The influence of side groups and polarity of polymers on the kind and effectiveness of their surface modification by air plasma action

The changes of contact angle (θ) and surface free energy (γ_S) under low-temperature air plasma in the polymers of different chemical structure and polarity (polyethylene, PE; polypropylene, PP; poly(ethylene terephtalate), PET and poly(methyl methacrylate), PMMA) pointed out to the greater effect of short-time plasma action (5-15 s) on these parameters as compared to longer times of exposure.The non-reversion effect of θ changes caused by plasma in PE and PP suggests that the oxidation processes mainly decide about values in nonpolar polymers. The significantly greater θ changes in PE than those in PP indicate that the side groups present in the main chains impede oxidation of such a polymer by plasma.The reversion of θ changes in PET and in PMMA, and return of these values to almost the initial ones after 10 min storage proves that the main reason for θ changes in polar polymers is a certain alteration of the chain conformation.These changes, taking place after longer plasma treatment, suggest that the side ester groups in PMMA retard the above-mentioned conformational transformations. Then, in both kinds of polymers (polar and nonpolar) the structure of macrochain decides about the efficiency of reaction caused by plasma, and at the same time the side groups retard not only the oxidation processes but the conformational changes as well.     

Nematic conformation of oxyethylene spacers involved in main-chain liquid crystals

²HNMR measurements were performed on main-chain dimer and polymer liquid crystals (LC) having oxyethylene (OE) spacers -(OCH₂CH₂)_xO-(x=2, 3). The orientational as well as conformational characteristics of these molecules have been investigated in bulk and in a nematic solution. The OE spacer was found to take spatial arrangements characteristics of the nematic phase. The nematic conformation of the spacer remains nearly invariant over a wide range of temperature and concentration. In these analyses, the ratio of the deuterium quadrupolar splittings Δν/Δν^R (Δν: spacer and Δν^R: mesogenic unit) provided an important information regarding the spatial configuration of molecules in the LC state. The results obtained in this study are consistent with our previous conclusion drawn on a series of main-chain LC oligomers and polymers comprising n-alkane spacers -O(CH₂)_nO- (n=9, 10).     

Cholesterol-based dimeric liquid crystals: synthesis and mesomorphic behaviour

Chiral non-symmetric dimeric liquid crystals consisting of a cholesteryl ester moiety as chiral entity and a biphenyl aromatic core, interconnected through n-butyl (C₄) or n-pentyl (C₅) parity alkylene spacers, have been synthesized and investigated for their liquid crystalline properties. All the dimers exhibit enantiotropic mesophases. The first member of the dimers having the C₄ central spacer exhibit only the chiral nematic (N*) mesophase, while the higher homologues also show smectic A (SmA) and twist grain boundary (TGB) mesophases. The dimers of the other series containing the C₅ central spacer also have stable SmA, TGB and N* mesophases, except for the first which does not show the TGB phase. Both series of compounds show a weak odd-even effect with terminal alkyl chain substitution, while the spacer length has a marked influence on the phase transition temperatures.     

NMR investigation of the oxyethylene unit ordering in some related dialkoxy laterally substituted nematogens

Laterally dialkylated nematogens containing a short terminal polyoxyethylene chain present a wide nematic range starting from room temperature. The ordering of the oxyethylene (OE) unit has been studied by 13C NMR in the liquid crystalline phase. The values of the order parameters were derived from the transient oscillations observed during variable contact-time cross-polarization experiments. Along the oxyethylene chain, the order parameters decrease monotonically. These order parameter values do not present the usual odd-even effect and are noticeably smaller than those found for terminal alkoxy chains. Entering the nematic phase, the 13C thermal evolution of the field-induced chemical shift in the OE unit is far smaller than the one usually observed for terminal alkyl or alkoxy chains, regardless of their non-negligible order parameters. In addition,no linear correlation between the order parameter and the field-induced chemical shift is observed for the carbons in the OE unit. This is an indication that the proportion between gauche - and trans -conformations in the OE unit is temperature dependent.     

Nematogens containing oxyethylene units at a lateral or terminal position and their mixtures with salts

Short terminal polyoxyethylene chains may be introduced into mesogens containing lateral substituents such as two hexyloxy chains or a crown-ether fragment. These compounds have a large nematic range near room temperature and can dissolve large amounts of the salt LiBF₄ without destroying the nematic arrangment. In the nematic phase, the ions are ordered and the quadrupolar splitting associated with these ions can allow this ordering to be monitored. Increasing the salt concentration does not seem to change the ordering of the individual ions. The ¹³C thermal evolution of the field-induced chemical shift in the oxyethylene (OE) units with or without salt does not show any real difference, indicating that the interaction between the ions and the mesogen is small. This means that there is very little change in conformation in the OE unit when adding salt to the mesogen.     

