Iron‐catalyzed cross‐coupling reaction: Heterogeneous palladium and copper‐free Heck and Sonogashira cross‐coupling reactions catalyzed by a reusable Fe(III) complex

An interesting silica‐supported iron catalyst was successfully prepared and demonstrated as an efficient heterogeneous catalyst for cross‐coupling reactions of aryl halides. The as‐prepared nanocatalyst was well characterized and found to be highly efficient in Heck reaction under mild and sustainable conditions (water as solvent at 80 °C in short reaction time). Furthermore, the obtained catalyst was used as an efficient, inexpensive and green heterogeneous catalyst for Sonogashira cross‐coupling reactions of various aryl iodides and provided the corresponding products with moderate to good yields. This phosphine, copper and palladium‐free catalyst was simply recovered from the reaction mixture and recycled five times without substantial decrease in its catalytic activity.     

Eco‐friendly synthesis of 1,8‐dioxo‐octahydroxanthenes catalyzed by ionic liquid in aqueous media

A biodegradable functionalized ionic liquid 3‐(N,N‐dimethyldodecylammonium)propanesulfonic acid hydrogen sulfate ([DDPA][HSO₄]) was prepared and used as a Brønsted acid–surfactant‐combined catalyst for the eco‐friendly one‐pot synthesis of 1,8‐dioxo‐octahydroxanthenes at 100°C in water. Under these conditions, the reaction of various aromatic aldehydes with dimedone generated 1,8‐dioxo‐octahydroxanthenes in good yields with a simple postreaction procedure. The products could simply be separated from the catalyst/water system, and the catalyst could be reused at least six times without noticeably decreasing the catalytic activity. J. Heterocyclic Chem., (2011).     

Suzuki–Miyaura reactions promoted by a PdCl2/sulfonate‐tagged phenanthroline precatalyst in water

This work reports Suzuki–Miyaura cross‐coupling reactions of arylboronic acid with aryl halide or aryl dibromide mediated by PdCl₂ (0.05 mol%) and sodium 4‐(1H‐imidazo[4,5‐f][1,10]phenanthrolin‐1‐yl)butane‐1‐sulfonate (0.05 mol%) at 100 °C in water. The corresponding cross‐coupling products were obtained in good to excellent yields. The catalytic system was recovered from the organic products by extraction with ether and the residual aqueous catalyst phase showed high activity after reuse of at least four cycles. Copyright © 2014 John Wiley & Sons, Ltd.     

In situ prepared CuI nanoparticles on modified poly(styrene-co-maleic anhydride): an efficient and recyclable catalyst for the azide–alkyne click reaction in water

A facile, high-yielding and straightforward methodology for the copper-catalyzed synthesis of 1,4-disubstituted 1,2,3-triazoles in water, using in situ prepared copper nanoparticles (NPs) on modified poly(styrene-co-maleic anhydride) [SMA] catalyst, is reported. The polymer support was easily prepared from the reaction of SMA with 4-aminopyridine and subsequently underwent reaction with CuI NPs. The catalyst was applied for the preparation of triazoles under air, followed by chromatographic separation of the products. The polymer-supported catalyst not only showed high catalytic activity but also showed high 1,4-regioselectivity for the [3 + 2] Huisgen cycloaddition in water as solvent. The products were obtained in good to excellent yields in all cases. The catalyst can be used without pre-activation and reloaded for at least five runs without significant decrease in its activity. The catalyst was characterized by SEM, energy dispersive spectroscopy analysis of X-rays, and inductively coupled plasma.     

Active palladium catalyst supported by bulky diimine ligand catalyzed Suzuki–Miyaura coupling reaction in water under phosphane‐free and low catalyst loading conditions

A new catalytic system based on palladium and bulky diimine ligand for Suzuki–Miyaura coupling reaction of aryl iodides, bromides and chlorides in neat water is described. The desired biphenyl products were obtained in high to excellent yields for aryl iodides and bromides in the presence of low catalyst loading. Air‐stable catalyst has been recycled for the reaction of iodobenzene with phenylboronic acid for five consecutive runs. Copyright © 2014 John Wiley & Sons, Ltd.     

