A Simple Synthesis of Polyfunctionalized 4‐Aminopyrazolidin‐3‐ones as ‘Aza‐deoxa’ Analogs of D‐Cycloserine

A simple five‐step synthesis of fully substituted (4RS,5RS)‐4‐aminopyrazolidin‐3‐ones as analogs of D ‐cycloserine was developed. It comprises a two‐step preparation of 5‐substituted (4RS,5RS)‐4‐(benzyloxycarbonylamino)pyrazolidin‐3‐ones, reductive alkylation at N(1), alkylation of the amidic N(2) with alkyl halides, and simultaneous hydrogenolytic deprotection/reductive alkylation of the primary NH₂ group. The synthesis enables an easy stepwise functionalization of the pyrazolidin‐3‐one core with only two types of common reagents, aldehydes (or ketones) and alkyl halides. The structures of products were elucidated by NMR spectroscopy and X‐ray diffraction.     

Synthesis of 2,N,N‐Trisubstituted 1H‐Indole‐1‐carbothioamides from 2‐(Acylmethyl)phenyl Isocyanides

A convenient procedure for the synthesis of 2,N,N‐trisubstituted 1H‐indole‐1‐carbothioamides from 2‐(acylmethyl)phenyl isocyanides has been developed. Thus, these isocyanides are converted into (Z)‐ [1‐alkyl (or phenyl)‐2‐(2‐isothiocyanatophenyl)ethenyl] 1,1‐dimethylethyl carbonates via an easy two‐step sequence. Treatment with secondary amines gave thiourea intermediates which afforded with CF₃COOH (TFA) the desired products in fair‐to‐good yields.     

Using Calcium Carbide as an Acetylene Source for Cascade Synthesis of Pyrrolo[2,3‐b]quinoxalines via Copper‐Free Sonogashira Coupling Reaction

A palladium‐catalyzed cascade protocol has been established for the synthesis of 4‐methyl‐1‐(1H‐pyrrolo[2,3‐b]‐quinoxalin‐2‐yl)cyclohexanols and 2‐phenyl‐1‐(1H‐pyrrolo[2,3‐b]quinoxalin‐2‐yl)propan‐1‐ols through the reaction of N‐alkyl(aryl)‐3‐chloroquinoxalin‐2‐amines with calcium carbide and cyclohexanones or 2‐phenylpropanal. This one‐pot process, carried out without any copper salt in the key step of the Sonogashira coupling reaction, provides an efficient method for the synthesis of 2,3‐disubstituted pyrrolo[2,3‐b]quinoxalines in the presence of catalytic amounts of Pd(PPh₃)₂Cl₂ in DMSO/H₂O with high yields. The benefit of this strategy is the use of a commercially available, inexpensive, and less hazardous primary chemical feedstock, calcium carbide, as an acetylene source in a wet solvent.     

New Pyrazolyl‐Nicotinic Acids,Methyl Esters,and 1,3,4‐Oxadiazolyl‐pyrazolyl‐pyridine Tricyclic Scaffold Derivatives from 6‐Hydrazinylnicotinic Acid Hydrazide Hydrate

This paper describes an efficient approach for the synthesis of a new series of 6‐[3‐alkyl(aryl/heteroaryl)‐5‐trifluoromethyl‐1H‐pyrazol‐1‐yl]nicotinic acids (where alkyl = CH₃; aryl = Ph, 4‐OCH₃Ph, 4,4′‐BiPh; and heteroaryl = 2‐Furyl) from the hydrolysis reaction of alkyl(aryl/heteroaryl)substituted 2‐(5‐trifluoromethyl‐5‐hydroxy‐4,5‐dihydro‐1H‐pyrazol‐1‐yl)‐5‐(5‐trifluoromethyl‐5‐hydroxy‐4,5‐dihydro‐1H‐1‐carbonylpyrazol‐1‐yl)pyridines, under basic conditions and at 70–95% yields. In a subsequent step, the esterification reaction of pyrazolyl‐nicotinic acids done in thionyl chloride and methanol led to the isolation of a series of methyl 6‐[alkyl(aryl/heteroaryl)‐5‐trifluoromethyl‐1H‐pyrazol‐1‐yl] nicotinates as stable hydrochloride salts at 64–84% yields, which could be easily converted to hydrazides to give new oxadiazolyl‐pyrazolyl‐pyridine tricyclic scaffolds at good yields from a [4 + 1] cyclocondensation reaction with 1,1,1‐triethoxyethane and 1‐(triethoxymethyl)benzene as the reagent/solvent.     

