‘Total fluorine’ analysis of seed of Australian Gastrolobium spp. showing temporal, spatial and morphological variation

Alkali-fusion in conjunction with a fluoride selective electrode were used to quantify ‘total fluorine’, being organic fluorine + inorganic fluoride, for the seed of 13 species of Gastrolobium from south-west Western Australia. Intact seed covering spatial and temporal distributions, as well as G. bilobum, G. calycinum and G. parviflorum seed dissected into cotyledons and testa + aril, were analysed. Analysis found significant intra-and inter-species variation, both temporally and spatially, with intact seed concentrations ranging from 1.6 ± 0.3 mg kg⁻¹ in G. spinosum from Mundaring to 1063.9 ± 77.8 mg kg⁻¹ for G. cuneatum from Torbay. Approximately 87% of the ‘total fluorine’ was found to be in the seed cotyledons. Additional analysis detected little inorganic fluoride, indicating the majority of fluorine in the seed is organically bound. Parent compound(s) of the fluorine, seed toxicity and the implications of the results for seed chemical defense are discussed.     

Baker’s yeast (Saccharomyces cerevisiae) mediated transformations of C-aryl-N-phenylnitrones

C-Aryl-N-phenylnitrones are transformed to a mixture of azoxybenzene and aryl aldehydes when treated with a mixture of Baker’s yeast and sucrose in pH = 6.0 phosphate buffer medium at 32 °C.     

Kinetic study of the oxidative addition of methyl iodide to Vaska’s complex in ionic liquids

Oxidative addition of methyl iodide to Vaska’s complex in the ionic liquids 1-butyl-3-methylimidazolium triflate [C₄mim][OTf], [C₄mim] bis(trifluormethylsulfonyl)imide [Tf₂N], and N-hexylpyridinium [C₆pyr][Tf₂N] occurred cleanly to give the expected Ir(III) oxidative addition product. Pseudo-first order rate constants were determined for the oxidative addition reaction in each solvent ([Vaska’s] = 0.25 mM, [CH₃I] = 37.5 mM). The observed rate constants under these conditions were 5-10 times slower than the rate seen in DMF. At high methyl iodide concentrations (>23 mM), the expected first order dependence on methyl iodide was not observed. In each ionic liquid, there was no change in the reaction rates within experimental error over the methyl iodide concentration range of 23-75 mM. At lower methyl iodide concentration, a decrease in rate was observed in [C₄mim][Tf₂N] with decreasing concentration of methyl iodide.     

Utilization of magnetic nanobeads for analyzing haptoglobin in human plasma as a marker of Alzheimer’s disease by capillary electrophoretic immunoassay with laser-induced fluorescence detection

Alzheimer’s disease (AD) is a neurodegenerative disorder resulting from an impaired cholinergic function with loss of cognitive activity in the brain. Haptoglobin is a useful biomarker for AD analysis. Compared to the conventional enzyme-linked immunosorbent assay for haptoglobin analysis, the proposed immunoassay procedure reduces sample analysis time by approximately 55 min. Therefore, immunoassay was coupled with capillary electrophoresis (CE) to determine haptoglobin concentrations indirectly by using magnetic nanobeads (MBs) as a support and laser-induced fluorescence detection. In human plasma sample, the haptoglobin was immobilized on the MBs and reacted with the purified anti-haptoglobin antibody. The optimum separation time for the analyte was shorter than 6 min at 25 °C with a fused-silica capillary column of 40.2 cm × 50 μm ID (effective length 30 cm) and a run buffer containing 25 mM phosphate (pH 8.0) with 0.01% poly(ethylene oxide) (PEO). When using Atto 495 NHS ester as an internal standard (IS) (250.0 ng mL⁻¹), the linear range of the proposed method for indirect determination of haptoglobin was 0.2–3.0 mg mL⁻¹. The method was further used to monitor the course of AD in patients with behavioral and psychological symptoms of dementia (BPSD).     

