The beta-dialdiminato ligand [{N(C6H3Pri(2)-2,6)C(H)}2CPh]-: the conjugate acid and Li, Al, Ga and In derivatives

The synthesis of the following crystalline complexes is described: [Li(L)(thf)2] (), [Li(L)(tmeda)] (), [MCl2(L)] [M=Al (), Ga ()], [In(Cl)(L)(micro-Cl)2Li(OEt2)2] (), [In(Cl)(L){N(H)C6H3Pri(2)-2,6}] (), [In(L){N(H)C6H3Pri(2)-2,6}2] (), [{In(Cl)(L)(micro-OH)}2] (), [L(Cl)In-In(Cl)(L)] () (the thf-solvate, the solvate-free and the hexane-solvate), [{In(Cl)L}2(micro-S)] () and [InCl2(L)(tmeda)] () ([L]-=[{N(C6H3Pri(2)-2,6)C(H)}2CPh]-). From H(L) (), via Li(L) in Et2O, and thf, tmeda, AlCl3, GaCl3 or InCl3 there was obtained , , , or , respectively in excellent yield. Compound was the precursor for each of , and [{InCl3(tmeda)2{micro-(OSnMe2)2}}] () by treatment with one () or two () equivalents of K[N(H)(C6H3Pri(2)-2,6)], successively Li[N(SiMe3)(C6H3Pri(2)-2,6)] and moist air (), Na in thf (), tmeda (), or successively tmeda and Me3SnSnMe3 (). Crystals of (with an equivalent of In) and were obtained from InCl or thermolysis of [In(Cl)(L){N(SiMe3)(C6H3Pri(2)-2,6)}] () {prepared in situ from and Li[N(SiMe3)(C6H3Pri(2)-2,6)] in Et2O}, respectively. Compound was obtained from a thf solution of and sulfur. X-Ray data for crystalline , , , , , and are presented. The M(L) moiety in each (not the L-free ) has the monoanionic L ligated to the metal in the N,N'-chelating mode. The MN1C1C2C3N2 six-membered M(L) ring is pi-delocalised and has the half-chair (, and ) or boat (, and ) conformation.     

Titanium and niobium imido complexes stabilized by heteroscorpionate ligands

The reaction of [Ti(NR)Cl(2)(py)(3)](R = (t)Bu, p-tolyl, 2,6-C(6)H(3)(i)Pr(2)) with [{Li(bdmpza)(H(2)O)}(4)][bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate] and [{Li(bdmpzdta)(H(2)O)}(4)][bdmpzdta = bis(3,5-dimethylpyrazol-1-yl)dithioacetate] affords the corresponding complexes [Ti(NR)Cl(kappa(3)-bdmpzx)(py)](x = a, R = (t)Bu 1, p-tolyl 2, 2,6-C(6)H(3)(i)Pr(2) 3; x = dta, R =(t)Bu 4, p-tolyl , 2,6-C(6)H(3)(i)Pr(2) 6), which are the first examples of imido Group 4 complexes stabilized by heteroscorpionate ligands. The solid-state X-ray crystal structure of 1 has been determined. The titanium centre is six-coordinate with three fac-sites occupied by the heteroscorpionate ligand and the remainder of the coordination sphere being completed by chloride, imido and pyridine ligands. The complexes are 1-6 fluxional at room temperature. The pyridine ortho- and meta-proton resonances show evidence of dynamic behaviour for this ligand and variable-temperature NMR studies were carried out in order to study their dynamic behaviour in solution. The complexes [Nb(NR)Cl(3)(py)(2)](R = (t)Bu, p-tolyl, 2,6-C(6)H(3)(i)Pr(2)) reacted with [{Li(bdmpza)(H(2)O)}(4)] and (Hbdmpze)[bdmpze = 2,2-bis(3,5-dimethylpyrazol-1-yl)ethoxide], the latter with prior addition of (n)BuLi, to give the complexes [Nb(NR)Cl(2)(kappa(3)-bdmpzx)](x = a, R =(t)Bu 7, p-tolyl 8, 2,6-C(6)H(3)(i)Pr(2) 9; x = e, R = (t)Bu 10, p-tolyl 11, 2,6-C(6)H(3)(i)Pr(2)) 12 and these are the first examples of imido Group 5 complexes with heteroscorpionate ligands. The structures of these complexes have been determined by spectroscopic methods.     

