Lower rim 1,3-di-amide-derivative of calix[4]arene possessing bis-{N-(2,2′-dipyridylamide)} pendants: a dual fluorescence sensor for Zn and Ni

Single crystal XRD structure of the lower rim 1,3-di-amide-derivative of calix[4]arene possessing bis-{N-(2,2′-dipyridylamide)} pendants (L) exhibit two distinct binding cores, viz., N₄ and O₆. L was found to be selective for Zn²⁺ by switch-on and for Ni²⁺ by switch-off fluorescence by forming 1:1 complexes. The binding and the composition of the complex formed have been addressed based on steady state and time-resolved fluorescence spectroscopy in addition to the absorption and ESI MS. As L can detect Zn²⁺ and Ni²⁺ to a concentration as low as 142 and 203 ppb, respectively, L can be a very sensitive molecular probe for these ions. The coordination details of the metal ion-bound complexes have been addressed based on ab initio calculations showing that the stabilization energies are commensurate with the coordination formed.     

Vanillin-coumarin hybrid molecule as an efficient fluorescent probe for trace level determination of Hg(II) and its application in cell imaging

An efficient Hg²⁺ selective fluorescent probe (vanillin azo coumarin, VAC) was synthesized by blending vanillin with coumarin. VAC and its Hg²⁺ complex were well characterized by different spectroscopic techniques like ¹H NMR, QTOF-MS ES⁺, FTIR and elemental analysis as well. VAC could detect up to 1.25 μM Hg²⁺ in aqueous methanol solution through fluorescence enhancement. The method was linear up to 16 μM of Hg²⁺. Negative interferences from Cu²⁺, Ni²⁺, Fe³⁺, and Zn²⁺ were eliminated using EDTA as a masking agent. VAC showed a strong binding to Hg²⁺ ion as evident from its binding constant value (2.2 × 10⁵), estimated using Benesi-Hildebrand equation. Mercuration assisted restricted rotation of the vanillin moiety and inhibited photoinduced electron transfer from the O, N-donor sites to the coumarin unit are responsible for the enhancement of fluorescence upon mercuration of VAC. VAC was used for imaging the accumulation of Hg²⁺ ions in Candida albicans cells.     

Preparation,spectroscopic characterization and X-ray crystal and molecular structures of nickel(II), copper(II) and zinc(II) complexes of the Schiff base formed from isatin and S-methyldithiocarbazate (Hisa-sme)

Complexes of general formula, [M(isa-sme)₂] · n(solvate) [M = Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺; isa-sme = monoanionic form of the Schiff base formed by condensation of isatin with S-methyldithiocarbazate; n = 1 or 1.5; solvate = MeCN, DMSO, MeOH or H₂O] have been synthesized and characterized by a variety of physicochemical techniques. An X-ray crystallographic structure determination of the [Ni(isa-sme)₂] · MeCN complex reveals a six-coordinate, distorted octahedral geometry. The two uninegatively charged, tridentate, Schiff base ligands are coordinated to the nickel(II) ion meridionally via the amide O-atoms, the azomethine N-atoms and the thiolate S-atoms. By contrast, the crystal structure of [Zn(isa-sme)₂] · MeOH shows a four-coordinate distorted tetrahedral geometry. The two dithiocarbazate ligands are coordinated as N, S bidentate chelates with the amide O-atom not coordinated. The structure of the copper(II) complex [Cu(isa-sme)₂] · DMSO is complicated and comprises two different complexes in the asymmetric unit, one four- and the other five-coordinate. The four-coordinate copper(II) has a distorted (flattened) tetrahedral geometry as seen in the Zn(II) analogue whereas the five-coordinate copper(II) has a distorted square-pyramidal geometry with one ligand coordinated to the copper(II) ion as a tridentate (N, S, O) ligand and the other coordinated as a bidentate N, S chelate. EPR spectroscopy indicates that in solution only one form is present, that being a distorted tetrahedral complex.     

A highly selective turn-on fluorescent chemosensor for copper(II) ion

A new pyrene derivative (1) containing a diaminomaleonitrile moiety exhibits high selectivity for Cu²⁺ detection. Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Fe³⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence values for the system. The apparent association constant (K_a) of Cu²⁺ binding in chemosensor 1 was found to be 5.55×10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5-7.5.     