Three‐Step Synthesis of 3‐Aryl‐2‐sulfanylthieno[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridines from the Corresponding Aryl(halopyridinyl)methanones

A convenient three‐step procedure for the synthesis of three types of 3‐aryl‐2‐sulfanylthienopyridines 4, 8 , and 12 has been developed. The first step of the synthesis of thieno[2,3‐b]pyridine derivatives 4 is the replacement of the halo with a (sulfanylmethyl)sulfanyl group in aryl(2‐halopyridin‐3‐yl)methanones 1 by successive treatment with Na₂S?9 H₂O and chloromethyl sulfides to give aryl{2‐[(sulfanylmethyl)sulfanyl]pyridin‐3‐yl}methanones 2 . In the second step, these were treated with LDA (LiNⁱPr₂) to give 3‐aryl‐2,3‐dihydro‐2‐sulfanylthieno[2,3‐b]pyridin‐3‐ols 3 , which were dehydrated in the last step with SOCl₂ in the presence of pyridine to give the desired products. Similarly, thieno[2,3‐c]pyridine and thieno[3,2‐c]pyridine derivatives, 8 and 12 , respectively, can be prepared from aryl(3‐chloropyridin‐4‐yl)methanones 5 and aryl(4‐chloropyridin‐3‐yl)methanones 9 , respectively.     

Base‐Dependent Stereodivergent Intramolecular Aza‐Michael Reaction: Asymmetric Synthesis of 1,3‐Disubstituted Isoindolines

The nucleophilic addition (A_N) / intramolecular aza‐Michael reaction (IMAMR) process on Ellman’s tert‐butylsulfinyl imines, bearing a Michael acceptor in the ortho position, is studied. This reaction affords 1,3‐disubstituted isoindolines with a wide range of substituents in good yields and diastereoselectivities. Interestingly, careful choice of the base for the aza‐Michael step allows either the cis or the trans diastereoisomers to be exclusively obtained. This stereodivergent cyclization has enabled the synthesis of C₂‐symmetric bisacetate‐substituted isoindolines. In addition, bisacetate isoindolines bearing two well‐differentiated ester moieties are also noteworthy because they may allow for the orthogonal synthesis of β,β′‐dipeptides using a single nitrogen atom as a linchpin.     

Synthesis of (1α)‐1,25‐Dihydroxyvitamin D3 with a β‐Positioned Seven‐Carbon Side Chain at C(12)

A convergent synthesis of an analogue of (1α)‐1,25‐dihydroxyvitamin D₃ ( 1b ) with a C₇ side chain at C(12), i.e., of 5 (Fig.), is described. A key step of the synthesis is the assembly of the triene system by a Pd^II‐catalyzed ring closure of an enol triflate (‘bottom’ fragment) followed by coupling of the resulting Pd^II intermediate with an alkenylboronate (‘upper’ fragment) (Scheme 2). The synthetic strategy allows isotopic labelling at the end of the synthesis.     

2,3,7,8,12,13‐Hexaaryltruxenes: An ortho‐Substituted Multiarm Design and Microwave‐Accelerated Synthesis toward Starburst Macromolecular Materials with Well‐Defined π Delocalization

We present herein a novel design and the efficient synthesis towards a “homogeneous” starburst fluorene system based on the novel 2,3,7,8,12,13‐hexaaryltruxene scaffold. Controlled microwave heating provides a facile and powerful approach for each step in the synthesis of these bulky materials with large steric hindrance, suggesting an avenue to access structurally well‐defined complex organic semiconductors (OSCs) rapidly and conveniently with high yield and purity. The resulting materials exhibited good thermal stability and an excellent glassy structure as revealed by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) as well as wide‐angle X‐ray diffraction (WAXD) studies. Moreover, compared with their corresponding three‐arm‐substituted counterparts T1 – T4 , the introduction of the ortho substituents around the truxene core in Tr1 – Tr4 results in significant blueshifts (of 7–24 nm) of the absorption maxima λ_max and higher energy optical gaps (E_g). Comparative studies with corresponding linear, rod‐shaped oligofluorene counterparts (OFX) have revealed that the longest para‐conjugated segment in the TrX (X=1–4) structures plays the dominant role in determining their electronic properties. UV/Vis data and cyclic voltammetry (CV) investigations have indicated that there is little electronic interaction between the arms, even for the shortest armed oligomer Tr1 . A clear linear relationship of both 1/λ_max and E_g with the inverse of (n+1) for these branched systems was found. Our findings highlight a novel molecular design comprising an ortho‐substituted, multiarmed architecture that would allow the introduction of isotropic physical and/or mechanical properties, while at the same time maintaining most of the important electronic properties of the rod‐shaped constituents of a fully conjugated system.     

