四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

Controlled Dynamic Helicity of a Folded Macrocycle Based on a Bisterephthalamide with a Twofold Z‐Shaped Structure

Dynamic helicity in a folded macrocycle and control of the helical preference are described. We designed macrocycle 1 with a dual mode of folding through the integration of two flexible units that are arranged twice to form a cyclic structure. As a folding unit, we used a terephthalamide skeleton and a Z‐shaped hydrocarbon: the former acted as a control unit to induce a preference of a particular sense of dynamic helicity and the latter was just a spacer. A terephthalamide unit provided a binding site for capturing a ditopic hydrogen‐bonding guest when it adopted helically folded syn forms (M/P). Thus, only the terephthalamide unit controlled the helical sense of dynamic helicity in a folded macrocycle through the supramolecular transmission of chirality upon complexation with a chiral ditopic guest. In addition, chirality on a host could also contribute to the control of the helical preference in a folded macrocycle, which led to exceptionally enhanced chiroptical signals.     

Crystal engineering of photochromic diarylethene single crystals

Photochromic performance of diarylethene single crystals was controlled by crystal engineering using non-covalent aromatic-aromatic interactions as the directional intermolecular force. A diarylethene derivative with two pentafluorophenyl groups, 1,2-bis(2-methyl-5-pentafluorophenyl-3-thienyl)perfluorocyclopentene (1a), formed stoichiometric co-crystals with benzene (Bz) and naphthalene (Np) by aryl-perfluoroaryl interactions. Face-to-face pi-stacking interactions between the pentafluorophenyl groups of 1a and the aromatic molecules are responsible for 2:1 and 1:1 stoichiometric compositions in 1a/Bz and 1a/Np co-crystals, respectively. The diarylethene underwent thermally stable and photoreversible photochromic reactions in a homo-crystal of 1a and co-crystals 1a/Bz and 1a/Np. The absorption spectra of the photogenerated closed-ring isomers varied depending on the conformation of the diarylethene molecules packed in the crystals. The diarylethene 1a also formed 1:1 stoichiometric co-crystals with different kinds of diarylethenes, 1,2-bis(2-ethyl-5-phenyl-3-thienyl)perfluorocyclopentene (2a) and 1,2-bis[2-methyl-5-(1-naphthyl)-3-thienyl]perfluorocyclopentene (3a). Both co-crystals 1a/2a and 1a/3a showed photochromism. Although 1a, 2a, and 3a underwent efficient photocyclization reactions in their homo-crystals, highly selective photocyclization reactions of 2a or 3a were observed in the co-crystals. The selective reactions were confirmed by HPLC and X-ray crystallography. Excited energy transfers from 1a to 2a and from 1a to 3a are considered to occur and cause the selective reactions.     

Synthesis of well-defined polymers with protected silanol groups by atom transfer radical polymerization and their use for the fabrication of polymeric nanoparticles

Copper-mediated atom transfer radical polymerization (ATRP) of a protected silanol group-holding methacrylate, methacryloxypropyltrimethoxysilane (MOPS), was investigated. In a dry condition using carefully distilled solvent and monomer, the polymerization proceeded in a living fashion providing a low-polydispersity polymer with a predicted molecular weight. The ATRP in conjunction with the sequential monomer addition of methyl methacrylate (MMA) and MOPS afforded a block copolymer of the type PMMA-b-poly(MMA-r-MOPS). The heat treatment of a solution of the block copolymer in the presence of a catalytic amount of ammonia gave a polymeric core-shell nanoparticle with a shell of PMMA moieties and a core of the poly(MMA-r-MOPS) blocks cross-linked via the condensation of the trimethoxysilane groups of the MOPS moieties.     

Trichalcogenasumanene ortho‐Quinones: Synthesis,Properties, and Transformation into Various Heteropolycycles

The regioselective transformation of heterobuckybowl trichalcogenasumanenes 1 a , b at peripheral butoxy groups afforded trichalcogenasumanene ortho ‐quinones 2 a , b . Compounds 2 a , b are distinct from 1 a , b in terms of their molecular geometry and electronic state; that is, they have a shallower bowl depth and show absorbance in the NIR region. The reaction of 2 a , b with diamines resulted in a variety of heteropolycycles, including molecular spoon 3 a – 6 a , planar π‐systems 3 b – 6 b , and highly twisted [7‐6‐6]‐fused systems 7 a , b . These new heteropolycycles had different optical/electrical properties: 4 a,b showed hole mobility of approximately 0.002 cm² V⁻¹ s⁻¹, 6 a displayed red emission in both solution and the solid state, and 7 a , b formed tight stacks of the curved π‐surface.     

