Modification of palladium–copper thin film by reduced graphene oxide or platinum as catalyst for Suzuki–Miyaura reactions

This study describes the synthesis of PdCu, PdCu/reduced graphene oxide and PtPdCu nanoparticle thin films via a simple reduction of organometallic precursors including [PtCl₂(cod)] and [PdCl₂(cod)] (cod = cis ,cis ‐1,5‐cyclooctadiene) complexes, in the presence of [Cu(acac)₂] (acac = acetylacetonate) complex at toluene–water interface. The structure and morphology of the thin films were characterized using energy‐dispersive analysis of X‐rays, X‐ray diffraction and transmission electron microscopy techniques. Our studies show that all of these nanoparticles are suitable for the Suzuki–Miyaura coupling (SMC) reaction in water. PtPdCu and PdCu thin films showed higher catalytic activity compared to Pd thin film in the SMC reaction due to the appropriate interaction among palladium, platinum and copper metals.     

Effect of addition of iron on morphology and catalytic activity of PdCu nanoalloy thin film as catalyst in Sonogashira coupling reaction

Palladium‐supported catalysts are complex assemblies with a challenging preparation. Minor changes in their preparation conditions can affect the activity, selectivity and lifetime of these catalysts. PdCuFe nanoparticle (NP) thin films were supported on reduced graphene oxide (RGO) by the reduction of the organometallic complex [PdCl_2‌(cod)] (cod = cis ,cis ‐1,5‐cyclooctadiene), and [Cu(acac)₂] and [Fe(acac)₃] (acac = acetylacetonate) complexes at a toluene–water interface. We have investigated the application of the liquid–liquid interface method for preparing ultrathin films of catalysts and have evaluated the catalytic activity of the prepared NPs for the Sonogashira coupling reaction in micelle media. Also, we have investigated the effect of the addition of iron on the morphology, size and catalytic activity of PdCu/RGO NPs. Our study shows that both of the prepared catalysts (PdCu/RGO and PdCuFe/RGO) are efficient and recoverable catalysts for the Sonogashira carbon–carbon coupling reaction. This method has advantages compared to other routes, such as short reaction times, high to excellent yields, facile and low‐cost method for the preparation of the catalysts, and easy separation and reusability of the catalysts.     

Palladium–cadmium sulfide nanopowder at oil–water interface as an effective catalyst for Suzuki–Miyaura reactions

A simple and effective strategy is described for the synthesis of Pd–CdS nanopowder by the reduction of an organopalladium(II) complex, [PdCl₂(cod)] (cod = cis ,cis ‐1,5‐cyclooctadiene), in the presence of CdS quantum dots (QDs) at a toluene–water interface. We investigated the impact of addition of CdS QDs on catalytic activity of Pd nanoparticles (NPs). The Pd–CdS nanopowder functions as an efficient catalyst for Suzuki–Miyaura reactions for the formation of carbon–carbon bonds. There is a high electron density on Pd NPs and due to their high electron affinity they behave as an electron scavenger from CdS increasing the rate of oxidative addition, which is the rate‐determining step of the catalytic cycle, and, just as we expect, the C─C coupling reaction with the Pd–CdS nanopowder is faster and occurs in less time than that with Pd nanocatalysts. Compared to classical reactions, this method consistently has the advantages of short reaction times, high yields in a green solvent, reusability of the catalyst without considerable loss of catalytic activity and low cost, and is a facile method for the preparation of the catalyst.     

Stereodivergent Synthesis of Arylcyclopropylamines by Sequential CH Borylation and Suzuki–Miyaura Coupling

A step‐economical and stereodivergent synthesis of privileged 2‐arylcyclopropylamines (ACPAs) through a C(sp³)? H borylation and Suzuki–Miyaura coupling sequence has been developed. The iridium‐catalyzed C? H borylation of N‐cyclopropylpivalamide proceeds with cis selectivity. The subsequent B‐cyclopropyl Suzuki–Miyaura coupling catalyzed by [PdCl₂(dppf)]/Ag₂O proceeds with retention of configuration at the carbon center bearing the Bpin group, while epimerization at the nitrogen‐bound carbon atoms of both the starting materials and products is observed under the reaction conditions. This epimerization is, however, suppressed in the presence of O₂. The present new ACPA synthesis results in not only a significant reduction in the steps required for making ACPA derivatives, but also the ability to access either isomer (cis or trans) by simply changing the atmosphere (N₂ or O₂) in the coupling stage.     