CuFeO2/tetrabutylammonium bromide catalyzes selective synthesis of 1,4‐disubstituted 1,2,3‐triazoles in neat water at room temperature

A completely green medium including water as a solvent and antiviral CuFeO₂ as a catalyst is described for the synthesis of 1,4‐disubstituted 1,2,3‐triazoles. Excellent yields of products are obtained at room temperature. Cost effectiveness, high stability and high recyclability of CuFeO₂ along with antiviral properties of the catalyst make it a unique catalyst for cycloadditions of phenylacetylene with a wide variety of aryl halides. Copyright © 2016 John Wiley & Sons, Ltd.     

Efficiency of Zn/TiO<Subscript>2</Subscript> catalyst operation in a microchannel reactor in methanol steam reforming

The activity of a Zn/TiO₂ catalyst deposited on metal microchannel plates in methanol steam reforming was studied. The catalyst exhibited maximum activity upon deposition on microchannel plates made of copper foam. In this case, the specific hydrogen production of a microreactor at 450°C was 78.6 l (g Cat)^?1 h^?1. The catalysts deposited on a microchannel plate of nickel foam and on corrugated brass foil exhibited lower activity because of the lower efficiency of heat transfer to the reaction zone. A correlation between the thermal conductivity of the microchannel plate material and the activity of the catalyst was observed in the following order: copper, brass, and nickel. The kinetic parameters of the process of methanol steam reforming in a microreactor were calculated with the use of a plug-flow reactor model. In this case, the calculated formal activation energy of 132 kJ/mol was independent of the microchannel plate material. A comparison of the equilibrium concentrations of reaction products at the reactor outlet, which were calculated from thermodynamic data, with the experimental data demonstrated that methanol steam reforming at a temperature higher than 400°C occurred in the nonequilibrium region. The concentration of carbon monoxide at the microreactor outlet was lower than 1 mol %, which is lower than the equilibrium concentration by one order of magnitude. This effect was attributed to the suppression of the reversed water gas shift reaction on the catalyst.     

Development of kinetic models for acid‐catalyzed methyl acetate formation reaction: Effect of catalyst concentration and water inhibition

The reaction kinetics of reversible liquid‐phase esterification of acetic acid with methanol is investigated in the temperature range 26–50°C using sulfuric acid catalyst. The main goal of this work is to study the effect of catalyst concentration and sensitivity to the presence of water on the rate expression of this industrially important reaction. Experiments are conducted in an isothermal batch reactor and a second‐order kinetic model is used to correlate the experimental data, which are found to fit well with the assumed kinetic model in terms of the concentrations of reactants and products. Furthermore, an activity‐based kinetic model is also developed employing the UNIQUAC (universal quasi‐chemical equation) model to compute the activities. It is observed that the rate constant is influenced by the concentration of catalyst, and the reaction rate increased with an increase in the catalyst concentration. It is also observed that the catalyst activity is slightly inhibited by the water present in the reaction mixture. The performance of the proposed models is compared with that of other models reported in the literature, and it is found that the proposed models outperformed all the other models reported in the literature. © 2011 Wiley Peiodicals, Inc. Int J Chem Kinet 43: 263–277, 2011     

One Pot Synthesis of Octahydroquinazolinone Derivatives Using (Me (Im)<Superscript>12</Superscript>) H<Subscript>4</Subscript>CuPW<Subscript>11</Subscript>O<Subscript>39</Subscript> as a Surfactant Type Catalyst

This study is aimed at proposing a practical green procedure for the synthesis of octahydroquinazolinone derivatives using benzaldehyde, dimedone and urea under microwave irradiation in water. A surfactant type polyoxometalate-based organic–inorganic hybrid was able to efficiently catalyze this synthesis. The catalyst was prepared and characterized by Fourier transform infrared, UV–Vis, X-ray diffraction, and thermogravimetric analysis. The employed catalyst exerted a synergistic effect; the anion part acted as a catalyst while the cation part acted as a surfactant in order to increase the concentration of organic reactants in water. The main advantage of this method is its remarkable yield in short reaction periods, which results in the rendering of products with high purity. Moreover, this heterocatalyst is capable of being easily recovered and reused several times. The influences of reaction conditions were studied systematically, and a possible catalysis mechanism was proposed for understanding the highly efficient heterogeneous catalytic behavior.     

