An efficient preparation of 1-phenylsulfonylindolyl methyl sulfoxides using KF/m-CPBA

A variety of 1-phenylsulfonylindolylmethyl sulfides are selectively oxidized to the corresponding sulfoxides using a hitherto unexplored KF/m-CPBA system. A major advantage is the absence of over-oxidation.     

Oxidation of aromatic amines into nitroarenes with m-CPBA

A versatile and highly efficient approach for the synthesis of nitroarenes from aromatic amine using m-CPBA has been developed. This oxidation reaction was operationally straightforward and proceeded to afford products in good isolated yields.     

m-CPBA/TFA: an efficient nonmetallic reagent for oxidative coupling of 1,2-diarylethylenes

A mild synthesis of a series of phenanthrenes with different substituents on the phenanthrene ring is described. The method involves intramolecular oxidative coupling of a variety of 1,2-diarylethylene derivatives in the presence of m-chloroperoxybenzoic acid (m-CPBA) in trifluoroacetic acid (TFA) to yield phenanthrenes in high yields. The present approach solves a key step for the synthesis of polycyclic structures related to an alkaloid tylophorine.     

Total synthesis of (±)-brazilin and formal synthesis of (±)-brazilein, (±)-brazilide A using m-CPBA

Total synthesis of (±)-brazilin has been accomplished. m-CPBA epoxidation of allyl alcohol 10 and epoxy opening reaction mediated by m-chlorobenzoic acid, formed in situ as a byproduct, gave advanced intermediate diol 14. O-alkylation and cyclization gave phenol 6 which enabled the formal synthesis of (±)-brazilein and (±)-brazilide A.     

Azodioxy-carbonyl compounds by oxidation of cyclic imines with m-CPBA

This article reports a simple and efficient synthesis of C-nitroso compounds (azodioxy esters or ketones and oximes) through a double oxidation of cyclic imines (4,5-dihydrooxazoles and 3,4-dihydro-2H-pyrroles) with m-CPBA. C-Nitroso derivatives seem to be potential donors of nitric oxide, one of the most powerful biological messenger.     

Conformational analysis of bridgehead-substituted bicyclo[m.m.m]alkanes and bicyclo[8.8.n]alkanes

Conformational analyses of bicyclo[m.m.m]alkanes where m=1-10 and of bicyclo[8.8.n]alkanes where n=1-7 bearing methyl groups on the bridgeheads were carried out using a Monte Carlo search strategy. In the bicyclo[m.m.m]alkane series, greater variability was observed for the inter-bridgehead distance for larger values of m. This suggests that properly substituted bicyclo[8.8.8]hexacosanes or larger ring systems might serve as molecular springs.     

A one-pot sulfide to sulfone oxidation with m-chloroperoxybenzoic acid and sodium permanganate

A synthetic strategy towards [2-(1H-indol-5-yl)-6-morpholin-4-ylpyrimidin-4-yl]methylsulfones is described, utilising m-chloroperoxybenzoic acid and sodium permanganate in a one-pot sulfide-sulfone oxidation.     

Substituent effect of the spin-coupling constant through m-phenylene in m-xylylene and its derivatives

Density functional UB3LYP calculations with the broken symmetry approach and spin-projection method on m-xylylene diradical and its derivatives have been performed to investigate the dependence of the spin-coupling constant through m-phenylene on the number of phenyl substituents on the two radical sites. The results show that the coupling constant (or the singlet-triplet gap) steadily decreases on increasing the number of phenyl substituents on the two radical sites. This trend is ascribed to more spin delocalization into the phenyl substituents and the larger twist angle of the phenyl substituents out of the m-phenylene plane when the degree of phenyl substitution is increased. For Schlenk's hydrocarbon, the coupling constant J is 1.52 kcal/mol, only one quarter of that in the parent m-xylylene.     

A general and selective zinc-catalyzed oxidation of sulfides to sulfoxides

A general zinc-catalyzed oxidation of sulfides to sulfoxides has been developed. All the reactions proceeded at room temperature. Hydrogen peroxide was used as a green oxidant. Twenty-one examples of sulfoxides were prepared in moderate to excellent yields.     