Is the alignment of nematics on a polymer slab always along the rubbing direction? A molecular dynamics study

ABSTRACT

We have studied the alignment and molecular organisation within a thin film of the popular nematic 5CB sandwiched between two flat polymer slabs, examining the effect of polymer chemical nature and morphology with atomistic molecular dynamics simulations. We have chosen two common polymers: polystyrene (PS) and polymethylmethacrylate (PMMA), either with their chains in random coil conformation (disordered) or with chains unidirectionally stretched (ordered). We found that, independently on the arrangement of the chains, both surfaces align planarly the liquid crystal, in accord with experimental observation. Moreover, while 5CB molecules align along the chains stretching direction of the PMMA ordered surface, on the combed PS surface they arrange on average perpendicularly to the stretching direction. This behaviour is attributed to the chemically specific interactions between the respective aromatic moieties of PS and 5CB.     

Synthesis and phase behaviour of a homologous series of polymethacrylate-based side-chain liquid crystal polymers

The homologous series of side chain liquid crystal polymers, the poly[ω-(4-methoxyazobenzene-4′-oxy)alkyl methacrylate]s, has been prepared in which the length of the flexible alkyl spacer has been varied from 3 to 11 methylene units. All the polymers exhibit liquid crystalline behaviour. The propyl and butyl members show exclusively nematic behaviour. The pentyl, hexyl, octyl and decyl members show a nematic and a smectic A phase while the heptyl, nonyl and undecyl homologues exhibit only a smectic A phase. The smectic A phase has been studied using X-ray diffraction and assigned as a smectic A₁ phase in which the side chains are fully overlapped and the backbones are confined to lie between the smectic layers. For the nonyl member an incommensurate smectic phase is observed. The dependence of the transition temperatures on the length of the flexible spacer is understood in terms of the average shapes of the side chains.     

Ordering of a lateral crown ether and terminal short POE chains in some symmetrical nematogens by 13 C NMR

A lateral crown ether fragment can be introduced on symmetrical mesogens containing only three aromatic rings. The replacement of the terminal alkoxy chains by chains containing oxyethylene units decreases the melting and clearing temperatures allowing one to obtain nematic compounds near room temperature. These compounds dissolve LiBF₄ salt only to a small extent, but the nematic arrangement, is thereby destroyed. The carbon chemical shift anisotropy and the local C-H bond order parameters were obtained for the nematic phase for the crown ether fragment and the terminal chains. This study indicates that the crown ether average conformation changes insignificantly on decreasing the temperature. The lateral crown ether protrudes markedly from the core with the consequence that the molecular shape is far from rod-like in geometry.     

Unsymmetrical dimers possessing a cholesteryl ester moiety and a difluoro-substituted biphenyl core: synthesis and mesomorphic behaviour

Some new unsymmetrical dimers consisting of a cholesteryl ester moiety, covalently linked to either a 4′-(1,3-difluoro-4-n-octyloxy) biphenyloxy or a 4′-(2,3-difluoro-4-n-decyloxy) biphenyloxy through odd-even parity paraffinic central spacers, have been synthesized and investigated for their mesomorphic behaviour. Except for one, all the dimers exhibit enantiotropic smectic A, twist grain boundary (TGB) and chiral nematic mesophases. Five of the eight unsymmetrical dimers synthesized show a chiral smectic C (SmC*) phase. Interestingly in some of the compounds the SmC* exists over a wide temperature range including room temperature. Among the eight compounds, a dimer having a C₇ central paraffinic spacer and a C₈ alkoxy terminal chain shows an enantiotropic twist grain boundary with SmC* blocks (TGB_C*) phase. It appears that the variation in the length of the spacer has a remarkable influence on the phase transition temperatures as well as on the mesomorphic behaviour.     

