Regioselective Conversion of Arenes to N‐aryl‐1,2,3‐triazoles Using CH Borylation

A one‐pot protocol for the synthesis of N‐aryl 1,2,3‐triazoles from arenes by an iridium‐catalyzed C?H borylation/copper catalyzed azidation/click sequence is described. 1 mol % of Cu(OTf)₂ was found to efficiently catalyze both the azidation and the click reaction. The applicability of this method is demonstrated by the late‐stage chemoselective installation of 1,2,3‐triazole moiety into unactivated molecules of pharmaceutical importance.     

Dehydrogenative Carbon–Carbon Bond Formation Using Alkynyloxy Moieties as Hydrogen‐Accepting Directing Groups

In the presence of a catalyst system consisting of Pd(OAc)₂, PCy₃, and Zn(OAc)₂, the reaction of alkynyl aryl ethers with bicycloalkenes, α,ß‐unsaturated esters, or heteroarenes results in the site‐selective cleavage of two C? H bonds followed by the formation of C? C bonds. In all cases, the alkynyloxy group acts as a directing group for the activation of an ortho C? H bond and as a hydrogen acceptor, thus rendering the use of additives such as an oxidant or base unnecessary.     

Modular Synthesis of Phenanthro[9,10‐c]thiophenes by a Sequence of CH Activation,Suzuki Cross‐Coupling and Photocyclization Reactions

A total number of 15 different 3,4‐diarylthiophenes were synthesized, which bear a chlorine atom in ortho‐position of one of the aryl substituents. One aryl group was introduced by an oxidative cross‐coupling reaction, involving a C?H activation at C4(3) of the thiophene core. The other aryl group was in most cases introduced by a Suzuki cross‐coupling reaction, which succeeded the oxidative cross‐coupling step. Photocyclization reactions of the 3,4‐diarylthiophenes were performed in a solvent mixture of benzene and acetonitrile (50:50 v/v) at λ=254 nm and proceeded to the title compounds in yields of 60–82 %. The selectivity of the photocyclization was determined at the ortho‐chloro‐substituted aryl ring by the position of the chlorine substituent. At the other ring, a single regioisomer was observed for phenyl and para‐substituted phenyl groups. For 2‐naphthyl and ortho‐substituted phenyl rings a clear preference was observed in favor of a major regioisomer, while meta‐substitution in the phenyl ring led to a about 1:1 mixture of 5‐ and 7‐substituted phenanthro[9,10‐c]thiophenes. Mechanistically, the photocyclization is likely to occur as a photochemically allowed, conrotatory [(4n+2)π] process accompanied by elimination of HCl. It was shown for two phenanthro[9,10‐c]thiophene products that they can be readily brominated in positions C1 and C3 (74–77 %), which in turn allows for further functionalization at these positions, for example, in the course of halogen–metal exchange and polymerization reactions.     

Copper/Silver‐Mediated Direct ortho‐Ethynylation of Unactivated (Hetero)aryl CH Bonds with Terminal Alkyne

A copper/silver‐mediated oxidative ortho‐ethynylation of unactivated aryl C?H bonds with terminal alkyne has been developed. The reaction uses the removable PIP directing group and features broad substrate scope, high functional‐group tolerance, and compatibility with a wide range of heterocycles, providing an efficient synthesis of aryl alkynes. This procedure highlights the potential of copper catalysts to promote unique, synthetically enabling C?H functionalization reactions that lie outside of the current scope of precious metal catalysis.     

Amine‐Catalyzed Direct Photoarylation of Unactivated Arenes

Constructing biaryls through direct aromatic C? H functionalization of unactivated arenes has become a popular topic in organic chemistry. Many efficient methods have been developed. In this Communication, a direct arylation of unactivated arenes with a broad range of aryl iodides is reported. This reaction proceeds through a new type of amine‐catalyzed single electron transfer initiated radical coupling procedure to form biaryls in high yields under UV irradiation at room temperature. Only 20 mol% of TMEDA is used as the catalyst. No other additives are required for this transformation, thus avoiding the use of toxic transition metal catalysts, strong bases, or large amounts of other organic additives. This greener protocol provides a new strategy to achieve direct aromatic C? H functionalization and offers a new example of cost‐effective and environmentally benign access to biaryls.     

