Jahn-Teller-distorted dimeric anions in (cat)[Mn2F8(H2O)2]·2H2O (cat = pipzH2, dabcoH2) and (dabcoH2)2[Mn2F8(H2PO4)2]

Using biprotonated dabco (1,4-diazabicyclo[2.2.2]octane) or pipz (piperazine) as counter cations, mixed-ligand fluoromanganates(III) with dimeric anions could be prepared from hydrofluoric acid solutions. The crystal structures were determined by X-ray diffraction on single crystals: dabcoH₂[Mn₂F₈(H₂O)₂]·2H₂O (1), space group P2₁, Z = 2, a = 6.944(1), b = 14.689(3), c = 7.307(1) Å, β = 93.75(3)°, R₁ = 0.0240; pipzH₂[Mn₂F₈(H₂O)₂]·2H₂O (2), space group , Z = 2, a = 6.977(1), b = 8.760(2), c = 12.584(3) Å, α = 83.79(3), β = 74.25(3), γ = 71.20(3)°, R₁ = 0.0451; (dabcoH₂)₂[Mn₂F₈(H₂PO₄)₂] (3), space group P2₁/n, Z = 4, a = 9.3447(4), b = 12.5208(4), c = 9.7591(6) Å, β = 94.392(8)°, R₁ = 0.0280. All three compounds show dimeric anions formed by [MnF₅O] octahedra (O from oxo ligands) sharing a common edge, with strongly asymmetric double fluorine bridges. In contrast to analogous dimeric anions of Al or Fe(III), the oxo ligands (H₂O (1,2) or phosphate (3)) are in equatorial trans-positions within the bridging plane. The strong pseudo-Jahn-Teller effect of octahedral Mn(III) complexes is documented in a huge elongation of an octahedral axis, namely that including the long bridging Mn-F bond and the Mn-O bond. In spite of different charge of the anion in the fluoride phosphate, the octahedral geometry is almost the same as in the aqua-fluoro compounds. The strong distortion is reflected also in the ligand field spectra.     

Yb[N(SO2C8F17)2]3-catalyzed allylation of 1,3-dicarbonyl compounds with allylic alcohols in a fluorous biphase system

Allylation of 1,3-dicarbonyl compounds with allylic alcohols was successfully accomplished using rare earth metal (III) bis(perfluorooctanesulfonyl)imide [RE(NPf₂)₃, RE = La∼Lu] as catalysts in fluorous solvents. Ytterbium bis(perfluorooctanesulfonyl)imide [Yb(NPf₂)₃] catalyzes the high efficient reaction of allylation in fluorous solvents. By simple separation, fluorous phase containing only catalyst can be reused several times.     

Crystal structures of CsFe2S3 and RbFe2S3: synthetic analogs of rasvumite KFe2S3

The isostructural alkali thioferrate compounds CsFe₂S₃, RbFe₂S₃ and KFe₂S₃ have been synthesized by reacting Fe and S with their corresponding AFeS₂ (A=K, Rb, Cs) precursors. The crystal structures of these and binary compounds of intermediate composition were determined by Rietveld analysis of laboratory powder X-ray diffraction patterns. All of the synthesized compounds adopt the space group Cmcm (#63), Z=4 with: a=9.5193(8) Å, b=11.5826(10) Å, c=5.4820(4) Å for CsFe₂S₃; a=9.2202(7) Å, b=11.2429(9) Å, c=5.4450(3) Å for RbFe₂S₃; and a=9.0415(13) Å, b=11.0298(17) Å, c=5.4177(6) Å for KFe₂S₃. These mixed valence alkali thioferrates show regular changes in cell dimensions, AS₁₀ (A=K, Rb, Cs) polyhedron volumes, polyhedron distortion parameters, and calculated oxidation state of Fe with respect to increasing size of the alkali element cation. The calculated empirical oxidation state of iron varies from +2.618 (CsFe₂S₃), through +2.666 (RbFe₂S₃) to +2.77 (KFe₂S₃).     

