Preparation and study of two polysiloxanes with pendant hand-basket type calixarene stationary phases for capillary gas chromatography

In this study two novel pendant hand-basket type calixarene gas chromatography stationary phases were prepared by hydrosilylation of ω-undecenyloxymethyl dimethyl calix[4]-15C5 and ω-undecenyloxymethyl dimethyl calix[4]-18C6 with dichloromethane followed by condensation reaction with silanol-terminated polydimethylsiloxane. Important stationary phase properties of these two novel stationary phases such as column efficiency, polarity, and selectivity were examined and compared with those of ω-undecyloxymethyl-18-crown-6, 2,3-benzo-9-propyloxymethyl-15-crown-5 and 2,3-benzo-11-propyloxymethyl-18-crown-6. Excellent thermostability from 60 to 330°C with onset bleeding temperatures at 308°C have been found. The mechanism of specific selectivity for position isomers based on the calix[4]crown ether ring, the molecular size of the solute and its shape are discussed.     

Synthesis of novel calix[4]crown telomers and selective extraction of cesium ions

p-tert-Butylcalix[4]diazacrown-4 telomer, which contains hard and soft ion binding sites, was synthesized. It exhibited high selectivity toward cesium ions. The binding sites may complex alkali metal ions selectively.     

Liquid membrane transport of cytochrome c using a calix[6]arene carboxylic acid derivative as a carrier

The present study examined the liquid membrane transport of the cationic protein cytochrome c, using the macrocyclic compound calix[6]arene, which is a carboxylic acid derivative, as a carrier. The transport rate was governed by carrier concentration and the pH gradient between the feed and the receiving phases, as well as the salt concentration in the aqueous phases. Transport of cytochrome c was examined using a series of calix[n]arene carboxylic acid derivatives (n = 4, 6 and 8). Cytochrome c successfully permeated membranes in the presence of the calix[6]arene derivative. Liquid membrane separation of cytochrome c from a mixture of cationic proteins was demonstrated under optimal conditions. Cytochrome c was selectively extracted by the calix[6]arene carboxylic acid derivative and 77% of the extracted cytochrome c was recovered into the receiving phase. In this liquid membrane system, which discriminates between the number of lysine residues on the surface of proteins, cationic proteins with similar molecular weights and pIs were separated with macrocyclic compounds.     

Cone di-ionisable calix[4]arene-1,3-crown-5 ligands with elongated pendant side arms: synthesis and metal ion extraction

Abstract

Syntheses of p-H-calix[4]arene-1,3-crown-5 and p-tert-butylcalix[4]arene-1,3-crown-5 ligands with two elongated, proton-ionisable side arms in the cone conformation are described. For solvent extractions from aqueous solution into chloroform, the influence of lengthening the lower rim proton-ionisable side arms and addition of para substituents to the upper rim of the calix[4]crown scaffold on the efficiency and selectivity of metal cation solvent extraction are evaluated.     

Synthesis and characterisation of thermomesogenic polysiloxanes with 2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione units in the main chain

The synthesis of the first two liquid crystalline polysiloxanes bearing 3,6-diaryl-2,5-dihydropyrrolo-[3,4-c]pyrrole-1,4-dione units in their main chain are described. Investigations on their thermotropic phase behaviour by polarising microscopy reveal nematic or smectic enantiotropic phases, respectively.     

Synthesis of a novel calix[4]arene-based fluorescent ionophore and its metal ions recognition properties

A novel fluorescent ionophore derived from calix[4]arene and pyrazoline was designed and synthesized. Its molecular structure was confirmed by 1H NMR and element analysis. The resulting material shows specific fluorescent behavior toward the Zn2+ ion among the other divalent metal ions, such as Co2+, Ni2+, Cu2+. The primary results indicate this ionophore material is a potential material for developing efficient fluorescent Zn2+ chemosensors.     