Hydrothermal synthesis, structure, and luminescent properties of selected Zn(II)/Cd(II) coordination polymers constructed from 3,5-bis(x-pyridyl)-1,2,4-triazole (x = 3, 4)

Utilizing 3,5-bis(x-pyridyl)-1,2,4-triazole (x-Hpytz, x = 3; x = 4) as multidentate ligands, six novel coordination polymers with Zn(II) or Cd(II) metal ions were prepared: [Zn(3-pytz)(0.5)(OH)(0.5)Cl](n) (1, 1D ladder), {[Zn(3-Hpytz)(H(2)O)(4)] [Zn(3-Hpytz)(H(2)O)(3)·SO(4)]SO(4)·5H(2)O}(n) (2·5H(2)O, 1D chain), [Cd(3-Hpytz)(SO(4))](n) (3, 3D framework), {[Cd(3-Hyptz)SO(4)·3H(2)O]·2H(2)O}(n) (4·2H(2)O, 1D chain), [Zn(4-pytz)Cl](n) (5, 3D framework) and [Zn(2)(4-pytz)(SO(4))(OH)](n) (6, 3D framework). All compounds were obtained from hydrothermal reactions, with the exception of compound 4 which was obtained by solvent diffusion at room temperature. All compounds were characterized by FTIR, elemental analysis and TGA analysis and their structures were determined by X-ray diffraction. All compounds exhibited substantial thermal stability and showed photofluorescent properties that resulted from ligand π-π* transition.     

Coordination Polymers of Zn and Cd Based on Two Isomeric Azine Ligands: Synthesis,Crystal Structures,and Luminescence Properties

Russian Journal of Coordination Chemistry - Metal-organic 1D coordination polymers of Zn(II) and Cd(II), [{Zn(3-Bphz)(H2O)4}(3-Bphz)(NO3)2]n (I), [Zn(3-Bphz)I2]n (II), [Cd(3-Bphz)I2]n (III),...     

Novel triazole-bridged cadmium coordination polymers varying from zero- to three-dimensionality

Cadmium salts with different triazole ligands have led to a series of novel triazole-cadmium compounds varying from zero- to three-dimensionality. [Cd(2)(deatrz)(2)(H(2)O)Br(4)] (1) (deatrz = 3,5-diethyl-4-amino-1,2,4-triazole) is a zero-dimensional complex which uses a triazole ligand together with micro-OH(2) as bridges to form a 1D chain via hydrogen-bonding contacts. [[Cd(3)(deatrz)(2)Cl(6)(H(2)O)(2)].2H(2)O](n) (2), [[Cd(dmtrz)Cl(2)].1.5H(2)O](n)(3) (dmtrz = 3,5-dimethyl-1,2,4-triazole), and [[Cd(3)(deatrz)(4)Cl(2)(SCN)(4)].2H(2)O](n)(4) are polymeric 1D chains. 2 and 4 were constructed via trinuclear cadmium units bridged by triazole ligands and chloride atoms, while 3 consists of micro(2)-Cl, micro(3)-Cl, and triazole bridges, cross-linked by hydrogen bonding to give a 3D framework. [[Cd(3)(dmatrz)(4)(SCN)(6)]](n)(5) (dmatrz = 3,5-dimethyl-4-amino-1,2,4-triazole) shows a two-dimensional structure whose fundamental units are trinuclear metal cations bridged via triazole ligands. The complex [[Cd(dmtrz)(SCN)(2)]](n)(6) is the first three-dimensional example in N1,N2-didentate-bridged triazole-metal compounds. Six complexes exhibit six types of bridging modes of N1,N2-triazole in combination with single-atom bridges. 2, 4, and 5 are the unprecedented examples of polymeric chains and planes constructed via trinuclear metal ion clusters, whereas 3 is the first example of the micro(3)-Cl bridging mode in triazole-metal complexes. We have briefly discussed the variety of dimensionalities based on the tuning of different organic ligands and anions.     

Zinc(II), cadmium(II), mercury(II), and ethylmercury(II) complexes of phosphinothiol ligands

