Hypervalent‐Iodine‐Mediated Carbon–Carbon Bond Cleavage and Dearomatization of 9H‐Fluoren‐9‐ols

A transition‐metal‐free synthesis of spiro compounds from 9H‐fluoren‐9‐ols mediated by hypervalent iodine is reported. In this reaction, an unprecedented β‐carbon elimination of tertiary alkoxyliodine(III) to form new diaryliodonium salts is proposed. The obtained phenol intermediates undergo oxidative dearomatization to furnish a class of oxo‐spiro compounds. This domino reaction significantly increases the complexity of these molecules and shows excellent regio‐ and stereoselectivity.     

Recent Advances in Organic Electrochemical C—H Functionalization

Organic electrochemistry has a rich history in organic synthesis and has been considered as a promising alternative to traditional chemical oxidants and reductants because it obviates the use of stoichiometric amount of dangerous and toxic reagents. In particular, the electrochemical C—H bonds functionalization is one of the most desirable approaches for the construction of carbon–carbon (C—C) and carbon–heteroatom (C—X) bonds. This review summarizes the substantial progress made in the last few years in C—H functionalization via organic electrochemistry. It is divided into sections on C—C, C—N, C—O, C—S, C–Halogen and C—P bond formation.     

Can One Assess the π Character of a C–C Bond with the Help of the NMR Spin–Spin Coupling Constants?

Measured one‐bond spin–spin coupling constants (SSCC) ¹J(CC) can be used to describe the nature of the C–C bond, provided one is able to separate the various coupling mechanisms leading to ¹J(CC). The Fermi‐contact (FC) term probes the first‐order density at the positions of the coupling nuclei, whereas the noncontact terms (the paramagnetic spin orbit (PSO) and the spin–dipole (SD) terms) probe the π character of the C–C bond (the diamagnetic spin orbit (DSO) term can mostly be neglected). A model is tested, in which the value of the FC(CC) term is estimated with the help of measured SSCCs ¹J(CH). The difference between the measured J(CC) and the estimated FC(CC) values, Δ(CC)=PSO(CC)+SD(CC)+DSO(CC), provides a semiquantitative measure of the π character of a C–C multiple bond. The applicability and limitations of this approach are discussed by partitioning the four Ramsey terms of the SSCC ¹J(CC) into one‐ and two‐orbital contributions. The FC, PSO, and SD terms of ¹J(CC) are explained and analyzed with regard to their relationship to other C–C bond properties. It is shown that empirical relationships between measured SSCCs and the s character of a bond need reconsideration.     

An Iron Complex with an Unsupported Fe–Fe Bond

Full metal bonding : The reduction of a six‐coordinate, mononuclear Werner‐type iron(II) complex (see scheme) resulted in the isolation of a compound with an extraordinarily rare, unsupported Fe–Fe bond having an experimental Fe–Fe distance of 2.6869(6) Å and a calculated bond order of 0.5.

     

Synthesis of Biaryls through Nickel‐Catalyzed Suzuki–Miyaura Coupling of Amides by Carbon–Nitrogen Bond Cleavage

The first Ni‐catalyzed Suzuki–Miyaura coupling of amides for the synthesis of widely occurring biaryl compounds through N?C amide bond activation is reported. The reaction tolerates a wide range of electron‐withdrawing, electron‐neutral, and electron‐donating substituents on both coupling partners. The reaction constitutes the first example of the Ni‐catalyzed generation of aryl electrophiles from bench‐stable amides with potential applications for a broad range of organometallic reactions.     

Carbon–carbon bond formation between secondary alcohols and aldehydes under ruthenium‐catalyzed redox shuttle

Secondary alcohols are coupled with aldehydes in dioxane in the presence of a catalytic amount of a ruthenium catalyst along with KOH to give coupled ketones or coupled secondary alcohols depending on the molar ratio of secondary alcohols to aldehydes and the presence (or absence) of a sacrificial hydrogen acceptor. Copyright © 2011 John Wiley & Sons, Ltd.     