Crystal structure and magnetic properties of Co2TeO3Cl2 and Co2TeO3Br2

The crystal structures of the two new synthetic compounds Co₂TeO₃Cl₂ and Co₂TeO₃Br₂ are described together with their magnetic properties. Co₂TeO₃Cl₂ crystallize in the monoclinic space group P2₁/m with unit cell parameters a=5.0472(6) Å, b=6.6325(9) Å, c=8.3452(10) Å, β=105.43(1)°, Z=2. Co₂TeO₃Br₂ crystallize in the orthorhombic space group Pccn with unit cell parameters a=10.5180(7) Å, b=15.8629(9) Å, c=7.7732(5) Å, Z=8. The crystal structures were solved from single crystal data, R=0.0328 and 0.0412, respectively. Both compounds are layered with only weak interactions in between the layers. The compound Co₂TeO₃Cl₂ has [CoO₄Cl₂] and [CoO₃Cl₃] octahedra while Co₂TeO₃Br₂ has [CoO₂Br₂] tetrahedra and [CoO₄Br₂] octahedra. The Te(IV) atoms are tetrahedrally [TeO₃E] coordinated in both compounds taking the 5s² lone electron pair E into account. The magnetic properties of the compounds are characterized predominantly by long-range antiferromagnetic ordering below 30 K.     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

Synthesis and structural investigation of the compounds containing HF2 anions: Ca(HF2)2, Ba4F4(HF2)(PF6)3 and Pb2F2(HF2)(PF6)

Three new compounds Ca(HF₂)₂, Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) were obtained in the system metal(II) fluoride and anhydrous HF (aHF) acidified with excessive PF₅. The obtained polymeric solids are slightly soluble in aHF and they crystallize out of their aHF solutions. Ca(HF₂)₂ was prepared by simply dissolving CaF₂ in a neutral aHF. It represents the second known compound with homoleptic HF environment of the central atom besides Ba(H₃F₄)₂. The compounds Ba₄F₄(HF₂)(PF₆)₃ and Pb₂F₂(HF₂)(PF₆) represent two additional examples of the formation of a polymeric zigzag ladder or ribbon composed of metal cation and fluoride anion (MF⁺)_n besides PbF(AsF₆), the first isolated compound with such zigzag ladder. The obtained new compounds were characterized by X-ray single crystal diffraction method and partly by Raman spectroscopy. Ba₄F₄(HF₂)(PF₆)₃ crystallizes in a triclinic space group P1¯ with a=4.5870(2) Å, b=8.8327(3) Å, c=11.2489(3) Å, α=67.758(9)°, β=84.722(12), γ=78.283(12)°, V=413.00(3) Å³ at 200 K, Z=1 and R=0.0588. Pb₂F₂(HF₂)(PF₆) at 200 K: space group P1¯, a=4.5722(19) Å, b=4.763(2) Å, c=8.818(4) Å, α=86.967(10)°, β=76.774(10)°, γ=83.230(12)°, V=185.55(14) ų, Z=1 and R=0.0937. Pb₂F₂(HF₂)(PF₆) at 293 K: space group P1¯, a=4.586(2) Å, b=4.781(3) Å, c=8.831(5) Å, α=87.106(13)°, β=76.830(13)°, γ=83.531(11)°, V=187.27(18) Å³, Z=1 and R=0.072. Ca(HF₂)₂ crystallizes in an orthorhombic Fddd space group with a=5.5709(6) Å, b=10.1111(9) Å, c=10.5945(10) Å, V=596.77(10) Å³ at 200 K, Z=8 and R=0.028.     

