Spectroscopic and structural characterization of Na2[(VO)2(ttha)]·8H2O (ttha = triethylenetetraamine-N,N,N′,N″,N′″,N′″-hexaacetate): Interpreting the results with density functional theory

Na₂[(V^IVO)₂(ttha)]·8 H₂O (ttha = triethylenetetraamine–N,N,N′,N″,N′″,N′″–hexaacetate ion), prepared by treating [VO(H₂O)₅][(VO)₂(ttha)]·4 H₂O with Na₆(ttha), has been characterized by single crystal X-ray diffraction, infrared spectroscopy, UV–Vis absorption spectroscopy, electron spin resonance spectroscopy, and modeled by density functional theory (DFT). The X-ray structure revealed a distorted octahedral geometry around each vanadium center. The electronic absorption spectrum of [(VO)₂(ttha)]²⁻ (aq) features absorptions at ca. 200 nm (ε > 13900 L mol⁻¹ cm⁻¹), 255 nm (ε = 3480 L mol⁻¹ cm⁻¹), 586 nm (ε = 33 L mol⁻¹ cm⁻¹), and 770 nm (ε = 38 L mol⁻¹ cm⁻¹). The time-dependent density functional theory (TDDFT) calculated electronic absorption spectrum was remarkably similar to the actual spectrum, and TDDFT predicts absorption peaks at 297, 330, 458, 656, and 798 nm. TDDFT assigned the peak at 798 nm to be the α spin HOMO → LUMO transition. Hence, the peak at 770 nm in the actual spectrum is most likely the α spin HOMO → LUMO transition. Moreover, the TDDFT calculations revealed that the α spin HOMO and LUMO are partly comprised of d orbitals on both vanadium centers, and the first derivative electron spin resonance spectrum also suggests that the two unpaired electrons in [(VO)₂(ttha)]²⁻ are localized near the vanadium centers.     

X-ray diffraction studies of two azametallatranes. Peculiarities of structures of N,N′,N″-tris(trimethylsilyl)azametallatranes using DFT calculations

Single crystal structures of N(CH₂CH₂NSiMe₃)₃Si-Vinyl (1) and N(CH₂CH₂NSiMe₃)₃Si-n-Butyl (2) were determined by X-ray diffraction studies: both compounds show weak transannular N_ax→M interactions (1, d(N_ax→Si)=2.712(1) Å, 2, d(N_ax→Ge)=2.743(3) Å). General trends for molecular structures of the group 14 elements (Si, Ge, Sn) azametallatranes are discussed with also included DFT calculations data.     

Synthesis of B-trisubstituted borazines via the rhodium-catalyzed hydroboration of alkenes with N,N′,N″-trimethyl or N,N′,N″-triethylborazine

Hydroboration of terminal and internal alkenes with N,N′,N″-trimethyl- and N,N′,N″-triethylborazine was carried out at 50 °C in the presence of a rhodium(I) catalyst. Addition of dppb or DPEphos (1 equiv.) to RhH(CO)(PPh₃)₃ gave the best catalyst for hydroboration of ethylene at 50 °C, resulting in a quantitative yield of B,B′,B″-triethyl-N,N′,N″-trimethylborazine. On the other hand, a complex prepared from (t-Bu)₃P (4 equiv.) and [Rh(coe)₂Cl]₂ gave the best yield for hydroboration of terminal or internal alkenes.     

Conformation and coordination of β-diketonates in mixed-ligand copper(II) chelates of 1,2-diamines. Theoretical approach and experimental verification. Crystal structure of [bis(N,N′-dimethyl-1,2-diaminoethane) bis(3-cyano-2,4-pentanedionate)copper(II)]dihydrate