Direct introduction of a hydrazide group into a quartz crystal microbalance surface with dodecanoic hydrazide embedded in a hybrid bilayer membrane

Hydrazide group has a potential of immobilizing an antibody on a sensor surface in a way that ensures an optimal orientation and efficiency of the antibody. However, a multi-step chemical process, required for the preparation of a hydrazide group, is a barrier to its extensive application. This paper describes a new method to introduce a hydrazide group to a sensor surface by a one-step process using dodecanoic hydrazide. The method is based on an ability of the dodecanoic hydrazide to be incorporated into a hybrid bilayer membrane (HBM) layer, thereby presenting its hydrazide group to the surface. Liposome containing dodecanoic hydrazide was added to a hydrophobic self-assembled monolayer surface of a quartz crystal microbalance for the formation of a HBM. Then, the hydrazide group, presented in the surface of the HBM layer, was utilized for the oriented immobilization of an antibody via its carbohydrate moiety which was partially oxidized prior to the conjugation reaction. Activity and stable status of the incorporated dodecanoic hydrazide was revealed by the efficiency and reproducibility of the resulting immunosensor chip.     

Ordered nano-structure of a stamped self-organized protein layer on a HOPG surface using a HFB carrier

A groundbreaking method for ordered molecular layer preparation on a solid surface employing the drop-stamp method has been developed by us taking advantage of the characteristics of the HFB molecule as a self-organizer/adsorption carrier. It is a smart method which can be used to prepare a self-organized protein layer on a solid surface without unspecific adsorption or defects. In our previous report, we clarified the self-organizing nature of HFB-tagged protein molecules on a surface of a solution droplet. In this report, a protein layer was prepared on a HOPG surface by using the drop-stamp method with a maltose binding protein (MBP)-tagged HFBII molecule. The structure of the stamped protein layer was investigated using frequency modulation atomic force microscopy (FM-AFM) in a liquid condition. The FM-AFM images show that the drop-stamp method can prepare an ordered protein layer on a solid surface smartly. The drop-stamp method using a HFB carrier is a practical method which can be used to prepare an ordered protein layer on a solid substrate surface without unspecific adsorption defects.     

Gradient extremals and valley floor bifurcations on potential energy surfaces

Gradient extremals are curves in configuration space denned by the condition that the gradient of the potential energy is an eigenvector of the Hessian matrix. Solutions of a corresponding equation go along a valley floor or along a crest of a ridge, if the norm of the gradient is a minimum, and along a cirque or a cliff or a flank of one of the two if the gradient norm is a maximum. Properties of gradient extremals are discussed for simple 2D model surfaces including the problem of valley bifurcations.     

Synthesis of the glycosyl lactol moiety of halichoblelide

The enantioselective synthesis of the 2-deoxy-α-l-fucosyl lactol moiety of halichoblelide, a potent cytotoxin isolated from an actinomycete of marine origin, was achieved using a diastereoselective addition of a dithianyl anion to a chiral aldehyde intermediate and a stereoselective glycosidation of a hydroxy lactone intermediate derived from the addition product with a protected l-fucal as the key steps.     

Prediction of the effects of imperfect construction of a QMS filter

Modelling techniques have previously predicted the observed behaviour of perfectly manufactured QMS mass filters. These methods are extended to examination of the behaviour of imperfect QMS filters; this examination considers the behaviour of QMS filters with one rod displaced radially inward as this is a simple manufacturing defect that arises when a rod does not fit correctly into the mounting.The results demonstrate the well known, but poorly documented property, that exchanging the connections of a poorly performing QMS device sometimes improves performance. This is shown to arise because only a displacement of a y-rod produces a large effect. The results also show that displacement of a y-rod may produce a spurious additional peak known as a precursor. More detailed investigation suggests that precursors are not separate peaks but are formed because a section of the main peak is removed causing an apparent double peak.Finally results confirm that adjustment of the voltage applied to a displaced rod can be used to significantly improve the QMS behaviour. A small change by a fraction alpha in the position of a single rod may be compensated by a change of 2 x alpha in the voltage applied to that rod.     