Junction‐Controlled Topological Polymerization

Methodology that enables the controlled synthesis of linear and branched polymers from an identical monomer will be a novel pathway for polymer synthesis and processing. Herein we first describe the control of one or both of the C(3)‐C(3′) and C(6)‐C(6′) coupling reactions of carbazolyl. In a second approach, an identical monomer containing two carbazolyls is polymerized using chemical and electrochemical oxidizers, leading to topologically controllable growth of linear polymers in weak oxidizer or of cross‐linked polymer chains in strong oxidizer, with satisfactory long chain propagation of step growth polymerization (M_n=6.0×10⁴ g mol^?1, M_w/M_n=2.3). This very simple polymerization with cheap reagents and low levels of waste has provided a flexible pathway for synthesis and processing of polymers.     

Novel π2s+π2a Electrocyclization of Triethylenic‐Malonic Acids Exemplified for a One‐Pot Synthesis of New γ‐Dilactones cis‐Fused with a Cyclopentene

A new, easy and rapid synthesis of γ‐dilactones is cis‐fused with a cyclopentenic ring via cyclization of 7‐chlorotriethylenic‐malonic acids. The key step implicates an intramolecular cyclization to a cyclopentenyl cation, according to an electrocyclic π_2s + π_2a conrotatory process. This cyclopentenyl cation led to unstable γ‐lactones intermediates that are rearrange to more stable isomers. δ‐lactones (6Z and 6E‐(3‐chlorobut‐2‐en‐2‐yl)‐5‐methyl‐3,6‐dihydro‐2H‐pyran‐2‐one) were obtained as secondary products. Mechanistic pathways were considered. The structures of the newly synthesized compounds were established by elemental and spectral data.     

Catalyst‐ and solvent‐free synthesis of 2‐fluoro‐N‐(3‐methylsulfanyl‐1H‐1,2,4‐triazol‐5‐yl)benzamide through a microwave‐assisted Fries rearrangement: X‐ray structural and theoretical studies

An efficient approach for the regioselective synthesis of (5‐amino‐3‐methylsulfanyl‐1H‐1,2,4‐triazol‐1‐yl)(2‐fluorophenyl)methanone, C₁₀H₉FN₄OS, (3), from the N‐acylation of 3‐amino‐5‐methylsulfanyl‐1H‐1,2,4‐triazole, (1), with 2‐fluorobenzoyl chloride has been developed. Heterocyclic amide (3) was used successfully as a strategic intermediate for the preparation of 2‐fluoro‐N‐(3‐methylsulfanyl‐1H‐1,2,4‐triazol‐5‐yl)benzamide, C₁₀H₉FN₄OS, (4), through a microwave‐assisted Fries rearrangement under catalyst‐ and solvent‐free conditions. Theoretical studies of the prototropy process of (1) and the Fries rearrangement of (3) to provide (4), involving the formation of an intimate ion pair as the key step, were carried out by density functional theory (DFT) calculations. The crystallographic analysis of the intermolecular interactions and the energy frameworks based on the effects of the different molecular conformations of (3) and (4) are described.     

A Facile Synthesis of 1‐Substituted 3‐Alkoxy‐1H‐isoindoles Based on the Reaction of 2‐(Dialkoxymethyl)phenyllithiums with Nitriles,Followed by Acid‐Catalyzed Cyclization

A two‐step synthesis of 1‐substituted 3‐alkoxy‐1H‐isoindoles 4 has been developed. Thus, the reaction of 2‐(dialkoxymethyl)phenyllithium compounds, which are easily generated in situ by Br/Li exchange between 1‐bromo‐2‐(dialkoxymethyl)benzenes 1 and BuLi in THF at ?78°, with nitriles afforded [2‐(dialkoxymethyl)phenyl]methanimines 2 , which were treated with a catalytic amount of TsOH?H₂O in refluxing CHCl₃ to give the desired products in reasonable yields. Similarly, 3‐aryl‐1‐ethoxy‐1‐methyl‐1H‐isoindoles 7 have been prepared starting from 1‐bromo‐2‐(1,1‐diethoxyethyl)benzenes 5 .     

