Parallel changes in non-photochemical quenching properties, photosynthesis and D1 levels at sudden, prolonged irradiance exposures in Ulva fasciata Delile

The photosynthetic response to a sudden and prolonged high irradiance exposure and following recovery at low irradiance were studied with the aim of investigating the ability to withstand and adapt to high irradiance without prior high light adaptation. When thalli of Ulva fasciata, accustomed to a low irradiance (80 micromol photons m(-2) s(-1)), were exposed to a high irradiance (1500 micromol photons m(-2) s(-1)), the D1 protein was rapidly degraded, reaching a steady-state level after 110 min. This was followed by a fast recovery when thalli were transferred to dim light. The overall ability of non-photochemical quenching of chlorophyll fluorescence decreased and levelled off at a sudden and prolonged exposure to high irradiance and followed the same trend as the D1 level with a fast recovery in dim light. Ulva had intrinsic means to acclimate rapidly to high irradiance, when non-photochemical quenching did not operate properly, by maintaining a smaller fraction of high light tolerant PSII assemblages and by maintaining a high non-photochemical quenching capacity of chlorophyll fluorescence in relation to the variable fluorescence. The overall absorption of light (400-700 nm) remained high during the period of high irradiance exposure. When Ulva were deprived of nutrients in the form of PES media the ability of non-photochemical quenching decreased at photoinhibitory conditions. The possible causes for the responses at prolonged irradiance and the mechanisms for the decrease of non-photochemical quenching are discussed, with implications for field measurements.     

高交联大孔苯乙烯/二乙烯苯共聚物的合成及其孔结构的研究Ⅱ

本文对高交联大孔苯乙烯/二乙烯苯共聚物在干态、湿态与溶胀态的孔结构进行了研究。结果表明,在不同的状态中,高交联共聚物的孔结构是不相同的,它们的孔结构会发生变化。但是,它们的孔结构变化远小于低交联共聚物,也就是说,高交联大孔共聚物的孔结构比低交联共聚物的孔结构稳定。 鉴于高交联大孔共聚物的孔结构较稳定,作者把它用作高效液相色谱的进行了初步实验。结果表明,高交联共聚物可做为高效液相色谱的载体固定相。     

Aromatic liquid crystals with a trifluoromethyl group in the terminal chain for use in nematic LC mixtures

A new class of compounds suitable for LCD applications has have synthesized, incorporating a trifluoromethyl group in the terminal alkoxy or alkenyloxy chain. These compounds fulfil many of the specifications for use in TN-LCDs. Compounds containing several aromatic rings were synthesized with a view to producing compounds of high birefringence. This aspect also included the synthesis of compounds containing a carbon-carbon triple bond. Materials with three phenyl rings were also prepared in an attempt to produce nematic liquid crystals with a high clearing point and a high birefringence. Molecules containing a lateral fluoro substituent were synthesized in order to generate a high positive value of the dielectric anisotropy, a low melting point and no smectic mesophases. A series of compounds incorporating a carbon-carbon double bond was prepared in an attempt to produce compounds with a high nematic clearing point and a high birefringence.     

Biredox Eutectic Electrolytes Derived from Organic Redox‐Active Molecules: High‐Energy Storage Systems

One promising candidate for high‐energy storage systems is the nonaqueous redox flow battery (NARFB). However, their application is limited by low solubility of redox‐active materials and poor performance at high current density. Reported here is a new strategy, a biredox eutectic, as the sole electrolyte for NARFB to achieve a significantly higher concentration of redox‐active materials and enhance the cell performance. Without other auxiliary solvents, the biredox eutectic electrolyte is formed directly by the molecular interactions between two different redox‐active molecules. Such a unique electrolyte possesses high concentration with low viscosity (3.5 m , for N‐butylphthalimide and 1,1‐dimethylferrocene system) and a relatively high working voltage of 1.8 V, enabling high capacity and energy density of NARFB. The resulting high‐performance NARFB demonstrates that the biredox eutectic based strategy is potentially promising for low‐cost and high‐energy storage systems.     