First generation poly(propyleneimine) dendrimers functionalised with 1,8-naphthalimide units as fluorescence sensors for metal cations and protons

The synthesis of two new green fluorescent poly(propyleneimine) dendrimers from first generation has been described. The new materials are comprised of a 1,8-naphthalimide fluorophore having a substituent at C-4 position. The substituent in the first case is a N,N-dimethylaminoethylamino group while in the second one it is N-methylpiperazine. The spectroscopic and photophysical characteristics of the new dendrimers determined in organic solvent of different polarity have been presented. Both dendrimers show substantial increases in their fluorescence intensity in the presence of metal cations (Zn²⁺, Co²⁺, Ni²⁺, Pb²⁺, Mn²⁺, Cu²⁺, Fe³⁺ and Ag⁺) and protons. The influence of the photoinduced electron transfer on their sensing properties has been discussed.     

Kinetics of the exchange between MnO or Mn3O4 and some divalent cations in aqueous solution

The kinetics of the exchange between MnO or Mn₃O₄ and Co²⁺, Cu²⁺, Ni²⁺, or Zn²⁺ ions in solution, was determined by measuring the γ-activity of⁵⁶Mn acquired by the solution after shaking with the neutron irradiated solid. The results indicated a fast exchange followed by a slower apparently diffusion-controlled exchange. The exchange capacity increased in the series: Co²⁺<Ni²⁺<Cu²⁺=Zn²⁺ for MnO and Ni²⁺<Co²⁺<Zn²⁺<Cu²⁺ for Mn₃O₄. The trends could not be satisfactorily explained by the ionic radii or crystal field stabilisation-energies. In the case of MnO, the results were discussed in terms of the estimated standard enthalpy change of the exchange reaction.     

Phenylethylidene-3,4-dihydro-1H-quinoxalin-2-ones: promising building blocks for Cu recognition

A series of sulfonamido-substituted phenylethylidene-3,4-dihydro-1H-quinoxalin-2-one derivatives in which both of the fluorophore and ionophore are integrated into one structural unit, have been investigated. They all exhibit high selectivity toward Cu²⁺ in ethanol in the presence of other metallic ions (Zn²⁺, Mg²⁺, Co²⁺, Ni²⁺, Mn²⁺, Ca²⁺, and Ag⁺), as well as fast, stable, and reversible binding, as is evidenced by the observation of a red shift in the UV-vis spectrum, ‘ON-OFF’ fluorescence response. In addition, titration and MALDI-TOF measurements indicated that a 1:1 (and possibly also 2:1 (organic ligand: Cu²⁺) complexes were formed, depending on the relative amount of Cu²⁺ added to the solution of the organic ligand. It was also found that the binding constant could be tuned by modifying the nature and position of the substituents attached to the central benzene ring in the quinoxalone derivative. In acetonitrile, unlike in ethanol, these ligands undergo oxidation-decomposition by Cu²⁺ and therefore, no UV-vVis absorption bands could be observed. However, due to color change (from yellow to transparent) they could be useful as dosimeters in this solvent.     

Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

Photoactive chemosensors 4: a Cu protein cavity mimicking fluorescent chemosensor for selective Cu recognition

Fluorescent chemosensor 3 can sense Cu²⁺ ions (1-8 μM) even in the presence of elevated levels of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Ag⁺ and Pb²⁺ (5000 μM). 3 can also analyze for Ag⁺ ions (50-500 μM) in the presence of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ (5000 μM) but Cu²⁺ strongly interferes.     

The effect of ligand donor atoms on ternary complex stability

Formation constants of mixed ligand complexes of Cu²⁺, Zn²⁺, Ni²⁺, Co²⁺, and Mn²⁺,with cyadine-5′-monophosphoric acid (CMP) and various primary ligands such as 1,10-phenanthroline(phen), glycylglycine(glygly) and salicylic acid (sal) have been determined in aqueous solution at 35°C and 0.1 M (KNO₃) by potentiomeric measurements. The acid dissociation constants of all the above mentioned ligands together with their 1 : 1 binary metal complex formation constants were also measured at 35°C. In general all the 1 : 1 binary complexes follow the Irving-Williams order of stability. Further the binary metal complexes of primary ligands are more stable than their ternary complexes with CMP. For ternary complexes, Δ(log K) values seem to change from positive to highly negative as the coordinating atoms of the primary ligands were varied from N,N to N,O^? to O^?O^?. The higher stability of ternary complexes involving phen is due to its Π-bonding interaction with the above metal ions and the relative decrease in the stability of other ternary systems is due to the coulombic repulsion of donor oxygen atoms of primary and secondary ligands. Thus for ternary complexes the stabilities follow a decreasing order of M-phen-CMP > M-glygly-CMP > M-sal-CMP.     