Efficient synthesis of calix[6]tmpa: a new calix[6]azacryptand with unique conformational and host-guest properties

A new C(3v)-symmetrical calix[6]azacryptand, that is, calix[6]tmpa (11), was synthesized by efficient [1+1] macrocyclization reactions. Remarkably, both linear and convergent synthetic strategies that were applied lead to equally good overall yields. Calix[6]tmpa behaves as a single proton sponge and appeared reluctant to undergo polyprotonation, unlike classical tris(2-pyridylmethyl)amine (tmpa) derivatives. It also acts as a good host for ammonium ions. Interestingly, it strongly binds a sodium ion and a neutral guest molecule, such as a urea, an amide, or an alcohol, in a cooperative way. A (1)H NMR study indicated that the ligand, as well as its complexes, adopt a major flattened cone conformation that is the opposite of that observed with the previously reported calix[6]cryptands. Characterization of the monoprotonated derivative 11H(+) by X-ray diffraction also revealed the presence of a 1,3-alternate conformation, which is the first example of its kind in the calix[6]arene family. This conformer is probably also present in solution as a minor species. The important covalent constraint induced by the polyaromatic tmpa cap on the calixarene skeleton, and conversely from the calix core onto the tmpa moiety, is the likely basis for the unique conformational and chemical properties of this host.     

Macrocyclic anthracene-anchored calix[4]arene as a sensitive and selective fluorescent chemosensor for ytterbium ions

ABSTRACT

A novel anthracene anchored cone calix[4]arene pyridine amide receptor C4PA was synthesized and characterized by combination of spectroscopic and spectrophotometric techniques. Ion binding properties of C4PA towards a series of metal cations were investigated by UV and fluorescence spectra. A remarkable increase for receptor C4PA in fluorescence intensity in the presence of trace amounts of Yb³⁺ was observed. C4PA showed “turn on” type fluorescence response toward Yb³⁺ with high selectivity and C4PA also retained its selectivity toward Yb³⁺ in the presence of most competing metal ions.     

Evaluation of a calix[4]-bis-crown-6 ionophore-based supported liquid membrane system for selective Cs transport from acidic solutions

Facilitated transport of Cs(I) from aqueous nitrate feed solutions to a receiver solution containing distilled water through a supported liquid membrane (SLM) containing calix[4]-bis-2,3-naphtho-crown-6 (CNC) in 0.45 μm PTFE (polytetrafluoroethylene) membranes was investigated. The carrier solution usually consisted of CNC dissolved in a mixture of 80% 2-nitrophenyl octyl ether and 20% n-dodecane. The transport rates were found to be influenced by the mobile carrier concentration, cesium concentration as well as the feed acidity. The extracted species conformed to a stoichiometry of 1:1 metal to ligand ratio suggesting the extraction of an organophilic mono-Cs-crown complex. Fission products obtained from an irradiated natural uranium target were found to be poorly transported while Cs-137 got significantly transported suggesting the possible application of the separation method for the removal of bulk Cs-137 from radioactive waste solutions. Durability/chemical stability of the membrane was remarkably good when tested over 20 days of continuous operation.     

Syntheses of novel calix[4]arene hydrazone-based receptors and their cooperative complexation with soft and hard metal ions

Four novel calix[4]arene hydrazone-based receptors 3a?Cd were prepared in yields of 69?C87% by condensating formylated calix[4]arene ester (2) with salicylyl hydrazine, 2,4-dinitrophenyl hydrazine, nicotinyl hydrazine or phenyl thiosemicarhazide, respectively. New compounds were characterized through elemental analysis, IR, ESI?CMS, ¹H NMR studies. Compounds 3a?Cd containing two binding sites had the complexation abilities for hard and soft cations concurrently. The noncompetitive extracting experiments showed compounds 3a?Cd were excellent receptors for hard and soft metal cations. The competitive extracting experiments exhibited the cooperative complexation in binding hard and soft metal cations and compound 3a possessed outstanding selectivity for Na⁺ and Hg²⁺. The IR spectra of compound 3a before and after complexation revealed that the soft metal cation was binded in the cavity composed of hydrazone groups and azo groups at the upper rims of calix[4]arene units and hard metal cations was binded in cavity composed of ester groups and phenolic hydroxyl groups at the lower rims of calix[4]arene units.     