Comparison of supercritical fluid and Soxhlet extractions for the quantification of hydrocarbons from Euphorbia macroclada

This study compares conventional Soxhlet extraction and analytical scale supercritical fluid extraction (SFE) for their yields in extracting of hydrocarbons from arid-land plant Euphorbia macroclada. The plant material was firstly sequentially extracted with supercritical carbon dioxide, modified with 10% methanol (v/v) in the optimum conditions that is a pressure of 400 atm and a temperature of 50 °C and then it was sonicated in methylene chloride for an additional 4 h. E. macroclada was secondly extracted by using a Soxhlet apparatus at 30 °C for 8 h in methylene chloride. The validated SFE was then compared to the extraction yield of E. macroclada with a Soxhlet extraction by using the Student’s t-test at the 95% confidence level. All of extracts were fractionated with silica-gel in a glass column to get better hydrocarbon yields. Thus, the highest hydrocarbons yield from E. macroclada was achieved with SFE (5.8%) when it compared with Soxhlet extractions (1.1%). Gas chromatography (GC) analysis was performed to determine the quantitative hydrocarbons from plant material. The greatest quantitative hydrocarbon recovery from GC was obtained by supercritical carbon dioxide extract (0.6 mg g⁻¹).     

Experimental validation of an effective carbon number-based approach for the gas chromatography–mass spectrometry quantification of ‘compounds lacking authentic standards or surrogates’

For the quantitative analysis of ‘compounds lacking authentic standards or surrogates’ (CLASS) in environmental media, we previously introduced an effective carbon number (ECN) approach to develop an empirical equation for the prediction of their response factor (RF). In this research, a series of laboratory experiments were carried out to benchmark the reliability of an ECN approach for sorbent tube/thermal desorption/gas chromatography (GC)/mass spectrometry (MS) applications. First, the ECN values were determined using external calibration data from 25 reference volatile organic compounds (VOCs) using two MS dectectors (quadrupole (Q) and time-of-flight (TOF)). Then, a certified standard mixture of 54 VOCs was analyzed by each system as a simulated unknown sample. The analytical bias, assessed in terms of percentage difference (PD) between the certified and ECN-predicted mass values, averaged 19.2 ± 16.1% (TOF-MS) and 28.2 ± 27.6% (Q-MS). The bias using a more simplified carbon number (CN)-based prediction increased considerably, yielding 53.4 ± 53.3% (TOF-MS) and 61.7 ± 81.3% (Q-MS). However, the bias obtained using the ECN-based prediction decreased significantly to yield average PD values of 9.84 ± 7.28% (TOF-MS) and 16.8 ± 8.35% (Q-MS), if the comparison was limited to 26 (out of 54) VOCs with CN ≥ 4 (i.e., 25 aromatics and hexachlorobutadiene).     

Preparation and properties of new ortho-linked polyamide-imides bearing ether, sulfur, and trifluoromethyl linkages

A CF₃-containing diamine, 2,2′-thiobis-[4-methyl(2-trifluoromethyl)4-aminophenoxy) phenyl ether] (DA), was successfully synthesized from 2-2′-sulfide-bis-(4-methyl phenol) and 2-chloro-5-nitrobenzotrifluoride. The sulfur containing diimide-diacid (DIDA) was prepared by condensation reaction of diamine DA and trimellitic anhydride. A series of novel organic-soluble polyamide-imides (PAIs) bearing flexible ether and sulfide links, electron-withdrawing trifluoromethyl groups and ortho-phenylene units were synthesized from DIDA, by direct polycondensation with various aromatic diamines in N-methyl-2-pyrrolidone using triphenyl phosphite and pyridine as a condensing agent in the presence of dehydrating agent (LiCl). The polyamide-imides were obtained in high yields and possessed inherent viscosities in the range of 0.42-0.95 dL g⁻¹. All of the polymers were amorphous in nature, showed outstanding solubility and could be easily dissolved in amide-type polar aprotic solvents (e.g., N-methyl-2-pyrrolidone, N,N-dimethylacetamide, and N,N-dimethylformamide) and even dissolved in less polar solvents (e.g., pyridine and tetrahydrofuran). They showed good thermal stability with glass transition temperatures between 195-245 °C, 10% weight loss temperatures in excess of 485 °C, and char yields more than 50% at 700 °C in nitrogen atmosphere. Moreover, these PAIs possessed low refractive indexes (n = 1.57-1.59) and low birefringence (Δ ≈ 0.02) due to the trifluoromethyl pendent groups and thioether bridged ortho-catenated aromatic rings that interrupt chain packing and increase free volume.     