Hydrothermal syntheses and structures of the uranyl tellurates AgUO2(HTeO5) and Pb2UO2(TeO6)

Two uranyl tellurates, AgUO₂(HTeO₅) (1) and Pb₂UO₂(TeO₆) (2), were synthesized under hydrothermal conditions and were structurally, chemically, and spectroscopically characterized. 1 crystallizes in space group Pbca, a=7.085(2) Å, b=11.986(3) Å, c=13.913(4) Å, V=1181.5(5) Å³, Z=8; 2 is in P2(1)/c, a=5.742(1) Å, b=7.789(2) Å, c=7.928(2) Å, V=90.703(2) Å³, and Z=2. These are the first structures reported for uranyl compounds containing tellurate. The U⁶⁺ cations are present as (UO₂)²⁺ uranyl ions that are coordinated by O atoms to give pentagonal and square bipyramids in compounds 1 and 2, respectively. The structural unit in 1 is a sheet consisting of chains of edge-sharing uranyl pentagonal bipyramids that are one bipyramid wide, linked through the dimers of TeO₆ octahedra. In 2, uranyl square bipyramids share each of their equatorial vertices with different TeO₆ octahedra, giving a sheet with the autunite-type topology. Sheets in 1 and 2 are connected through the low-valence cations that are located in the interlayer region. The structures of 1 and 2 are compared to those of uranyl compounds containing octahedrally coordinated cations.     

Physical and optical properties of the quaternary sulfides SrCu2MS4 and EuCu2MS4 (M=Ge and Sn)

Four quaternary sulfides SrCu₂MS₄ and EuCu₂MS₄ (M=Ge and Sn) were prepared from a thoroughly ground mixture of EuS or SrS, Cu, or Sn, and S in stoichiometric proportions. Electrical conductivity measurements on pressed pellets showed that all the phases are semiconductors. The optical band gaps were assessed at 2.8 eV for SrCu₂GeS₄, 2.1 eV for SrCu₂SnS₄, 2.2 eV for EuCu₂SnS₄, and 1.6 eV for EuCu₂GeS₄. Both Sr-based compounds present a temperature-independent paramagnetism, of about +135×10⁻⁶ and +92×10⁻⁶ emu/mol, for SrCu₂SnS₄ and SrCu₂GeS₄, respectively. In the case of the europium compounds, they follow a Curie-Weiss dependence above 1.8 K (EuCu₂GeS₄) and above 4 K (for EuCu₂SnS₄), with values of the magnetic effective moment μ_eff and the Curie-Weiss temperature Θ, equal to 6.27 μ_B and −2.8 K for EuCu₂GeS₄, and 6.81 μ_B and +0.7 K, for EuCu₂SnS₄. The experimental magnetic moments confirm that the europium ion is in divalent state, similar to Sr in the related compounds.     

Why pressure induces an abrupt structural rearrangement in PdTe2 but not in PtTe2

High-pressure X-ray diffraction measurements were carried out for polymeric CdI₂-type compounds MTe₂ (M=Pt, Pd) to investigate if they undergo a structural phase transition under pressure as does IrTe₂. Up to 27 GPa at room temperature PtTe₂ does not undergo any structural phase transition. In contrast, however, an abrupt change in the inter-atomic distances occurs in PdTe₂ above 15.7 GPa at room temperature, and above 5 GPa at 300 °C, but the volume vs. pressure curve exhibits no discontinuity. To account for the differences between the isostructural compounds PtTe₂, PdTe₂ and IrTe₂, their electronic structures and bonding were analyzed on the basis of first principles electronic band structure calculations.     

Microwave-assisted selective preparation and characterization of Li21Si5 and Li17Sn4

Two types of intermetallic lithium alloys, Li₂₁Si₅ and Li₁₇Sn₄ (previously Li₂₂Si₅ and Li₂₂Sn₅), were prepared for the first time using microwave-assisted solid-state reaction. The optimum oven power for their preparation is 80-60%, and the irradiation times are 5 min for Li₂₁Si₅ or 10 min for Li₁₇Sn₄. A cheap alumina crucible was found to be the most suitable container in quick (less than 10 min) microwave reactions for Li-containing alloys. The synthesized compounds were characterized by PXRD. Mössbauer spectroscopy was used to characterize Li₁₇Sn₄ under different conditions. The hyperfine interaction parameters of ¹¹⁹Sn in Li₁₇Sn₄ show a typical Li-Sn alloy Sn isomer shift (1.88 mm/s). The oxidization processes of the two intermetallic lithium alloys in air were investigated. The microwave method was found to be simple, fast and efficient, with high selectivity for the preparation of these compounds.     