Schiff碱配合物的研究——Ⅸ.表面Schiff碱配合物对H2O2分解的催化作用

制备了两种表面Schiff碱及其Cu²⁺、Co²⁺、Ni²⁺、Zn²⁺配合物,考察了它们对H₂O₂分解的催化性能,其活性顺序为:Co²⁺>Cu²⁺>Ni²⁺>Zn²⁺,且与金属离子氧化还原电位有关。溶液的pH值增加有利于催化反应,有机配体的加入则对反应有所抑制。     

Probing trace Pb(2+) using electrodeposited N,N'-(o-phenylene)-bis-benzenesulfonamide polymer as a novel selective ion capturing film

A novel film modified electrode for the determination of trace lead was developed in this work. The modified electrode was prepared by the electropolymerization of N,N′-(o-phenylene)-bis-benzenesulfonamide (PBSA) as the ion capturing reagent to create the functional film. The modified electrode shows a high selectivity towards Pb²⁺ over interfering cations, e.g. Cu²⁺, Cd²⁺, Co²⁺, Ni²⁺, Zn²⁺, Cr²⁺, and the calibration curve was linear in the concentration range of 2.0 × 10⁻⁹ to 1.0 × 10⁻⁷ M with correlation coefficient of 0.999. For 20 min accumulation, detection limit of 1.0 × 10⁻⁹ M was obtained at the signal to noise ratio of 3. Analytical availability of the modified electrode was demonstrated by the application for samples from pond water.     

Exploiting the deprotonation mechanism for the design of ratiometric and colorimetric Zn fluorescent chemosensor with a large red-shift in emission

The design, synthesis, and photophysical evaluation of a new naphthalimide-based fluorescent chemosensor, N-butyl-4-[di-(2-picolyl)amino]-5-(2-picolyl)amino-1,8-naphthalimide (1), were described for the detection of Zn²⁺ in aqueous acetonitrile solution at pH 7.0. Probe 1 showed absorption at 451 nm and a strong fluorescence emission at 537 nm (Φ_F=0.33). The capture of Zn²⁺ by the receptor resulted in the deprotonation of the secondary amine conjugated to 1,8-naphthalimide so that the electron-donating ability of the N atom would be greatly enhanced; thus probe 1 showed a 56 nm red-shift in absorption (507 nm) and fluorescence spectra (593 nm, Φ_F=0.14), respectively, from which one could sense Zn²⁺ ratiometrically and colorimetrically. The deprotonated complex, [(1-H)/Zn]⁺, was calculated at m/z 619.1800 and measured at m/z 618.9890. In contrast to these results, the emission of 1 was thoroughly quenched by Cu²⁺, Co²⁺, and Ni²⁺. The addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Mn²⁺, Al³⁺, Cd²⁺, Hg²⁺, Ag⁺, and Pb²⁺ produced a nominal change in the optical properties of 1 due to their low affinity to probe 1. This means that probe 1 has a very high fluorescent imaging selectivity to Zn²⁺ among metal ions.     

HYDROLYSIS OF p-NTTROPHENYL PICOLINATE CATALYZED BY ZINC(H) OR NICKEL (II) COMPLEXES OF LONG ALKYL-PYRIDINES WITH HYDROXYL GROUPS IN MICELLAR SOLUTION

The ternary complex kinetic model for metallomicellar catalysis was employed to investigate the effect of Zn²⁺ ion or Ni²⁺ion complexes of long alkyl-pyridines with hydroxyl groups in micellar solution on the hydrolysis of p-nitrophenyl picolinate in this paper. The kinetic and the thermodynamic parameters (K _N, K _r, K _M) were obtained. More worthily, the effect of pH on the hydrolysis of p-nitrophenyl picolinate in metallomicellar phase was discussed quantitatively. The rate constant (K _N) of the hydrolysis of p-nitrophenyl picolinate in metallomicellar phase was obtained and compared with Cu²⁺ ion complex system. The results indicated that Cu²⁺ ion micelle, Ni²⁺ ion micelle and Zn²⁺ ion micelle all exhibited great catalytic effects on the hydrolysis of p-nitrophenyl picolinate. and the order of activity is:Cu²⁺ ion micelle ≥ Ni²⁺ ion micelle ≥ Zn²⁺ ion micell. Moreover, the reasonability of the ternary complex kinetic model was verified further.     

Synthesis of new benzimidazolium salts with tunable emission intensities and their application as fluorescent probes for Fe in pure aqueous media

A series of novel, water-soluble benzimidazolium salts with common ‘fluorophore–spacer–receptor’ PET design has been synthesized. Despite the common PET scaffold these benzimidazolium salts displayed diverse emission intensities in pure aqueous solutions. The observed emission intensities were found to be influenced by the functionalized alkyl side arms present on the benzimidazolium ring. These benzimidazolium salts were also found to act as selective sensors for Fe³⁺ ions over other metal ions like Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Al³⁺, Cr³⁺, Co²⁺, Ni²⁺, Mn²⁺, Zn²⁺, Pb²⁺, Ag⁺, Cu²⁺ and Hg²⁺ in pure aqueous media.     