Mechanistic Investigation of Catalyst‐Transfer Suzuki–Miyaura Condensation Polymerization of Thiophene–Pyridine Biaryl Monomers with the Aid of Model Reactions

We have investigated the requirements for efficient Pd‐catalyzed Suzuki–Miyaura catalyst‐transfer condensation polymerization (Pd‐CTCP) reactions of 2‐alkoxypropyl‐6‐(5‐bromothiophen‐2‐yl)‐3‐(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)pyridine ( 12 ) as a donor–acceptor (D –A) biaryl monomer. As model reactions, we first carried out the Suzuki–Miyaura coupling reaction of X–Py–Th–X′ (Th=thiophene, Py=pyridine, X, X′=Br or I) 1 with phenylboronic acid ester 2 by using tBu₃PPd⁰ as the catalyst. Monosubstitution with a phenyl group at Th‐I mainly took place in the reaction of Br–Py–Th–I ( 1 b ) with 2 , whereas disubstitution selectively occurred in the reaction of I–Py–Th–Br ( 1 c ) with 2 , indicating that the Pd catalyst is intramolecularly transferred from acceptor Py to donor Th. Therefore, we synthesized monomer 12 by introduction of a boronate moiety and bromine into Py and Th, respectively. However, examination of the relationship between monomer conversion and the M_n of the obtained polymer, as well as the matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) mass spectra, indicated that Suzuki–Miyaura coupling polymerization of 12 with (o‐tolyl)tBu₃PPdBr initiator 13 proceeded in a step‐growth polymerization manner through intermolecular transfer of the Pd catalyst. To understand the discrepancy between the model reactions and polymerization reaction, Suzuki–Miyaura coupling reactions of 1 c with thiopheneboronic acid ester instead of 2 were carried out. This resulted in a decrease of the disubstitution product. Therefore, step‐growth polymerization appears to be due to intermolecular transfer of the Pd catalyst from Th after reductive elimination of the Th‐Pd‐Py complex formed by transmetalation of polymer Th–Br with (Pin)B–Py–Th–Br monomer 12 (Pin=pinacol). Catalysts with similar stabilization energies of metal–arene η²‐coordination for D and A monomers may be needed for CTCP reactions of biaryl D–A monomers.     

Structure–activity relationship of N‐heterocyclic carbene–Pd(II)–imidazole complexes in Suzuki–Miyaura coupling between 4‐methoxyphenyl chloride and phenylboronic acid

A series of N‐heterocyclic carbene–PdCl₂–imidazole [NHC–Pd(II)–Im] complexes were synthesized and the structure of most of them was unambiguously determined by X‐ray single‐crystal diffraction. The structure–activity relationship of these complexes was investigated for the Suzuki–Miyaura coupling between 4‐methoxyphenyl chloride and phenylboronic acid, and the effect of the NHCs and Im moieties were fully discussed. The sterically hindered IPr‐based complex showed the highest catalytic activity. Copyright © 2013 John Wiley & Sons, Ltd.     

Facile synthesis of PtSnZn nanosheet thin film at oil–water interface by use of organometallic complexes: An efficient catalyst for methanol oxidation and p‐nitrophenol reduction reactions

PtSnZn nanosheet thin film with stable and high activity towards methanol electro‐oxidation was synthesized via a simple reduction of organometallic precursors including [PtCl₂(cod)] (cod = cis,cis‐1,5‐cyclooctadiene) and [Sn(CH₃)₄] complexes, in the presence of [Zn(acac)₂] (acac = acetylacetonate) complex at toluene–water interface. Catalytic activities of PtSnZn nanosheets were investigated in the p‐nitrophenol (p‐Nip) reduction and methanol oxidation reactions. The obtained results demonstrate that PtSnZn nanosheets exhibit a good electrocatalytic performance for methanol oxidation reaction, the catalytic activity of the PtSnZn nanosheets being at least 3.5 times higher than that of Pt nanoparticle thin film. Also, the apparent rate constant obtained for p‐Nip reduction with the PtSnZn nanosheets is at least 2.3 times higher than that for Pt nanoparticle thin film due to the appropriate interaction between platinum, tin and zinc metals and geometric properties of PtSnZn nanosheet thin film. Nanosheets are highly favourable for superior catalytic performances due to their geometric properties. A facile and efficient route was used to synthesize trimetallic alloy thin film at oil–water interface.     