Transition‐metal‐catalyzed Chelation‐assisted C–H Functionalization of Aromatic Substrates

In the past decade, transition‐metal‐catalyzed C–H activations have been very popular in the research field of organometallic chemistry, and have been considered as efficient and convenient strategies to afford complex natural products, functional advanced materials, fluorescent compounds, and pharmaceutical compounds. In this account, we begin with a brief introduction to the development of transition‐metal‐catalyzed C–H activation, especially the development of transition‐metal‐catalyzed chelation‐assisted C–H activation. Then, a more detailed discussion is directed towards our recent studies on the transition‐metal‐catalyzed chelation‐assisted oxidative C–H/C–H functionalization of aromatic substrates bearing directing functional groups.     

Surface‐Specific Functionalization of Nanoscale Metal–Organic Frameworks

A method for modifying the external surfaces of a series of nanoscale metal–organic frameworks (MOFs) with 1,2‐dioleoyl‐sn‐glycero‐3‐phosphate (DOPA) is presented. A series of zirconium‐based nanoMOFs of the same topology (UiO‐66, UiO‐67, and BUT‐30) were synthesized, isolated as aggregates, and then conjugated with DOPA to create stably dispersed colloids. BET surface area analysis revealed that these structures maintain their porosity after surface functionalization, providing evidence that DOPA functionalization only occurs on the external surface. Additionally, dye‐labeled ligand loading studies revealed that the density of DOPA on the surface of the nanoscale MOF correlates to the density of metal nodes on the surface of each MOF. Importantly, the surface modification strategy described will allow for the general and divergent synthesis and study of a wide variety of nanoscale MOFs as stable colloidal materials.     

Carbon–silica dual‐phase filler,a new‐generation reinforcing agent for rubber. Part VI. Time–temperature superposition of dynamic properties of carbon–silica‐dual‐phase‐filler‐filled vulcanizates

Dynamic properties such as shear modulus, loss modulus, and loss factor were obtained at a low strain amplitude over a wide range of frequencies and temperatures on vulcanizates filled with carbon black, silica, and carbon–silica dual‐phase filler. The data were shifted along the frequency scale. Instead of a single smooth master curve, a pseudomaster curve with a feather‐like structure is obtained. This effect is especially pronounced for the loss factor. Multiple factors may be responsible for this. Among others, filler networking and polymer–filler interaction may play a dominant role. The effect of the carbon–silica dual‐phase filler on the overall dynamic properties of the vulcanizates is similar to that of silica. Their tan δ values are much lower at lower frequencies and are relatively higher at higher frequencies. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1240–1249, 2000     

Total Syntheses of Crinipellins Enabled by Cobalt‐Mediated and Palladium‐Catalyzed Intramolecular Pauson–Khand Reactions

Efficient total syntheses of the naturally occurring, potent antibiotic compounds (?)‐crinipellin A and (?)‐crinipellin B are described. The key advanced intermediate, a fully functionalized tetraquinane core, was constructed by a novel thiourea/palladium‐catalyzed Pauson–Khand reaction. This intermediate can serve as a common intermediate for the collective total synthesis of other members of the crinipellin family.     

Carbon–sulfur chains: A high‐resolution infrared and quantum‐chemical study of C3S and SC7S

In the course of a 5 μm high‐resolution infrared study of laser ablation products from carbon–sulfur targets, the ν₁ vibrational mode region of linear C₃S has been studied continuously from 2046 to 2065 cm^?1. Besides the prominent vibrational fundamental, the region was found to feature the , and even hot bands, the latter two of which were observed for the first time. Owing to the high signal‐to‐noise ratio obtained, the ν₁ mode of S could also be observed in natural abundance for the first time at high spectral resolution in the infrared. At 2061 cm^?1, hidden inside the branch of the C₃S ν₁ fundamental mode, a weak new band is observed which exhibits very tight line spacing and stems from a heavy both carbon and sulfur containing carrier. On the basis of high‐level quantum‐chemical calculations of selected carbon–sulfur chains and other carbon‐rich cumulenes, this feature is attributed to the ν₅ vibrational fundamental of linear SC₇S, which stands for the first gas‐phase spectroscopic detection of this long cumulenic chain.     