Syntheses, structures, optical properties, and theoretical calculations of Cs2Bi2ZnS5, Cs2Bi2CdS5, and Cs2Bi2MnS5

Three new compounds, Cs₂Bi₂ZnS₅, Cs₂Bi₂CdS₅, and Cs₂Bi₂MnS₅, have been synthesized from the respective elements and a reactive flux Cs₂S₃ at 973 K. The compounds are isostructural and crystallize in a new structure type in space group Pnma of the orthorhombic system with four formula units in cells of dimensions at 153 K of a=15.763(3), b=4.0965(9), c=18.197(4) Å, V=1175.0(4) Å³ for Cs₂Bi₂ZnS₅; a=15.817(2), b=4.1782(6), c=18.473(3)  Å, V=1220.8(3)  ų for Cs₂Bi₂CdS₅; and a=15.830(2), b=4.1515(5), c=18.372(2) Å, V=1207.4(2) Å³ for Cs₂Bi₂MnS₅. The structure is composed of two-dimensional _∞²[Bi₂MS₅²⁻] (M=Zn, Cd, Mn) layers that stack perpendicular to the [100] axis and are separated by Cs⁺ cations. The layers consist of edge-sharing _∞¹[Bi₂S₆⁶⁻] and _∞¹[MS₃⁴⁻] chains built from BiS₆ octahedral and MS₄ tetrahedral units. Two crystallographically unique Cs atoms are coordinated to S atoms in octahedral and monocapped trigonal prismatic environments. The structure of Cs₂Bi₂MS₅, is related to that of Na₂ZrCu₂S₄ and those of the AMM′Q₃ materials (A=alkali metal, M=rare-earth or Group 4 element, M′= Group 11 or 12 element, Q=chalcogen). First-principles theoretical calculations indicate that Cs₂Bi₂ZnS₅ and Cs₂Bi₂CdS₅ are semiconductors with indirect band gaps of 1.85 and 1.75 eV, respectively. The experimental band gap for Cs₂Bi₂CdS₅ is ≈1.7 eV, as derived from its optical absorption spectrum.     

Preparation of COF2 using CO2 and F2 in the electrochemical cell with PbSnF4 as a solid electrolyte

Tetragonal PbSnF₄ was prepared by precipitation method with Pb(NO₃)₂ and SnF₂ aqueous solutions. The product was characterized using X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XFS), and the other chemical analyses. Tetragonal PbSnF₄ exhibited the highest electric conductivity of 3.2 Sm⁻¹ at 473 K in air as a fluoride ion conductor. We have investigated the possibility of COF₂ formation using CO₂ and F₂ in an electrochemical cell with PbSnF₄ as a solid electrolyte. At same time, we tried to produce an electric power from an electrochemical cell. This CO₂/F₂ electrochemical cell was constructed with a tetragonal PbSnF₄ disk having Au electrodes. The electromotive force was about 0.9 V at room temperature for 0.1 MPa CO₂/(0.01 MPa F₂ + 0.09 MPa Ar). However, the short circuit current density was 0.24 A m⁻², which was quite small. This current density was so small that no fluorocarbon compound was detected after 3 h discharge using FT-IR.     

K2Li(NH2)3 and K2Na(NH2)3—synthesis and crystal structure of two crystal-chemically isotypic mixed-cationic amides

K₂Li(NH₂)₃ (1) was the only crystalline product obtained from the reaction of potassium with dilithium decahydro-closo-decaborate Li₂B₁₀H₁₀ in liquid ammonia at −38 °C. The compound crystallizes in the space group P4₂/m with Z=4, a=6.8720(5) Å, c=11.706(1) Å and V=552.81(7) Å³. The investigated crystal-chemically isotypic sodium compound K₂Na(NH₂)₃ (2) was merohedrally twinned and crystallized from a reaction mixture containing potassium and disodium decahydro-closo-decaborate Na₂B₁₀H₁₀ in liquid ammonia with a=7.0044(5) Å, c=12.362(1) Å and V=606.48(9) Å³. The compounds contain pairs of edge sharing tetraamidolithium or tetraamidosodium tetrahedra which are interconnected by potassium ions forming three-dimensional infinite networks.     