Neutral zinc, cadmium, mercury(II), and ethylmercury(II) complexes of a series of phosphinothiol ligands, PhnP(C6H3(SH-2)(R-3))3-n (n = 1, 2; R = H, SiMe3) have been synthesized and characterized by IR and NMR ((1)H, (13)C, and (31)P) spectroscopy, FAB mass spectrometry, and X-ray structural analysis. The compounds [Zn{PhP(C6H4S-2)2}] (1) and [Cd{Ph2PC6H4S-2}2] (2) have been synthesized by electrochemical oxidation of anodic metal (zinc or cadmium) in an acetonitrile solution of the appropriate ligand. The presence of pyridine in the electrolytic cell affords the mixed complexes [Zn{PhP(C6H4S-2)2}(py)] (3) and [Cd{PhP(C6H4S-2)2}(py)] (4). [Hg{Ph2PC6H4S-2}2] (5) and [Hg{Ph2PC6H3(S-2)(SiMe3-3)}2] (6) were obtained by the addition of the appropriate ligand to a solution of mercury(II) acetate in methanol in the presence of triethylamine. [EtHg{Ph2PC6H4S-2}] (7), [EtHg{Ph2P(O)C6H3(S-2)(SiMe3-3)}] (8), [{EtHg}2{PhP(C6H4S-2)2}] (9), and [{EtHg}2{PhP(C6H3(S-2)(SiMe3-3))2}] (10) were obtained by reaction of ethylmercury(II) chloride with the corresponding ligand in methanol. In addition, in the reactions of EtHgCl with Ph2PC6H4SH-2 and with the potentially tridentate ligand PhP(C6H3(SH-2)(SiMe3-3)) 2, cleavage of the Hg-C bond was observed with the formation of [Hg{Ph2PC6H4S-2}2] (5) and [Hg(EtHg) 2{PhP(O)(C6H3(S-2)(SiMe3-3))2}2] (11), respectively, and the corresponding hydrocarbon. The crystal structures of [Zn3{PhP(C6H4S-2)2}2{PhP(O)(C6H4S-2)2}] (1*), [Cd2{Ph2PC6H4S-2}3{Ph2P(O)C6H4S-2}] (2*), 3, 5, 6, [EtHg{Ph2P(O)C6H4S-2}] (7*), 8, 9, [{EtHg}2{PhP(O)(C6H3(S-2)(SiMe3-3))2}] (10*), and 11 are discussed. The molecular structures of 1, 2, 4, 7, and 10 have also been studied by means of density functional theory (DFT) calculations.     

Hydrothermal and structural chemistry of the zinc(II)- and cadmium(II)-1,2,4-triazolate systems

Hydrothermal reactions of 1,2,4-triazole with zinc and cadmium salts have yielded 10 structurally unique materials of the M(II)/trz/Xn- system, with M(II)=Zn and Cd and Xn-=F-, Cl-, Br-, I-, OH-, NO3-, and SO(4)2- (trz=1,2,4-triazolate). Of the zinc-containing phases, [Zn(trz)2] (1), [Zn2(trz)3(OH)].3H2O (3.3H2O), and [Zn2(trz)(SO4)(OH)] (4) are three-dimensional, while [Zn(trz)Br] (2) is two-dimensional. All six cadmium phases, [Cd3(trz)3F2(H2O)].2.75H2O (5.2.75H2O), [Cd2(trz)2Cl2(H2O)] (6), [Cd3(trz)3Br3] (7), [Cd2(trz)3I] (8), [Cd3(trz)5(NO3)(H2O)].H2O (9.H2O), and [Cd8(trz)4(OH)2(SO4)5(H2O)] (10), are three-dimensional. In all cases, the anionic components Xn- participate in the framework connectivity as bridging ligands. The structural diversity of these materials is reflected in the variety of coordination polyhedra displayed by the metal sites: tetrahedral; trigonal bipyramidal; octahedral. Structures 3, 5, and 7-9 exhibit two distinct polyhedral building blocks. The materials are also characterized by a range of substructural components, including trinuclear and tetranuclear clusters, adamantoid cages, chains, layers, and complex frameworks.     

Rhenium complexes with 2-(diphenylphosphinomethyl)aniline: formation of a cyclic, trinuclear oxorhenium(V) core

Reactions of 2-(diphenylphosphinomethyl)aniline, H(2)L(2), with (NBu(4))[ReOCl(4)] yield different oxo rhenium(V) complexes depending on the conditions applied. This comprises monomeric compounds such as [ReOCl(3)(H(2)L(2))] (1), [ReOCl(2)(OMe)(H(2)L(2))] (2), or [ReO(2)(H(2)L(2))(2)]Cl (5) as well as the dimeric μ-oxo complex [{ReOCl(2)(H(2)L(2))}(2)]O] (3) and the oxo-bridged trimer [{ReOCl(H(2)L(2))}O](3) (4). The latter compound represents the first example of a hitherto unknown trinuclear, cyclic oxo(V) core. [{ReOCl(H(2)L(2))}O](3) contains a tensed 6-membered metallacycle, which readily undergoes rearrangements and reactions with additional ligands. Compounds of the compositions 5 and [ReO(2)(H(2)L(2))(H(2)L(1))]Cl (6) were isolated either from the decomposition of 4 in CH(2)Cl(2)/n-pentane or from reactions with 2-(diphenylphosphino)aniline, H(2)L(1).     