Aromatic liquid crystals with a trifluoromethyl group in the terminal chain for use in nematic LC mixtures

A new class of compounds suitable for LCD applications has have synthesized, incorporating a trifluoromethyl group in the terminal alkoxy or alkenyloxy chain. These compounds fulfil many of the specifications for use in TN-LCDs. Compounds containing several aromatic rings were synthesized with a view to producing compounds of high birefringence. This aspect also included the synthesis of compounds containing a carbon-carbon triple bond. Materials with three phenyl rings were also prepared in an attempt to produce nematic liquid crystals with a high clearing point and a high birefringence. Molecules containing a lateral fluoro substituent were synthesized in order to generate a high positive value of the dielectric anisotropy, a low melting point and no smectic mesophases. A series of compounds incorporating a carbon-carbon double bond was prepared in an attempt to produce compounds with a high nematic clearing point and a high birefringence.     

聚合物在高压下的结构、形态和性能（下）

聚合物在高压下的结构、形态和性能（下）张雄伟，黄锐（成都科技大学塑料工程系，成都，６１００６５）在上篇中我们介绍了结晶性聚合物在高压下结晶的结构和形态。本篇将介绍聚合物在高压下的结晶动力学和热力学以及聚合物在高压下的退火等方面内容。２高压结晶动力学研...     

Silver mirror reaction as an approach to construct superhydrophobic surfaces with high reflectivity

Superhydrophobic surfaces with high reflectivity might provide a promising self-cleaning approach in a wide variety of optical applications ranging from traffic to solar energy industries. However, the contradiction between the hierarchical micronanostructure and the high reflectivity is a challenge for superhydrophobic materials with high reflectivity. Here we report a facile method to fabricate a superhydrophobic silver film with reflectivity as high as that of polished silicon by carefully controlling the seed-induced silver mirror reaction.     

Facile synthesis of hollow Ti_2Nb_(10)O_(29) microspheres for high-rate anode of Li-ion batteries

Titanium niobium oxides emerge as promising anode materials with potential for applications in lithium ion batteries with high safety and high energy density.However,the innate low electronic conductivity of such a composite oxide seriously limits its practical capacity,which becomes a serious concern especially when a high rate charge/discharge capability is expected.Here,using a modified template-assisted synthesis protocol,which features an in-situ entrapment of both titanium and niobium species during the formation of polymeric microsphere followed by a pyrolysis process,we succeed in preparing hollow microspheres of titanium niobium oxide with high efficiency in structural control.When used as an anode material,the structurally-controlled hollow sample delivers high reversible capacity(103.7 m A h g~(-1)at 50 C)and extraordinary cycling capability especially at high charge/discharge currents(164.7 m A h g~(-1)after 500 cycles at 10 C).     

Extraordinary Supercapacitor Performance of a Multicomponent and Mixed‐Valence Oxyhydroxide

We report a novel multicomponent mixed‐valence oxyhydroxide‐based electrode synthesized by electrochemical polarization of a de‐alloyed nanoporous NiCuMn alloy. The multicomponent oxyhydroxide has a high specific capacitance larger than 627 F cm^?3 (1097±95 F g^?1) at a current density of 0.25 A cm^?3, originating from multiple redox reactions. More importantly, the oxyhydroxide electrode possesses an extraordinarily wide working‐potential window of 1.8 V in an aqueous electrolyte, which far exceeds the theoretically stable window of water. The realization of both high specific capacitance and high working‐potential windows gives rise to a high energy density, 51 mWh cm^?3, of the multicomponent oxyhydroxide‐based supercapacitor for high‐energy and high‐power applications.     

高挥发分烟煤的热解、燃烧特性研究

采用固定床热解反应器、热解 红外联用仪 (Py FTIR)和热重分析仪 ,考察了高挥发分烟煤的热解、燃烧特性 ,实验结果表明 ,高挥发分烟煤在热解过程中放出大量烃类气体 ,从燃烧试验看 ,明显分为热解段和燃烧段 ,且热解段挥发分的释放非常迅速 ,从而揭示出高挥发分烟煤燃烧过程中产生大量黑烟的原因。     

Phase‐Transition Induced Conversion into a Photothermal Material: Quasi‐Metallic WO2.9 Nanorods for Solar Water Evaporation and Anticancer Photothermal Therapy

