TiO2‐assisted Photocatalytic Degradation of Vitamin B12 in Aqueous Solution:Influencing Factors,Kinetics, and Reaction Investigations

The photodegradation (λ=365 nm) of the biomolecule vitamin B₁₂, catalyzed by the photocatalyst TiO₂ nanoparticles (NPs), has been investigated in aqueous suspension. The photodegradation process of vitamin B₁₂ has been monitored by means of electronic absorption (Abs), Fourier‐transform infrared (FT‐IR), and resonance Raman (RR) spectroscopies, respectively. The results show that only under UV illumination in the presence of TiO₂ is there effective degradation, and the photocatalytic degradation of vitamin B₁₂ is strongly influenced by the amount of TiO₂ NPs, the pH, and the initial concentration of vitamin B₁₂. The photocatalytic reaction kinetics of vitamin B₁₂ conforms to a Langmuir‐Hinshelwood isotherm model. Changes involving the three structural units of the carbon‐metal bond C–Co, the organic corrin macrocycle combined with the benzimidazole nucleotide, and the inorganic CN in the vitamin B₁₂ molecule during the photocatalytic degradation are also discussed.     

N‐Doped Yellow TiO2 Hollow Sphere‐Mediated Visible‐Light‐Driven Efficient Esterification of Alcohol and N‐Hydroxyimides to Active Esters

Herein we report a simple synthetic protocol for N‐doped yellow TiO₂ (N‐TiO₂) hollow spheres as an efficient visible‐light‐active photocatalyst using aqueous titanium peroxocarbonate complex (TPCC) solution as precursor and NH₄OH. In the developed strategy, the ammonium ion of TPCC and NH₄OH acts as nitrogen source and structure‐directing agent. The synthesized N‐TiO₂ hollow spheres are capable of promoting the synthesis of active esters of N‐hydroxyimide and alcohol through simultaneous selective oxidation of alcohol to aldehyde followed by cross‐dehydrogenative coupling (CDC) under ambient conditions upon irradiation of visible light. It is possible to develop a novel and cost‐effective one‐pot strategy for the synthesis of important esters and amides on gram scale using the developed strategy. The catalytic activity of N‐TiO₂ hollow spheres is much superior to that of other reported N‐TiO₂ samples as well as TiO₂ with varying morphology.     

An Unexplored O2‐Involved Pathway for the Decarboxylation of Saturated Carboxylic Acids by TiO2 Photocatalysis: An Isotopic Probe Study

The aerobic decarboxylation of saturated carboxylic acids (from C₂ to C₅) in water by TiO₂ photocatalysis was systematically investigated in this work. It was found that the split of C¹? C² bond of the acids to release CO₂ proceeds sequentially (that is, a C₅ acid sequentially forms C₄ products, then C₃ and so forth). As a model reaction, the decarboxylation of propionic acid to produce acetic acid was tracked by using isotopic‐labeled H₂¹⁸O. As much as ≈42 % of oxygen atoms of the produced acetic acids were from dioxygen (¹⁶O₂). Through diffuse reflectance FTIR measurements (DRIFTS), we confirmed that an intermediate pyruvic acid was generated prior to the cut‐off of the initial carboxyl group; this intermediate was evidenced by the appearance of an absorption peak at 1772 cm^?1 (attributed to C?O stretch of α‐keto group of pyruvic acid) and the shift of this peak to 1726 cm^?1 when H₂¹⁶O was replaced by H₂¹⁸O. Consequently, pyruvic acid was chosen as another model molecule to observe how its decarboxylation occurs in H₂¹⁶O under an atmosphere of ¹⁸O₂. With the α‐keto oxygen of pyruvic acid preserved in the carboxyl group of acetic acid, ≈24 % new oxygen atoms of the produced acetic acid were from molecular oxygen at near 100 % conversion of pyruvic acid. The other ≈76 % oxygen atoms were provided by H₂O through hole/OH radical oxidation. In the presence of conduction band electrons, O₂ can independently accomplish such C¹? C² bond cleavage of pyruvic acid to generate acetic acid with ≈100 % selectivity, as confirmed by an electrochemical experiment carried out in the dark. More importantly, the ratio of O₂ participation in decarboxylation increased along with the increase of pyruvic acid conversion, indicating the differences between non‐substituted acids and α‐keto acids. This also suggests that the O₂‐dependent decarboxylation competes with hole/OH‐radical‐promoted decarboxylation and depends on TiO₂ surface defects at which Ti_4c sites are available for the simultaneous coordination of substrates and O₂.     