Selective spectrofluorimetric determination of glutathione in clinical and biological samples using 1,3,5,7-tetramethyl-8-phenyl-(2-maleimide)-difluoroboradiaza-s-indacene

This work reports the development of a selective, sensitive and rapid spectrofluorimetric method for the determination of reduced glutathione (GSH) in the presence of relatively high levels of cysteine (Cys) in clinical and biological samples using 1,3,5,7-tetramethyl-8-phenyl-(2-maleimide)-difluoroboradiaza-s-indacene (TMPAB-o-M). The fluorescence from TMPAB-o-M is strongly quenched by its maleimide moiety, but after reaction with thiol, the fluorescence is restored with a 350-fold intensity increase (fluorescence quantum yield from 0.002 to 0.73). In H₃Cit-Na₂HPO₄ buffer (pH 7.40), the derivatization is completed in just 5 min under 37 °C. The linear range is 0.005-0.2 μmol L⁻¹, with detection limit of 1.1 × 10⁻¹⁰ mol L⁻¹ (signal-to-noise ratio = 3). Almost all amino acids, including Cys, impose no interference even if present at relatively high concentrations (amino acids:GSH = 100:1, Cys:GSH = 1:1, molar ratio, C_GSH = 3 × 10⁻⁷ mol L⁻¹). The sample can be used directly without further treatment after the protein is removed. The developed method is precise with a relative standard deviation (R.S.D.) lower than 5.0% (n = 6) and has been applied to the determination of GSH in human blood and pig’s liver with recoveries between 94.4 and 105.6%.     

Highly efficient,selective and sensitive molecular screening of acetylcholinesterase inhibitors of natural origin by solid-phase extraction-liquid chromatography/electrospray ionisation-octopole-orthogonal acceleration time-of-flight-mass spectrometry and novel thin-layer chromatography-based bioautography

Highly efficient, selective and sensitive molecular screening of natural acetylcholinesterase (AChE) inhibitors was developed and comprised optimized pressurized liquid extraction (PLE) of plant materials followed by highly selective solid-phase extraction (SPE) using Oasis HLB cartridges. Pure alkaloidal fractions were analyzed by a newly developed high-performance liquid-chromatography (HPLC) on a 3 μm Atlantis HILIC silica stationary phase combined with recently introduced electrospray ionisation (ESI) octopole–orthogonal acceleration time-of-flight (oa TOF)-mass spectrometry (MS) with high mass accuracy (about 2 ppm) and high sensitivity (absolute limit of detection (LOD) for galanthamine was about 43 fg at signal-to-noise 13:1). Moreover, a newly developed and validated TLC-bioautography permit galanthamine sensitivities at pg levels. In this way, more potent than galanthamine AChE inhibitor namely 1,2-dihydrogalanthamine in Narcissus jonquilla ‘Pipit’ extract could be found (with IC₅₀ value 0.19 μM lower of about 42% than that of galanthamine).     

Simultaneous distillation-extraction of high-value volatile compounds from Cistus ladanifer L

The present paper describes a procedure to isolate volatiles from rock-rose (Cistus ladanifer L.) using simultaneous distillation-extraction (SDE). High-value volatile compounds (HVVC) were selected and the influence of the extraction conditions investigated. The effect of the solvent nature and extraction time on SDE efficiency was studied. The best performance was achieved with pentane in 1 h operation. The extraction efficiencies ranged from 65% to 85% and the repeatability varied between 4% and 6% (as a CV%).The C. ladanifer SDE extracts were analysed by headspace solid phase microextraction (HS-SPME) followed by gas chromatography with flame ionization detection (GC-FID). The HS-SPME sampling conditions such as fiber coating, temperature, ionic strength and exposure time were optimized. The best results were achieved with an 85 μm polyacrylate fiber for a 60 min headspace extraction at 40 °C with 20% (w/v) of NaCl. For optimized conditions the recovery was in average higher than 90% for all compounds and the intermediate precision ranged from 4 to 9% (as CV %). The volatiles α-pinene (22.2 mg g⁻¹ of extract), 2,2,6-trimethylcyclohexanone (6.1 mg g⁻¹ of extract), borneol (3.0 mg g⁻¹ of extract) and bornyl acetate (3.9 mg g⁻¹ of extract) were identified in the SDE extracts obtained from the fresh plant material.     