Controllable assembly of metal-directed coordination polymers under diverse conditions: a case study of the M(II)-H3tma/Bpt mixed-ligand system

A series of new metal-organic polymeric complexes, [[Co(bpt)(Htma)(H2O)3].2.25H2O]n (1), [Co(bpt)(Htma)(H2O)]n (2), [Ni(bpt)(Htma)(H2O)]n (3), [Zn(bpt)2(H2tma)2].6H2O (4), [[Cd(bpt)(Htma)(H2O)].(C2H5OH)(H2O)1.5]n (5), and [[Cd(bpt)(Htma)(H2O)2].5.5H2O]n (6), was prepared from solution reactions of 4-amino-3,5-bis(4-pyridyl)-1,2,4-triazole (bpt) and trimesic acid (H3tma) with different metal salts under diverse conditions. All these compounds were structurally determined by X-ray single-crystal diffraction, and the bulk new materials were further identified by X-ray powder diffraction. Complexes 1 and 6 show 1-D zigzag or linear Htma-bridged polymeric chains, with the terminal bpt ligands as pendants, which are extended to 2-D hydrogen-bonded arrays with 4.8(2) or (6,3) network topology. Coordination polymers 2 and 3, in which the 2-D corrugated metal-organic frameworks make the interdigitated 3-D packing, are isostructural. Complex 4 has a mononuclear structure, and its subunits are hydrogen-bonded to each other to give a 2-D grid-like net. For complex 5, the Cd(II) centers are linked by bpt/Htma ligands to form a 2-D (4,4) coordination layer, and these layers are interdigitated in pairs. Notably, secondary noncovalent forces, such as hydrogen bonds, play an important role in extending and stabilizing these structural topologies. Interestingly, distinct products are obtained for Co(II) (1 and 2) and Cd(II) (5 and 6) under ambient or hydrothermal conditions; however, for Ni(II) and Zn(II), single products, 3 and 4, are generated. The thermal stabilities of 1-6 were studied by thermogravimetric analysis of mass loss. The desorption/adsorption properties of the porous material 5 are also discussed. Solid-state luminescent spectra of the Zn(II) and Cd(II) complexes, 4-6, indicate intense fluorescent emissions at ca. 380 nm.     

Ruthenium complexes with tridentate PNX (X = O, S) donor ligands

The ligands, PhPNXMe (1), PhPNXPh (2), and PhPNSMe (3), (PhPNX = 2-Ph2P-C6H4CH[double bond, length as m-dash]NC6H4X-2; X = O, S) have been prepared. A range of new ruthenium complexes were synthesised using these and related ligands, namely: [{RuCl(PhPNO)}2Cl] (4), [Ru(PhPNO)2] (5), [RuCl(PhPNXR)(PPh3)]BPh4 [X = O, R = Me (6); X = O, R = Ph (7); X = S, R = Me (8)], [{RuCl(PhPNX'R)}2Cl]X [X' = O, R = Me, X = Cl(-) (9); X' = S, R = Me, X = BPh4(-) or PF6(-) (10)], and [RuCl(PhPNO-eta 6C6H5)]BPh4 (11). The catalytic activity of these complexes with respect to the hydrosilyation of acetophenone and the hydrogenation of styrene has been investigated, giving an insight into the requirements for an active complex in these reactions.     

Controlling aggregation of copper(II)-based coordination compounds: From mononuclear to dinuclear, tetranuclear, and polymeric copper complexes