SBA‐15‐functionalized melamine–pyridine group‐supported palladium(0) as an efficient heterogeneous and recyclable nanocatalyst for N‐arylation of indoles through Ullmann‐type coupling reactions

SBA‐15‐functionalized melamine–pyridine group‐supported palladium(0) was found to serve as a heterogeneous and recyclable nanocatalyst for N‐arylation of indoles with aryl iodides under a low catalyst loading (0.3 mol% of Pd) through Ullmann‐type C? N coupling reactions. A variety of aryl iodides could be aminated to provide the N‐arylated products in good to excellent yields without the need of an inert atmosphere. Also, this catalyst was found to be an efficient system for the N‐arylation of other nitrogen‐containing heterocycles with aryl iodides. The heterogeneous palladium catalyst could be recovered by simple filtration of the reaction solution and reused for six cycles without significant loss in its activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Sulfonamide‐Promoted Palladium(II)‐Catalyzed Alkylation of Unactivated Methylene C(sp3)H Bonds with Alkyl Iodides

The alkylation of unactivated β‐methylene C(sp³)? H bonds of α‐amino acid substrates with a broad range of alkyl iodides using Pd(OAc)₂ as the catalyst is described. The addition of NaOCN and 4‐Cl‐C₆H₄SO₂NH₂ was found to be crucial for the success of this transformation. The reaction is compatible with a diverse array of functional groups and proceeds with high diastereoselectivity. Furthermore, various β,β‐hetero‐dialkyl‐ and β‐alkyl‐β‐aryl‐α‐amino acids were prepared by sequential C(sp³)? H functionalization of an alanine‐derived substrate, thus providing a versatile strategy for the stereoselective synthesis of unnatural β‐disubstituted α‐amino acids.     

Palladium 2‐mercapto‐N‐propylacetamide complex anchored onto MCM‐41 as efficient and reusable nanocatalyst for Suzuki,Stille and Heck reactions and amination of aryl halides

A palladium 2‐mercapto‐N‐propylacetamide complex supported on functionalized MCM‐41 was prepared by a post‐grafting method and considered as an efficient catalyst for C? C cross‐coupling reactions between various aryl halides and sodium tetraphenylborate, phenylboronic acid, triphenyltin chloride or alkenes. Also, this catalyst shows good reactivity towards amination of aryl halides. This nanocatalyst was characterized using thermogravimetric analysis, X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, inductively coupled plasma and transmission electron microscopy techniques. Further results indicated that the heterogeneous catalyst could be recovered easily and reused several times without any loss of its catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

PdII‐Catalyzed Mild CH ortho Arylation and Intramolecular Amination Oriented by a Phosphinamide Group

A novel protocol for the Pd‐catalyzed ortho‐arylation of aryl phosphinamide with boronic acid is reported. By using phosphinamide as a new directing group, the reaction proceeds efficiently under mild conditions at 40 °C. Mechanistic studies reveal that the reaction proceeds via a Pd^II to Pd⁰ cycle. The phosphinamide group is also shown to be an effective orienting group for direct C?H amination.     

Unprecedented Transformation of a Directing Group Generated In Situ and Its Application in the One‐Pot Synthesis of 2‐Alkenyl Benzonitriles

An unprecedented protocol for the transformation of benzoyl azides into benzonitrile derivatives via iminophosphoranes generated in situ is described. The strategy was successfully applied to the de‐novo synthesis of 2‐alkenylated benzonitrile derivatives from benzoyl azides through ortho C?H activation/alkenylation followed by subsequent rearrangement. The salient features of this protocol involve incorporation of two important functionalities through cyanation and olefination in one pot under mild reaction conditions by using a less expensive Ru catalyst. The mechanism was established by isolating and characterising (using ³¹P NMR) an intermediate with two ortho functionalities, iminophosphorane and olefin, under specific reaction conditions.     