The reaction of the bis(2,4-pentanedionato)copper(II), Cu(acac)₂, and its substituted derivatives (Cu(NC-acac)₂, Cu(O₂N-acac)₂, and Cu(tfac)₂), with 1,2-diaminoethane (en), 1,2-diaminopropane (pn) and certain N-substituted derivatives of 1,2-diaminoethane, enR, is reported. The reaction products were found to depend on the reaction conditions, the extent of N-substitution of the diamine and the nature of the β-diketonate anion, β⁻. The [Cu(enR)β₂] addition compounds are not always sufficiently stable and in most instances the tetragonal species [Cu(enR)₂β₂] prevail as the final product. The 1,2-diamine molecules in [Cu(enR)₂β₂] form chelate rings attaining the gauche conformation while the β-diketonato anions essentially confer electrical neutrality. Density functional theory (DFT) calculations suggest that the active sites of the β-diketonato anion and its conformation depend on their ability to create hydrogen bonds and on the substituents in 3-position. The Fukui indices of chemical reactivity favor the carbonyl oxygens as binding sites of most anions while in the case of the 3-cyano-2,4-pentanedionato anion, NC-acac⁻, bonding through the cyano nitrogen is envisaged with the S(E, Z) conformer having the lowest energy. These findings are in accord with experimental data and further proof is given by single crystal X-ray diffraction analysis of the structure of [Cu(MeenMe)₂(NC-acac)₂] · 2H₂O (MeenMe denoting N,N′-dimethyl-1,2-diaminoethane). In this compound the NC-acac⁻ attains the S(E, Z) conformation and interacts with the square-planar entity [Cu(MeenMe)₂]²⁺ through the cyano nitrogen, while intermolecular hydrogen bonding involving the water molecules leads to supramolecular structure.     

Lithiation of 2-(chloroaryl)-2-aryl-1,3-dioxolanes with butyllithium activated by N,N,N′,N″,N″-pentamethyldiethylenetriamine

Intramolecular competition of variously substituted phenyl rings of benzophenone ketals in lithiation reactions proved to be a useful tool to study both ortho-directing ability and long-range effects of the substituents. The regioselectivities observed in the reaction of benzophenone ketals having one or two chloro substituents in one of the aryl rings with butyllithium complexed to N,N,N′,N″,N″-pentamethyldiethylenetriamine demonstrate the significance of both ortho- and meta-acidifying effect of the chloro substituents. The lithio species thus generated were carboxylated resulting in new polysubstituted benzoic acids.     

Synthesis and properties of N,N,N′,N′-tetrasubstituted 1,3-bis(5-aminothien-2-yl)azulenes and their application as a hole-injecting material in organic light-emitting devices

Two title compounds, N,N,N′,N′-tetraphenyl-1,3-bis(5-aminothien-2-yl)azulene (3a) and 1,3-bis{5-(9-carbazolyl)thien-2-yl}azulene (3b), were synthesized from 1,3-di(2-thienyl)azulene (4) by a two-step sequence involving bromination and subsequent Pd-catalyzed amination. These compounds were characterized by spectroscopic analyses and the structure of 3a was determined by X-ray crystallographic analysis. Their HOMO energy levels were estimated using their electrochemical oxidation potentials, and these compounds were used as a hole-injecting material in organic light-emitting devices. The device with 3a showed greater durability than that with copper phthalocyanine.     

Synthesis of N,N,N′,N′-tetrasubstituted 1,3-bis(4-aminophenyl)azulenes and their application to a hole-injecting material in organic electroluminescent devices

After a preliminary search of the reaction conditions for the Suzuki-Miyaura cross-coupling of haloazulenes with arylboronic acids, the title compounds were synthesized either by the direct coupling reaction between 1,3-dihaloazulene and the corresponding N,N-disubstituted 4-aminophenylboronic acids or by a two-step sequence involving the cross-coupling with 4-bromophenylboronic acid and subsequent Pd-catalyzed amination. Application of the title diamines to a hole-injecting material in organic electroluminescent devices was carried out to provide their prominent characteristics as a novel durable, non-cyanine and non-polyamine substance without color fade. The diamine derivatives, extended by an ethynyl unit between the azulenyl core and the 4-aminophenyl moiety, were also synthesized and found, unfortunately, unsuitable for vacuum deposition in preparing a multilayer composite.     