Stereocomplementary Synthesis of cis‐ and trans‐2‐(p‐Bromophenyl)‐5‐methylthiazolidin‐4‐ones: Useful Umpolung‐type Suzuki–Miyaura Cross‐coupling Partner and Donor

Novel cis‐ and trans‐2‐(p‐bromophenyl)‐5‐methylthiazolidin‐4‐ones, S,N‐containing heterocyclic compounds, were provided in a cis‐stereocomplementary and trans‐stereocomplementary synthetic manner. cis‐Selective cyclo‐condensation proceeded between 2‐sulfanylpropanoic acid (thiolactic acid) and an imine derived from 4‐bromobenzaldehyde and methylamine, whereas Ti(OiPr)₄ and Ti(OiBu)₄‐promoted trans‐selective cyclo‐condensation proceeded between benzyl 2‐sulfanylpropanoate and the imine. The obtained cis‐ and trans ‐ 2‐(p‐bromophenyl)‐5‐methylthiazolidin‐4‐ones were successfully converted to 2‐(3‐furyl)phenyl derivatives and bis(pinacolato)diborane derivatives utilizing Suzuki–Miyaura and Miyaura–Ishiyama cross‐coupling reactions, respectively, in an umpolung manner.     

Polymerization of graphene oxide nanosheet by using of aminoclay: Electrocatalytic activity of its platinum nanohybrids

This study describes the polymerization of graphene oxide (GO) nanosheet to reduced‐GO‐aminoclay (RGC) by covalent functionalization of chemically reactive epoxy groups on the basal planes of GO with amine groups of magnesium phyllosilicate clay (known as aminoclay). The resulting RGC sheets were characterized and applied to support platinum nanostructures at toluene/water interface. Pt nanoparticles (NPs) with diameters about several nanometers were adhered to RGC sheets by chemical reduction of [PtCl₂(cod)] (cod = cis,cis‐1,5‐cyclooctadiene) complex. Catalytic activity of Pt NPs thin films were investigated in the methanol oxidation reaction. Cyclic voltammetry results exhibit that the Pt/reduced‐GO (RGO) and Pt/RGC thin films showed improved catalytic activity in methanol oxidation reaction in comparison to other Pt NPs thin films, demonstrating that the prepared Pt/RGO and Pt/RGC thin films are promising catalysts for direct methanol fuel cell.     

Syntheses of N10‐substituted 7‐Arylpyrrolo[2,1‐c]‐[1,4]benzodiazepine‐5,11‐diones

Pyrrolo[2,1‐c][1,4]benzodiazepine‐5,11‐dione and its 7‐bromo derivative were alkylated at the N10 atom applying various methods. The resulting products were subjected to Suzuki–Miyaura reactions using a catalyst system consisting of Pd(Cl)₂(PPh₃)₂ and sodium tert‐butanolate in toluene. Results of an X‐ray single crystal analysis are presented.     

The development of phosphinoamine–Pd(II)–imidazole complexes: implications in room‐temperature Suzuki–Miyaura cross‐coupling reaction

The reaction of N‐methylimidazole (N‐MeIm) and N‐butylimidazole (N‐BuIm) with the complexes [PdCl₂(PPh₂py–P,N)] and [PdCl₂(PPh₂Etpy–P,N)] in the presence of NH₄PF₆ under N₂ at room temperature afforded four new cationic Pd(II) complexes [PdCl(PPh₂py–P,N)(N‐MeIm)](PF₆) ( 1 ), [PdCl(PPh₂py–P,N)(N‐BuIm)](PF₆) ( 2 ), [PdCl(PPh₂Etpy–P,N)(N‐MeIm)](PF₆) ( 4 ) and [PdCl(PPh₂Etpy‐P,N)(N‐BuIm)](PF₆) ( 5 ) in good yields, where PPh₂py is 2‐(diphenylphosphino)pyridine and PPh₂Etpy is 2‐{2‐(diphenylphosphino)ethyl}pyridine). The complexes were fully characterized. The catalytic activities of these complexes were investigated for Suzuki–Miyaura cross‐coupling reactions at room temperature. Complex 2 exhibited excellent activity compared to other analogs. Copyright © 2013 John Wiley & Sons, Ltd.     