Thermophysical properties of azomethine ether main-chain liquid crystalline polymers at pressures to 200 MPa

This article reports on an experimental investigation of the equation of state and the transition behavior of main-chain thermotropic liquid crystalline polymers over a wide temperature range, and at pressures to 200 MPa. The materials studied were a series of azomethine ether polymers. A varying number n (= 4, 7, 8, 9, 10 and 11) of methylene spacer units in the backbone provided systematic variation of the structure. Experimental techniques used included high-pressure dilatometry (PVT measurements) to 200 MPa, high-pressure differential thermal analysis, also to 200 MPa, and conventional (atmospheric-pressure) differential scanning calorimetry (DSC). The equation of state of the materials can be well represented by the Tait equation in distinct regions, separated by a glass transition, T_g(P), a first-order transition to a nematic state, T_k-n(P), and a first-order transition to an isotropic melt state T_c(P). The atmospheric pressure values of T_k-n and T_c decreased with increasing number of spacer units and showed a clear odd-even effect. T_g and T_k-n both increased with pressure. The pressure dependence of T_c could not be observed due to the onset of degradation in the same temperature region. On isobaric cooling at 3°C/min, the crystallization from the nematic state occurred a few tens of degrees below T_k-n. This supercooling was independent of pressure for some materials, while for others it increased with increasing pressure. The values of the enthalpy and entropy associated with the first-order transition into the nematic state were lower than those of typical isotropic polymers at their melting transitions. The transition enthalpy did not have any systematic variation with increasing number of spacer units. Values of the transition enthalpy calculated from the Ciapeyron equation did not always agree with the values measured by DSC. This may be due to the two-phase nature of the low-temperature state. At the transition to the isotropic state, the transition enthalpy at P = 0 decreased with n and showed an odd-even effect. © 1994 John Wiley & Sons, Inc.     

Gel formation in cationic polymerization of divinyl ethers. II. 2,2-Bis{4-[(2-vinyloxy)ethoxy]phenyl}propane

Cationic polymerization of 2,2-bis{4-[(2-vinyloxy)ethoxy]phenyl}propane [CH₂CH O CH₂CH₂O C₆H₄ C(CH₃)₂ C₆H₄ OCH₂CH₂ O CHCH₂; 2], a divinyl ether with oxyethylene units adjacent to the polymerizable vinyl ether groups and a bulky central spacer, was investigated in CH₂Cl₂ at 0°C with the diphenyl phosphate [(C₆H₅O)₂P(O)OH]/zinc chloride (ZnCl₂) initiating system. The polymerization proceeded quantitatively and gave soluble polymers up to 85% monomer conversion. In the same fashion as the polymerization of 1,4-bis[2-vinyloxy(ethoxy)]benzene (CH₂CH O CH₂CH₂O C₆H₄ OCH₂CH₂ O CHCH₂; 1) that we already studied, the content of the unreacted pendant vinyl ether groups of the produced soluble polymers decreased with monomer conversion, and almost all the pendant vinyl ether groups were consumed in the soluble products prior to gelation. Alternatively, endo-type double bonds were gradually formed in the polymer main chains by chain transfer reactions and other side reactions as the polymerization proceeded. The polymerization behavior of isobutyl vinyl ether (3), a monofunctional vinyl ether, under the same conditions, showed that the endo-type olefins in the polymer backbones are of no polymerization ability with the growing active species involved in the present polymerization systems. These results indicate that the intermolecular crosslinking reactions occurred primarily by the pendant vinyl ether groups, and the final stage of crosslinking process leading to gelation also may occur by the small amount of the residual pendant vinyl ether groups (supposedly less than 2%). The formation of the soluble polymers that almost lack the unreacted pendant vinyl ether groups is most likely due to the frequent occurrence of intramolecular crosslinking reactions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1931–1941, 1999     

Molecular dynamics and ordering of side chain liquid crystal polymers as studied by paramagnetic resonance

Abstract

Molecular dynamics of side chain liquid crystalline polymers (LCP) and their components were studied using the technique of paramagnetic resonance. A cigar shape spin probe (COL) and a nearly spherical spin probe (TPL) were used to study the motions and order of the LCPs. Computer simulations of the observed spectra were performed. Both rotational correlation times and order parameters were extracted from these simulations. We found that LCPs containing 30 per cent and 50 per cent of mesogenic side chains had about the same viscosity as indicated by nearly equal tumbling times at the same temperature. In addition, the LCPs motion is considerably slower than that of the monomeric liquid crystal indicating that the spacer couples the motions of the side chains to those of the main chain. Rotations about axes perpendicular to the side chain are slowed more than rotations about an axis parallel to the side chain. DSC measurements were employed to study the phase transitions. The 30 and 50 per cent LCPs displayed first order NS_A transitions, but the 50 per cent LCPs transition was much weaker, in agreement with McMillan's theory which predicts a first order transition for T _NS/T _NI>0.87 (observed ratios are 0.98, 0.90 and 0.86 for 30, 50 and 100 per cent LCPs, respectively). The 30 per cent LCP has a very short nematic range so that the nematic order, which is not saturated at the NS transition, can couple with the smectic order. This was indicated by a sharp change in slope of the order parameter versus temperature plot as the smectic is entered. The LCPs studied formed a highly ordered glass when cooled in a 1 T field. If one could find a LCP with similar ordering properties whose glass temperature is well above room temperature, then one would have a useful binder for the manufacture of haze-free polymer dispersed liquid crystal displays.     