A novel method that improves sensitivity of protein detection in PAGE and Western blot

We have developed a simple and inexpensive method that improves sensitivity of protein and antigen detection in standard PAGE procedures. Our technique uses a sample microloader device with a funnel‐like structure, filled with a 4% stacking gel. When attach to the top of a polyacrylamide slab gel, the proteins in a sample are concentrated by electrophoresis into a small volume as they emerge from the device's narrow outlet. Our microloader has several advantages over previous devices, including simple assembly, high versatility, and absence of cross‐contamination between lanes. Addition of this device to a slab gel results in a fivefold increase in the sensitivity of antigen detection in a Western blot. As a result, less protein is required for loading and signal detection. Our protocol is a straightforward modification of a standard experimental technique, and is especially useful when only limited sample quantities are available.     

Trichalcogenasumanene ortho‐Quinones: Synthesis,Properties, and Transformation into Various Heteropolycycles

The regioselective transformation of heterobuckybowl trichalcogenasumanenes 1 a , b at peripheral butoxy groups afforded trichalcogenasumanene ortho ‐quinones 2 a , b . Compounds 2 a , b are distinct from 1 a , b in terms of their molecular geometry and electronic state; that is, they have a shallower bowl depth and show absorbance in the NIR region. The reaction of 2 a , b with diamines resulted in a variety of heteropolycycles, including molecular spoon 3 a – 6 a , planar π‐systems 3 b – 6 b , and highly twisted [7‐6‐6]‐fused systems 7 a , b . These new heteropolycycles had different optical/electrical properties: 4 a,b showed hole mobility of approximately 0.002 cm² V⁻¹ s⁻¹, 6 a displayed red emission in both solution and the solid state, and 7 a , b formed tight stacks of the curved π‐surface.     

Photochromic reactions of diarylethenes in single crystals with intermolecular O--H...N hydrogen-bonding networks

The crystal structures and photochromic performance of a single crystal of a diarylethene derivative possessing carboxyl groups, 1,2-bis(5-carboxyl-2-methyl-3-thienyl)perfluorocyclopentene (1 a), and cocrystals of 1 a with 4,4'-, 2,4'-, and 2,2'-bipyridines were examined. In crystal 1 a, a discrete cyclic structure was observed, in which four 1 a molecules are linked through hydrogen bonds between the carboxyl groups. In the homocrystal, photoreactive and photoinactive conformers of 1 a exist in the ratio of 1:1. In the cocrystals of 1 a with bipyridines, O--HN-type hydrogen bonds between 1 a and pyridyl groups were formed, and all 1 a molecules are fixed in a photoreactive conformation. Both the homocrystal 1 a and the cocrystals showed photochromic performances, and color variation from bluish-violet to cyan was observed, depending on the conformation of the packed diarylethene molecules.     

CALCULATION OF THE YOUNG''''S MODULUS OF AN ADSORBED POLYMER LAYER

Polymer layers adsorbed to a surface or in a confined environment often change their mechanical properties. There is even the possibility of solidification of the confined layer. To judge the stiffness of such a layer, we used the Hertz model to calculate the Young's modulus of the polymer layer in the confinement of AFM experiments with silicon nitride tip with a radius of curvature of R≈50 nm and a glass sphere attached to the cantilever R = 5μm. Since there is no visible indentation of the layer in the AFM experiments, the layer is either penetrated very easily, or the indentation is too small to be seen in a force curve. The latter would be the case for a polymer layer with a Young's modulus above 4×108 Pa in case of an experiment with a silicon nitride tip and 4×105 Pa in case of a glass sphere.     

Single Quality Factor for Enthalpy-Entropy Compensation,Isoequilibrium and Isokinetic Relationships

Enthalpy-entropy compensation (EEC) is very often encountered in chemistry, biology and physics. Its origin is widely discussed since it would allow, for example, a very accurate tuning of the thermodynamic properties as a function of the reactants. However, EEC is often discarded as a statistical artefact, especially when only a limited temperature range is considered. We show that the likeliness of a statistical origin of an EEC can be established with a compensation quality factor (CQF) that depends only on the measured enthalpies and entropies and the experimental temperature range. This is directly derived from a comparison of the CQF with threshold values obtained from a large number of simulations with randomly generated Van ‘t Hoff plots. The value of CQF is furthermore a direct measure of the existence of a genuine isoequilibrium or isokinetic relationship.     