Cross‐coupling reactions in water using ionic liquid‐based palladium(II)–phosphinite complexes as outstanding catalysts

Two new phosphinite ligands based on ionic liquids [(Ph₂PO)C₇H₁₄N₂Cl]Cl ( 1 ) and [(Cy₂PO)C₇H₁₄N₂Cl]Cl ( 2 ) were synthesized by reaction of 1‐(3‐chloro‐2‐hydoxypropyl)‐3‐methylimidazolium chloride, [C₇H₁₅N₂OCl]Cl, with one equivalent of chlorodiphenylphosphine or chlorodicyclohexylphosphine, respectively, in anhydrous CH₂Cl₂ and under argon atmosphere. The reactions of 1 and 2 with MCl₂(cod) (M = Pd, Pt; cod = 1,5‐cyclooctadiene) yield complexes cis‐[M([(Ph₂PO)C₇H₁₄N₂Cl]Cl)₂Cl₂] and cis‐[M(Cy₂PO)C₇H₁₄N₂Cl]Cl)₂Cl₂], respectively. All complexes were isolated as analytically pure substances and characterized using multi‐nuclear NMR and infrared spectroscopies and elemental analysis. The catalytic activity of palladium complexes based on ionic liquid phosphinite ligands 1 and 2 was investigated in Suzuki cross‐coupling. They show outstanding catalytic activity in coupling of a series of aryl bromides or aryl iodides with phenylboronic acid under the optimized reaction conditions in water. The complexes provide turnover frequencies of 57 600 and 232 800 h^?1 in Suzuki coupling reactions of phenylboronic acid with p‐bromoacetophenone or p‐iodoacetophenone, respectively, which are the highest values ever reported among similar complexes for Suzuki coupling reactions in water as sole solvent in homogeneous catalysis. Furthermore, the palladium complexes were also found to be highly active catalysts in the Heck reaction affording trans‐stilbenes. Copyright © 2014 John Wiley & Sons, Ltd.     

Palladium supported on silica–chitosan hybrid material (Pd‐CS@SiO2) for Suzuki–Miyaura and Mizoroki–Heck cross‐coupling reactions

Palladium supported on silica–chitosan hybrid material was prepared and characterized using thermogravimetric and differential thermogravimetric analyses, scanning electron microscopy, and Fourier transform infrared, energy‐dispersive X‐ray and X‐ray photoelectron spectroscopies. The prepared Pd‐CS@SiO₂ catalyst (1 mol%) was used for the Suzuki–Miyaura cross‐coupling reaction of various aryl halides and arylboronic acids in 95% ethanol at 80 °C and the Mizoroki–Heck reaction in dimethylformamide at 110 °C using K₂CO₃ as a base. The developed catalyst is well suitable for the 3R approach (recoverable, robust, recyclable) for cross‐coupling reactions without appreciable loss of its activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Stereodivergent Synthesis of Arylcyclopropylamines by Sequential C?H Borylation and Suzuki–Miyaura Coupling

A step‐economical and stereodivergent synthesis of privileged 2‐arylcyclopropylamines (ACPAs) through a C(sp³) H borylation and Suzuki–Miyaura coupling sequence has been developed. The iridium‐catalyzed C H borylation of N‐cyclopropylpivalamide proceeds with cis selectivity. The subsequent B‐cyclopropyl Suzuki–Miyaura coupling catalyzed by [PdCl₂(dppf)]/Ag₂O proceeds with retention of configuration at the carbon center bearing the Bpin group, while epimerization at the nitrogen‐bound carbon atoms of both the starting materials and products is observed under the reaction conditions. This epimerization is, however, suppressed in the presence of O₂. The present new ACPA synthesis results in not only a significant reduction in the steps required for making ACPA derivatives, but also the ability to access either isomer (cis or trans) by simply changing the atmosphere (N₂ or O₂) in the coupling stage.     

Synthesis and characterizations of arsine– and stibine–ligated Schiff base palladacycles and their applications in Suzuki–Miyaura cross‐coupling reactions

A series of arsine‐ and stibine‐ligated Schiff base palladacycles were synthesized by the reaction of μ‐Cl‐bridged Schiff base palladacycles [Pd(C₆H₄CH]NC₆H₂R)(μ‐Cl)]₂ (R = 2,4,6‐trimethyl or 2,6‐diisopropyl) with AsPh₃ or SbPh_3. The new arsine‐ and stibine‐ligated palladacycles were fully characterized using ¹H NMR, ¹³C NMR and infrared spectroscopies, high‐resolution mass spectrometry, elemental analysis and single‐crystal X‐ray diffraction. Further exploration of the catalytic application of the palladacycles for Suzuki–Miyaura cross‐coupling reactions of aryl bromides with arylboronic acids was carried out. It was found that the new palladacycles are considerably active for these coupling reactions. Copyright © 2016 John Wiley & Sons, Ltd.     