Synthesis, characterization and Schlenk equilibrium studies of methylmagnesium compounds with O- and N-donor ligands - the unexpected behavior of [MgMeBr(pmdta)] (pmdta = N,N,N′,N″,N″-pentamethyldiethylenetriamine)

MgMe₂ (1) was found to react with 1,4-diazabicyclo[2.2.2]octane (dabco) in tetrahydrofuran (thf) yielding a binuclear complex [{MgMe₂(thf)}₂(μ-dabco)] (2). Furthermore, from reactions of MgMeBr with diglyme (diethylene glycol dimethyl ether), NEt₃, and tmeda (N,N,N′,N′-tetramethylethylenediamine) in etheral solvents compounds MgMeBr(L), (L = diglyme (5); NEt₃ (6); tmeda (7)) were obtained as highly air- and moisture-sensitive white powders. From a thf solution of 7 crystals of [MgMeBr(thf)(tmeda)] (8) were obtained. Reactions of MgMeBr with pmdta (N,N,N′,N″,N″-pentamethyldiethylenetriamine) in thf resulted in formation of [MgMeBr(pmdta)] (9) in nearly quantitative yield. On the other hand, the same reaction in diethyl ether gave MgMeBr(pmdta) · MgBr₂(pmdta) (10) and [{MgMe₂(pmdta)}₇{MgMeBr(pmdta)}] (11) in 24% and 2% yield, respectively, as well as [MgMe₂(pmdta)] (12) as colorless needle-like crystals in about 26% yield. The synthesized methylmagnesium compounds were characterized by microanalysis and ¹H and ¹³C NMR spectroscopy. The coordination-induced shifts of the ¹H and ¹³C nuclei of the ligands are small; the largest ones were found in the tmeda and pmdta complexes. Single-crystal X-ray diffraction analyses revealed in 2 a tetrahedral environment of the Mg atoms with a bridging dabco ligand and in 8 a trigonal-bipyramidal coordination of the Mg atom. The single-crystal X-ray diffraction analyses of [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) showed them to be monomeric with five-coordinate Mg atoms. The square-pyramidal coordination polyhedra are built up of three N and two C atoms in 12 and three N and two Br atoms in 13. The apical positions are occupied by methyl and bromo ligands, respectively. Temperature-dependent ¹H NMR spectroscopic measurements (from 27 to −80 °C) of methylmagnesium bromide complexes MgMeBr(L) (L = thf (4); diglyme (5); NEt₃ (6); tmeda (7)) in thf-d₈ solutions indicated that the deeper the temperature the more the Schlenk equilibria are shifted to the dimethylmagnesium/dibromomagnesium species. Furthermore, at −80 °C the dimethylmagnesium compounds are predominant in the solutions of Grignard compounds 4-6 whereas in the case of the tmeda complex7 the equilibrium constant was roughly estimated to be 0.25. In contrast, [MgMeBr(pmdta)] (9) in thf-d₈ revealed no dismutation into [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) even up to −100 °C. In accordance with this unexpected behavior, 1:1 mixtures of 12 and 13 were found to react in thf at room temperature yielding quantitatively the corresponding Grignard compound 9. Moreover, the structures of [MgMeBr(pmdta)] (9c), [MgMe₂(pmdta)] (12c), and [MgBr₂(pmdta)] (13c) were calculated on the DFT level of theory. The calculated structures 12c and 13c are in a good agreement with the experimentally observed structures 12 and 13. The equilibrium constant of the Schlenk equilibrium (2 9c ? 12c + 13c) was calculated to be K_gas = 2.0 × 10⁻³ (298 K) in the gas phase. Considering the solvent effects of both thf and diethyl ether using a polarized continuum model (PCM) the corresponding equilibrium constants were calculated to be K_thf = 1.2 × 10⁻³ and K_ether = 3.2 × 10⁻³ (298 K), respectively.     