Phase transition from WO₃ to sub‐stoichiometric WO_2.9 by a facile method has varied the typical semiconductor to be quasi‐metallic with a narrowed band gap and a shifted Femi energy to the conduction band, while maintaining a high crystallinity. The resultant WO_2.9 nanorods possess a high total absorption capacity (ca. 90.6 %) over the whole solar spectrum as well as significant photothermal conversion capability, affording a conversion efficiency as high as around 86.9 % and a water evaporation efficiency of about 81 % upon solar light irradiation. Meanwhile, the promising potential of the nanorods for anticancer photothermal therapy have been also demonstrated, with a high photothermal conversion efficiency (ca. 44.9 %) upon single wavelength near‐infrared irradiation and a high tumor inhibition rate (ca. 98.5 %). This study may have opened up a feasible route to produce high‐performance photothermal materials from well‐developed oxides.     

Ionic liquid crystal as a hole transport layer of dye-sensitized solar cells

Use of a new ionic liquid crystal, 1-dodecyl-3-methylimidazolium iodide, and iodine as an electrolyte of dye-sensitized solar cells leads to a high short circuit photocurrent density and a high light-to-electricity conversion efficiency, due to a self-assembled structure of the imidazolium cations, resulting in high conductivity of the electrolyte.     

New carbon nanofiber/graphite felt composite for use as a catalyst support for hydrazine catalytic decomposition

Graphite felt supporting 40 nm diameter carbon nanofibers was synthesized and successfully used as a support for a high loaded iridium catalyst (30 wt%) in the decomposition of hydrazine; a strong mechanical resistance and a high thermal conductivity led to a very efficient and stable catalyst as compared to that used industrially, iridium supported on a high surface area alumina.     

Mechanisms of antioxidant action: Mechanochemical addition of thiol antioxidants to ABS

It is shown that thiol-containing antioxidants and stabilisers can be chemically reacted with ABS in high yields and in substantial concentrations under conditions of high temperature and high shear during processing. The resulting antioxidant concentrates are shown to be very effective thermal and photo-oxidative stabilisers for ABS when used as masterbatch additives for unstabilised ABS. Synergistic combinations of a bound antioxidant (BHBM (I(a))) and a bound uv stabiliser (EBHPT (II)) confer a high level of uv stability on ABS when incorporated into ABS. All the antioxidants show a high resistance to removal from the polymer by solvent extraction. The effect of the mechano-chemical process on the efficiency of adduct formation and on the effectiveness of the stabilisers so formed is discussed.     

SPEEK/PES-C、SPEEK/SPES-C共混质子交换膜研究

通过在磺化聚醚醚酮(SPEEK,DS=61.68%)中分别混入酚酞型聚醚砜(PES-C)、磺化酚酞型聚醚砜(SPES-C,DS=53.7%)制备出SPEEK/PES-C、SPEEK/SPES-C共混质子交换膜.结果表明,共混的两种聚合物之间均具有较好的相容性.PES-C、SPES-C的混入能有效降低膜的溶胀及甲醇透过,且随着共混量的增加,这种作用越趋明显.纯SPEEK膜在75℃左右溶解,而SPEEK/PES-C(30 wt%)、SPEEK/SPES-C(30 wt%)共混膜在80℃时溶胀度仅为22.5%、26.32%.在室温至80℃范围内,纯SPEEK及共混膜的甲醇透过系数都在10-7 cm2·s-1数量级上,远小于Nation[R]115膜.在饱和湿度下,温度大于90℃时,SPEEK/PES-C(20 wt%)共混膜电导率超过Nation[R]115膜;温度大于110℃时,SPEEK/SPES-C(30 wt%)共混膜电导率与Nafion[R]115膜相当,达到0.11 S·cm-1.高电导率,低透醇系数以及明显提高了的可使用温度表明该类共混膜有望在DMFC中使用.     

Rapid MALDI‐TOF molecular imaging: Instrument enhancements and their practical consequences

A new high performance linear MALDI‐TOF mass spectrometer provides both high spatial resolution and high speed. This instrument employs a new ion optics system with a grounded ion source and efficient transfer and detection of ions over a broad mass range. This provides very high sensitivity, precision, and an extended dynamic range for both positive and negative ion detection. Here we demonstrate the capabilities of this system by imaging pancreatic tissue samples from rats and mice.     