The use of a strategy combining ligand design and changes of reaction conditions has been investigated with the goal of directing the assembly of mononuclear, dinuclear, tetranuclear, and polymeric copper(II) complexes. As a result, closely related copper monomers, alkoxo dimers, and hydroxo cubanes, along with a carbonate-bridged polymeric species, have been synthesized using the rigid, aliphatic amino ligands cis-3,5-diamino-trans-hydroxycyclohexane (DAHC), cis-3,5-diamino-trans-methoxycyclohexane (DAMC), and the glutaryl-linked derivative glutaric acid bis-(cis-3,5-diaminocyclohexyl) ester (GADACE). The composition of the monomeric complex has been determined by X-ray crystallography as [Cu(DAHC)2](ClO4)2 (1), the two dimers as [{Cu(DAHC)(OMe)}2](ClO4)2.MeOH (2) and [{Cu(DAMC)(OMe)(ClO4)}2] (3), the three Cu4O4 cubanes as [{Cu(DAHC)(OH)}4](ClO4)(4).2.5MeOH (4), [{Cu(DAMC)(OH)}4](ClO4)4.H2O (5), and [{Cu2(OH)2(GADACE)}2]Cl4.2MeOH.6H2O (6), and an infinite-chain structure as [{Cu(DAHC)(CO3)}n] (7). Furthermore, the cubane structures 4 and 5 have been investigated magnetically. Our studies indicate that formation of the monomeric, dimeric, and tetranuclear DAHC and DAMC complexes can be controlled by small changes in reaction conditions and that further preorganization of the ligand moiety by linking the DAHC cores (GADACE) allows more effective direction of the self-assembly of the Cu4O4 cubane core.     

Synthesis, structure and solution NMR properties of (Ph4P)[M(SeC[O]Tol)3], M = Zn, Cd and Hg

Metal selenocarboxylate salts (PPh4)[M(SeC[O]Tol)3] (M = Zn (1), Cd (2) and Hg (3); Tol = C6H4-p-CH3) have been synthesized by reacting Zn(NO3)2 .6H2O, Cd(NO3)2 .4H2O or HgCl2 with (Na+)TolC[O]Se- and PPh4Cl in the ratio of 1 : 4 : 1. The structures of these compounds were determined by single-crystal X-ray diffraction methods. The crystal structures contain discrete cations and anions. In the each anion, the metal center is bound to three TolC[O]Se ligands, primarily through Se, though some long M...O interactions also occur. NMR spectra (113Cd, 199Hg and 77Se, as appropriate) are reported for solutions of [M(SeC[O]Tol)3]-, and of [M(SeC[O]Tol)3](-) - [M(SC[O]Ph)3]- mixtures (M = Zn-Hg), in CH2Cl2 at reduced temperatures. In addition, ESI-MS data have been obtained for [M(SeC[O]Tol)(3)](-) - [M(SC[O]Ph)3]- mixtures (M = Zn-Hg) in acetone and in CH2Cl2. The NMR and ESI-MS studies show that the complexes [M(SeC[O]Tol)n(SC[O]Ph)(3-n)]- (n= 3-0) persist in solution.     

Metal-organic frameworks incorporating Cu3(mu3-OH) clusters

Interaction of 4,4-bi(1,2,4-triazole) (btr) with copper(II) chloride (bromide) in aqueous or aqueous alcohol media led to a series of coordination polymers featuring the formation of mu 3-hydroxotricopper(II) clusters and their integration into 3D frameworks. These unprecedented structures originate in the propagation of trigonal hydroxotricopper(II) clusters bridged by tri- or tetradentate organic ligands. Complex [{Cu3(mu3-OH)}{Cu3(mu3-O)}(mu4-btr)3(H2O)4(OH)2Cl6]Cl.0.5H2O adopts a structure of SrSi2 topology, with eight-fold interpenetration of the coordination frameworks. The structure of [{Cu3(mu3-OH)}2(mu3-btr)6(mu4-btr)(mu-X)X4]X5.nH2O (X = Br, n = 6; X = Cl, n = 8) involves 2D coordination layers [{Cu3(mu3-OH)}(mu3-btr)3]n with an exceptional (3,6)-net topology, which are cross-linked by tetradentate btr ligands and bridging chloride (bromide) ions.     

一个由咪唑衍生物构筑的二重穿插的锌配位聚合物的合成、结构及荧光性质

以ZnCl2、H3IDC(咪唑-4,5-二羧酸)和bix(1,4-双(咪唑基-1-甲基)-苯)为原料,在水热条件下得到了1个新的二重穿插的三维层-柱状金属-有机框架结构的配位聚合物{[Zn3(IDC)(bix)1.5Cl3].0.25H2O}n(1),并通过元素分析、红外光谱、热重分析以及单晶X-射线结构分析对其组成和结构进行了表征。单晶X-射线结构分析表明,配合物1的晶体属于单斜晶系,P21/c空间群,a=1.158 44(17)nm,b=1.088 75(16)nm,c=2.391 7(3)nm,β=96.835(2)°,V=2.995 1(8)nm3,Z=4,Dc=1.813 g.cm-3,F(000)=1 638,对于4 772个可观测点(I>2σ(I)),最终残差因子R1=0.037 9,wR2=0.089 6。在配合物1中,每个IDC3-分别桥联4个锌(Ⅱ)离子形成一维锯齿形链状结构,一维链通过cis-μ2-bix的2个氮原子连接形成二维网状结构,相邻的二维层之间再通过trans-μ2-bix的2个氮原子进一步连接形成了二重穿插的三维层-柱状金属-有机框架结构。固体室温荧光测试结果表明,配合物1在波长为400 nm的光激发下于468 nm处出现强烈的荧光发射。     

