Lamellar structure in poly(ala-gly) determined by solid-state NMR and statistical mechanical calculations

Lamellar structure of poly(Ala-Gly) or (AG)n in the solid was examined using 13C solid-state NMR and statistical mechanical approaches. Two doubly labeled versions, [1-13C]Gly14[1-13C]Ala15- and [1-13C]Gly18[1-13C]Ala19 of (AG)15 were examined by two-dimensional (2D) 13C spin diffusion NMR in the solid state. In addition five doubly labeled [15N,13C]-versions of the same peptide, (AG) 15 and 15 versions labeled [3-13C] in each of the successive Ala residues were utilized for REDOR and 13C CP/MAS NMR measurements, respectively. The observed spin diffusion NMR spectra were consistent with a structure containing a combination of distorted beta-turns with a large distribution of the torsion angles and antiparallel beta-sheets. The relative proportion of the distorted beta-turn form was evaluated by examination of 13C CP/MAS NMR spectra of [3-13C]Ala-(AG)15. In addition, REDOR determinations showed five kinds of atomic distances between doubly labeled 13C and 15N nuclei which were also interpreted in terms of a combination of beta-sheets and beta-turns. Our statistical mechanical analysis is in excellent agreement with our Ala Cbeta 13C CP/MAS NMR data strongly suggesting that (AG)15 has a lamellar structure.     

Short polyglutamine peptide forms a high-affinity binding site for thioflavin-T at the N-terminus

Thioflavin-T is one of the most important amyloid specific dyes and has been used for more than 50 years; however, the molecular mechanism of staining is still not understood. Chemically synthesized short polyglutamine peptides (Q(n), n = 5-10) were subjected to the thioflavin-T (ThT) staining assay. It was found that the minimum Q(n) peptide that stained positive to ThT was Q(6). Two types of ThT-binding sites, a high-affinity site (k(d1) = 0.1-0.17 μM) and a low-affinity site (k(d2) = 5.7-7.4 μM), were observed in short polyQs (n = 6-9). (13)C{(2)H}REDOR NMR experiments were carried out to extract the local structure of ThT binding sites in Q(8) peptide aggregates by observing the intermolecular dipolar coupling between [3-Me-d(3)]ThT and natural abundance Q(8) or residue-specific [1,2-(13)C(2)] labeled Q(8)s. (13)C{(2)H}REDOR difference spectra of the [3-Me-d(3)]ThT/natural abundance Q(8) (1/9) complex indicated that all of the five carbons of the glutamine residue participated in the formation of ThT-binding sites. (13)C{(2)H}DQF-REDOR experiments of [3-Me-d(3)]ThT/residue-specific [1,2-(13)C(2)] labeled Q(8) (1/50) complexes demonstrated that the N-terminal glutamine residue had direct contact with the ThT molecule at the high-affinity ThT-binding sites.     

The economical synthesis of [2'-(13)C, 1,3-(15)N2]uridine; preliminary conformational studies by solid state NMR

The synthesis of [2'-(13)C, 1,3-(15)N2]uridine 11 was achieved as follows. An epimeric mixture of D-[1-(13)C]ribose 3 and D-[1-(13)C]arabinose 4 was obtained in excellent yield by condensation of K13CN with D-erythrose 2 using a modification of the Kiliani-Fischer synthesis. Efficient separation of the two aldose epimers was pivotally achieved by a novel ion-exchange (Sm3+) chromatography method. D-[2-(13)C]Ribose 5 was obtained from D-[1-(13)C]arabinose 4 using a Ni(II) diamine complex (nickel chloride plus TEMED). Combination of these procedures in a general cycling manner can lead to the very efficient preparation of specifically labelled 13C-monosaccharides of particular chirality. 15N-labelling was introduced in the preparation of [2'-(13)C, 1,3-(15)N2]uridine 11 via [15N2]urea. Cross polarisation magic angle spinning (CP-MAS) solid-state NMR experiments using rotational echo double resonance (REDOR) were carried out on crystals of the labelled uridine to show that the inter-atomic distance between C-2' and N-1 is closely similar to that calculated from X-ray crystallographic data. The REDOR method will be used now to determine the conformation of bound substrates in the bacterial nucleoside transporters NupC and NupG.     