Development and application of a fluorescent sensor for potassium ions based on a calix[6]arene ionophore and a novel cationic dye

A plasticised poly(vinyl chloride) optode membrane incorporated with a calix[6]arene hexaester, a H⁺-selective chromoionophore (3,3′,5,5′-tetramethyl-N,N-dibenzylbenzidine, a novel synthetic cationic dye) and a lipophilic potassium tetrakis(4-chlorophenyl)borate was used as a sensing device for the indirect optical determination of potassium ions. It exhibited a reversible response to the potassium ion in 0.05 mol/l HCl buffer media in the concentration range from 1 × 10^? 6 to 1 × 10^? 2 mol/l. The linear range was from 1.53 × 10^? 5 to 3.20 × 10^? 3 mol/l. The proposed optode sensor exhibited a fast response of less than 1 min, good repeatability (n = 7, RSD = 3.62%) at 5 × 10^? 5 mol/l, and long-term stability with 92% of its initial sensitivity after 1 month of storage. The selectivity of the potassium-selective membrane allows its application for the detection of the potassium concentration in real sample analysis. The result was satisfactory compared with atomic absorption spectrometry.     

Structural characterisation and photophysical properties of lanthanoid complexes of a tetra-amide functionalised calix[4]arene

Abstract

Lanthanoid complexes of a tetra-amide substituted calix[4]arene in the cone conformation are characterised by single crystal X-ray structure determination. The structural analysis shows that the metal ions are coordinated to the calixarene through the eight O donor atoms, along with one aqua ligand which is located within the cavity of the calixarene. The calixarene ligand was covalently incorporated into a polymethylmethacrylate monolith through p-allyl functional groups, followed by loading with a range of lanthanoid cations giving rise to light-emitting materials. The emission from the hydrid materials was found to be comparable to the solution phase emission.     

Synthesis and adsorption properties of p-sulfonated calix[4 and 6]arene-intercalated layered double hydroxides

The intercalation of water-soluble p-sulfonated calix[4 and 6]arene (CS4 and CS6) in the interlayer of the Mg-Al and Zn-Al layered double hydroxide (LDH) by the coprecipitation method has been investigated, as well as the adsorption properties of the resulting CS/LDHs for benzyl alcohol (BA) and p-nitrophenol (NP) to prepare new microporous organic-inorganic hybrid adsorbents. The amount and arrangement of CS intercalated was different by the kind of the host metal ions. CS4 cavity axis was perpendicular for the Mg-Al LDH basal layer and parallel for the Zn-Al LDH basal layer, while CS6 cavity axis was perpendicular for both the LDH basal layers. In the BET surface area measurement, the surface area of the Zn-Al/CS4/LDH was four times than that of the Mg-Al/CS4/LDH, expecting that the former has higher adsorption capacity than the latter. In fact, the adsorption ability of the CS/LDHs for BA and NP in aqueous solution was found to be larger in the Zn-Al/CS4/LDH than in the Mg-Al/CS4/LDH. In addition, the adsorption ability of both the LDHs was larger in the CS6/LDHs than in the CS4/LDHs. These results were explained by the difference in the amount and arrangement of CS intercalated in the LDH interlayer space.     