Solid-phase synthesis of 5-arylhistidines via a microwave-assisted Suzuki-Miyaura cross-coupling

Microwave irradiation efficiently promoted the solid-phase Suzuki-Miyaura reaction of a 5-bromohistidine with various arylboronic acids in the presence of a palladium catalyst. This methodology allowed the synthesis of peptides bearing a histidine residue substituted at position 5 of the imidazole ring with a phenyl, a substituted phenyl, a pyridyl, or a thienyl ring, as well as with the benzene ring of a tyrosine residue.     

Reactions of Ruthenium–Allenylidene Complexes Tethering a Cyclopropyl Group

Two cyclopropyl allenylidene complexes [Ru]=CCC(R)(C₃H₅) ([Ru]=[RuCp(PPh₃)₂], Cp=Cyclopentadienyl; R=thiophene ( 2a ) and R=Ph ( 2b )) are prepared from the reactions of [Ru]Cl with the corresponding 1‐cyclopropyl‐2‐propyn‐1‐ol in the presence of KPF₆. Thermal treatment, halide‐anion addition, and palladium‐catalyzed reactions of 2a and 2b all lead to a ring expansion of the cyclopropyl group, giving the vinylidene complexes 4a and 4b , respectively, each with a five‐membered ring. This ring expansion proceeds by C C bond formation between Cβ of the cumulative double bond and a methylene group of the cyclopropyl ring. In the reaction of 2a with pyrrole, consecutive formation of two C C bonds, one between C‐2 of pyrrole and Cγ of 2a and the other between C‐3 of pyrrole and Cα, results in the formation of 6a . The reaction proceeds by addition of pyrrole and 1,3‐proton shifts. The hydrogenation of 2a by NaBH₄ is carried out in different solvents. The cumulative double bonds are reduced regioselectively to give a mixture of 7a and 8a . Interestingly, use of different solvents leads to different ratios of 7a and 8a . Presence of a protic solvent like methanol in dichloromethane or chloroform solution increases the yield of 8a , thus revealing that both the rates of hydroboration and deboronation increase. The structures of two new complexes 4a and 6a have been firmly established by X‐ray diffraction analysis.     

Solid‐State Hierarchical Cyclodextrin‐Based Supramolecular Polymer Constructed by Primary,Secondary, and Tertiary Azido Interactions

The crystallization of a di‐azido‐α‐cyclodextrin revealed a polymeric self‐assembly involving a variety of azido‐type interactions. The crystal arrangement relies on the cooperativity of a primary azido inclusion, a secondary azido–azido interaction involving an unprecedented distribution of canonical forms, and a tertiary azido–groove interaction. The second azido group brings in a major contribution to the supramolecular structure illustrating the benefit of a difunctionalization for the generation of hierarchy.     

Concise Total Synthesis of Enigmazole A

An efficient entry into the phosphorylated marine macrolide enigmazole A is described. Enigmazole A interferes with c‐Kit signaling by an as yet unknown mode of action and is therefore a potential lead in the quest for novel anticancer agents. Key to success is a gold‐catalyzed cascade comprising a [3,3]‐sigmatropic rearrangement of a propargyl acetate along the periphery of a macrocyclic scaffold, followed by a transannular hydroalkoxylation of the resulting transient allenyl acetate. This transformation mandated the use of a chiral gold catalyst to ensure a matching double‐asymmetric setting. Other noteworthy steps are the preparation of the oxazole building block by a palladium‐catalyzed C?H activation, as well as the smooth ring‐closing alkyne metathesis of a diyne substrate bearing a propargylic leaving group, which has only little precedent.     

Total synthesis and biological evaluation of (-)apicularen A and analogues thereof

Apicularen A (1) and related benzolactone acylenamines belong to a growing class of novel natural products possessing highly cytotoxic properties. The challenging structure of 1 includes a 10-membered macrolactone ring, a tetrahydropyran system, an o,m-substituted phenol and a doubly unsaturated acyl group attached on the side chain enamine functionality. The total synthesis of apicularen A described herein involves a strategy equivalent to its proposed biosynthesis and entails a reiterative two-step procedure featuring allylation and ozonolytic cleavage to grow the molecule's chain by one acetate unit at a time. The developed synthetic technology was applied to the construction of a series of apicularen A analogues whose biological evaluation established a set of structure-activity relationships in this new area of potential importance in cancer chemotherapy.