Homonuclear and heteronuclear NMR studies of a statherin fragment bound to hydroxyapatite crystals

Acidic proteins found in mineralized tissues act as nature's crystal engineers, where they play a key role in promoting or inhibiting the growth of minerals such as hydroxyapatite (HAP), Ca10(PO4)6(OH)2, the main mineral component of bone and teeth. Key to understanding the structural basis of protein-crystal recognition and protein control of hard tissue growth is the nature of interactions between the protein side chains and the crystal surface. In an earlier work we have measured the proximity of the lysine (K6) side chain in an SN-15 peptide fragment of the salivary protein statherin adsorbed to the Phosphorus-rich surface of HAP using solid-state NMR recoupling experiments. 15N{31P} rotational echo double resonance (REDOR) NMR data on the side-chain nitrogen in K6 gave rise to three different models of protein-surface interaction to explain the experimental data acquired. In this work we extend the analysis of the REDOR data by examining the contribution of interactions between surface phosphorus atoms to the observed 15N REDOR decay. We performed 31P-31P recoupling experiments in HAP and (NH4)2HPO4 (DHP) to explore the nature of dipolar coupled 31P spin networks. These studies indicate that extensive networks of dipolar coupled 31P spins can be represented as stronger effective dipolar couplings, the existence of which must be included in the analysis of REDOR data. We carried out 15N{31P} REDOR in the case of DHP to determine how the size of the dephasing spin network influences the interpretation of the REDOR data. Although use of an extended 31P coupled spin network simulates the REDOR data well, a simplified 31P dephasing system composed of two spins with a larger dipolar coupling also simulates the REDOR data and only perturbs the heteronuclear couplings very slightly. The 31P-31P dipolar couplings between phosphorus nuclei in HAP can be replaced by an effective dipolar interaction of 600 Hz between two 31P spins. We incorporated this coupling and applied the above approach to reanalyze the 15N{31P} REDOR of the lysine side chain approaching the HAP surface and have refined the binding models proposed earlier. We obtain 15N-31P distances between 3.3 and 5 A from these models that are indicative of the possibility of a lysine-phosphate hydrogen bond.     

Monomeric lithium triazapentadienyl complexes

Treatment of 1,3,5-triazapentadienes [N{(C3F7)C(Mes)N}2]H and [N{(C3F7)C(Dipp)N}2]H (where Mes = 2,4,6-Me3C6H2; Dipp = 2,6-Pr(i)2C6H3) with n-BuLi in hexane, followed by the crystallization from hexane-THF mixture afforded the corresponding lithium 1,3,5-triazapentadienyl complexes as their THF solvates. X-Ray crystallographic analyses revealed that [N{(C3F7)C(Mes)N}2]Li(THF)2 and [N{(C3F7)C(Dipp)N}2]Li(THF) are monomeric in the solid state. [N{(C3F7)C(Mes)N}2]Li(THF)2 has a four-coordinate lithium center with a distorted tetrahedral geometry, and features a boat-shaped C2N3Li metallacycle. [N{(C3F7)C(Dipp)N}2]Li(THF) has a three-coordinate lithium atom and a planar, U-shaped C2N3 ligand backbone. The synthesis, solid-state structure, and 1H and 19F NMR spectroscopic details of [N{(C3F7)C(Mes)N}2]H are also reported.     