A highly selective synthesis of 1‐substituted (E)‐buta‐1,3‐dienes with 4,4,5,5‐tetramethyl‐2‐vinyl‐1,3,2‐dioxaborolane as building block

Highly selective synthesis of 1‐substituted (E)‐buta‐1,3‐dienes via palladium‐catalyzed Suzuki–Miyaura cross‐coupling of (E)‐alkenyl iodides with 4,4,5,5‐tetramethyl‐2‐vinyl‐1,3,2‐dioxaborolane ( 1 ) is reported. The vinylboronate pinacol ester ( 1 ) acts as a vinyl building block to show high chemoselectivity for the Suzuki–Miyaura pathway versus Heck coupling in the presence of biphasic conditions (Pd(PPh₃)₄, aqueous K₂CO₃, toluene and ethanol). Copyright © 2014 John Wiley & Sons, Ltd.     

An Electron‐Poor C64 Nanographene by Palladium‐Catalyzed Cascade C−C Bond Formation: One‐Pot Synthesis and Single‐Crystal Structure Analysis

Herein, we report the one‐pot synthesis of an electron‐poor nanographene containing dicarboximide groups at the corners. We efficiently combined palladium‐catalyzed Suzuki–Miyaura cross‐coupling and dehydrohalogenation to synthesize an extended two‐dimensional π‐scaffold of defined size in a single chemical operation starting from N‐(2,6‐diisopropylphenyl)‐4,5‐dibromo‐1,8‐naphthalimide and a tetrasubstituted pyrene boronic acid ester as readily accessible starting materials. The reaction of these precursors under the conditions commonly used for Suzuki–Miyaura cross‐coupling afforded a C₆₄ nanographene through the formation of ten C?C bonds in a one‐pot process. Single‐crystal X‐ray analysis unequivocally confirmed the structure of this unique extended aromatic molecule with a planar geometry. The optical and electrochemical properties of this largest ever synthesized planar electron‐poor nanographene skeleton were also analyzed.     

A simple,quick and novel protocol for biaryl synthesis using LiCl‐promoted in situ‐generated Pd nanoparticles

This paper describes a simple and a very quick protocol for biaryl synthesis using the Suzuki–Miyaura cross‐coupling reaction. A quintessential role of salting‐out agent LiCl was observed in the Suzuki–Miyaura cross‐coupling reaction that enhanced the reduction rate of Pd (II) to a considerable extent, resulting in the formation of nanosized palladium in a few seconds. The isolated Pd nanoparticles were characterized with X‐ray diffraction, dynamic light scattering, TGA, transmission electron microscopy and scanning electron microscopy‐dispersive X‐ray spectroscopy. The Suzuki–Miyaura cross‐coupling reaction proceeded very well with the in situ‐generated Pd nanocatalysts furnishing the desired biaryl adducts with excellent yields.     

Synthesis of 4‐substituted styrene compounds via palladium catalyzed Suzuki–Miyaura reaction using bidentate Schiff base ligands

Air‐stable symmetric Schiff base have been synthesized and proved to be efficient ligands for Suzuki–Miyaura reaction between aryl bromides and arylboronic acids using PdCl₂(CH₃CN)₂ as palladium source under aerobic conditions. The coupling reaction proceeded smoothly using N,N‐bis(anthracen‐9‐ylmethylene)benzene‐1,2‐diamine (L₇) as ligand to provide 4‐substituted styrene compounds in good yields. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,microwave‐promoted catalytic activity in Suzuki–Miyaura cross‐coupling reactions and antimicrobial properties of novel benzimidazole salts bearing trimethylsilyl group

A mixture of benzimidazole salts (2–7), Pd(OAc)₂ and K₂CO₃ in DMF–H₂O catalyzes the Suzuki–Miyaura cross‐coupling reactions promoted by microwave irradiation resulting in high yield within a short time. In particular, the yield of the Suzuki–Miyaura reactions with aryl bromides was found to be nearly quantitative. The synthesized benzimidazole salts (2–7) were identified by ¹H‐¹³C, NMR, IR spectroscopic methods and microanalysis. The molecular structure of 1 was determined by X‐ray crystallography. The antibacterial and antifungal activities of the novel benzimidazole derivatives (1–7) were also tested against standard strains. Copyright © 2011 John Wiley & Sons, Ltd.