成都城区近地表大气尘源解析研究

运用因子分析法对成都城区近地表大气尘(NGD)的来源进行了解析,得到的主要排放源有:建筑尘、冶金尘、植物焚烧尘、煤烟尘(含土壤尘)、交通尾气尘、颜料涂料排放尘和城市垃圾尘。运用受体模型的化学质量平衡法对成都城区NGD的来源进行了解析,各排放源的贡献率分别是:土壤尘11.4%,建筑尘12.4%,煤烟尘5.8%,冶金尘11.2%,城市综合尘59.3%。     

城市环境近地表大气尘研究的意义及进展

近地表大气尘采集于人的平均呼吸高度,是较长时间累积的大气颗粒物和地表扬尘的混合物,通过化学成分、矿物组成、粒度分析,可直接获取对人体健康的影响因素,是小区域及城市环境元素迁移转化研究的重要介质,它补充了大气污染0～5 m高度梯度上的研究,对城市环境的治理、城市建设的规划和元素在城市生态环境中迁移转化机理的研究有着十分重要的意义。     

铅同位素在示踪城市环境污染源研究中的应用

在分析铅同位素示踪环境铅污染源理论的基础上,以成都市为例,对成都市城市环境（土壤、大气降尘、主要水系沉积物）铅污染的主要来源进行了研究.结果表明,成都市城市环境污染主要来自于燃煤扬尘和汽车尾气排放.铅同位素示踪理论应用于城市环境污染源的研究,能够取得比较理想的结果.     

燃烧源PM2.5凝结洗涤脱除实验研究

利用蒸汽在燃烧源PM2.5表面凝结,促使PM2.5凝结长大,建立一套燃烧源PM2.5凝结洗涤的实验台;考察了颗粒粒径分布、蒸汽添加量、液气比等对两种燃烧源PM2.5凝结洗涤脱除效果的影响。采用电称低压冲击器 (ELPI)在线测试分析燃煤和燃油PM2.5凝结洗涤前后的数浓度和粒径分布特性,并用SEM和XPS对两种不同燃烧源的颗粒进行了形貌和元素组分分析。结果表明,燃煤和燃油产生的PM2.5形貌和组分具有较大的差别,燃煤PM2.5主要为硅铝矿物质,而燃油PM2.5主要为含炭物质;相同条件下,燃煤PM2.5相变脱除效果优于燃油PM2.5;随着蒸汽添加量的增加,两者的脱除效率均升高;随粒径的增大,脱除效率提高;蒸汽添加量为0.08kg/m3时,粒径为0.4μm的燃煤和燃油细颗粒的脱除效率分别81％和72％;此外,适当增加液气比有利于凝结长大含尘液滴的脱除。     

汞监测市场即将启动

<正>我国工业锅炉数量多,且主要分布在人口密集的居住区和工业区,对当地的环境空气质量影响大。新修订的《锅炉大气污染物排放标准》增加了在用和新建燃煤锅炉的汞及其化合物的排放限值。其中,汞及其化合物限值为0.05mg/m3,测定方法标准采用的是HJ543固定污染源废气汞的测定冷原子吸收分光光度法(暂行)。《锅炉大气污染物排放标准》中要求,锅炉使用企业应按     

化学抑尘剂的研究进展

总结了近八年来国内外化学抑尘领域的研究进展,阐述了近年来化学抑尘剂的主要研究方向及类型,分析了各种新型抑尘剂的特点、抑尘机理、效果及存在的主要问题,以期为今后更好开发和使用抑尘剂从而解决开放性尘源扬尘污染问题创造条件。     

长株潭地区土壤环境地球化学研究

通过长株潭地区环境地球化学调查工作的实施,对长株潭地区土壤环境地球化学研究的工作方法进行了初步研究。结果显示,工业区重金属中Cu、Zn、Pb、As、Cd的污染较严重,尤其是Cd,这说明工业生产所产生的废水、废气、废渣是引起土壤中重金属污染的主要原因;各功能区重金属含量由高到低顺序为:工业区,居民区,商业办公区,休闲区,居民区和休闲区中重金属超标可能是由生活废水、生活垃圾和汽车尾气引起的。     