Solid state NMR investigation of intact human bone quality: balancing issues and insight into the structure at the organic-mineral interface

Age-related bone fragility fractures present a significant problem for public health. Measures of bone quality are increasingly recognized to complement the conventional bone mineral density (BMD) based assessment of fracture risk. The ability to probe and understand bone quality at the molecular level is desirable in order to unravel how the structure of organic matrix and its association with mineral contribute to the overall mechanical properties. The (13)C{(31)P} REDOR MAS NMR (Rotational Echo Double Resonance Magic Angle Spinning Nuclear Magnetic Resonance) technique is uniquely suited for the study of the structure of the organic-mineral interface in bone. For the first time, we have applied it successfully to analyze the structure of intact (non-powdered) human cortical bone samples, from young healthy and old osteoporotic donors. Loading problems associated with the rapid rotation of intact bone were solved using a Finite Element Analysis (FEA) approach, and a method allowing osteoporotic samples to be balanced and spun reproducibly is described. REDOR NMR parameters were set to allow insight into the arrangement of the amino acids at the mineral interface to be accessed, and SVD (Singular Value Decomposition) was applied to enhance the signal to noise ratio and enable a better analysis of the data. From the REDOR data, it was found that carbon atoms belonging to citrate/glucosaminoglycans (GAGs) are closest to the mineral surface regardless of age or site. In contrast, the arrangement of the collagen backbone at the interface varied with site and age. The relative proximity of two of the main amino acids in bone matrix proteins, hydroxyproline and alanine, with respect to the mineral phase was analyzed in more detail, and discussed in view of glycation measurements which were carried out on the tissues. Overall, this work shows that the (13)C{(31)P} REDOR NMR approach could be used as a complementary technique to assess a novel aspect of bone quality, the organic-mineral interface structure.     

Conformational constraints in solid-state NMR of uniformly labeled polypeptides from double single-quantum-filtered rotational echo double resonance

A solid-state nuclear magnetic resonance (NMR) technique is described for obtaining constraints on the backbone conformation of a protein or peptide that is prepared with uniform (15)N,(13)C labeling of consecutive pairs of amino acids or of longer segments. The technique, called double single-quantum-filtered rotational echo double resonance (DSQ-REDOR), uses frequency-selective REDOR to prepare DSQ coherences involving directly bonded backbone (13)CO and (15)NH sites, to dephase these coherences under longer-range (15)NH-(13)CO dipole-dipole couplings in a conformationally dependent manner, and to convert the remaining DSQ coherences to detectable transverse (13)C-spin polarization. The efficacy of DSQ-REDOR is demonstrated in experiments on two isotopically labeled samples, the helical peptide MB(i + 4)EK and the amyloid-forming peptide Abeta(11-25).     

13C/15N-19F intermolecular REDOR NMR study of the interaction of TAR RNA with Tat peptides

The complex of the HIV TAR RNA with the viral regulatory protein Tat is of considerable interest, but the plasticity of this interaction has made it impossible so far to establish the structure of that complex. In order to explore a new approach to obtain structural information on protein-RNA complexes, we performed (13)C/(15)N-(19)F REDOR NMR experiments in the solid state on TAR bound to a peptide comprising the RNA-binding section of Tat. A critical arginine in the peptide was uniformly (13)C and (15)N labeled, and 5-fluorouridine was incorporated at the U23 position of TAR. REDOR irradiation resulted in dephasing of the (13)C and (15)N resonances, indicating the proximity of the U23(5F)-C and U23(5F)-N spin pairs. Best fits to the REDOR data show the U23(5F)-C distances and the U23(5F)-N distances are in good agreement with the distances obtained from solution NMR structures of partial complexes of Tat with TAR. These results demonstrate that it is possible to study protein-RNA complexes using solid-state REDOR NMR measurements, adding to a growing list of solid state techniques for studying protein-nucleic acid complexes.     

Frequency selective heteronuclear dipolar recoupling in rotating solids: accurate (13)C-(15)N distance measurements in uniformly (13)C,(15)N-labeled peptides