可溶过渡金属体系对饱和烃C-H键的活化与官能化

本文综述了饱和烃C-H键活化的新进展以及利用可溶过渡金属多氢化物对饱和烃C-H键进行活化、选择性催化官能化。     

Practical Metal‐Free C(sp3)H Functionalization: Construction of Structurally Diverse α‐Substituted N‐Benzyl and N‐Allyl Carbamates

Described is a practical and universal C? H functionalization of readily removable N‐benzyl and N‐allyl carbamates, with a wide range of nucleophiles at ambient temperature promoted by Ph₃CClO₄. The metal‐free reaction has an excellent functional‐group tolerance, and displays a broad scope with respect to both N‐carbamates and nucleophile partners (a variety of organoboranes and C? H compounds). The synthetic utility in target‐ as well as diversity‐oriented syntheses is demonstrated.     

Ligand Symmetry Modulation for Designing a Mesoporous Metal–Organic Framework: Dual Reactivity to Transition and Lanthanide Metals for Enhanced Functionalization

A promising alternative strategy for designing mesoporous metal–organic frameworks (MOFs) has been proposed, by modifying the symmetry rather than expanding the length of organic linkers. By means of this approach, a unique MOF material based on the target [Zn₈(ad)₄] (ad=adeninate) clusters and C₃‐symmetric organic linkers can be obtained, with trigonal microporous (ca., 0.8 nm) and hexagonal mesoporous (ca., 3.0 nm) 1D channels. Moreover, the resulting 446‐MOF shows distinct reactivity to transition and lanthanide metal ions. Significantly, the transmetalation of Co^II or Ni^II on the Zn^II centers in 446‐MOF can enhance the sorption capacities of CO₂ and CH₄ (16–21 %), whereas the impregnation of Eu^III and Tb^III in the channels of 446‐MOF will result in adjustable light‐emitting behaviors.     

Dual C(sp3)−H Bond Functionalization of N‐Heterocycles through Sequential Visible‐Light Photocatalyzed Dehydrogenation/[2+2] Cycloaddition Reactions

Herein we describe a mild method for the dual C(sp³)?H bond functionalization of saturated nitrogen‐containing heterocycles through a sequential visible‐light photocatalyzed dehydrogenation/[2+2] cycloaddition procedure. As a complementary approach to the well‐established use of iminium ion and α‐amino radical intermediates, the elusive cyclic enamine intermediates were effectively generated by photoredox catalysis under mild conditions and efficiently captured by acetylene esters to form a wide array of bicyclic amino acid derivatives, thus enabling the simultaneous functionalization of two vicinal C(sp³)?H bonds.     

One‐bond 13C–13C coupling constants in alkyl‐substituted cyclopropenes: experimental and theoretical studies

Measurements of one‐bond carbon–carbon coupling constants, ¹J(C, C), were performed for two series of compounds, alkyl‐substituted cyclopropenes and cyclopropanes. The experimental data were complemented by a set of DFT‐calculated J couplings for the parent cyclopropene ( 1 ), its methyl and silyl derivatives and, additionally, for 1‐methylcyclobutene ( 3 ), 1‐methylcyclopentene ( 4 ) and 1‐methylcyclohexene ( 5 ) and good agreement was observed between the experimental and the calculated data; all the trends are perfectly maintained, including a dramatic decrease in the couplings across endocyclic single bonds in cyclopropene and its derivatives, and a significant decrease in the corresponding couplings in cyclobutene. Using the data obtained, the s characters of the carbon hybrid orbitals involved in the formation of the cyclopropene were calculated. The results clearly show that the ring closure and the related strain exerted upon the cyclopropene molecule only slightly disturb the electron structure of the double bond. The s character of the corresponding carbon orbital is 0.314 in cyclopropene vs the theoretical value of 0.333 in ethene. This is at variance with the endo‐ and exocyclic single bonds, where the s characters of the orbitals forming the endocyclic single bonds are much smaller than those of the bonds in the open‐chain compounds, i.e. 0.229 (C‐1 and/or C‐2) and 0.166 (C‐3). The s values calculated for the exocyclic CH bonds are 0.334 for C‐3 and 0.456 for C‐1 and/or C‐2. Copyright © 2002 John Wiley & Sons, Ltd.