λ-Shaped liquid crystal trimers with dual terminal cholesteryl moieties: synthesis and concomitant of N*, SmA and cholesteric glassy phases

Two homologous series of λ-shaped chiral liquid crystal trimers composed of a laterally substituted benzylidene-aniline as the central core armed by two cholestryl ester moieties via odd-even alkyl spacer are synthesised. All the compounds are mesogenic exhibiting both chiral nematic (N*) and SmA phases except for trimers bearing long spacers (n = 9–10). A pronounced odd-even effect is observed on the phase transition temperatures and clearing enthalpies when the spacer length is varied in which the even-parity members show higher value. The widening of N* phase upon elongation of the alkyl spacer can be interpreted as a result of the destabilisation of SmA phase. Full recrystallisation from the cholesteric phase upon cooling is not observed for all the compounds bearing long spacer, especially oxydecanoyl spacer. Instead, the anisotropic fluid vitrified to form the cholesteric glassy state characteristic of polymer at low temperature. This finding is also evident from the polarising optical microscope whereby non-crystalline texture which resembles the Grandjean texture with various reflection colours is observed upon cooling to low temperature. The effect of the lateral substituents on the liquid-crystalline behaviour is also discussed.     

Liquid crystal polymers 23. Steric and polar effects of large substituents in thermotropic aromatic polyesters with decamethylene spacers

A series of thermotropic aromatic polyesters based on a triad ester mesogenic unit containing an arylsulfonyl substituted hydroquinone group and a decamethylene spacer group was prepared. The large arylsulfonyl substituent was substituted in the para-position with either electron donating or accepting groups to study the effect of steric and polar interactions on the thermal transitions of these polymers and on the thermodynamic parameters of their isotropization transitions. All polymers formed nematic melts, and a regular decrease in T₁, ΔH₁ and ΔS₁ was observed with increasing molecular radius of the substituted hydroquinone group. However, a polarity or polarizability effect was superimposed on these relationships. Model compounds containing the same aromatic ester triad were prepared and their thermotropic properties were compared to those of the polymers. Essentially identical effects were observed for both.     

Viscosities of dilute polymer solutions in nematic liquids

A nematic fluid is characterized by five friction coefficients. When dilute polymer coils are added to the fluid, all these coefficients are modified. Three Miesowicz viscosities (measured under an aligning magnetic field) and two coupling coefficients between orientation and flow are discussed. In our calculation, elastic dumbbells are used to model the flexible polymer chains. The results are written in terms of two size parameters R_∥ and R_⊥ and two chain friction coefficients λ_∥ and λ_⊥ (the label ∥ refers to a direction parallel to the nematic axis). This could be compared to other experiments (such as translational diffusion) which measure λ_∥ and _⊥ directly. They may give useful estimates of coil conformation in nematic solvents.     

Facile Synthesis of Liquid Crystal Dimers Bridged with a Phosphonic Group

Liquid crystal (LC) dimers with well-defined composition and structure arouse broad attentions for their exhibiting LC properties beyond conventional low molar mass mesogens and serving as fascinating model compounds for LC polymers. Here in this work, a series of LC dimers bridged with a phosphonic group have been synthesized through a facile free radical mediated addition reaction between hypophosphorous acid and vinyl terminated cyanobiphenyl mesogens with variant length alkyl spacers. In addition, two esterified derivatives and a group of mono-addition homologues with a terminal phosphonic acid group have also been prepared for comparison study. All the newly synthesized compounds exhibit monotropic nematic (N) phase with typical schlieren textures except for the LC dimer with the longest eleven-methylene spacer, which surprisingly shows twist-bend nematic (N_TB) phase directly from the isotropic state upon cooling. Moreover, the thermal transition properties such as the nematic-isotropic transition temperatures and associated entropy changes of the series LC dimers display a modest odd-even effect. Furthermore, both the LC dimers and the mono-addition homologues in N phase are quite easy to achieve homeotropic alignment upon annealing thanks to the supramolecular interactions between the introduced phosphonic acid group and the hydroxylated glass surface. This work thus provides a novel synthesis strategy for a class of LC materials bridged with a phosphonic acid group prone to further functionalization, which may serve as promising vertical alignment agents and pave the way for developing a new kind of functionalized LC materials of N_TB phase.     