We describe a magic-angle spinning NMR experiment for selective (13)C-(15)N distance measurements in uniformly (13)C,(15)N-labeled solids, where multiple (13)C-(15)N and (13)C-(13)C interactions complicate the accurate measurement of structurally interesting, weak (13)C-(15)N dipolar couplings. The new experiment, termed FSR (frequency selective REDOR), combines the REDOR pulse sequence with a frequency selective spin-echo to recouple a single (13)C-(15)N dipolar interaction in a multiple spin system. Concurrently the remaining (13)C-(15)N dipolar couplings and all (13)C-(13)C scalar couplings to the selected (13)C are suppressed. The (13)C-(15)N coupling of interest is extracted by a least-squares fit of the experimentally observed modulation of the (13)C spin-echo intensity to the analytical expression describing the dipolar dephasing in an isolated heteronuclear spin pair under conventional REDOR. The experiment is demonstrated in three uniformly (13)C,(15)N-labeled model systems: asparagine, N-acetyl-L-Val-L-Leu and N-formyl-L-Met-L-Leu-L-Phe; in N-formyl-[U-(13)C,(15)N]L-Met-L-Leu-L-Phe we have determined a total of 16 internuclear distances in the 2.5-6 A range.     

Gold(I) ethylene and copper(I) ethylene complexes supported by a polyhalogenated triazapentadienyl ligand

A rare gold(I) ethylene complex and the closely related copper(I) ethylene adduct have been isolated using [N{(C3F7)C(2,6-Cl2C6H3)N}2]- as the supporting ligand. [N{(C3F7)C(2,6-Cl2C6H3)N}2]Au(C2H4) (1) is an air-stable solid. It features a U-shaped triazapentadienyl ligand backbone and a three-coordinate, trigonal-planar gold center. The copper(I) adduct [N{(C3F7)C(2,6-Cl2C6H3)N}2]Cu(C2H4) (2) also has a similar structure. The 13C NMR signal corresponding to the ethylene carbons of 1 appears at about 64 ppm upfield from the free ethylene, while the ethylene carbons of 2 show a relatively smaller (39 ppm) upfield shift. [N{(C3F7)C(2,6-Cl2C6H3)N}2]M(C2H4) (M=Cu, Au) mediate carbene-transfer reactions from ethyl diazoacetate to saturated and unsaturated hydrocarbons.     

Synthesis of stereoarray isotope labeled (SAIL) lysine via the "head-to-tail" conversion of SAIL glutamic acid

A stereoarray isotope labeled (SAIL) lysine, (2S,3R,4R,5S,6R)-[3,4,5,6-(2)H(4);1,2,3,4,5,6-(13)C(6);2,6-(15)N(2)]lysine, was synthesized by the "head-to-tail" conversion of SAIL-Glu, (2S,3S,4R)-[3,4-(2)H(2);1,2,3,4,5-(13)C(5);2-(15)N]glutamic acid, with high stereospecificities for all five chiral centers. With the SAIL-Lys in hand, the unambiguous simultaneous stereospecific assignments were able to be established for each of the prochiral protons within the four methylene groups of the Lys side chains in proteins.     

15N and 13C{14N} NMR investigation of the major nitrogen-containing segment in an aquatic fulvic acid: evidence for a hydantoin derivative

A nitrogen-rich segment in a fulvic acid (FA) from Pony Lake, a coastal pond in Antarctica, was investigated by (15)N and (13)C{(14)N} solid-state NMR techniques. As reported previously, the (13)C{(14)N} spectrum of C bonded to N exhibits a peak at 157 ppm that is assigned to an sp(2)-hybridized carbon bonded to at least two nitrogen atoms. This segment contains 48% of all N in the sample. (15)N NMR shows distinct signals, 20 ppm upfield and downfield from the typical peptide resonance; dipolar dephasing confirmed that they are due to protonated N. The well-resolved downfield peak, which accounts for 1/4 of the spectral area, cannot be assigned to aromatic heterocycles, such as purines, because the fraction of aromatic C bonded to N in this sample is very small. Analysis of (15)N chemical-shift trends and (15)N NMR of model compounds, such as arginine and its derivatives, excludes assignment to a guanidinium ion or to substituted guanidino groups. Similarly, ureido groups, -NH-CO-NH-, that are not bonded to a second C = O do not match the observed (15)N peaks in the FA, since both N resonate upfield from the peptide resonance. On the other hand, all chemical shifts are matched within the observed range by the -C(alkyl)-NH-CO-NH-CO-C structure found in two nonaromatic heterocycles, hydantoin and dihydrouracil. The five-membered hydantoin ring, which is found in the purine metabolite allantoin, provides a better match than the six-membered dihydrouracil ring. Regular uracil or thymine fails to produce adequate agreement with observed chemical shifts.     