Rhodium(III)‐Catalyzed [4+1] Annulation of Aromatic and Vinylic Carboxylic Acids with Allenes: An Efficient Method Towards Vinyl‐Substituted Phthalides and 2‐Furanones

A highly regio‐ and stereoselective synthesis of 3,3‐disubstituted phthalides from aryl carboxylic acids and allenes using a rhodium(III) catalyst has been demonstrated. The reaction features broad functional group tolerance and provides a simple and straightforward route to the synthesis of various 3‐vinyl‐substituted phthalides. Furthermore, the catalytic reaction can also be applied to the synthesis of biologically active 5‐vinyl‐substituted 2‐furanones from α,β‐unsaturated carboxylic acids and allenes. The reactions proceed through a carboxylate‐assisted ortho‐C?H activation and [4+1] annulation. The preliminary mechanistic studies suggest that a C?H cleavage is the rate‐determining step.     

Palladium‐Catalyzed Zinc‐Amide‐Mediated CH Arylation of Fluoroarenes and Heteroarenes with Aryl Sulfides

C?H arylation of polyfluoroarenes and heteroarenes with aryl sulfides proceeds smoothly with the aid of a palladium–N‐heterocyclic carbene catalyst. A bulky zinc amide, TMPZnCl ? LiCl, plays a key role as an effective base to generate the corresponding arylzinc species in situ. This arylation protocol is practically much easier to perform than our previous method, which necessitates preparation of the arylzinc reagents in advance from the corresponding aryl halides. Aryl sulfides that are prepared through sulfur‐specific reactions, such as S_NAr sulfanylation and extended Pummerer reactions, undergo this direct arylation, offering interesting transformations that are otherwise difficult to achieve with conventional halogen‐based organic synthesis.     

Oxidative Olefination of Anilides with Unactivated Alkenes Catalyzed by an (Electron‐Deficient η5‐Cyclopentadienyl)Rhodium(III) Complex Under Ambient Conditions

The oxidative olefination of sp² C?H bonds of anilides with both activated and unactivated alkenes using an (electron‐deficient η⁵‐cyclopentadienyl)rhodium(III) complex is reported. In contrast to reactions using this electron‐deficient rhodium(III) catalyst, [Cp*RhCl₂]₂ showed no activity against olefination with unactivated alkenes. In addition, the deuterium kinetic isotope effect (DKIE) study revealed that the C?H bond cleavage step is thought to be the turnover‐limiting step.     

Stereoselective Synthesis of 1,3‐Diaminotruxillic Acid Derivatives: An Advantageous Combination of CH‐ortho‐Palladation and On‐Flow [2+2]‐Photocycloaddition in Microreactors

The stereoselective synthesis of ε‐isomers of dimethyl esters of 1,3‐diaminotruxillic acid in three steps is reported. The first step is the ortho‐palladation of (Z)‐2‐aryl‐4‐aryliden‐5(4H)‐oxazolones 1 to give dinuclear complexes 2 with bridging carboxylates. The reaction occurs through regioselective activation of the ortho‐C?H bond of the 4‐arylidene ring in carboxylic acids. The second step is the [2+2]‐photocycloaddition of the C?C exocyclic bonds of the oxazolone skeleton in 2 to afford the corresponding dinuclear ortho‐palladated cyclobutanes 3 . This key step was performed very efficiently by using LED light sources with different wavelengths (465, 525 or 625 nm) in flow microreactors. The final step involved the depalladation of 3 by hydrogenation in methanol to afford the ε‐1,3‐diaminotruxillic acid derivatives as single isomers.     