Stabilities and coordination modes of histidine in copper(II) mixed-ligand complexes with ethylenediamine,diethylenetriamine or N,N,N′,N″,N″-pentamethyldiethylenetriamine in aqueous solution

Solution equilibrium studies on the Cu(II)–polyamine–histidine ternary systems (polyamine: ethylenediamine (en), diethylenetriamine (dien), N,N,N′,N″,N″-pentamethyldiethylenetriamine (Me₅dien)) have been performed by pH-potentiometry, UV–Vis spectrophotometry and EPR methods. The obtained results suggest the formation of the mixed-ligand complexes with [Cu(A)(His)]⁺ stoichiometry in all studied systems. Additionally, in the systems with dien and Me₅dien protonated [Cu(A)(H–His)]²⁺ species also exists in acid solution. Our spectroscopic results indicate the tetragonal geometry for the [Cu(en)(His)]⁺, the geometry slightly deviated from square pyramidal for the [Cu(dien)(His)]⁺ and strongly deviated from square pyramidal towards trigonal bipyramidal for the [Cu(Me₅dien)(His)]⁺ species. The coordination modes in these mixed-ligand complexes are discussed.     

Synthetic and X-ray diffraction studies of borosiloxane cages [R′Si(ORBO)3SiR′] and the adducts of [BuSi{O(PhB)O}3SiBu] with pyridine or N,N,N′,N′-tetramethylethylenediamine

Eleven borosiloxane [R′Si(ORBO)₃SiR′] compounds where R′ = Bu^t and R = Ph (1), 4-PhC₆H₄ (2), 4-Bu^tC₆H₄ (3), 3-NO₂C₆H₄ (4), 4-CH(O)C₆H₄ (5), CpFeC₅H₄ (6), 4-C(O)CH₃C₆H₄ (7), 4-ClC₆H₄ (8), 2,4-F₂C₆H₃ (9), and R′ = cyclo-C₆H₁₁ and R = Ph (10), and 4-BrC₆H₄ (11) have been synthesized and characterized by spectroscopic (IR, NMR), mass spectrometric and, for compounds where R′ = Bu^t and R = 4-PhC₆H₄ (2), 4-Bu^tC₆H₄ (3), 3-NO₂C₆H₄ (4), CpFeC₅H₄ (6) and 2,4-F₂C₆H₃ (9), X-ray diffraction studies. These compounds contain trigonal planar RBO₂ and tetrahedral R′SiO₃ units located around 11-atom “spherical” Si₂O₆B₃ cores. The dimensions of the Si₂O₆B₃ cores in compounds 2, 3, 4, 6 and 9 are remarkably similar. The reaction between [Bu^tSi{O(PhB)O}₃SiBu^t] (1), and excess pyridine yields the 1:1 adduct [Bu^tSi{O(PhB)O}SiBu^t]. NC₅H₅ (12) while the reaction between 1 and N,N,N′,N′-tetramethylethylenediamine in equimolar amounts affords a 2:1 borosiloxane:amine adduct [Bu^tSi{O(PhB)O}₃SiBu^t]₂ · Me₂NCH₂CH₂NMe₂ (13). Compounds 12 and 13 were characterised with IR and (¹H, ¹³C and¹¹B) NMR spectroscopies and the structure of the pyridine complex 12 was determined with X-ray techniques.     

Synthesis and Structure of Bis(para‐methoxyphenyl)selenoxide and its Monohydrate. Theoretical Considerations of the Hydration of Diorganoselenium Oxides

The title compound was prepared by base hydrolysis of (p‐MeOC₆H₄)₂SeCl₂ in water and isolated as the crystalline monohydrate, (p‐MeOC₆H₄)₂SeO·H₂O, in which the water molecule is associated via hydrogen‐bonding. Water‐free (p‐MeOC₆H₄)₂SeO was obtained crystalline after drying and recrystallisation from toluene. Both crystal phases were investigated by single crystal X‐ray diffraction. Preliminary DFT calculations at the B3LYP/LANL2DZdp level of theory suggest that the hydrogen bonded complexes R₂SeO·H₂O (R = H, Me, Ph) are by 2.79, 3.36 and 11.10 kcal mol^?1 more stable than the corresponding elusive diorganoselenium dihydroxides R₂Se(OH)₂. The hydrogen bond energies of R₂SeO·H₂O (R = H, Me, Ph) are 5.98, 7.18 and 5.89 kcal mol^?1.     