Temperature dependence and resonance assignment of 13C NMR spectra of selectively and uniformly labeled fusion peptides associated with membranes

HIV-1 and influenza viral fusion peptides are biologically relevant model fusion systems and, in this study, their membrane-associated structures were probed by solid-state NMR (13)C chemical shift measurements. The influenza peptide IFP-L2CF3N contained a (13)C carbonyl label at Leu-2 and a (15)N label at Phe-3 while the HIV-1 peptide HFP-UF8L9G10 was uniformly (13)C and (15)N labeled at Phe-8, Leu-9 and Gly-10. The membrane composition of the IFP-L2CF3N sample was POPC-POPG (4:1) and the membrane composition of the HFP-UF8L9G10 sample was a mixture of lipids and cholesterol which approximately reflects the lipid headgroup and cholesterol composition of host cells of the HIV-1 virus. In one-dimensional magic angle spinning spectra, labeled backbone (13)C were selectively observed using a REDOR filter of the (13)C-(15)N dipolar coupling. Backbone chemical shifts were very similar at -50 and 20 degrees C, which suggests that low temperature does not appreciably change the peptide structure. Relative to -50 degrees C, the 20 degrees C spectra had narrower signals with lower integrated intensity, which is consistent with greater motion at the higher temperature. The Leu-2 chemical shift in the IFP-L2CF3N sample correlates with a helical structure at this residue and is consistent with detection of helical structure by other biophysical techniques. Two-dimensional (13)C-(13)C correlation spectra were obtained for the HFP-UF8L9G10 sample and were used to assign the chemical shifts of all of the (13)C labels in the peptide. Secondary shift analysis was consistent with a beta-strand structure over these three residues. The high signal-to-noise ratio of the 2D spectra suggests that membrane-associated fusion peptides with longer sequences of labeled amino acids can also be assigned with 2D and 3D methods.     

Tailoring 13C labeling for triple-resonance solid-state NMR experiments on aligned samples of proteins

In order to develop triple-resonance solid-state NMR spectroscopy of membrane proteins, we have implemented several different (13)C labeling schemes with the purpose of overcoming the interfering effects of (13)C-(13)C dipole-dipole couplings in stationary samples. The membrane-bound form of the major coat protein of the filamentous bacteriophage Pf1 was used as an example of a well-characterized helical membrane protein. Aligned protein samples randomly enriched to 35% (13)C in all sites and metabolically labeled from bacterial growth on media containing [2-(13)C]-glycerol or [1,3-(13)C]-glycerol enables direct (13)C detection in solid-state NMR experiments without the need for homonuclear (13)C-(13)C dipole-dipole decoupling. The (13)C-detected NMR spectra of Pf1 coat protein show a substantial increase in sensitivity compared to the equivalent (15)N-detected spectra. The isotopic labeling pattern was analyzed for [2-(13)C]-glycerol and [1,3-(13)C]-glycerol as metabolic precursors by solution-state NMR of micelle samples. Polarization inversion spin exchange at the magic angle (PISEMA) and other solid-state NMR experiments work well on 35% random fractionally and metabolically tailored (13)C-labeled samples, in contrast to their failure with conventional 100% uniformly (13)C-labeled samples.     