Investigation of tetracaine complexation with beta-cyclodextrins and p-sulphonic acid calix[6]arenes by nOe and PGSE NMR

Cyclodextrins (CD) and calixarenes are complexing agents that have been successfully used as pharmaceutical drug carriers, to improve the bioavailability of medicines. The aim of this work was to investigate the complexation of the local anesthetic tetracaine 1 with β-cyclodextrin 2, as well as with p-sulphonic acid calix[6]arene 3. ¹H NMR experiments were carried out in D₂O, i.e., with the charged tetracaine species 1. HR-DOSY ¹H NMR allowed determination of the fraction of complexed population (%p _bound = 55% and 70%) and the apparent association constants (K _a = 1358 and 3889 M⁻¹), respectively, for 1/2 and 1/3. These results confirm that a strong association takes place between 1 and 2, while the 1/3 complex is even more stable, due to the negatively charged sulphonic groups of 3. Studies conducted at pH 10 revealed that the association of the uncharged form of 1 with 3 is considerably weaker, while that with 2 increased significantly (K _a = 6597 M⁻¹), protecting the anesthetic against alkaline hydrolysis. ¹H-ROESY 1D NMR experiments allowed determination of the host-guest relative positions, revealing that the proposed topologies for the 1/2 and 1/3 complexes were quite different. The complexation of 1 with either 2 or 3 is being investigated in view of its potential use in new therapeutic formulations, designed to increase the bioavailability and/or to decrease the systemic toxicity of tetracaine, in anesthesia procedures.     

Efficient synthesis and host-guest properties of a new class of calix[6]azacryptands

Two members of a new class of calix[6]azacryptands, namely, calix[6]tampo and calix[6]tamb, have been synthesized through an efficient [1 + 1] macrocyclization reaction--reduction sequence. One of them has been obtained in a remarkably high overall yield from the known X(6)H(3)Me(3). In comparison to all the other calix[6]azacryptands, they possess unique conformational properties since they present a rigidified cone conformation with a partial filling of the cavity by the methoxy groups. In contrast to calix[6]tampo, the fully protonated derivative of calix[6]tamb behaves as a remarkable molecular receptor toward polar neutral guests. NMR studies have shown that the intracavity binding process is governed by a conformational flip of the aromatic walls of the calixarene core.     

Improved functionality and control in the isomerization of a calix[4]arene-capped azobenzene

An improved azobenzene core capped by two calix[4]arene units isomerizes readily between trans and cis configurations via photochemical and/or thermal means. In addition, the presence of acid (particularly HCl) increases the rate of thermal cis→trans conversion. These enhancements to the functional response, control, and understanding of calixarene-capped azobenzene isomerization are important for future application in the dynamic encapsulation of small chemical species.     

Synthesis and electrochemical properties of a novel calix[4]arene derivative for facilitated transfer of alkali metal ions across water/1,2-dichloroethane micro-interface

The alkali metal ion transfers facilitated by a novel calix[4]arene derivative (OPEC) across the water/1,2-dichloroethane (1,2-DCE) micro-interface supported at the tip of a micropipette were presented. The well-defined voltammetric behaviours except Cs⁺ was obtained by cyclic voltammetry and differential pulse voltammetry. The bulk concentration of metal ions was much higher than that of OPEC in the performed measurements. The diffusion coefficient of OPEC in the 1,2-DCE phase was calculated as 5.18 ± 0.70 × 10^? 6 cm² s^? 1. On the basis of the changes of the half-wave transfer potentials, the logarithms of the association constants having 1:1 ionophore–ion complex stoichiometry for Li⁺, Na⁺, K⁺ and Rb⁺ in 1,2-DCE were determined as 4.80, 4.62, 4.98 and 5.32, respectively. The facilitated ion transfers were also evaluated by the Randles equivalent circuit used for ac-impedance data analysis.     

Synthesis and structure of a novel molybdenum imido calix[6]arene

Treatment of p-tert-butylcalix[6]areneH₆ (H₆L) with [Mo(OBu^t)₂{[2,2′-(N)-C₆H₄]₂(CH₂CH₂)}] in refluxing toluene affords, after work-up, the complex [Mo(2-NC₆H₄CH₂CH₂C₆H₄NHC(Me)NH-2^/)LH₂]·4MeCN (1), which contains an 11-membered metallocyclic ring as characterised by Synchrotron X-radiation.