Synthesis and structures of polychalcogenadistannabicyclo[k.l.m]alkanes

Reaction of steric encumbered trichlorostannane with disodium sulfide or dilithium selenide gave 2,4-dimercapto-1,3,2,4-dithiadistannetane or tetraselenadistannabicyclo[2.1.1]hexane, respectively. Reactions of steric encumbered trihydrostannane with elemental chalcogens gave pentachalcogenadistannabicyclo[k.1.1]heptanes (k = 2 and 3). The two bridgehead tin atoms of the first polychalcogenadistannabicyclo[k.l.m]alkanes are concluded to have no significant bonding interaction, judging from the longer bond distances than those of the normal tin-tin single bonds.     

Chemical oxidative polymerization of m-phenylenediamine and its derivatives using aluminium triflate as a co-catalyst

Aromatic diamine monomers, including m-phenylenediamine (mPD), 2-methyl-m-phenylenediamine (2Me-mPD), 4-methyl-m-phenylenediamine (4Me-mPD) and trimethyl-m-phenylenediamine (tMe-mPD), were polymerized by chemical oxidation using ammonium persulfate as an oxidant. Aluminium triflate (Al(OTf)₃) was also used for the first time as a co-catalyst under various polymerization conditions. The polymerization yield was improved when Al(OTf)₃ was introduced to the polymerization reaction for most polymers. The poly(2-methyl-m-phenylenediamine) (P(2Me-mPD)), poly(4-methyl-m-phenylenediamine) (P(4Me-mPD)) and poly(trimethyl-m-phenylenediamine) (P(tMe-mPD)) polymers exhibited better solubility than poly(m-phenylenediamine) (P(mPD)) polymers in most common solvents. The homopolymers obtained were characterized by FT-IR, ¹H and ¹³C NMR, WAXD and TGA. The results showed that the yield, solubility and structure of the polymers are significantly dependent on the polymerization conditions. TGA measurements indicated that the polymers have good thermal stability and decompose above 400 °C in nitrogen.     

The stability of poly(m-carborane-siloxane) elastomers exposed to heat and gamma radiation

Poly(m-carboranyl-siloxane) elastomers containing a mixture of di-methyl- and methylphenyl-silyl units were synthesised using the ferric chloride catalysed condensation reaction between di-chloro-diorganosilane and bis(di-methylmethoxysilyl)-m-carborane. These elastomeric materials were originally developed to have greater stability to extreme thermal environments and retain tailorable physical and chemical properties relative to comparable non-carborane containing elastomers. Prepared samples were aged either by heating in air at elevated temperatures or by gamma irradiation from a ⁶⁰Co source. Multinuclear (¹H, ¹³C and ¹¹B) solid and solution state nuclear magnetic resonance (NMR) was used to assess degradation. This included measurements of segmental chain dynamics using a solid-echo pulse sequence reflecting changes in crosslink density and assessing changes to the carborane fragment by ¹¹B and ¹H Magic Angle Spinning (MAS) methods. Thermogravimetric measurements were also performed to assess thermal stability. Gamma radiation (to a dose of 1 MGy) was found to induce only a small degree of elastomer hardening as evidenced by a reduction in segmental chain dynamics. The carborane cage however, remained intact at these dose levels. Thermal degradation was observed to lead to oxidative crosslinking, the degree of which is dependent on temperature. At temperatures below 350 °C, only small changes in segmental dynamics were observed commensurate with only minor weight loss at this temperature. At temperatures above 350 °C, the degradation of the elastomer increased dramatically with decreased segmental dynamics and presumed partial oxidation of the carborane cage. The integrity of the m-carborane cage and the segmental dynamics were found to be significantly reduced at temperatures above 580 °C, in line with the known cage rearrangement temperature for icosahedral carboranes.     

Anodic synthesis of a conducting polymer deriving from m-methoxytoluene

The electropolymerization of m-methoxytoluene is studied in acetonitrile on a platinum anode. In the voltammetric study, a growing film of polymer is deposited on the electrode when sweeping the potential repetitively about the anodic peak. The modified electrode remains conducting after several cycles. Furthermore, in the chronoamperometric analysis, an oscillating current is observed. In the preparative electrolysis, two types of polymer are obtained, the first is soluble and the second is a deposit, insoluble in most usual solvents. Both give very similar results in IR and NMR spectroscopic analysis, which are in agreement with meta-linked aromatic rings. The polymer is photoluminescent and has maximum emission peaks situated in the near IR region.     