One-pot synthesis of difluoromethyl-containing dihydropyrimidinones catalyzed by Yb(PFO)3 under solvent and dehydrating agent free conditions

The difluoromethyl-containing Biginelli dihydropyrimidinone derivatives were synthesized by a one-pot cyclocondensation of ethyl 4,4-difluoroacetoacetate, urea, and a variety of aldehydes in the presence of 5 mol% ytterbium perfluorooctanoate [Yb(PFO)₃] under solvent and dehydrating agent free conditions. The comparison of reaction conditions and products was made among the different 1,3-dicarbonyl substrates (ethyl acetoacetate, ethyl 4,4-difluoroacetoacetate and ethyl 4,4,4-trifluoroacetoacetate) for the Biginelli reaction.     

A reusable capacitive immunosensor for detection of Salmonella spp. based on grafted ethylene diamine and self-assembled gold nanoparticle monolayers

Fabrication of a novel capacitive immunosensor based on grafted ethylene diamine and self-assembled gold nanoparticle monolayer on glassy carbon electrode for the detection of Salmonella spp. is described for the first time. In the present study, the Salmonella spp. monoclonal antibodies (denoted as McAbs) was immobilized on gold nanoparticles. Interaction of McAbs and Salmonella spp. was detected directly using the electrochemical impedance spectroscopy (EIS) technique. The experimental results showed that the concentration of antigen was measured through the relative change in capacitance in the corresponding specific binding of Salmonella spp. and McAbs. Under the optimized conditions, the relative changes in capacitance were proportional to the logarithmic values of Salmonella spp. concentrations in the range of 1.0 × 10² to 1.0 × 10⁵ CFU mL⁻¹ (r = 0.991) with the detection limit of 1.0 × 10² CFU mL⁻¹. The stability of proposed immunosensor could be estimated by determining the relative change in capacitance, which remained almost the same in two months and decreased gradually to 85.3% of initial value after four months’ storage. The used immunosensor could be regenerated repeatedly by immersing in glycine-HCl buffer solution (pH 2.8). Finally, the proposed immunosensor was successfully used for the detection of Salmonella spp. in lab-processed commercial pork samples.     

A lead(II)-selective PVC membrane based on a Schiff base complex of N,N'-bis(salicylidene)-2,6-pyridinediamine

PVC membrane electrodes for lead ion based on N,N’-bis(salicylidene)-2,6-pyridinediamine as membrane carrier were prepared. Among their membranes, a membrane electrode (m-3) containing o-NPOE as a plasticizer and 50 mol% additive displays an excellent Nernstian response (29.4 mV/decade) and the limit of detection of −log a (M) = 6.04 to Pb²⁺ in Pb(NO₃)₂ solutions at room temperature. It has a rapid response time within 10 s over the entire concentration range. The proposed electrode revealed good selectivity and response for Pb²⁺ over a wide variety of other metal ions in a pH 5.0 buffer solutions, and good reproducibility of base line in subsequent measurements.     

Lewis acid catalyzed asymmetric halohydrin reactions of chiral α,β-unsaturated carboxylic acid derivatives with N-halosuccinimide (NXS) as the halogen source

Lewis acid catalyzed asymmetric halohydrin reactions—(halohydroxylation as well as halomethoxylation) of chiral α,β-unsaturated carboxylic acid derivatives were performed using N-halosuccinimide (NXS; X = Br, I) as the halogen source. Regio- and anti-selectivity of 100% and moderate to good diastereoselectivity with good yields were observed when Oppolzer’s sultam was used as the chiral auxiliary. Among the Lewis acids, Yb(OTf)₃ was found to be the best catalyst. Alkenoyl and cinnamoyl substrates smoothly underwent bromohydrin reactions and the more electron-rich cinnamoyl substrates preferred to undergo iodohydrin reactions. However, electron-deficient cinnamoyl substrates did not respond to this Lewis acid catalyzed halohydrin reaction with NXS (X = Cl, Br, I).     