Unexpected formation of the copper(II) dinuclear mixed-ligand species in the ternary system of N,N,N′,N″,N″-pentamethyldiethylenetriamine with methionine- or histidinehydroxamic acids in aqueous solution

Equilibrium studies of the mixed-ligand complexes of the copper(II) ion with pentamethyldiethylenetriamine (N,N,N′,N″,N″-pentamethyl-[bis(2-aminoethyl)amine], Me₅dien) as a primary ligand and methioninehydroxamic acid (2-amino-4-(methylthio)butanehydroxamic acid, Metha) or histidinehydroxamic acid (2-amino-3-(4′-imidazolyl)propanehydroxamicacid, Hisha) as a secondary ligand L were performed by potentiometric titration, UV–Vis and EPR spectroscopy. The results show that in these ternary systems the dinuclear [Cu₂(Me₅dien)L₂H₋₁]⁺ mixed-ligand species is formed as a predominant one in the basic solution. The monouclear [Cu(Me₅dien)L]⁺ species is formed in low concentration. Our spectroscopic results indicate that the geometry of these mixed-ligand five-coordinate complexes is strongly distorted towards trigonal-bipyramidal.     

Aerobic oxidation of trimethylbenzenes catalyzed by N,N′,N″-trihydroxyisocyanuric acid (THICA) as a key catalyst

The oxidation of trimethylbenzenes was examined with air or O₂ using N,N′,N″-trihydroxyisocyanuric acid (THICA) as a key catalyst. Thus, 1,2,3-, 1,2,4-, and 1,3,5-trimethylbenzenes under air (20 atm) in the presence of THICA (5 mol %), Co(OAc)₂ (0.5 mol %), Mn(OAc)₂, and ZrO(OAc)₂ at 150 °C were oxidized to the corresponding benzenetricarboxylic acids in good yields (81-97%). In the aerobic oxidation of 1,2,4-trimethylbenzene by the THICA/Co(II)/Mn(II) system, remarkable acceleration was observed by adding a very small amount of ZrO(OAc)₂ to the reaction system to form 1,2,4-benzenetricarboxylic acid in excellent yield (97%). In contrast, no considerable addition effect was observed in the oxidation of 1,3,5-trimethylbenzene. This aerobic oxidation by the present catalytic system provides an economical and environmentally benign direct method to benzenetricarboxylic acids, which are very important polymer materials.     

N,N′,N″-Tri-Boc-guanidine (TBG): a common starting material for both N-alkyl guanidines and amidinoureas

In this Letter, we describe the unexpected reaction pattern of N,N′N″-tri-Boc-guanidine (TBG) with amines at room temperature and under reflux conditions affording N-substituted guanidines and amidinoureas, potentially important compounds with extensive applications in medicinal chemistry. This investigation shows that TBG is an excellent, readily available common starting material for the synthesis of various N-alkyl guanidines as well as N-alkyl-N′-substituted amidinoureas by simply manipulating the reaction conditions.     

Bis(trifluoromethyl)dicarbonate, CF3OC(O)OC(O)OCF3

The synthesis of the new compound, bis(trifluoromethyl)dicarbonate, CF₃OC(O)OC(O)OCF₃, is carried out by reduction of bis(trifluoromethyl)trioxidicarbonate with excess of CO at 0 °C. The product is characterized by IR, Raman, ¹³C and ¹⁹F NMR spectroscopy and its properties are compared with those of the other members of the series CF₃OC(O)O_xC(O)OCF₃, x = 0-3. Single crystals are grown at −25 °C and the X-ray diffraction analysis shows the packing of syn-syn rotamers exhibiting C₂ symmetry. DFT calculations predict this rotamer as the most stable one and also structural and vibrational data are predicted reasonably well.     