Selective oxidation of glycosyl sulfides to sulfoxides using magnesium monoperoxyphthalate and microwave irradiation

A protocol that uses moist magnesium monoperoxyphthalate (MMPP) as an oxidant under microwave irradiation rapidly yields a variety of glycosyl sulfoxides from corresponding sulfides in high yields with high selectivity.     

Synthesis and antitumor activity of 2-(m-substituted-benzoyl)baccatin III analogs from taxinine

2-m-Azidobenzoyl and 2-m-chlorobenzoyl baccatin III analogs were prepared from taxinine, a major component in Japanese yew leaves. In this study, a novel acetyl migration from 13- to 4-hydroxyl group was observed. The antitumor activity of these compounds was evaluated.     

Efficient synthesis of trisubstituted alkenes in an aqueous-organic system using a versatile and recyclable Rh/m-TPPTC catalyst

We have found that the use of [Rh(cod)OH]₂ associated with the water-soluble ligand m-TPPTC was highly efficient for the Rh-catalyzed arylation of alkynes. Aryl and alkyl alkynes were transformed to alkenes using 3 mol % rhodium catalyst and 2.5 equiv of boronic acid at 100 °C in a biphasic water/toluene system in 80-99% yield. The reaction was found to be totally regioselective for alkyl arylalkynes and alkyl silylated alkynes. The Rh/m-TPPTC system was for the first time recycled with no loss of the activity and with excellent purity of the desired alkene.     

Infrared spectra of p-, m- and o-fluorobenzaldehyde in low temperature argon matrices

Three structural isomers of fluorobenzaldehyde (p-, m- and o-forms) have been investigated in detail with matrix-isolation infrared spectroscopy, in the 700-3000 cm⁻¹ region, combined with the UV photoexcitation and the density functional calculations. Two rotamers (syn and anti) were identified for m- and o-fluorobenzaldehyde upon the photoexcitation and most of the bands of each rotamer were assigned. It is shown that the formation of the intramolecular C-H?F hydrogen bond for the anti rotamer of o-FB results in the shortening of the aldehyde C-H bond length and that the C-F and/or CO bond lengths are shortened for the syn rotamer of o-FB presumably due to the repulsion between the aldehyde O and F atoms.     

Chemoselective glycosylation of carboxylic acid with glycosyl ortho-hexynylbenzoates as donors

The gold(I)-catalyzed glycosylation of acid alcohols with glycosyl ortho-hexynylbenzoates in the presence of BF₃·Et₂O and DBU provided the corresponding ester glycosides chemoselectively in high yield; while with DTBP as an additive instead, orthoester formation with the alcohol was effected selectively.     

PhI- and polymer-supported PhI-catalyzed oxidative conversion of ketones and alcohols to α-tosyloxyketones with m-chloroperbenzoic acid and p-toluenesulfonic acid

Various ketones were converted to the corresponding α-tosyloxyketones with mCPBA and p-toluenesulfonic acid in the presence of a catalytic amount of iodobenzene. Moreover, secondary alcohols were directly converted to the corresponding α-tosyloxyketones using mCPBA and catalytic amounts of iodobenzene and potassium bromide, followed by treatment with p-toluenesulfonic acid in a one-pot manner. Poly(4-iodostyrene) could be also used as a recyclable catalyst for the same α-tosyloxylation of ketone     

Cr掺杂的丙烷选择氧化制丙烯酸高效催化剂

在丙烷选择氧化制丙烯酸催化剂MoVTeNbOx的活性相M1基础上掺杂一定量的Cr,当Cr/Nb摩尔比为0.002时,催化剂具有很高的丙烯酸选择性(78.3%)和收率(50.7%);并采用X射线衍射、X射线光电子能谱、程序升温还原、O2程序升温脱附、NH3程序升温脱附和异丙醇氧化等手段对催化剂的构效关系进行了探讨.结果表明,适量Cr的添加可调节催化剂表面Mo6+,V5+和Te4+等物种含量,提高催化剂的氧化能力,使丙烷转化率增加.同时,适量Cr的添加使得催化剂表面酸强度下降,酸性位点数量减少,从而抑制丙烯酸的深度氧化,提高了丙烯酸选择性.