Production of Hydrogen by Glycerol Photoreforming Using Binary Nitrogen–Metal‐Promoted N‐M‐TiO2 Photocatalysts

The need for renewable energy focuses attention on hydrogen obtained by using sustainable and green methods. The sustainable compound glycerol can be used for hydrogen production by heterogeneous photocatalysis. A novel approach involves the promotion of the TiO₂ photocatalyst with a binary combination of nitrogen and transition metal. We report the synthesis and spectroscopic characterization of the new N‐M‐TiO₂ photocatalysts (M=none, Cr, Co, Ni, Cu), and the photocatalytic reforming of glycerol to hydrogen under ambient conditions and near‐UV or visible light versus benchmark P25 TiO₂. In units of activity μmol m^?2 h^?1, N‐Ni‐TiO₂ is five‐fold more active than P25, and N‐Cu‐TiO₂ is 44‐fold more active. The photocatalytic activity of N‐M‐TiO₂ increases from Cr to Co and Ni, whereas the photoluminescence decreases; the change in activity is due to the modulation of charge recombination.     

Investigation of Electron Behavior in Nano‐TiO2 Photocatalysis by Using In Situ Open‐Circuit Voltage and Photoconductivity Measurements

The in situ open‐circuit voltages (V_oc) and the in situ photoconductivities have been measured to study electron behavior in photocatalysis and its effect on the photocatalytic oxidation of methanol. It was observed that electron injection to the conduction band (CB) of TiO₂ under light illumination during photocatalysis includes two sources: from the valence band (VB) of TiO₂ and from the methanol molecule. The electron injection from methanol to TiO₂ is slower than that directly from the VB, which indicates that the adsorption mode of methanol on the TiO₂ surface can change between dark and illuminated states. The electron injection from methanol to the CB of TiO₂ leads to the upshift of the Fermi level of electrons in TiO₂, which is the thermodynamic driving force of photocatalytic oxidation. It was also found that the charge state of nano‐TiO₂ is continuously changing during photocatalysis as electrons are injected from methanol to TiO₂. Combined with the apparent Langmuir–Hinshelwood kinetic model, the relation between photocatalytic kinetics and electrons in the TiO₂ CB was developed and verified experimentally. The photocatalytic rate constant is the variation of the Fermi level with time, based on which a new method was developed to calculate the photocatalytic kinetic rate constant by monitoring the change of V_oc with time during photocatalysis.     

CO2‐Triggered Switchable Hydrophilicity of a Heterogeneous Conjugated Polymer Photocatalyst for Enhanced Catalytic Activity in Water

Water compatibility for heterogeneous photocatalysts has been pursued for energy and environmental applications. However, there exists a trade‐off between hydrophilicity and recyclability of the photocatalyst. Herein, we report a conjugated polymer photocatalyst with tertiary amine terminals that reversibly binds CO₂ in water, thereby generating switchable hydrophilicity. The CO₂‐assisted hydrophilicity boosted the photocatalytic efficiency in aqueous medium with minimum dosage. When CO₂ was desorbed, the photocatalyst could be simply regenerated from reaction media, facilitating the repeated use of photocatalyst. Hydrophilicity/hydrophobicity control of the polymer photocatalyst was successfully showcased through a variety of organic photoredox reactions under visible‐light irradiation in water.     

Three‐Dimensional Ordered Assembly of Thin‐Shell Au/TiO2 Hollow Nanospheres for Enhanced Visible‐Light‐Driven Photocatalysis

An Au/TiO₂ nanostructure was constructed to obtain a highly efficient visible‐light‐driven photocatalyst. The design was based on a three‐dimensional ordered assembly of thin‐shell Au/TiO₂ hollow nanospheres (Au/TiO₂‐3 DHNSs). The designed photocatalysts exhibit not only a very high surface area but also photonic behavior and multiple light scattering, which significantly enhances visible‐light absorption. Thus Au/TiO₂‐3 DHNSs exhibit a visible‐light‐driven photocatalytic activity that is several times higher than conventional Au/TiO₂ nanopowders.     