A synthetic diamond probe for both low-energy mammography X-rays and high-energy electron therapy beams

Although diamond has been studied for dosimetry principally due to its near-tissue equivalence, its use in both low-energy X-rays and high-energy electron beams has not been reported. This report is based on dosimetric studies of a synthetic diamond probe when subjected to diagnostic mammography X-ray photons and megavoltage electron therapy beams. The probe, constructed using entirely tissue-equivalent Perspex body, was configured for radiation dose measurement in either ‘edge-on’ or ‘flat-on’ exposure geometry without having first to re-orient the diamond within the body of the detector, and it was designed to be compatible with commercial electrometer systems. The radiation response of the diamond tested showed negligible energy dependence; its minimal background signal, high sensitivity (547.52 nC Gy⁻¹ mm⁻³) and suitability for measurements in small radiation fields of steep dose gradients due to its small size make it suitable for clinical dosimetry. The presented probe has the potential advantage of replacing conventional radiation dosimeters.     

Direct spectrofluorimetric determination of glutathione in biological samples using 5-maleimidyl-2-(m-methylphenyl) benzoxazole

A new thiol fluorescence probe, 5-maleimidyl-2-(m-methylphenyl)benzoxazole (MMPB) has been developed for the direct determination of reduced glutathione (GSH) in real samples. Compared to the reported N-substituted maleimide type of thiol reagents, the main advantage of MMPB is its rather high selectivity for GSH to cysteine (Cys), which often coexists with GSH in biological samples. Under mild conditions similar to the physiological environment, MMPB reacted with GSH to give a highly fluorescent derivative with the excitation and emission wavelengths of 299.2 and 355.8 nm, respectively. In the presence of 0.40-fold (molar ratio) of Cys, a linear relationship was found in the range of 0-1.62×10⁻⁷ mol l⁻¹ with the detection limit (3σ) of 3.23×10⁻¹⁰ mol l⁻¹ for GSH determination. Many other amino acids (100-fold) did not interfere with the determination. Since the molar ratio of Cys to GSH in mammalian tissues and blood does not exceed the value of 0.40:1, the proposed method has been used in the direct determination of GSH in these kinds of biological samples, such as human blood, pig’s liver and heart with the recoveries of 94.3-104.5%     

Supercritical fluid extraction of Beauvericin from maize

Beauvericin (BEA), a supercritical fluid extraction with supercritical carbon dioxide from maize was investigated. Extraction efficiencies under several different extraction conditions were examined. Pressure, temperature, extraction time, organic modifier and water matrix content (10%) were investigated. The best extraction conditions were at a temperature of 60 °C, 3200 psi, for 30 min static extraction time and methanol as modifier solvent. Extraction recovery of 36% without modifier by adding water to the matrix in the extraction vessel (reproducibility relative standard deviations (R.S.D.)=3-5%) were recorded. Extraction recovery of 76.9% with methanol as co-solvent (reproducibility R.S.D.=3-5%) was obtained. Data shows that SFE gives a lower BEA recovery compared to conventional extraction protocol with organic solvents while SFE with modifier and conventional extraction yields are comparable. BEA extract contents were determined by high pressure liquid chromatography (HPLC) with a diode array detector (DAD) at 205 nm and BEA peak confirmed by LC-MS. Acetonitrile-water as mobile phase and column C-18 were both tested. Instrumental and analytical parameters were optimized in the range linear interval from 1 to 500 mg kg⁻¹ and reached a detection limit of 2 ng.     