Hf[N(SO2C8F17)2]4-catalyzed Friedel-Crafts acylation in a fluorous biphase system

In a fluorous biphase system, Hf[N(SO₂C₈F₁₇)₂]₄ complex (1 mol %) catalyzes Friedel-Crafts acylation of aromatic compounds such as anisole, toluene and chlorobenzene, and the corresponding aromatic ketones are obtained in satisfactory to high yields. The catalyst is selectively soluble in lower fluorous phase and can be easily recovered by simple phase separation. Furthermore, the catalyst can be reused without decrease of activity in most cases.     

On AgRhO2, and the new quaternary delafossites AgLi1/3M2/3O2, syntheses and analyses of real structures

Two new quaternary delafossite type oxides with the general formula Ag(Li_1/3M_2/3)O₂, M=Rh, Ir, have been synthesized, and their structures characterized. Based on X-ray and electron diffraction analyses the structural similarity with AgRhO₂ delafossite, has been evidenced. The real structures of the quaternary delafossites have been revealed, which has allowed to fully explain the diffuse scattering as observed in X-ray powder diffraction. AgRhO₂ is thermally stable up to 1173 K, the behavior of the two quaternary compounds AgLi_1/3Rh_2/3O₂ and AgLi_1/3Ir_2/3O₂ is comparable, and they decompose above 950 and 800 K, respectively. AgRhO₂ shows temperature independent paramagnetism, while for the other two an effective magnetic moment of 1.77μ_B for Ir, and 1.70μ_B for Rh were determined, applying the Curie-Weiss law. All compounds are semiconducting with activation energies of 4.97 kJ mol⁻¹ (AgLi_1/3Rh_2/3O₂), 11.42 kJ mol⁻¹ (AgLi_1/3Ir_2/3O₂) and 17.58 kJ mol⁻¹ (AgRhO₂).     

Synthesis and properties of the double perovskites La2NiVO6, La2CoVO6, and La2CoTiO6

The double perovskites La₂CoVO₆, La₂CoTiO₆, and La₂NiVO₆, are described. Rietveld fitting of neutron and powder X-ray diffraction data show La₂NiVO₆ and La₂CoVO₆ to have a disordered arrangement of B-cations whereas La₂CoTiO₆ shows ordering of the B-cations (with ∼5% Co/Ti inversion). Curie-Weiss fits to the linear region of the 1/χ plots reveal Weiss temperatures of −107, −34.8, and 16.3 K for La₂CoVO₆, La₂CoTiO₆, and La₂NiVO₆, respectively, and magnetic transitions are observed. La₂CoTiO₆ prepared by our method differs from material prepared by lower-temperature routes. A simple antiferromagnetic spin model is consistent with the data for La₂CoTiO₆. These compounds are semiconductors with bandgaps of 0.41 (La₂CoVO₆), 1.02 (La₂CoTiO₆) and 0.45 eV (La₂NiVO₆).     

Alkaline earth metal poly(hydrogen fluorides) hexafluoroarsenates(V) and hexafluorophosphate(V): M2(H2F3)(HF2)2(AF6) (M = Ca, A = As; M = Sr, A = As, P)