Facile Synthesis of Thermal‐ and Photostable Titania with Paramagnetic Oxygen Vacancies for Visible‐Light Photocatalysis

A novel dopant‐free TiO₂ photocatalyst (V_o^.‐TiO₂), which is self‐modified by a large number of paramagnetic (single‐electron‐trapped) oxygen vacancies, was prepared by calcining a mixture of a porous amorphous TiO₂ precursor, imidazole, and hydrochloric acid at elevated temperature (450 °C) in air. Control experiments demonstrate that the porous TiO₂ precursor, imidazole, and hydrochloric acid are all necessary for the formation of V_o^.‐TiO₂. Although the synthesis of V_o^.‐TiO₂ originates from such a multicomponent system, this synthetic approach is facile, controllable, and reproducible. X‐ray diffraction, XPS, and EPR spectroscopy reveal that the V_o^.‐TiO₂ material with a high crystallinity embodies a mass of paramagnetic oxygen vacancies, and is free of other dopant species such as nitrogen and carbon. UV/Vis diffuse‐reflectance spectroscopy and photoelectrochemical measurement demonstrate that V_o^.‐TiO₂ is a stable visible‐light‐responsive material with photogenerated charge separation efficiency higher than N‐TiO₂ and P25 under visible‐light irradiation. The V_o^.‐TiO₂ material exhibits not only satisfactory thermal‐ and photostability, but also superior photocatalytic activity for H₂ evolution (115 μmol h^?1 g^?1) from water with methanol as sacrificial reagent under visible light (λ>400 nm) irradiation. Furthermore, the effects of reaction temperature, ratio of starting materials (imidazole:TiO₂ precursor) and calcination time on the photocatalytic activity and the microstructure of V_o^.‐TiO₂ were elucidated.     

Asymmetric Epoxidation of cis/trans‐β‐Methylstyrene Catalysed by Immobilised Mn(Salen) with Different Linkages: Heterogenisation of Homogeneous Asymmetric Catalysis

Immobilised Mn(salen) catalysts with two different linkages were studied in the asymmetric epoxidation of cis/trans‐β‐methylstyrene using NaClO as oxidant. The immobilised Mn(salen) complexes inside nanopores can lead to different catalytic behaviour compared with that of homogeneous Jacobsen catalyst. The rigidity of the linkage was found to be a key factor affecting the catalytic performance of immobilised catalysts. The immobilised catalyst with a rigid linkage exhibited comparable chemical selectivity, enantioselectivity and cis/trans ratio of product formation to that obtained with homogeneous Jacobsen catalysts. In contrast, the immobilised catalyst with a flexible linkage gave remarkably lower chemical selectivity, enantioselectivity and inverted cis/trans ratio compared with the results obtained with the homogeneous Jacobsen catalyst and the immobilised catalyst with rigid linkage. Thus, for immobilised Mn(salen) catalysts, a rigid linkage connecting active centres to the support is essential to obtain activity and enantioselectivity as high as those obtained in homogeneous systems.     

Mechanistic Features of the TiO2 Heterogeneous Photocatalysis of Arsenic and Uranyl Nitrate in Aqueous Suspensions Studied by the Stopped‐Flow Technique

The dynamics of the transfer of electrons stored in TiO₂ nanoparticles to As^III, As^V, and uranyl nitrate in water was investigated by using the stopped‐flow technique. Suspensions of TiO₂ nanoparticles with stored trapped electrons (e_trap^?) were mixed with solutions of acceptor species to evaluate the reactivity by following the temporal evolution of e_trap^? by the decrease in the absorbance at λ=600 nm. The results indicate that As^V and As^III cannot be reduced by e_trap^? under the reaction conditions. In addition, it was observed that the presence of As^V and As^III strongly modified the reaction rate between O₂ and e_trap^?: an increase in the rate was observed if As^V was present and a decrease in the rate was observed in the presence of As^III. In contrast with the As system, U^VI was observed to react easily with e_trap^? and U^IV formation was observed spectroscopically at λ=650 nm. The possible competence of U^VI and NO₃^? for their reduction by e_trap^? was analyzed. The inhibition of the U^VI photocatalytic reduction by O₂ could be attributed to the fast oxidation of U^V and/or U^IV.