Transition Metal Ion-binding Properties of a 14-Membered N2O2S2- Macrobicyclic Ligand

The selective liquid–liquid extraction of various transition metal cations from the aqueous phase to the organic phase was carried out using a 14-membered N₂O₂S₂-macrobicycle. Metal picrates such as Pb²⁺, Co²⁺, Zn²⁺, Ni²⁺,Cu²⁺ and Cd²⁺ were used in this extraction studies. It was found that the ligand showed moderate selectivity towards Pb²⁺ only among the other metals. The extraction constant (log K _ex) was determined to be 13.8 for Pb²⁺ complex.     

Synthesis and evaluation of benzothiazolyl and benzimidazolyl asparagines as amino acid based selective fluorimetric chemosensors for Cu

A series of emissive N-tert-butyloxycarbonyl benzyl ester asparagines bearing benzothiazole and benzimidazole units at the side chain, functionalised with electron donor or acceptor groups, were evaluated as novel amino acid based fluorimetric chemosensors for transition metal cations, such as Cu²⁺, Zn²⁺, Co²⁺ and Ni²⁺. Selective removal of the protecting groups at the N- and C-terminals was carried out in order to assess the influence of the presence of blocking groups on the overall coordination ability. The results indicate that there is a strong interaction through the donor N, O and S atoms at the side chain of the various asparagines, with high selectivity towards Cu²⁺ in a 1:1 complex stoichiometry. Association constants and detection limits for Cu²⁺ were calculated. The photophysical and metal ion sensing properties of these asparagines suggest that they can be suitable for incorporation into peptidic chemosensor frameworks.     

Fluorescent chemosensor for Cu2+ ion based on iminoanthryl appended calix[4]arene

Calix[4]arene based podands 1a of cone conformation and 1b of 1,3-alternate conformation possessing imine units and bearing anthracene moieties have been synthesized by a 1 + 2 Schiff base condensation in good yields and examined for their cation recognition abilities towards cations such as lithium, sodium, potassium, nickel, cadmium, copper, zinc, lead, silver and mercury ions by UV–vis and fluorescence spectroscopy. The calix[4]arene derivative 1b shows a selective fluorescence enhancement in presence of Cu²⁺ ions among the various metal ions tested (Li⁺, Na⁺, K⁺, Ni²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Ag⁺ and Hg²⁺ ions). The colour of the solution changes from colourless to light yellow in the presence of Cu²⁺ ions. The stoichiometry of the complex formed between 1b and Cu²⁺ was found to be 1:1 as established by Job’s plot.     

Simple imine linked colorimetric and fluorescent receptor for sensing Zn ions in aqueous medium based on inhibition of ESIPT mechanism

Herein, we report the highly selective binding of Zn²⁺ ion by the salicylaldimine based Schiff base chromogenic receptor 1 [(N,N′-bis (salicylidine)-o-phenylenediamine]. Receptor 1 senses Zn²⁺ ion in aqueous medium by colorimetric and fluorescent response in the presence of other metal ions like Pb²⁺, Hg²⁺, Sn²⁺, Cd²⁺. Receptor 1 on binding with Zn²⁺ ion exhibits fluorescence enhancement which is due to the inhibition of the (ESIPT) mechanism.     

1-(d-Glucopyranosyl-2′-deoxy-2′-iminomethyl)-2-hydroxynaphthalene as chemo-sensor for Fe in aqueous HEPES buffer based on colour changes observable with the naked eye

A new glucose-based C2-derivatized colorimetric chemo-sensor (L₁) has been synthesized by a one-step condensation of glucosamine and 2-hydroxy-1-naphthaldehyde for the recognition of transition metal ions. Among the eleven metal ions studied, viz., Mg²⁺, Ca²⁺, Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Hg²⁺, L₁ results in visual colour change only in the presence of Fe²⁺, Fe³⁺and Cu²⁺ in methanol. However, in an aqueous HEPES buffer (pH 7.2) it is only the Fe³⁺ that gives a distinct visual colour change even in the presence of other metal ions, up to a concentration of 280 ppb. The changes have been explained based on the complex formed, and the composition has been determined to be 2:1 between L₁ and Fe³⁺ based on Job’s plot as well as ESI MS. The structure of the proposed complex has been derived based on HF/6-31G calculations.