直接进样-冷原子吸收分光光度法测定大气颗粒物中汞的含量

<正>大气中汞的来源主要有自然源和人为源,自然源包括土壤、水体、植被、森林火灾、火山爆发等,人为源包括化石燃料燃烧、金属冶炼、水泥制造等^[1-2]。据统计,全球每年向大气中排放汞的总量为5 000 t, 其中4 000 t来自人为排放。大气中的汞可以通过皮肤和呼吸进入人体,并且对神经系统造成危害^[3]。大气中的汞按照物理化学特性分类,一般可被分为气态元素汞、活性气态汞和颗粒态汞3种形态。     

华北模拟实验块地大气,降水,地表径流和土壤中的稀土浓度分布及施…

通过模拟实验块地，初步了在一个土壤生态系统中稀土的浓度分布以及施用稀土微肥的影响，结果表明：降水、地表径流水溶液中的稀土浓度均为μｇ／Ｌ量级，降水中的稀土主要来源于附近地表土壤。大气中的稀土含量随粒径２有所不同，粒径越小一越低，且其来源主要是附近的水可溶性的硝酸稀土微肥在施用后很快转化为水不溶性形态，施加稀土前后实验组表层土壤中稀土含量基本相同，与对照组相比，施加的稀土微肥对地表径流水溶性和悬浮的     

华北模拟实验块地大气、降水、地表径流和土壤中的稀土浓度分布及施用农用稀土的影响

通过模拟实验块地，初步研究了在一个土壤生态系统中稀土的浓度分布以及施用稀土微肥的影响。结果表明：降水、地表径流水溶液中的稀土浓度均为μｇ／Ｌ量级（０１～１２μｇ／Ｌ），降水中的稀土主要来源于附近地表土壤。大气中的稀土含量随粒径分布有所不同，粒径越小含量越低，且其来源主要是附近的土壤，水可溶性的硝酸稀土微肥在施用后很快转化为水不溶性形态，施加稀土前后实验组表层土壤中稀土含量基本相同。与对照组相比，施加的稀土微肥对地表径流水溶性和悬浮物稀土浓度未产生明显影响。     

Levels, risk assessment and sources of PM10 fraction heavy metals in four types dust from a coal-based city

The concentrations of V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd, Hg and Pb in PM₁₀ fraction of four types of dust in a coal-based city, Fushun were detected by inductively coupled plasma-atomic emission spectroscopy. Results showed that most of the average concentrations for 11 metals in dust were higher than Chinese soil background values, especially for Cu, Zn, Hg, Cd and Pb with higher pollution index values. The re-suspended dust from residential and school building surfaces showed middle and high level of pollution by geoaccumulation index assessment which should raise attention as their potential health risk to local residenter and students. Six hotspots were found from spatial distribution analysis, locating at the northeast corner, central area close to mines, southwest area adjacent to an expressway, northeast area close to power plants, the city center and the industrial district reflecting the influence of agricultural activities, mining activities, vehicle emission, coal combustion and industrial activities. Correlation and principal component analysis showed accordant results indicating that vehicle emission, industrial activities, coal combustion and crustal materials were the main sources for heavy metals in PM₁₀ fraction of fugitive dust in Fushun.     

Studies on the pozzolanic and hydraulic properties of fly ashes in model systems

In this work, the pozzolanic and hydraulic properties of ashes originating from various sources were studied in model systems such as ash and ash-lime pastes. The sources of studied ashes were: fluidized combustion of brown coal, pulverized combustion of brown coal and pulverized combustion of hard coal. This article is a continuation of our previously published studies on cement pastes with mentioned ashes. The following experimental techniques were applied: calorimetry, thermal analysis (TG, DTG) and infrared absorption (IR). Previously drawn conclusions relating to the reactivity of ashes in an environment containing Ca²⁺ ions were confirmed. According to these conclusions, an ash originating from fluidized combustion of coal exhibited higher reactivity compared to other ashes from pulverized combustion. Pozzolanic and hydraulic properties of this ash were also confirmed. Differences in the behaviour of ashes originating from pulverized combustion of various types of coal in the presence of water and Ca²⁺ rich environment were demonstrated.     