One pot-synthesis of chiral Ni6 clusters involving Ni3 subunits: a combined structural, magnetic and DFT study

Ni(6) clusters of the general formula [{Ni(3)L(n)(OAc)(OH)}(2)(X)(OAc)(H(2)O)(2)] (n = 1, 2; X = Cl(-) or N(3)(-), (L(n))(3-) = hexadentate tritopic ligands) can be isolated by spontaneous self-assembly, from mixtures of Ni(OAc)(2), H(3)L(n), NMe(4)OH·5H(2)O and NaX in adequate molar ratios. Thus, four new hexanuclear complexes [{Ni(3)L(1)(OAc)(OH)}(2)Cl(OAc)(H(2)O)(2)]·7.5H(2)O (1·7.5H(2)O), [{Ni(3)L(2)(OAc)(OH)}(2)Cl(OAc)(H(2)O)(2)]·2H(2)O·7.5MeOH (2·2H(2)O·7.5MeOH), [{Ni(3)L(1)(OAc)(OH)}(2)(N(3))(OAc)(H(2)O)(2)]·6H(2)O (3·6H(2)O) and [{Ni(3)L(2)(OAc)(OH)}(2)(N(3))(OAc)(H(2)O)(2)]·4H(2)O (4·4H(2)O) were obtained and fully characterised. 1·7.5H(2)O and 2·2H(2)O·7.5MeOH were isolated in the form of single crystals, the latter losing solvate on drying, to yield 2·2H(2)O. Recrystallisation of 3·6H(2)O in MeCN/MeOH also generates single crystals of 3·H(2)O·2MeOH·2MeCN. Their X-ray characterisation shows that these Ni(6) clusters can be considered to be built from two triangular trinuclear [Ni(3)L(n)(OAc)(OH)](+) subunits with different connectors. In addition, these studies demonstrate that the (L(n))(3-) ligands behave as trinucleating, adopting such a conformation that induces chirality in the isolated compounds. In this way, 3·H(2)O·2MeOH·2MeCN appears particularly interesting, since it emerges as homochiral after undergoing spontaneous resolution upon crystallisation. The magnetic characterisation of 1·7.5H(2)O to 3·6H(2)O reveals that the three compounds present an overall antiferromagnetic coupling. The intricate magnetic behaviour of these clusters, mediated by a total of 14 bridges of different kinds, was analysed and satisfactorily interpreted in light of DFT calculations.     

Mononuclear and dinuclear complexes with a [Ru(tBu2PCH2CH2PtBu2)(CO)] core

Thermolysis of solid [Ru(d(t)bpe)(CO)2Cl2](2, d(t)bpe =(t)Bu2PCH2CH2P(t)Bu2) under vacuum affords the five-coordinate complex [Ru(d(t)bpe)(CO)Cl2] (4), which was shown by X-ray crystallography to contain a weak remote agostic interaction. In solution, 4 can be readily trapped by CO, CH3CN or water to give [Ru(d(t)bpe)(CO)(L)Cl2](L = CO, 2; L = CH3CN, 6; L = H2O, 7). Reaction of 4 with AgOTf/H2O yields the tris-aqua complex [Ru(d(t)bpe)(CO)(H2O)3](OTf)2 (8), which has been structurally characterised and probed in solution by pulsed-gradient spin echo (PGSE) NMR spectroscopy. The water ligands in 8 are labile and easily substituted to give [Ru(d(t)bpe)(CO)(NCCH3)3](OTf)2 (10) and [Ru(d(t)bpe)(CO)(DMSO)3](OTf)2 (11). In the presence of CO, the tris-aqua complex undergoes water-gas shift chemistry with formation of the cationic hydride species [Ru(d(t)bpe)(CO)3H](OTf) (12) and CO2. X-Ray crystal structures of complexes 2, 4, 6, 8 and 11-12 are reported along with those for [{Ru(d(t)bpe)(CO)}2(mu-Cl)2(mu-OTf)](OTf) (3), [{Ru(d(t)bpe)(CO)}2(mu-Cl)3][Ru(d(t)bpe)(CO)Cl3](5) and [Ru(d(t)bpe)(CO)(H2O)2(OTf)](OTf)(9).     