Electrochemical Synthesis of Tetrahexahedral Rhodium Nanocrystals with Extraordinarily High Surface Energy and High Electrocatalytic Activity

Noble metal nanocrystals (NCs) enclosed with high‐index facets hold a high catalytic activity thanks to the high density of low‐coordinated step atoms that they exposed on their surface. Shape‐control synthesis of the metal NCs with high‐index facets presents a big challenge owing to the high surface energy of the NCs, and the shape control for metal Rh is even more difficult because of its extraordinarily high surface energy in comparison with Pt, Pd, and Au. The successful synthesis is presented of tetrahexahedral Rh NCs (THH Rh NCs) enclosed by {830} high‐index facets through the dynamic oxygen adsorption/desorption mediated by square‐wave potential. The results demonstrate that the THH Rh NCs exhibit greatly enhanced catalytic activity over commercial Rh black catalyst for the electrooxidation of ethanol and CO.     

Study of dielectric properties of styrene-acrylonitrile graphite sheets composites in low and high frequency region

Conducting polymer composites should have a high dielectric constant and a high dissipation factor in the low and high frequency regions if they are to be used in charge storing devices, decoupling capacitors and electromagnetic interference shielding applications. Currently, extensive research is being carried out to enhance the dielectric constants of graphite-polymer, ceramic powder-polymer, metal powder-polymer and nanotube-polymer composites in the low frequency region. In this paper, we present the dielectric properties of styrene-acrylonitrile (SAN)-graphite sheets (GS) composites in the low and high frequency ranges. SAN-GS composites were prepared by the mixing process and by the hot compression mold technique. The composites showed a high dielectric constant and a high dissipation factor in the low and radio frequency region. Furthermore, the EMI shielding properties of these composites are evaluated in the radio frequency range. The conductivity and the dielectric constant of the SAN/GS composites increased with the addition of GS composites, and followed the power law model of percolation theory. The dielectric constant and the dissipation factor of the composites were analyzed according to the low and high frequency region.     

改善高氯卤化银乳剂的高照度性能

本实验制备了高氯卤化银立方体系列乳剂和高氯卤化银(100)晶面T颗粒乳剂,对高氯卤化银立方体乳剂进行了不同种类掺杂剂的掺杂试验.通过测定以上各乳剂在常规曝光和高照度曝光下的照相性能,表明了在高氯卤化银乳剂中掺杂碘化物、掺杂铱络合物和掺杂浅电子陷阱掺杂剂都可以不同程度地改善乳剂的高照度性能,几种改进措施的结合效果更好.     

Separation of intact proteins on γ‐ray‐induced polymethacrylate monolithic columns: A highly permeable stationary phase with high peak capacity for capillary high‐performance liquid chromatography with high‐resolution mass spectrometry

Polymethacrylate‐based monolithic capillary columns, prepared by γ‐radiation‐induced polymerization, were used to optimize the experimental conditions (nature of the organic modifiers, the content of trifluoroacetic acid and the column temperature) in the separation of nine standard proteins with different hydrophobicities and a wide range of molecular weights. Because of the excellent permeability of the monolithic columns, an ion‐pair reversed‐phase capillary liquid chromatography with high‐resolution mass spectrometry method has been developed by coupling the column directly to the mass spectrometer without a flow‐split and using a standard electrospray interface. Additionally, the high working flow and concomitant high efficiency of these columns allowed us to employ a longer column (up to 50 cm) and achieve a peak capacity value superior to 1000. This work is motivated by the need to develop new materials for high‐resolution chromatographic separation that combine chemical stability at elevated temperatures (up to 75°C) and a broad pH range, with a high peak capacity value. The advantage of the γ‐ray‐induced monolithic column lies in the batch‐to‐batch reproducibility and long‐term high‐temperature stability. Their proven high loading capacity, recovery, good selectivity and high permeability, moreover, compared well with that of a commercially available poly(styrene‐divinylbenzene) monolithic column, which confirms that such monolithic supports might facilitate analysis in proteomics.