes the porous ZnO nanobelts promising candidates for photonic and electronic device applications.     

Optical properties of ZnO and ZnO:Ce layers grown by spray pyrolysis

In this paper, zinc oxide (ZnO) and cerium-doped zinc oxide (ZnO:Ce) films were deposited by reactive chemical pulverization spray pyrolysis technique using zinc and cerium chlorides as precursors. The effects of Ce concentration on the structural and optical properties of ZnO thin films were investigated in detail. These films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) measurements. All deposited ZnO layers at the temperature 450 °C are polycrystalline and indicate highly c-axis oriented structure. The dimension of crystallites depends on incorporation of Ce atoms into the ZnO films. The photoluminescence spectra of the films have been studied as a function of the deposition parameters such as doping concentrations and post grows annealing. Photoluminescence spectra were measured at the temperature range from 13 K to 320 K.     

Synthesis and optical properties of Co-doped ZnO nanofibers prepared by electrospinning

In this work, Co-doped ZnO nanofibers have been fabricated successfully by an electrospinning technique. The as-prepared nanofibers are characterized by themogravimetric analysis (TG), scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), Raman spectra and photoluminescence spectroscopy (PL). Results have showed that a wurtzite ZnO nanofibers were obtained and the PL spectrum showed a red-shift by 10 nm due to narrowing of the ZnO band gap (∼3.29 eV) as a result of Co doping. Meanwhile, Raman scattering spectra exhibited an unusual peak at 540 cm⁻¹.     

Effect of temperature on pulsed laser deposition of ZnO films

ZnO thin films have been deposited on Si(1 1 1) substrates at different substrate temperature by pulsed laser deposition (PLD) of ZnO target in oxygen atmosphere. An Nd:YAG pulsed laser with a wavelength of 1064 nm was used as laser source. The influences of the deposition temperature on the thickness, crystallinity, surface morphology and optical properties of ZnO films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), selected area electron diffraction (SAED), photoluminescence (PL) spectrum and infrared spectrum. The results show that in our experimental conditions, the ZnO thin films deposited at 400 °C have the best surface morphology and crystalline quality. And the PL spectrum with the strongest ultraviolet (UV) peak and blue peak is observed in this condition.     

紫外激发下锰掺杂纳米氧化锌

应用气相传输法, 以铜为催化剂, 在硅衬底上制备了锰掺杂氧化锌纳米四足晶须. 利用x射线与电子衍射谱、扫瞄电镜和高分辨率透射电镜, 对样品形貌、结构和成份进行表征与检测; 通过355nm与375nm紫外光激发下掺杂与未掺杂样品光致发光谱的对比, 结合拉曼散射谱与光致激发谱对掺杂样品中反常光致发光机理进行分析. 结果表明, 样品沿［0001］方向生长的前端和内部长有纤细刺状结构的中空六方管组成; 样品中掺入Mn2+的无辐射复合中心作用, 是掺杂样品紫外辐射强度和谱宽变小的主要原因, 氧化锌晶体中晶格周期对Mn2+中d-d电子跃迁过程的影响, 是375nm紫外光激发下掺杂样品中415nm辐射峰产生的主要原因.     

Synthesis, characterization and optical properties of multipod ZnO whiskers

Multipod ZnO whiskers were synthesized successfully by two steps: pulsed laser deposition (PLD) and thermal evaporation process. First, a thin layer of Zn films were deposited on Si(1 1 1) substrates by PLD. Then the whiskers grew on Zn-coated Si(1 1 1) substrate by the simple thermal evaporation oxidation of the metallic zinc powder at 900 °C in the air without any catalysts or additives. The pre-deposited Zn films by PLD on the substrate can promote the growth of ZnO multipod whiskers effectively. The as-synthesized ZnO whiskers were characterized by using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). The results revealed that the whiskers are highly crystalline with the wurtzite hexagonal structure. Room temperature photoluminescence (PL) spectrum of the whiskers shows a UV emission peak at ∼393 nm and a broad green emission peak at ∼517 nm, which was assigned to the near band-edge emission and the deep-level emission, respectively.     

Synthesis and red-shifted photoluminescence of single-crystalline ZnO nanowires

Local-oriented single-crystalline ZnO nanowires have been synthesized in large scale by a simple microemulsion method in the presence of sulfonate-polystyrene (S-PS) and dodecyl benzene sulfonic acid sodium salt (DBS). The as-prepared product is characterized by using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), infrared (IR) spectra and photoluminescence (PL) spectrum. The nanowires exhibit a local congregation and preferentially grow along the [0 0 2] facet. FT-IR spectrum indicates that S-PS is adsorbed on the surface of ZnO nanowires. The PL spectrum shows evidently red-shifted ultraviolet (UV) emission.     