Syntheses,structures and electrochemistry of manganese(III) complexes derived from N,N′-o-phenylenebis(3-ethoxysalicylaldimine): Efficient catalyst for styrene epoxidation

Syntheses, characterizations, electrochemistry and catalytic properties for styrene epoxidation of three manganese(III) compounds [Mn^IIIL¹(H₂O)(MeOH)](ClO₄) (1) [Mn^IIIL¹(N₃)(H₂O)]·dmf (2) [Mn^IIIL¹(Cl)(H₂O)] (3) derived from the Schiff base compartmental ligand N,N′-o-phenylenebis(3-ethoxysalicylaldimine) (H₂L¹) are reported. The three compounds are characterized by elemental analyses, IR, mass and UV–Vis spectra and conductance values. Single crystal X-ray structures of 1 and 2 have been determined. The structures of 1 and 2 show that these are mononuclear compounds having a salen type structure. In both structures, a dinuclear species is formed by bifurcated hydrogen bonding involving coordinated water molecule. The coordination of chloride in 3 is shown by conductance measurements. The compounds have also been characterized by UV–Vis and mass spectroscopic studies. Cyclic voltammetric and square wave voltammetric studies of the three compounds reveal that these undergo Mn(III)/Mn(II) reduction reversibly with the order of the ease of reduction as 3 > 2 > 1. This order has been explained proposing the composition of active species in solution. Catalytic properties for epoxidation of styrene by all the three complexes using PhIO and NaOCl as oxidant have been studied. The order of both the styrene conversion and styrene epoxidation using the three title compounds is 3 > 1 > 2. Again, it has been observed that more efficient conversion and epoxidation take place when PhIO is used as oxidant.     

Catalytic photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine and carbon dioxide

Photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine (TMB) in MeCN under bubbling of CO₂ proceeded with high catalytic efficiency, giving 3,3-diphenylacrylic acid (DPA) and 3-hydroxy-3,3-diphenylpropionic acid (20). The turnover number (TON=(DPA+20)/TMB) reached 17. Similarly, 1-phenyl-1-cyclohexene yielded cis-2-acetamido-2-phenylcyclohexanecarboxylic acid with TON 5.9. As compared with related N,N-dimethylaniline derivatives, TMB is more resistant to photodecomposition, has the much larger absorbance in the S₀→S₁ transition, and has the lower quenching efficiency by CO₂. Probably these factors are partly responsible for the high TON observed for TMB.     

Complexes derived from the copper(II)/succinamic acid/N,N′,N″-chelate tertiary reaction systems: Synthesis,structural and spectroscopic studies

The use of succinamic acid (H₂sucm) in Cu^II/N,N′,N″-donor [2,2′:6′,2″-terpyridine (terpy), 2,6-bis(3,5-dimethylpyrazol-1-yl)pyridine (dmbppy)] reaction mixtures yielded compounds [Cu(Hsucm)(terpy)]_n(ClO₄)_n (1), [Cu(Hsucm)(terpy)(MeOH)](ClO₄) (2), [Cu₂(Hsucm)₂(terpy)₂](ClO₄)₂ (3), [Cu(ClO₄)₂(terpy)(MeOH)] (4), [Cu(Hsucm)(dmbppy)]_n(NO₃)_n·3nH₂O (5^.3nH₂O), and [CuCl₂(dmbppy)]·H₂O (6·H₂O). The succinamate(−1) ligand exists in four different coordination modes in the structures of 1–3 and 5, i.e., the μ₂-κO:κO′:κO″ in 1 and 5 which involves asymmetric chelating coordination of the carboxylato group and ligation of the amide O-atom leading to 1D coordination polymers, the μ₂-κ²O:κO′ in 3 which involves asymmetric chelating and bridging coordination of the carboxylato group, and the asymmetric chelating mode in 2. The primary amide group, either coordinated in 1 and 5, or uncoordinated in 2 and 3, participate in hydrogen bonding interactions, leading to interesting crystal structures. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the Hsucm⁻ ligands. The thermal decomposition of complex 5·3nH₂O was monitored by TG/DTG and DTA measurements.