Cluster core controlled reactions of substitution of terminal bromide ligands by triphenylphosphine in octahedral rhenium chalcobromide complexes

Reactions of rhenium chalcobromides Cs4[{Re6(mu3-S)8}Br6].2H2O, Cs3[{Re6(mu3-Se)8}Br6].2H2O, Cs3[{Re6(mu3-Q)7(mu3-Br)}Br6].H2O (Q = S, Se), and K2[{Re6(mu3-S)6(mu3-Br)2}Br6] with molten triphenylphosphine (PPh3) have resulted in a family of novel molecular hybrid inorganic-organic cluster compounds. Six octahedral rhenium cluster complexes containing PPh3 ligands with general formula [{Re6(mu3-Q)8-n(mu3-Br)n}(PPh3)4-nBrn+2] (Q = S, n = 0, 1, 2; Q = Se, n = 0, 1) have been synthesized and characterized by X-ray single-crystal diffraction and elemental analyses, 31P{1H} NMR, luminescent measurements, and quantum-chemical calculations. It was found that the number of terminal PPh3 ligands in the complexes is controlled by the composition and consequently by the charge of the cluster core {Re6Q8-nBrn}n+2. In crystal structures of the complexes with mixed chalcogen/bromine ligands in the cluster core all positions of a cube [Q8-nBrn] are ordered and occupied exclusively by Q or Br atoms. Luminescence characteristics of the compounds trans-[{Re6Q8}(PPh3)4Br2] and fac-[{Re6Se7Br}(PPh3)3Br3] (Q = S, Se) have been investigated in CH2Cl2 solution and the broad emission spectra in the range of 600-850 nm were observed.     

Preparation and characterization of diarylphosphazene and diarylphosphinohydrazide complexes of titanium, tungsten and ruthenium and phosphorylketimido complexes of rhenium

Reaction of the proligand Ph2PN(SiMe3)2 (L1) with WCl6 gives the oligomeric phosphazene complex [WCl4(NPPh2)]n, 1 and subsequent reaction with PMe2Ph or NBu4Cl gives [WCl4(NPPh2)(PMe2Ph)] (2) or [WCl5(NPPh2)][NBu4] (3), respectively. DF calculations on [WCl5(NPPh2)][NBu4] show a W=N double bond (1.756 A) and a P-N bond distance of 1.701 A, which combined with the geometry about the P atom suggests, there is no P-N multiple bonding. Reaction of L1 with [ReOX3(PPh3)2] in MeCN (X = Cl or Br) gives [ReX2(NC(CH3)P(O)Ph2)(MeCN)(PPh3)](X = Cl, 4, X = Br, 5) which contains the new phosphorylketimido ligand. It is bound to the rhenium centre with a virtually linear Re-N-C arrangement (Re-N-C angle = 176.6 degrees, when X = Cl) and there is multiple bonding between Re and N (Re-N = 1.809(7) A when X = Cl). The proligand Ph2PNHNMe2(L2H) reacts with [(C5H5)TiCl3] to give [(C5H5)TiCl2(Me2NNPPh2)] (6). An X-ray crystal structure of the complex shows the ligand (L2) is bound by both nitrogen atoms. Reaction of the proligands Ph2PNHNR2[R2 = Me2 (L2H), -(CH2CH2)2NCH3 (L3H), (CH2CH2)2CH2 (L4H)] with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave [RuCl2(eta6-p-MeC6H4iPr)L] {L = L2H (7), L3H (8), L4H (9)}. The X-ray crystal structures of 7-9 confirmed that the phosphinohydrazine ligand is neutral and bound via the phosphorus only. Reaction of complexes 7-9 with AgBF4 resulted in chloride ion abstraction and the formation of the cationic species [RuCl(6-p-MeC6H4iPr)(L)]+ BF4- {(L = L2H (10), L3H (11), L4H (12)}. Finally, reaction of complex 6 with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave the binuclear species [(eta6-p-MeC6H4iPr)Cl2Ru(mu2,eta3-Ph2PNNMe2)TiCl2(C5H5)], 13.     