生物质与煤混燃灰的比电阻特性实验研究

以玉米秸、麦秸、锯末纯燃并以不同比例与煤混燃,利用DR型高压粉尘比电阻实验台对灰样比电阻R进行测量, 以AAS对灰样化学成分进行分析。结果表明,纯生物质燃料灰R值为10⁸Ω·cm~10¹0Ω·cm,属于中比电阻。混燃灰样的R值均为10⁸Ω·cm~10¹2Ω·cm。麦秸与煤的混燃灰中,掺混率R_t对比电阻R的影响不明显;玉米秸与煤的混燃灰中,在110℃以下,R_t越高,R越低;在110℃以上,R_t越高,R越大。生物质与煤的混燃改变了燃料的燃烧特性及熔融特性,使灰的物理特性和化学成分、含量发生变化,造成混燃灰比电阻与煤灰比电阻的规律存在一定的差异。     

城市灰尘的元素地球化学特征

根据湖州市吴兴区采样数据,分析了城市灰尘元素中亲铁元素、亲铜元素、亲石元素和常量元素的含量和累积状况,并探讨这些元素与土壤背景的关系.结果表明,湖州市城市灰尘四类元素含量差异较大,但与土壤背景变化趋势基本一致;同种元素在不同功能区的富集等级基本相同,但同类元素间存在明显的累积差异;各功能区灰尘元素与土壤背景的关联度都较...     

Source Apportionment of Ambient PM10 in the Urban Area of Longyan City,China: a Comparative Study Based on Chemical Mass Balance Model and Factor Analysis Method

In order to identify the day and night pollution sources of PM10 in ambient air in Longyan City,the authors analyzed the elemental composition of respirable particulate matters in the day and night amb...     

超细粉煤灰吸附亚甲基蓝的机理研究

以西安西郊热电厂粉煤灰(XFA),西安灞桥热电厂粉煤灰(BFA)和陕西渭河电厂粉煤灰(WFA)为原料,球磨后经旋风分级再用布袋收集逸出物分别得到超细粉煤灰XUFA、BUFA和WUFA。研究了超细粉煤灰对亚甲基蓝的吸附动力学、热力学以及pH值对吸附的影响。结果表明,超细粉煤灰对亚甲基蓝的吸附性能明显好于原粉煤灰。超细粉煤灰对亚甲基蓝的吸附性能按顺序为WUFA>XUFA>BUFA。粉煤灰颗粒粒度、比表面积和活性组分(SiO2 Al2O3)含量是影响粉煤灰吸附性能的主要因素。WUFA对亚甲基蓝的吸附符合Langmuir吸附等温式,而XUFA和BUFA对亚甲基蓝的吸附符合Freundlich吸附等温式。超细粉煤灰对亚甲基蓝的吸附均符合二级吸附动力学模型,吸附过程由颗粒内扩散过程控制。当溶液pH由2增加到8时,超细粉煤灰吸附量增加,后随pH值增加,吸附量略有下降。     

Physicochemical profile studies of soil along the banks of Ubu river in Ekwusigo and Nnewi local government areas of Anambra State of Nigeria