Comparative analysis of the volatile fraction from Annona cherimola Mill. cultivars by solid-phase microextraction and gas chromatography-quadrupole mass spectrometry detection

The analysis of volatile compounds in Funchal, Madeira, Mateus and Perry Vidal cultivars of Annona cherimola Mill. (cherimoya) was carried out by headspace solid-phase microextraction (HS-SPME) combined with gas chromatography-quadrupole mass spectrometry detection (GC-qMSD). HS-SPME technique was optimized in terms of fibre selection, extraction time, extraction temperature and sample amount to reach the best extraction efficiency. The best result was obtained with 2 g of sample, using a divinylbenzene/carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fibre for 30 min at 30 °C under constant magnetic stirring (800 rpm).After optimization of the extraction methodology, all the cherimoya samples were analysed with the best conditions that allowed to identify about 60 volatile compounds. The major compounds identified in the four cherimoya cultivars were methyl butanoate, butyl butanoate, 3-methylbutyl butanoate, 3-methylbutyl 3-methylbutanoate and 5-hydroxymethyl-2-furfural. These compounds represent 69.08 ± 5.22%, 56.56 ± 15.36%, 56.69 ± 9.28% and 71.82 ± 1.29% of the total volatiles for Funchal, Madeira, Mateus and Perry Vidal cultivars, respectively. This study showed that each cherimoya cultivars have 40 common compounds, corresponding to different chemical families, namely terpenes, esters, alcohols, fatty acids and carbonyl compounds and using PCA, the volatile composition in terms of average peak areas, provided a suitable tool to differentiate among the cherimoya cultivars.     

Taguchi OA16 orthogonal array design for the optimization of cloud point extraction for selenium determination in environmental and biological samples by tungsten-modified tube electrothermal atomic absorption spectrometry

Orthogonal array design (OAD) was applied for the first time to optimize cloud point extraction (CPE) conditions for Se(IV) determination by electrothermal atomic absorption spectrometry (ETAAS) in environmental and biological samples. Selenium was reacted with o-phenylenediamine to form piazselenol in an acidic medium (pH 2). Using Triton X-114, as surfactant, piazselenol was quantitatively extracted into small volume (about 30 μL) of the surfactant-rich phase after centrifugation. Five relevant factors, i.e. surfactant concentration, pH, ionic strength, equilibrium time and temperature were selected and the effects of each factor were studied at four levels on the extraction efficiency of Se(IV) and optimized. The statistical analysis revealed that the most important factors contributing to the extraction efficiency are ionic strength, pH and percent of surfactant. Based on the results obtained from the analysis of variance (ANOVA), the optimum conditions for extraction were established as: pH 6; vial temperature = 50 °C; extraction time = 7 min and 0.3% (w/v) of Triton X-114. The method was permitted to obtain a detection limit of 0.09 ng mL⁻¹ and two linear calibration ranges from 0.6 to 1.0 and 1.0 to 80.0 ng mL⁻¹ Se. The precision (%RSD) of the extraction and determination for the six replicates of Se at 20 ng mL⁻¹ was better than 3.6% and the enrichment factor of 63.5 was achieved. The studied analyte was successfully extracted and determined with high efficiency using cloud point extraction method in water and biological matrices.     

Preconcentration of phthalic acid esters in water samples by Saccharomyces cerevisiae immobilized on silica gel

A sensitive and selective column adsorption method is proposed for the off-line preconcentration and determination of phthalic acid esters (PAEs), namely benzyl-butyl phthalate (BBP), di-n-butyl phthalate (DBP) and di-cyclohexyl phthalate (DCHP). The PAEs was preconcentrated on Saccharomyces cerevisiae immobilized on silica gel and then determined by high performance liquid chromatography (HPLC). Several parameters on the recovery of the analytes were investigated. Recoveries of BBP, DBP and DCHP were 100±2, 98±2 and 98±3%, respectively, at 95% confidence level under optimum conditions. The detection limits (3S/N) of BBP, DBP and DCHP were 3.2, 6.3 and 3.1 μg l⁻¹, respectively. The capacity of the adsorbent was also examined and found to be 1.4 mg g⁻¹ for BBP and DBP, and 3.6 mg g⁻¹ for DCHP. S. cerevisiae immobilized on silica gel is suitable for repeated use without decreasing recovery up to about 25 adsorption-elution cycles. The proposed method was successfully applied to the determination of PAEs in river water with high precision and accuracy.