Synthesis, structural diversity and fluorescent characterisation of a series of d10 metal-organic frameworks (MOFs): reaction conditions, secondary ligand and metal effects

Along with our recent investigation on the flexible ligand of H(2)ADA (1,3-adamantanediacetic acid), a series of Zn(II) and Cd(II) metal-organic frameworks, namely, [Zn(3)(ADA)(3)(H(2)O)(2)](n)·5nH(2)O (1), [Zn(ADA)(4,4'-bipy)(0.5)](n) (2), [Zn(2)(ADA)(2)(bpa)](n) (3), [Zn(2)(ADA)(2)(bpa)](n) (4), [Zn(2)(ADA)(2)(bpp)](n) (5), [Cd(HADA)(2)((4,4'-bipy)](n) (6), [Cd(3)(ADA)(3)(bpa)(2)(CH(3)OH)(H(2)O)](n) (7), and [Cd(2)(ADA)(2)(bpp)(2)](n)·7nH(2)O (8) have been synthesized and structurally characterized (where 4,4'-bipy = 4,4'-dipyridine, bpa = 1,2-bis(4-pyridyl)ethane and bpp = 1,3-bis(4-pyridyl)propane). Due to various coordination modes and conformations of the flexible dicarboxylate ligand and the different pyridyl-containing coligands, these complexes exhibit structural and dimensional diversity. Complex 1 exhibits a three-dimensional (3D) framework containing one-dimensional (1D) Zn(II)-O-C-O-Zn(II) clusters. Complex 2 exhibits a 2D structure constructed by 1D double chains based on [Zn(2)ADA(2)] units and a 4,4'-bipy pillar. Complexes 3 and 4 possess isomorphic 2D layer structures, resulting from the different coordination modes of carboxylate group of ADA ligands. Complex 5 features a 2D 4(4) layer in which ADA ligands and Zn(II) atoms construct a 1D looped chain and the chains are further connected by bpp ligands. Complex 6 is composed of 1D zig-zag chains that are entangled through hydrogen-bonding interactions to generate a 2D network. Complex 7 is a rare (3,5)-connected network. Complex 8 possesses a 3D microporous framework with lots of water molecules encapsulated in the channels. The structural diversity of the complexes perhaps mainly results from using diverse secondary ligands and different metal centre ions, and means the assistant ligand and metal centre play important roles in the design and synthesis of target metal-organic frameworks. This finding revealed that ADA could be used as an effective bridging ligand to construct MOFs and change coordination modes and conformational geometries in these complexes. The thermogravimetric analyses, X-ray powder diffraction and solid-state luminescent properties of the complexes have also been investigated.     

Rationally designed, polymeric, extended metal-ciprofloxacin complexes

Reactions of the antimicrobial fluoroquinolone ciprofloxacin (cfH) with metal salts in the presence of aromatic polycarboxylate ligands or under basic conditions produce fourteen new metal-cfH complexes, namely, [Ba2(cf)2(1,4-bdc)(H2O)2] x H2O (1), [Sr6(cf)6(1,4-bdc)3(H2O)6] x 2H2O (2), [M2(cfH)2(bptc)(H2O)2] x 8H2O (M = Mn3 and Cd4), [M(cfH)(1,3-bdc)] (M = Mn5, Co6, and Zn7), [Zn2(cfH)4(1,4-bdc)](1,4-bdc) x 13H2O (8), [Ca(cfH)2(1,2-Hbdc)2] x 2H2O (9) and [M(cf)2] x 2.5H2O (M = Mn10, Co11, Zn12, Cd13, and Mg14) (1,4-bdc = 1,4-benzenedicarboxylate, bptc = 3,3',4,4'-benzophenonetetracarboxylate, 1,3-bdc = 1,3-benzenedicarboxylate, 1,2-bdc = 1,2-benzenedicarboxylate). Their structures were determined by single-crystal X-ray diffraction analyses and further characterized by elemental analyses, IR spectra, and thermogravimetric analyses. The structures of 1 and 2 consist of unique two-dimensional arm-shaped layers. Compounds 3 and 4 are isostructural and feature one-dimensional structures formed from the interconnection of [M2(cfH)2(H2O)2] dimers with bptc ligands. Compounds 5-7 are isostructural and contain double-chain-like ribbons constructed from [M2(cfH)2(CO2)2] dimers and 1,3-bdc. Compound 8 consists of a pair of [Zn(cfH)2]2+ fragments bridged by a 1,4-bdc into a dinuclear dumbbell structure. Compound 9 is a neutral monomeric complex. To the best of our knowledge, compounds 1-9 are the first examples of metal-quinolone complexes that contain aromatic polycarboxylate ligands. Compounds 10-14 are isostructural and exhibit interesting two-dimensional rhombic grids featuring large cavities with dimensions of 13.6x13.6 A. Up to now, polymeric extended metal-cfH complexes have never been reported.