Persistence vectors for polypropylene,polystyrene, and poly(methyl methacrylate) chains

Persistence vectors a ≡ 〈 r 〉 are calculated for polypropylene, polystyrene, and poly(methyl methacrylate) chains as functions of chain length and stereochemical constitution. Differences between the progressions of a with chain length for these vinyl polymers are related to their conformational characteristics. The preferences of the syndiotactic chains for the tt dyad conformation are manifested most strikingly in the behavior of this vector.     

Synthesis of poly(vinyl acetate) with fluorescence via a combination of RAFT/MADIX and “click” chemistry

A novel ω-azido-functionalized RAFT reagent, O-(2-azido-ethyl) S-benzyl dithiocarbonate (AEBDC), was synthesized and subsequently employed to mediate the reversible addition-fragmentation chain transfer (RAFT) polymerization of vinyl acetate (VAc) to prepare end-functionalized polymers. The polymerization results showed that the RAFT polymerizations of VAc could be well controlled using AEBDC as the RAFT agent. Number-average molecular weights (M_n GPC) increased linearly with monomer conversion, and molecular weight distributions were relatively narrow. ¹H NMR spectrum of the poly(vinyl acetate) (PVAc) confirmed the existence of functional azido group at the end of the polymers chains. The ω-azido-terminated polymers were coupled by “click” chemistry with a fluorescent alkyne, 7-propinyloxy coumarin, to prepare fluorescent PVAc. The fluorescence properties of the PVAc homopolymers before and after coupling with 7-propinyloxy coumarin in CH₂Cl₂ solution were investigated.     

Bromine-terminated azobenzene liquid crystals

A series of liquid crystals (LCs) of bromine-terminated azobenzene were synthesised and characterised. The LCs were composed of an azobenzene core, an alkyl chain and a flexible spacer with a bromine atom at a remote position. Mesomorphic properties were dependent on both the alkyl chain length and the relative position of the bromine atom at the end of the spacer group. The nematic phase was favoured over the smectic A phase for alkyl chains with one and seven carbon atoms. However, the SmA mesophase was dominant for compounds with 10-carbon alkyl chains. The remote bromine atom in the spacer group favoured SmA for homologous with n-decyl chains and the nematic phase for n-heptyl and methyl groups. Molecular modelling showed that the azobenzene LCs tended to adopt the all trans-conformation in the gas phase as the number of carbon atoms increased. For short spacer groups, bent conformations contributed to the level population proportion of conformers. For the non-LC 5a, the gauche conformation became the most stable with a torsional angle of –68.9°. X-ray experiments showed a monolamellar SmA mesophase in an antiparallel arrangement. Absorption maxima at 360 and 440 nm were assigned to π–π* and n–π* transitions, respectively.     

Living cationic polymerization of ethyl 2-(vinyloxy)ethoxyacetate: A vinyl ether with an ether and an ester function in the pendant

Ethyl 2-(vinyloxy)ethoxyacetate ( 4 ; CH₂?CH? OCH₂CH₂OCH₂? COOC₂H₅), a vinyl ether having both carboxylic acid ester and oxyethylene unit in its pendant, afforded well-defined living polymers when polymerized by the hydrogen iodide/iodine (HI/I₂) initiating system in toluene at ?40°C. The polymers possessed a narrow molecular weight distribution (M _w/M _n ≤ 1.15), and their molecular weight (M _n) increased proportionally to monomer conversion or the molar ratio of the monomer to hydrogen iodide. The polymer molecular weight also increased upon addition of a fresh feed of the monomer to a completely polymerized reaction mixture. Polymers of high molecular weights (M _n > 5 × 10⁵) and broad molecular weight distributions were obtained by BF₃OEt₂ in toluene at ?40°C. Polymerization rate of 4 with HI/I₂ is ca. 100 times greater than that of the corresponding alkyl vinyl ether, and thus 4 was found to be one of the most reactive vinyl ethers thus far studied. Alkaline hydrolysis of the pendant ester groups of the polymers gave a vinyl ether-based polymeric carboxylic acid 6 with a narrow molecular weight distribution.