Nanostructure materials for destruction of warfare agents and eco-toxins prepared by homogeneous hydrolysis with thioacetamide: Part 1—zinc oxide

Zinc sulphide (ZnS) nanoparticles were prepared by homogeneous hydrolysis of zinc sulphate and thioacetamide (TAA) at 80 °C. After annealing at temperature above 400 °C in oxygen atmosphere, zinc oxide (ZnO) nanoparticles were obtained. The ZnS and ZnO nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission microscopy (HRTEM), selected area electron diffraction (SAED), by BET and BJH methods used for surface area and porosity determination. The photocatalytic activity of the as-prepared ZnO samples was determined by the decomposition of Orange II in the aqueous solution under UV irradiation of 365 nm of wavelength.     

简单溶液法制备氧化锌纳米棒及光学性质

以水合醋酸锌(ZnAc₂·2H₂O)和水合肼(N₂H₄·H₂O)为反应物,在未使用任何表面活性剂的简单反应体系中制得了ZnO纳米棒。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电镜(HRTEM)和室温荧光光谱对产物的晶体结构、形貌和发光性质进行了表征和分析。测试结果表明,所得产物为六方纤锌矿结构ZnO纳米棒,平均直径为120 nm,产物结晶完整,尺寸均匀。这种简单溶液法制备的ZnO纳米棒在386 nm处具有一个尖锐的紫外发光峰,发射光谱的半峰全宽仅为18 nm,在可见光区有一个较弱的宽频发光带。在该反应体系中通过调控混合溶剂的配比,不使用任何表面活性剂的条件下,为ZnO一维纳米棒的形核和生长提供了微型反应空间。     

Effects of growth duration on the structural and optical properties of ZnO nanorods grown on seed-layer ZnO/polyethylene terephthalate substrates

Well-aligned single crystalline zinc oxide (ZnO) nanorods were successfully grown, by hydrothermal synthesis at a low temperature, on flexible polyethylene terephthalate (PET) substrates with a seed layer. Photoluminescence (PL), field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) measurements were used to analyze the optical and structural properties of ZnO nanorods grown for various durations from 0.5 h to 10 h. Regular and well-aligned ZnO nanorods with diameters ranging from 62 nm to 127 nm and lengths from 0.3 μm to 1.65 μm were formed after almost 5 h of growth. The growth rate of ZnO grown on PET substrates is lower than that grown on Si (1 0 0) substrates. Enlarged TEM images show that the tips of the ZnO nanorods grown for 6 h have a round shape, whereas the tips grown for 10 h are sharpened. The crystal properties of ZnO nanorods can be tuned by using the growth duration as a growth condition. The XRD and PL results indicate that the structural and optical properties of the ZnO nanorods are most improved after 5 h and 6 h of growth, respectively.     

Coating zinc oxide submicron crystals on poly(methyl methacrylate) chips and spheres via ultrasound irradiation

Ultrasound irradiation is used for anchoring zinc oxide submicron crystals with a main diameter and length of 280 nm and 470 nm, respectively, onto the surface of poly(methyl methacrylate) PMMA chips (2 mm diameter), and zinc oxide crystals with a mean diameter and length of 150 nm and 230 nm, respectively, onto the surface of the PMMA spheres (1–10 μm). The zinc oxide crystals were obtained by sonochemical irradiation of a mixture containing the PMMA, zinc (II) acetate dihydrate, ethanol, water, and 24 wt.% aqueous ammonia for 2 h, yielding a PMMA–zinc oxide composite. By controlling the atmosphere and reaction conditions, we could achieve well-adhered zinc oxide crystals on the surface of poly(methyl methacrylate). The resulting zinc oxide–PMMA composite was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray analysis (EDX), high-resolution scanning electron microscopy (HRSEM), and photoluminescence (PL) spectroscopy. The zinc oxide-deposited PMMA chips (loaded with 0.03–1.0 wt.% ZnO) were successfully homogenized in melt by extrusion and then injection molded into small, disc-shaped samples. These samples were analyzed with respect to their directional spectral optical properties in UV, Vis and IR spectroscopy.     