Potent E‐Selectin Antagonists

In the search for drugs that could control excessive leukocyte extravasation, we now report on modifications of the already known potent E‐selectin antagonist 3 containing a cyclohexyllactic acid residue and a glucal‐derived building block. Thus, we describe the synthesis and biological evaluation of a series of derivatives 6 with modified glucal‐derived moieties (CH₂NR¹R² instead of CH₂OH in 3 ) to explore a hypothetical potential complementary interaction with E‐selectin. However, similar activity profiles of most derivatives 6 and compound 3 do not support such an interaction, but rather indicate topological‐structure changes of 6 (and 3 ) in the orientation of the neighboring fucose and galactose due to intramolecular steric interactions. The most potent E‐selectin antagonist 6v showed >50‐fold improved E‐selectin inhibition compared to the weak selectin ligand sialyl Lewis^x (sLe^x, 1 ; IC₅₀=1000 – 1500 μM ), but only a 2‐fold improvement compared to 3 . Compound 6x was tested in vivo in a murine model of acute inflammation and found to be as potent as 3 (ED₅₀=15 mg/kg).     

Synthesis and Characterization of New Thebaine Derivatives as Potential Opioid Agonists and Antagonists: 2‐[N‐(1H‐Tetrazol‐5‐yl)‐6,14‐endo‐etheno‐6,7,8,14‐tetrahydrothebaine‐7α‐yl]‐5‐phenyl‐1,3,4‐oxadiazoles

In this study, we report the synthesis a series of novel 2‐[N‐(1H‐tetrazol‐5‐yl)‐6,14‐endo‐etheno‐6,7,8,14‐tetrahydrothebaine‐7α‐yl]‐5‐phenyl‐1,3,4‐oxadiazole derivatives ( 7a – e ) which have potential opioid antagonist and agonist. The substitution reaction of 6,14‐endo‐ethenotetrahydrothebaine‐7α‐carbohydrazide with corresponding benzoyl chlorides gave diacylhydrazine compounds 4a – e in good yields. The treatment of compounds 4a – e with POCl₃ caused the conversion of side‐chain of compounds 5a – e into 1,3,4‐oxadiazole ring at C(7) position; thus, compounds 5a – e were obtained. Subsequently, cyanamides ( 6a – e ) were prepared from compounds 5a – e and then compounds 7a – e were synthesized by the azidation of 6a – e with NaN₃. The structures of the compounds were established on the basis of their IR, ¹H NMR, ¹³C APT, 2D‐NMR (COSY, NOESY, HMQC, HMBC) and high‐resolution mass spectral data.     

One‐Pot Synthesis of Pyrrolo[1,2‐a]quinolin‐1‐ones by the Cyclocondensation of 5‐Hydroxy‐1‐arylpyrrolidin‐2‐ones with Dicarbonyls

A one‐pot synthesis of pyrrolo[1,2‐a]quinolin‐1‐ones has been developed from the reactions of 5‐hydroxy‐1‐arylpyrrolidin‐2‐ones with 1,3‐dicarbonyl compounds under the promotion of H₃PO₄/P₂O₅ or HOAc/H₂SO₄. The pyrrolo[1,2‐a]quinolin‐1‐ones are formed by two‐step reactions, that is, the coupling of N‐acyliminium ion intermediates produced from 5‐hydroxy‐1‐arylpyrrolidin‐2‐ones with 1,3‐dicarbonyls and subsequent Friedel–Crafts reactions of the resulting ketone with the aryl ring.     

A Novel Asymmetric Synthesis of 3‐(1H‐Pyrrol‐1‐yl)‐Substituted β‐Lactams via a Bismuth Nitrate‐Catalyzed Reaction

The reaction of racemic α‐keto β‐lactams 5a – 5c with the commercially available chiral compound trans‐4‐hydroxy‐L ‐proline ( 6 ) in the presence of a catalytic amount of Bi(NO₃)₃?5 H₂O in EtOH gave a diastereoisomer mixture of β‐lactams with a pyrrole ring at C(3) ( 7 to 12 ). This is the first enantioselective synthesis of optically active β‐lactams (=azetidin‐2‐ones) that possess a pyrrolyl residue at C(3), in a single step.     