Structure of subtilosin A,an antimicrobial peptide from Bacillus subtilis with unusual posttranslational modifications linking cysteine sulfurs to alpha-carbons of phenylalanine and threonine

The complete primary and three-dimensional solution structures of subtilosin A (1), a bacteriocin from Bacillus subtilis, were determined by multidimensional NMR studies on peptide produced using isotopically labeled [(13)C,(15)N]medium derived from Anabaena sp. grown on sodium [(13)C]bicarbonate and [(15)N]nitrate. Additional samples of 1 were also generated by separate incorporations of [U-(13)C,(15)N]phenylalanine and [U-(13)C,(15)N]threonine using otherwise unlabeled media. The results demonstrate that in addition to having a cyclized peptide backbone (N and C termini), three cross-links are formed between the sulfurs of Cys13, Cys7, and Cys4 and the alpha-positions of Phe22, Thr28, and Phe31, respectively. Such posttranslational linkage of a thiol to the alpha-carbon of an amino acid residue is very unusual in natural peptides or proteins. Subtilosin A (1) belongs to a new class of bacteriocins.     

Magic angle spinning solid-state NMR spectroscopy for structural studies of protein interfaces. resonance assignments of differentially enriched Escherichia coli thioredoxin reassembled by fragment complementation

De novo site-specific backbone and side-chain resonance assignments are presented for U-15N(1-73)/U-13C,15N(74-108) reassembly of Escherichia coli thioredoxin by fragment complementation, determined using solid-state magic angle spinning NMR spectroscopy at 17.6 T. Backbone dihedral angles and secondary structure predicted from the statistical analysis of 13C and 15N chemical shifts are in general agreement with solution values for the intact full-length thioredoxin, confirming that the secondary structure is retained in the reassembled complex prepared as a poly(ethylene glycol) precipitate. The differential labeling of complementary thioredoxin fragments introduced in this work is expected to be beneficial for high-resolution structural studies of protein interfaces formed by protein assemblies by solid-state NMR spectroscopy.     

Syntheses of highly fluorinated 1,3,5-triazapentadienyl ligands and their use in the isolation of copper(I)-carbonyl and copper(I)-ethylene complexes

Fully fluorinated triazapentadienyl ligand [N{(C3F7)C(C6F5)N}2]- and the related [N{(C3F7)C(2-F,6-(CF3)C6H3)N}2]- have been synthesized in good yield via a convenient route and used in the isolation of three- and four-coordinate copper(I)-carbon monoxide complexes. They show fairly high nu(CO) values (>2100 cm(-1)), indicating the presence of electron-poor Cu sites. The copper(I)-ethylene adduct [N{(C3F7)C(C6F5)N}2]Cu(C2H4), featuring a three-coordinate Cu site, has also been synthesized using [N{(C3F7)C(C6F5)N}2]CuNCCH3 and C2H4.     

An NMR and molecular modeling study of carbosilane-based dendrimers functionalized with phenolic groups or titanium complexes at the periphery

Dendrimers are modified polymers whose architecture is defined by the presence of a central atom or core with multiple branches. These molecules lend themselves to a variety of architectures and uses, including drug delivery and catalysis. The study of the molecular conformations and shapes of dendritic molecules is necessary but not yet routine. Here we present an NMR and molecular modeling study of a series of carbosilane dendrimers, namely 1G-{(CH2)3[C6H3(OMe)]OH}4 (1), 2G-{(CH2)3[C6H3(OMe)]OH}8 (2), and 2G-{(CH2)3[C6H3(OMe)]O[Ti(C5H5)Cl2]}8 (3). Various two-dimensional NMR techniques were used to completely assign the 1H and 13C resonances of molecules 1-3. This information was used, in conjunction with 1H and 13C spin-lattice relaxation measurements, to assess the chain motion of the molecules. The NMR data were also compared with 1-ns molecular dynamics (MD) simulations of 1 and 2 using the MMFF94 force field. The results indicate that these dendrimers possess a core that is motionally decoupled from the rest of the dendrimer, with flexible arm segments that extend from the core. The addition of eight functionalized titanium groups to the ends of the dendrimer chains of 2 to yield molecule 3 serves to further restrict chain motion.     