New compounds of the type M₂(H₂F₃)(HF₂)₂(AF₆) with M = Ca, A = As and M = Sr, A = As, P) were isolated. Ca₂(H₂F₃)(HF₂)₂(AsF₆) was prepared from Ca(AsF₆)₂ with repeated additions of neutral anhydrous hydrogen fluoride (aHF). It crystallizes in a space group P4₃22 with a = 714.67(10) pm, c = 1754.8(3) pm, V = 0.8963(2) nm³ and Z = 4. Sr₂(H₂F₃)(HF₂)₂(AsF₆) was prepared at room temperature by dissolving SrF₂ in aHF acidified with AsF₅ in mole ratio SrF₂:AsF₅ = 2:1. It crystallizes in a space group P4₃22 with a = 746.00(12) pm, c = 1805.1(5) pm, V = 1.0046(4) nm³ and Z = 4. Sr₂(H₂F₃)(HF₂)₂(PF₆) was prepared from Sr(XeF₂)_n(PF₆)₂ in neutral aHF. It crystallizes in a space group P4₁22 with a = 737.0(3) pm, c = 1793.7(14) pm, V = 0.9744(9) nm³ and Z = 4. The compounds M₂(H₂F₃)(HF₂)₂(AF₆) gradually lose HF at room temperature in a dynamic vacuum or during being powdered for recording IR spectra or X-ray powder ray diffraction patterns. All compounds are isotypical with coordination of nine fluorine atoms around a metal center forming a distorted Archimedian antiprism with one face capped. This is the first example of the compounds in which H₂F₃⁻ and HF₂⁻ anions simultaneously bridge metal centers forming close packed three-dimensional network of polymeric compounds with low solubility in aHF. The HF₂⁻ anions are asymmetric with usual F?F distances of 227.3-228.5 pm. Vibrational frequency (ν₁) of HF₂⁻ is close to that in NaHF₂. The anion H₂F₃⁻ exhibits unusually small F?F?F angle of 95.1°-97.6° most probably as a consequence of close packed structure.     

Synthesis and crystal structure of new uranyl tungstates M2(UO2)(W2O8) (M=Na, K), M2(UO2)2(WO5)O (M=K, Rb), and Na10(UO2)8(W5O20)O8

The solid-state reactions of UO₃ and WO₃ with M₂CO₃ (M=Na, K, Rb) at 650°C for 5 days result, accordingly the starting stoichiometry, in the formation of M₂(UO₂)(W₂O₈) (M=Na (1), K (2)), M₂(UO₂)₂(WO₅)O (M=K (3), Rb (4)), and Na₁₀(UO₂)₈(W₅O₂₀)O₈ (5). The crystal structures of compounds 2, 3, 4, and 5 have been determined by single-crystal X-ray diffraction using Mo(Kα) radiation and a charge-coupled device detector. The crystal structures were solved by direct methods and Fourier difference techniques, and refined by a least-squares method on the basis of F² for all unique reflections. For (1), unit-cell parameters were determined from powder X-ray diffraction data. Crystallographic data: 1, monoclinic, a=12.736(4) Å, b=7.531(3) Å, c=8.493(3) Å, β=93.96(2)°, ρ_cal=6.62(2) g/cm³, ρ_mes=6.64(1) g/cm³, Z=4; 2, orthorhombic, space group Pmcn, a=7.5884(16) Å, b=8.6157(18) Å, c=13.946(3) Å, ρ_cal=6.15(2) g/cm³, ρ_mes=6.22(1) g/cm³, Z=8, R1=0.029 for 80 parameters with 1069 independent reflections; 3, monoclinic, space group P2₁/n, a=8.083(4) Å, b=28.724(5) Å, c=9.012(4) Å, β=102.14(1)°, ρ_cal=5.83(2) g/cm³, ρ_mes=5.90(2) g/cm³, Z=8, R1=0.037 for 171 parameters with 1471 reflections; 4, monoclinic, space group P2₁/n, a=8.234(1) Å, b=28.740(3) Å, c=9.378(1) Å, β=104.59(1)°, ρ_cal=6.13(2) g/cm³,  g/cm³, Z=8, R1=0.037 for 171 parameters with 1452 reflections; 5, monoclinic, space group C2/c, a=24.359(5) Å, b=23.506(5) Å, c=6.8068(14) Å, β=94.85(3)°, ρ_cal=6.42(2) g/cm³,  g/cm³, Z=8, R1=0.036 for 306 parameters with 5190 independent reflections. The crystal structure of 2 contains linear one-dimensional chains formed from edge-sharing UO₇ pentagonal bipyramids connected by two octahedra wide (W₂O₈) ribbons formed from two edge-sharing WO₆ octahedra connected together by corners. This arrangement leads to [UW₂O₁₀]²⁻ corrugated layers parallel to (001). Owing to the unit-cell parameters, compound 1 probably contains similar sheets parallel to (100). Compounds 3 and 4 are isostructural and the structure consists of bi-dimensional networks built from the edge- and corner-sharing UO₇ pentagonal bipyramids. This arrangement creates square sites occupied by W atoms, a fifth oxygen atom completes the coordination of W atoms to form WO₅ distorted square pyramids. The interspaces between the resulting [U₂WO₁₀]²⁻ layers parallel to plane are occupied by K or Rb atoms. The crystal structure of compound 5 is particularly original. It is based upon layers formed from UO₇ pentagonal bipyramids and two edge-shared octahedra units, W₂O₁₀, by the sharing of edges and corners. Two successive layers stacked along the [100] direction are pillared by WO₄ tetrahedra resulting in sheets of double layers. The sheets are separated by Na⁺ ions. The other Na⁺ ions occupy the rectangular tunnels created within the sheets. In fact complex anions W₅O₂₀¹⁰⁻ are built by the sharing of the four corners of a WO₄ tetrahedron with two W₂O₁₀ dimmers, so, the formula of compound 5 can be written Na₁₀(UO₂)₈(W₅O₂₀)O₈.     