Ultrasound-assisted synthesis of pyrazolo[1,2-<Emphasis Type="Italic">b</Emphasis>]phthalazines and dihydrospiro[indoline-3,1'-pyrazolo[1,2-<Emphasis Type="Italic">b</Emphasis>]phthalazines] using TBAF as an efficient phase-transfer catalyst

Tetrabutylammonim fluoride has been used as an efficient catalyst for synthesis of pyrazolo[1,2-b]-phthalazine-5,10-diones and dihydrospiro[indoline-3,1'-pyrazolo[1,2-b]phthalazines] by one-pot three-component reaction of phthalhydrazide, aromatic aldehydes or isatin derivatives, with malononitrile in water under ultrasond irradiation. This rapid method gave the products in high yield.     

Green Synthesis of 1,2,4,5‐Tetrasubstituted and 2,4,5‐Trisubstituted Imidazole Derivatives Involving One‐pot Multicomponent Reaction

Sodium lauryl sulfate has been found convenient, versatile, and eco‐friendly catalyst for the synthesis of 1,2,4,5‐tetrasubstituted and 2,4,5‐trisubstituted imidazole derivatives by one‐pot multicomponent reactions at 80°C using water as solvent. This protocol afforded advantages, that is, the metal‐free reaction, purification of products by non‐chromatographic method, and excellent yields.     

Nano–silica functionalized with thiol–based dendrimer as a host for gold nanoparticles: An efficient and reusable catalyst for chemoselective oxidation of alcohols

In this paper, we present the synthesis of Au nanoparticles supported on nanosilica thiol based dendrimer, nSTDP. The catalyst was prepared by reduction of HAuCl₄ with NaBH₄ in the presence of nSTDP. The resulting Au_np–nSTDP materials were characterized by FT–IR and UV–vis spectroscopic methods, SEM, TEM, TGA, XPS and ICP analyses. The characterization of the catalyst showed that Au nanoparticles with the size of 2–6 nm are homogeneously distributed on the nSTDP dendrimer with a catalyst loading of about 0.19 mmol/g of catalyst. The Au_np–nSTDP catalyst was used in the oxidation of alcohols with tert–butyl hydroperoxide (TBHP) as oxidant. The influence of vital reaction parameters such as solvent, oxidant and amount of catalyst on the oxidation of alcohols was investigated. These reactions were best performed in an acetonitrile/water mixture (3:2) in the presence of 0.76 mol% of the catalyst on the basis of the Au content at 80 °C under atmospheric pressure of air to afford the desired products in high yields (80–93% for benzyl alcohols). The Au_np–nSTDP catalyst exhibited a high selectivity toward the corresponding aldehyde and ketone (up to 100%). Reusabiliy and stability tests demonstrated that the Au_np–nSTDP catalyst can be recycled with a negligible loss of its activity. Also this catalytic exhibited a good chemoselectivity in the oxidation of alcohols.     

C‐2 Selective Arylation of Indoles with Heterogeneous Nanopalladium and Diaryliodonium Salts

A simple and efficient method to prepare synthetically useful 2‐arylindoles is presented, using a heterogeneous Pd catalyst and diaryliodonium salts in water under mild conditions. A remarkably low leaching of metal catalyst was observed under the applied conditions. The developed protocol is highly C‐2 selective and tolerates structural variations both in the indole and in the diaryliodonium salt. Arylations of both N?H indoles and N‐protected indoles with ortho‐substituted, electron‐rich, electron‐deficient, or halogenated diaryliodonium salts were achieved to give the desired products in high to excellent isolated yields within 6 to 15 h at room temperature or 40 °C.     

Stille cross‐coupling reaction using Pd/BaSO4 as catalyst reservoir

Stille cross‐coupling reactions between iodobenzene and tributylphenyltin were carried out in ethanol/water solution using different amounts of Pd/BaSO₄ as catalyst reservoir in a ligand‐free system and high yields were obtained. Other substituted biaryls were obtained with good yields. The catalyst can be reused up to three times with some loss in activity. Filtration of the catalyst and product extraction yielded a solution that kept its activity, showing the presence of Pd(0)/Pd(II) species that can be regarded as the true catalysts. Interestingly, both 2‐bromotiophene and chlorobenzene yielded the desired corresponding reaction products. Copyright © 2007 John Wiley & Sons, Ltd.     