硫掺杂ZnO纳米线的电化学制备及发光特性

"采用电场辅助电化学沉积法,利用阳极氧化铝模板模板制备了高度择优取向的硫掺杂ZnO单晶纳米线．X射线衍射仪、隧道电子显微镜、选取电子衍射对所得样品的结构、形貌分析表明,所得纳米线是沿(101)择优取向的六方纤锌矿结构单晶纳米线,长约几十微米、平均直径约70 nm. X射线光电子能谱对化学组成的分析进一步证实掺杂硫原子的存在．用荧光光谱仪(PL)对S掺杂前后的ZnO纳米线进行光学特性测量发现,S掺杂较大地改变了ZnO纳米线的发光性质．在PL谱中,除了有典型的ZnO纳米线在378、392 nm处的强紫外发光峰     

Different strategies for the synthesis of graphene/ZnO composite and its photocatalytic properties

Owing to its unique physical and chemical properties, graphene has attracted tremendous attention in the preparation of graphene-based composites for various applications. In this study, two different strategies have been developed to load zinc oxide (ZnO) nanorods onto reduced graphene oxide (RGO) sheets, i.e., in situ growth and a self-assembly approach. The microstructure and morphology of the synthesized RGO/ZnO nanocomposites was investigated by X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM) and Brunauer–Emmett–Teller (BET) measurements. Fluorescence emission spectra (PL) of RGO/ZnO composites were performed to attribute quality of combination between RGO and ZnO. Significantly enhanced photocatalytic activity of RGO/ZnO nanocomposites in comparison to bare ZnO nanoparticles was revealed by the degradation of methylene blue under irradiation, which can be attributed to the inhibition of electron–hole pair recombination and enhanced adsorption due to the presence of RGO sheets.     

Photoluminescence, FTIR and X-ray diffraction studies on undoped and Al-doped ZnO thin films grown on polycrystalline α-alumina substrates by ultrasonic spray pyrolysis

Undoped and aluminum-doped zinc oxide (ZnO) thin films have been grown on polycrystalline α-alumina substrates by ultrasonic spray pyrolysis (USP) technique using zinc acetate dihydrate and aluminum chloride hexahydrate (Al source) dissolved in methanol, ethanol and deionized water. A number of techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and photoluminescence (PL) were used to characterize the obtained ZnO thin films. It was seen that the orientation changed with increase in substrate temperature. During the ZnO deposition Zn source reacted with polycrystalline α-Al₂O₃ substrate to form an intermediate ZnAl₂O₄ spinel layer. It has been interestingly found that the intensity of green emission at 2.48 eV remarkably increased when the obtained ZnO:Al films were deposited at 380 °C. The FTIR absorbance intensity of spectroscopic band at 447±6 cm⁻¹ is very sensitive to oxygen sublattice disorder resulting from non-stoichiometry, which is consistent with the result of PL characterization.     

Influence of mesoporous substrate morphology on the structural, optical and electrical properties of RF sputtered ZnO layer deposited over porous silicon nanostructure

Morphological, optical and transport characteristics of the RF sputtered zinc oxide (ZnO) thin films over the mesoporous silicon (PS) substrates have been studied. Effect of substrate porosity on the grain growth and transport properties of ZnO has been analyzed. Physical and optical properties of ZnO-PS structures were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), and photoluminescence (PL) spectroscopy. Our experimental results indicate that on changing porosity of the PS substrates, regularity of the spatial distribution of the ZnO nanocrystallites can be controlled. While the morphology and grain size of ZnO depended strongly on the morphology and pore size of the PS substrates, the rectifying factors of the metal semiconductor junction were found to be different by a factor of 3. The deposition of semiconducting oxides on such mesoporous substrates/templates offers the possibility to control their properties and amplify their sensing response.     

Synthesis of zinc oxide porous structures by anodization with water as an electrolyte

We report a simple, reliable and one-step method of synthesizing ZnO porous structures at room temperature by anodization of zinc (Zn) sheet with water as an electrolyte and graphite as a counter electrode. We observed that the de-ionized (DI) water used in the experiment is slightly acidic (pH=5.8), which is due to the dissolution of carbon dioxide from the atmosphere forming carbonic acid. Porous ZnO is characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and photoluminescence (PL) studies. The current-transient measurement is carried out using a Gamry Instruments Reference 3000 and the thickness of the deposited films is measured using a Dektak surface profilometer. The PL, Raman and X-ray photoelectron spectroscopy are used to confirm the presence of ZnO phase. We have demonstrated that the hybrid structures of ZnO and poly (3,4-ethylenedioxythiophene):poly (styrene sulfonate) (PEDOT:PSS) exhibit good rectifying characteristics. The evaluated barrier height and the ideality factor are 0.45 eV and 3.6, respectively.