Ein neuer Zugang zu 2′‐O‐(2‐Methoxyethyl)ribonucleosiden ausgehend von D‐Glucose

A New Access to 2′‐ O ‐(2‐Methoxyethyl)ribonucleosides Starting from D ‐Glucose A new synthesis of 2′‐O‐(2‐methoxyethyl)ribonucleosides, building blocks for second‐generation antisense oligonucleotides, starting from D ‐glucose is presented. The key‐step is the transformation of 3‐O‐methoxyethylallofuranose to 2‐O‐(2‐methoxyethyl)ribose by NaIO₄ oxidation. Together with the 4′‐phenylbenzoyl protecting group, which results in crystalline intermediates, this synthesis provides an easy and cheap access to 2′‐O‐(2‐methoxyethyl)‐substituted ribonucleosides.     

Pd‐Catalyzed Selective Carbonylation of gem‐Difluoroalkenes: A Practical Synthesis of Difluoromethylated Esters

The first catalyst for the alkoxycarbonylation of gem‐difluoroalkenes is described. This novel catalytic transformation proceeds in the presence of Pd(acac)₂/1,2‐bis((di‐tert‐butylphosphan‐yl)methyl)benzene (btbpx) ( L4 ) and allows for an efficient and straightforward access to a range of difluoromethylated esters in high yields and regioselectivities. The synthetic utility of the protocol is showcased in the practical synthesis of a Cyclandelate analogue using this methodology as the key step.     

Reliable Chemical Synthesis of Oligoribonucleotides (RNA) with 2′‐O‐[(Triisopropylsilyl)oxy]methyl(2′‐O‐tom)‐Protected Phosphoramidites

A method for the introduction of the 2′‐O‐[(triisopropylsilyl)oxy]methyl (=tom) group into N‐acetylated, 5′‐O‐dimethoxytritylated ribonucleosides is presented. The corresponding 2′‐O‐tom‐protected phosphoramidite building blocks were obtained in pure form and were successfully employed for the routine synthesis of oligoribonucleotides on DNA synthesizers. Under DNA coupling conditions (2.5 min coupling time for a 1.5‐μmol synthesis scale) and with 5‐(benzylthio)‐1H‐tetrazole (BTT) as activator, 2′‐O‐tom‐protected phosphoramidites exhibited average coupling yields >99.4%. The combination of N‐acetyl and 2′‐O‐tom protecting groups allowed a reliable and complete two‐step deprotection, first with MeNH₂ in EtOH/H₂O and then with Bu₄NF in THF, without concomitant destruction of the product RNA sequences.     

Synthesis of alkyl 6‐methyl‐4‐(2‐pyridyl)‐1,2,3,4‐tetrahydro‐2H‐pyrimidine‐2‐one‐5‐carboxylates for evaluation as calcium channel antagonists

The Bigenelli acid catalyzed condensation of 2‐pyridylcarboxaldehyde ( 1 ), urea ( 2 ) and an alkyl acetoacetate ( 3 ) afforded the respective alkyl (Me, Et, i‐Pr, i‐Bu, t‐Bu) 6‐methyl‐4‐(2‐pyridyl)‐1,2,3,4‐tetrahydro‐2H‐pyrimidine‐2‐one‐5‐carboxylates ( 4a‐e ). The most potent calcium channel antagonist ethyl 6‐methyl‐4‐(2‐pyridyl)‐1,2,3,4‐tetrahydro‐2H‐pyrimidine‐2‐one‐5‐carboxylate ( 4b , IC₅₀ = 1.67 × 10^?5 M) wasa much weaker calcium channel antagonist than the reference drug nifedipine (Adalat®, IC₅₀ = 1.40 × 10^?8 M) on guinea pig ileal longitudinal smooth muscle (GPILSM). The alkyl 6‐methyl‐4‐(2‐pyridyl)‐1,2,3,4‐tetrahydro‐2H‐pyrimidine‐2‐one‐5‐carboxylates did not show any inotropic effect on heart since no increase, or decrease, in the contractile force of guinea pig left atrium was observed. These structure activity studies show that the alkyl 6‐methyl‐4‐(2‐pyridyl)‐1,2,3,4‐tetrahydro‐2H‐pyrimidine‐2‐one‐5‐carboxylates ( 4a‐e ) are partial bioisosteres of nifedipine with respect to calcium channel antagonist activity on guinea pig ileal longitudinal smooth muscle (GPILSM).