Ion-beam irradiation of lanthanum compounds in the systems La2O3-Al2O3 and La2O3-TiO2

Thin crystals of La₂O₃, LaAlO₃, La_2/3TiO₃, La₂TiO₅, and La₂Ti₂O₇ have been irradiated in situ using 1 MeV Kr²⁺ ions at the Intermediate Voltage Electron Microscope-Tandem User Facility (IVEM-Tandem), Argonne National Laboratory (ANL). We observed that La₂O₃ remained crystalline to a fluence greater than 3.1×10¹⁶ ions cm⁻² at a temperature of 50 K. The four binary oxide compounds in the two systems were observed through the crystalline-amorphous transition as a function of ion fluence and temperature. Results from the ion irradiations give critical temperatures for amorphisation (T_c) of 647 K for LaAlO₃, 840 K for La₂Ti₂O₇, 865 K for La_2/3TiO₃, and 1027 K for La₂TiO₅. The T_c values observed in this study, together with previous data for Al₂O₃ and TiO₂, are discussed with reference to the melting points for the La₂O₃-Al₂O₃ and La₂O₃-TiO₂ systems and the different local environments within the four crystal structures. Results suggest that there is an observable inverse correlation between T_c and melting temperature (T_m) in the two systems. More complex relationships exist between T_c and crystal structure, with the stoichiometric perovskite LaAlO₃ being the most resistant to amorphisation.     

Group 12 metal aryl selenolates. Crystal and molecular structure of [2-(Et2NCH2)C6H4]2Se2 and [2-(Me2NCH2)C6H4Se]2M (M = Zn, Cd)

Diorganodiselenide [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) was obtained by hydrolysis/oxidation of the corresponding [2-(Et₂NCH₂)C₆H₄]SeLi derivative. The treatment of [2-(Et₂NCH₂)C₆H₄]₂Se₂ with elemental sodium in THF resulted in [2-(Et₂NCH₂)C₆H₄]SeNa (2). Reactions between alkali metal selenolates [2-(R₂NCH₂)C₆H₄]SeM′ (R = Me, Et; M′ = Li, Na) and MCl₂ (M = Zn, Cd) in a 2:1 molar ratio resulted in the [2-(R₂NCH₂)C₆H₄Se]₂M species [R = Me, M = Zn (3), Cd (4); R = Et, M = Zn (5), Cd (6)]. The new compounds were characterized by multinuclear NMR (¹H, ¹³C, ⁷⁷Se, ¹¹³Cd) and mass spectrometry. The crystal and molecular structures of 1, 3 and 4 revealed monomeric species stabilized by N → Se (for 1) and N → M (for 3 and 4) intramolecular interactions.