Sulfonated palladium(II) N‐heterocyclic carbene complex immobilized on nano–micro size poly(4‐vinylpyridinium chloride) for Suzuki‐Miyaura cross‐coupling reaction

The sulfonated palladium(II) N‐heterocyclic carbene complex Pd^II(NHC)SO₃^?, supported on poly(4‐vinylpyridinium chloride), was used as a heterogeneous, recyclable and active catalyst for the Suzuki–Miyaura reaction. This catalyst was applied for coupling of various aryl halides with phenylboronic acid and the corresponding products were obtained in excellent yields and short reaction times. The catalyst was characterized using Fourier transform infrared and diffuse reflectance UV–visible spectroscopies, scanning electron microscopy and elemental analysis. After each reaction, the catalyst was recovered easily by simple filtration and reused several times without significant loss of its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Non‐Thermal Plasma Activation of Gold‐Based Catalysts for Low‐Temperature Water–Gas Shift Catalysis

Non‐thermal plasma activation has been used to enable low‐temperature water‐gas shift over a Au/CeZrO₄ catalyst. The activity obtained was comparable with that attained by heating the catalyst to 180 °C providing an opportunity for the hydrogen production to be obtained under conditions where the thermodynamic limitations are minimal. Using in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), structural changes associated with the gold nanoparticles in the catalyst have been observed which are not found under thermal activation indicating a weakening of the Au−CO bond and a change in the mechanism of deactivation.     

Silica‐bonded S‐sulfonic Acid as a Recyclable Catalyst for Synthesis of 2,3‐Dihydroquinazolin‐4(1H)‐ones

2,3‐Dihydroquinazolin‐4(1H)‐one derivatives were synthesized via a one‐pot, three component reaction of isatoic anhydride and an aromatic aldehyde with ammonium acetate or primary amine catalyzed by silica‐bonded S‐sulfonic acid in ethanol at 80°C. The reaction work‐up is simple and the catalyst is easily separated from the products by filtration. The heterogeneous catalyst was recycled for ten runs upon the condensation reaction of isatoic anhydride and 4‐chlorobenzaldehyde with ammonium acetate without losing its catalytic activity.     

Dichloro‐Bis(aminophosphine) Complexes of Palladium: Highly Convenient,Reliable and Extremely Active Suzuki–Miyaura Catalysts with Excellent Functional Group Tolerance

Dichloro‐bis(aminophosphine) complexes are stable depot forms of palladium nanoparticles and have proved to be excellent Suzuki–Miyaura catalysts. Simple modifications of the ligand (and/or the addition of water to the reaction mixture) have allowed their formation to be controlled. Dichlorobis[1‐(dicyclohexylphosphanyl)piperidine]palladium ( 3 ), the most active catalyst of the investigated systems, is a highly convenient, reliable, and extremely active Suzuki catalyst with excellent functional group tolerance that enables the quantitative coupling of a wide variety of activated, nonactivated, and deactivated and/or sterically hindered functionalized and heterocyclic aryl and benzyl bromides with only a slight excess (1.1–1.2 equiv) of arylboronic acid at 80 °C in the presence of 0.2 mol % of the catalyst in technical grade toluene in flasks open to the air. Conversions of >95 % were generally achieved within only a few minutes. The reaction protocol presented herein is universally applicable. Side‐products have only rarely been detected. The catalytic activities of the aminophosphine‐based systems were found to be dramatically improved compared with their phosphine analogue as a result of significantly faster palladium nanoparticle formation. The decomposition products of the catalysts are dicyclohexylphosphinate, cyclohexylphosphonate, and phosphate, which can easily be separated from the coupling products, a great advantage when compared with non‐water‐soluble phosphine‐based systems.     

Three component reactions of N‐nucleophiles and activated acetylenes with NH‐acids: A facile synthesis in water

A straightforward and efficient method for the synthesis of 1,2‐dihydroisoquinolines via a one‐pot, three‐component reaction of isoquinoline, activated acetylenes, and NH‐acids in water at 70°C without using any catalyst is reported. The method offers several advantages including high yields of products and an easy workup procedure. J. Heterocyclic Chem., (2012).     

CuI/PPh3‐catalyzed Sonogashira coupling reaction of aryl iodides with terminal alkynes in water in the absence of palladium

The Sonogashira cross‐coupling of aryl iodides with terminal alkynes catalyzed by a simple and inexpensive catalyst system of CuI/PPh₃ in water as the sole solvent has been reported. In the presence of CuI/PPh₃, with KOH used as a base, a number of aryl iodides were treated with alkynes to afford the corresponding products in moderate to excellent yields. Copyright © 2008 John Wiley & Sons, Ltd.