Room‐Temperature ortho‐Alkoxylation and ‐Halogenation of N‐Tosylbenzamides by Using Palladium(II)‐Catalyzed CH Activation

The N‐tosylcarboxamide group can direct the room‐temperature palladium‐catalyzed C?H alkoxylation and halogenation of substituted arenes in a simple and mild procedure. The room‐temperature stoichiometric cyclopalladation of N‐tosylbenzamide was first studied, and the ability of the palladacycle to react with oxidants to form C?X and C?O bonds under mild conditions was demonstrated. The reaction conditions were then adapted to promote room‐temperature ortho‐alkoxylations and ortho‐halogenations of N‐tosylbenzamides using palladium as catalyst. The scope and limitation of both alkoxylations and halogenations was studied and the subsequent functional transformation of the N‐tosylcarboxamide group through nucleophilic additions was evaluated. This methodology offers a simple and mild route to diversely functionalized arenes.     

Sequential Ugi Four‐Component Reaction (4‐CR)/CH Activation Using (Diacetoxyiodo)benzene for the Synthesis of 3‐(Diphenylmethylidene)‐2,3‐dihydro‐1H‐indol‐2‐ones

A sequential Ugi four‐component reaction (4‐CR)/C? H activation using (diacetoxyiodo)benzene is reported. This process is a five‐component reaction of aromatic aldehydes, aniline derivatives, isocyanides, phenylpropiolic acid (3‐phenylprop‐2‐ynoic acid), and (diacetoxyiodo)benzene for the synthesis of 3‐(diphenylmethylidene)‐2,3‐dihydro‐1H‐indol‐2‐ones. This procedure offers several advantages such as good yields, high bond‐forming efficiency, selectivity, and short reaction times.     

Palladium‐Catalyzed Carbonylative [3+2+1] Annulation of N‐Aryl‐Pyridine‐2‐Amines with Internal Alkynes by CH Activation: Facile Synthesis of 2‐Quinolinones

We describe here a novel procedure for the synthesis of highly substituted 2‐quinolinones. By this newly developed approach, 2‐quinolinone derivatives were prepared in moderate to good yields by carbonylative cyclization of N‐aryl‐pyridine‐2‐amines and internal alkynes by C?H activation. Remarkably, [Mo(CO)₆] was applied as a solid CO source and the reaction proceeded in an atom economic manner.     

Mechanistic Study on Rh‐Catalyzed Stereoselective CC/CH Activation of tert‐Cyclobutanols

A mechanistic study was performed on the Rh‐catalyzed stereoselective C?C/C?H activation of tert‐cyclobutanols. The present study corroborated the previous proposal that the reaction occurs by metalation, β‐C elimination, 1,4‐Rh transfer, C?O insertion, and a final catalyst‐regeneration step. The rate‐determining step was found to be the 1,4‐Rh transfer step, whereas the stereoselectivity‐determining step did not correspond to any of the aforementioned steps. It was found that both the thermodynamic stability of the product of the β‐C elimination and the kinetic feasibility of the 1,4‐Rh transfer and C?O insertion steps made important contributions. In other words, three steps (i.e., β‐C elimination, 1,4‐Rh transfer, and C?O insertion) were found to be important in determining the configurations of the two quaternary stereocenters.     

Palladium‐Catalyzed Arylation of Unactivated γ‐Methylene C(sp3)H and δ‐CH Bonds with an Oxazoline‐Carboxylate Auxiliary

A palladium‐catalyzed arylation of unactivated γ‐methylene C(sp³)?H and remote δ‐C?H bonds by using an oxazoline‐carboxylate directing group has been developed. Arylation occurs with a broad substrate scope and high tolerance of functional groups (i.e., halogen, nitro, cyano, ether, trifluoromethyl, amine, and ester). The oxazoline‐type auxiliary can be removed under acidic conditions.     

Copper‐Promoted Site‐Selective Acyloxylation of Unactivated C(sp3)H Bonds

The site‐selective acyloxylation of aliphatic amides was achieved via a copper‐promoted C(sp³)? H bond functionalization process directed by a bidentate ligand. The reaction showed a great preference for activating C? H bonds of β‐methyl groups over those of γ‐methyl and unactivated methylene groups.