Mixed-transition-metal acetylides: synthesis and characterization of complexes with up to six different transition metals connected by carbon-rich bridging units

The synthesis and reaction chemistry of heteromultimetallic transition-metal complexes by linking diverse metal-complex building blocks with multifunctional carbon-rich alkynyl-, benzene-, and bipyridyl-based bridging units is discussed. In context with this background, the preparation of [1-{(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C}-3-{(tBu(2)bpy)(CO)(3)ReC[triple bond]C}-5-(PPh(2))C(6)H(3)] (10) (dppf = 1,1'-bis(diphenylphosphino)ferrocene; tBu(2)bpy = 4,4'-di-tert-butyl-2,2'-bipyridyl; Ph = phenyl) is described; this complex can react further, leading to the successful synthesis of heterometallic complexes of higher nuclearity. Heterotetrametallic transition-metal compounds were formed when 10 was reacted with [{(eta(5)-C(5)Me(5))RhCl(2)}(2)] (18), [(Et(2)S)(2)PtCl(2)] (20) or [(tht)AuC[triple bond]C-bpy] (24) (Me = methyl; Et = ethyl; tht = tetrahydrothiophene; bpy = 2,2'-bipyridyl-5-yl). Complexes [1-{(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C}-3-{(tBu(2)bpy)(CO)(3)ReC[triple bond]C}-5-{PPh(2)RhCl(2)(eta(5)-C(5)Me(5))}C(6)H(3)] (19), [{1-[(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C]-3-[(tBu(2)bpy)(CO)(3)ReC[triple bond]C]-5-(PPh(2))C(6)H(3)}(2)PtCl(2)] (21), and [1-{(eta(2)-dppf)(eta(5)-C(5)H(5))RuC[triple bond]C}-3-{(tBu(2)bpy)(CO)(3)ReC[triple bond]C}-5-{PPh(2)AuC[triple bond]C-bpy}C(6)H(3)] (25) were thereby obtained in good yield. After a prolonged time in solution, complex 25 undergoes a transmetallation reaction to produce [(tBu(2)bpy)(CO)(3)ReC[triple bond]C-bpy] (26). Moreover, the bipyridyl building block in 25 allowed the synthesis of Fe-Ru-Re-Au-Mo- (28) and Fe-Ru-Re-Au-Cu-Ti-based (30) assemblies on addition of [(nbd)Mo(CO)(4)] (27), (nbd = 1,5-norbornadiene), or [{[Ti](mu-sigma,pi-C[triple bond]CSiMe(3))(2)}Cu(N[triple bond]CMe)][PF(6)] (29) ([Ti] = (eta(5)-C(5)H(4)SiMe(3))(2)Ti) to 25. The identities of 5, 6, 8, 10-12, 14-16, 19, 21, 25, 26, 28, and 30 have been confirmed by elemental analysis and IR, (1)H, (13)C{(1)H}, and (31)P{(1)H} NMR spectroscopy. From selected samples ESI-TOF mass spectra were measured. The solid-state structures of 8, 12, 19 and 26 were additionally solved by single-crystal X-ray structure analysis, confirming the structural assignment made from spectroscopy.     

Solid‐State NMR Investigations on the Amorphous Network of Precursor‐Derived Si2B2N5C4 Ceramics

Employing a multitude of modern solid state NMR techniques including ¹³C{¹⁵N}REDOR NMR, ¹H–¹³C CP NMR, ¹¹B MQMAS NMR spectroscopic experiments, the structural organization of Si₂B₂N₅C₄ ceramic has been studied. The experiments were executed on double isotope enriched (¹³C, ¹⁵N) and natural isotope abundance Si₂B₂N₅C₄ ceramics. The materials were synthesized by aminolysis and subsequent pyrolysis of intermediate pre‐ceramic polymers that were obtained from the single source precursor TSDE, 1‐(trichlorosilyl)‐1‐(dichloroboryl)ethane (Cl₃Si–CH(CH₃)–BCl₂). The result of the ¹³C{¹⁵N} REDOR NMR spectroscopic experiment shows that carbon atoms are incorporated into the network by bridging to nitrogen, which already occurs during the polymerization step. Furthermore, the combined results of ¹¹B NMR and ¹¹B MQMAS NMR indicate that boron atoms may also be connected to carbon in addition to nitrogen.