A physicochemical profile study on the soil along the banks of the Ubu river that runs across Ekwusigo and Nnewi Local Government Areas (LGA) of Anambra State of Nigeria was investigated for possible evidence of industrial waste disposal by the various large to medium scale industrial activities taking place within the two LGAs. When compared with soil samples from Uzoakwa Ihiala (pH 5.44) with little or no industrial activities, the soil along the banks of the course of the river were found to be more acidic with mean pH values that are lower than 4.7. Similarity in mean sulphate (7.01 mg/kg), phosphate (12.95 mg/kg) and chloride (242 mg/kg) contents was observed between the soils from the banks at Nnewi with those of the Uzoakwa Ihiala that was used as control. This was attributed to contributions from domestic sources rather than from industrial sources, and partly to the similarity of their soil chemistry that may be indigenous to both areas. Electrical conductivity values (55 -74 microS/cm) show that the ionic content of the soil is lower than those of the control (129 microS/cm). This may have been explained by the higher extractible Ca (175.73 mg/kg), K (34.32 mg/kg), and Mg (1.94 mg/kg) recorded for the control. The abundance of the metals extractible from the soils of the river banks follow the sequence Ca>K>Na>Fe. Results for the digested soil samples show that Fe is the most abundant metal in the soil with mean values that are close to 13,000 mg/kg, but is much lower than the mean value of 39,210 mg/kg recorded for the control. Both bank and control samples can be characterized as ferrous. The relative abundance of metal ions observed in the digested soil samples from the river banks follow the sequence Fe>Al>Ca>Na>K>Zn>Cr. Values of 4,565 mg/kg and 300 mg/kg were recorded for total hydrocarbon content and lead respectively for soils around Cento Group, indicating that there were industrial waste disposal or spillages on soil around the area, which was not observed in other areas.     

Are physico-chemical soil characteristics key factors to select the polycyclic aromatic hydrocarbons extraction procedure?

The aim of this work was to assess the impact of soil characteristics and constituents in the total extraction of hydrophobic organic pollutants, such as polycyclic aromatic hydrocarbons (PAH), in real polluted soil samples from different sources. Soil samples were obtained from a wood creosote treatment plant, in the vicinity of a metallurgy industry and coal thermal power stations. Soils showed a wide diversity of textures, organic matter (OM) and CaCO₃ content, pH and electrical conductivity to assure representativeness of multiple situations. Two extraction procedures with soft (solid–liquid extraction, SLE) and intense (pressurised liquid extraction, PLE) extraction power were used to determine the total concentration of PAH in soils. Results obtained showed that soil properties affect the effectiveness of the extraction procedures tested. The validation of PAH extraction procedure with a reference soil did not confirm that the procedure was adequate for all kinds of soil. Results showed that OM content and clay were the main soil characteristics that should be taken into account to select the most adequate PAH extraction procedure for any given polluted soil.     

An environmental pollution study of Indian metropolitan cities and Industrial surroundings by INAA

The process of urbanization and industrialization during las two decades has resulted in increased level of air pollution causing hazards to human health. Instrumental neutron activation analysis (INAA) using short and long term irradiation has been employed for the determination of more than 30 elements in suspended particulate matter (SPM) from six metropolitan cities and three industrial surroundings. A comparison of mean elemental contents in dust particulates from commercial, industrial and residential zones of Delhi, Calcutta, Madras, Cochin, Bombay and Nagpur cities has shown wide variation in toxic pollutant (As, Br, Cr, Cu, Hg and Sb) concentrations. Coastal areas have shown higher concentrations of Na, K, Cl and Br. Highly industrialized Bombay showed highest levels of Br, Cl, Cr, Fe, Mg, P, Rb and Sc. Mean elemental contents in fugitive and ambient dust of a cement factory and thermal power station (both in central India) are widely different. SPM levels in fugitive dust of the two industrial surroundings are higher by an order of magnitude compared to ambient air. Analysis of ambient air dust from a paper mill showed highest concentrations of Hg, Sb and Zn. Elemental data have been compared with those of Urban Particulate Matter (SRM 1648), Coal Fly Ash (SRM 1633a) and Vehicle Exhaust Particulate (NIES No. 8) which were analysed for quality control. An attempt has been made to attribute the elemental contents to possible sources of origin.