锰催化炔烃的立体选择性硅氢化反应:金属有机和自由基双轨机制

正烯基硅烷具有低毒、稳定、易于操作及转化等优点,在有机合成中发挥着重要的作用.炔烃的硅氢化反应是制备烯基硅烷最简单和有效的方法,目前工业上此类反应主要是依靠贵金属催化来实现,而锰催化的炔烃硅氢化反应尚未见报道.中国科学院化学研究所王从洋课题组首次实现了锰催化的炔烃立体选择性硅氢化反应.通过采用单核     

MOFs/水凝胶复合材料的制备及其应用研究

金属有机框架(MOFs)具有大量的孔隙结构和活性位点,在气体吸附、催化、医疗等领域均发挥了巨大的作用。MOFs是晶体粉末,具有脆性较大、在水中易分解和不易回收等缺点,从而限制了其应用。通过MOFs与柔性高分子的复合,特别是与水凝胶的复合,极大地改善了复合材料的柔顺性、可回收和可加工性等特性,进一步拓宽了MOFs的应用领域。本文详细阐述了基于水凝胶MOFs原位生成法、MOFs /水凝胶同时生成法和水凝胶包裹MOFs法等三种不同方法制备MOFs/水凝胶复合材料的研究进展,并对上述三种制备方法的特点及其产物特征进行了总结,进一步归纳了复合材料在生物医药、催化、废水处理和气体吸附等领域的应用。最后,对MOFs/水凝胶复合材料制备方法的改进和复合材料应用前景进行了深入讨论和展望。     

提高金属有机骨架材料在二氧化碳热催化转化中的性能:策略及前景展望

近年来,大气中CO2的浓度不断增加,带来全球变暖等一系列严重后果,成为国际社会共同关注的环境问题.将CO2催化转化为高附加值化学品可有效降低其向大气中的排放,同时可实现其资源化利用,符合低碳社会的发展目标.目前,已有多种催化体系实现了CO2向不同化学品的转化.然而,由于CO2自身的热力学稳定性和动力学惰性,这些转化通常需要在苛刻的反应条件和较高能耗下进行.设计开发高效催化体系、实现温和条件下CO2的转化利用引起了工业界和学术界的广泛兴趣.金属有机骨架材料(MOFs)是一类由有机配体和金属中心通过配位键组装而成的有机-无机杂化材料,在很多方面展现出良好的应用性能.由于其结构的多样性、可设计性、高比表面积和多孔性等独特性质,MOFs在催化领域吸引了很多研究者的关注.其中,MOFs作为非均相催化剂在CO2热催化转化中表现出良好的应用前景,已实现多种CO2向高值化学品的转化路径.但这些催化体系也存在一些缺点,如有些MOFs材料在催化反应中稳定性差以及其微孔性对反应中的传质造成限制等.因此,设计稳定的MOFs和MOF-基材料并对其结构进行优化改性,从而在温和条件下实现高效的CO2转化具有重要意义.本文综述了提高MOFs在CO2热催化转化反应中性能的几种策略:(1)对MOFs结构中的配体进行设计,包括具有活性官能团的配体、活性配合物作为配体和引入混合配体设计多元MOF;(2)调节MOFs结构中的金属中心,设计混合金属中心和包含活性金属团簇的金属中心;(3)构筑多级孔MOFs;(4)设计MOF-基的复合材料,包括MOFs作为载体与金属纳米颗粒、活性配合物和聚合物构建复合材料;(5)利用MOFs作为前驱体制备MOF-基衍生物材料,重点阐述了如何增加MOFs作为非均相催化剂的催化活性位点以及在CO2转化反应中各位点之间的协同作用.此外,介绍了原位表征技术在MOF-基材料用于CO2固定和转化中的应用.最后,分析了MOF-基非均相催化材料在CO2热催化转化领域目前面临的问题和挑战,包括MOFs材料结构优化、催化机理研究和规模化制备等方面,并对未来的发展趋势进行了展望.     

含茂基稀土金属有机络合物催化剂在有机合成中的应用

综述了含茂基稀土金属有机络合物催化下的不饱和烃（或其取取衍生物）转化反应及其在有机合成中的作用。重点阐述了含茂基稀土金属有机络合物催化的烯烃氧化，氢化环化；烯烃和炔烃的氢化硅化，1，5－或1，6－二烯或烯炔的氢化硅化／环化，氨基取代烯烃，炔烃，丙二烯等的氢化胺化／环化等反应在有机合成中的主要用途，这些反应在形成碳－杂原子键，碳－碳键，碳环和杂环等方面具有广泛的应用前景。讨论了这些反应的催化循环机制，区域稳定性，对映选择性，非对映选择性及其影响因素。     

调控炔烃半氢化反应的催化选择性:实验和理论的最新进展（英文）

由于短链烯烃的广泛应用,炔烃选择性加氢制备烯烃是一个非常重要的石油化学催化过程.其中最简单的乙炔半氢化,吸引了众多研究者的广泛研究,是催化选择性调控的一个非常重要反应.工业上,由石油蒸汽裂解得到的乙烯往往混有微量(¹%)的乙炔,它会毒化乙烯聚合反应时所使用的Ziegler-Natta催化剂,因此需要降低乙炔含量至5×10–6以下.这要求加氢催化剂具有很高的乙炔转化率(> 99%)和乙烯选择性(> 80%).Pd基催化剂因低温下的具有高活性,是最常用的炔烃半氢化催化剂,其中Pd-Ag合金催化剂已在工业界应用了数十年.近十几年来,新型的乙炔半氢化催化剂不断被提出,其催化选择性的研究也取得了很大的进展.本文对炔烃半氢化反应的最新研究进展进行了总结.以乙炔加氢为例,介绍了其工业反应的条件、反应的网络以及潜在的副反应.归纳了提高加氢选择性的常见方法,并总结了近十几年报道的性能较好的乙炔半氢化催化剂.重点阐述了近年研究对加氢选择性的深入理解:Pd基催化剂的表面结构会随着反应条件和反应过程动态变化,从而影响加氢选择性.利用程序升温脱附和X射线光电子能谱研究催化剂的表...     

金属-有机骨架材料在催化氧化反应中的应用

本文综述了近几年金属-有机骨架(metal-organic frameworks,MOFs)材料在催化氧化反应中的研究进展。由于MOFs材料在结构上常具有特殊活性位点、孔隙率高、比表面积大且孔尺寸与性质可调等特点,在催化上有极大的应用潜力。本文主要介绍了MOFs材料自身作为催化剂和其作为载体负载具有催化活性组分的催化氧化反应。其中,着重介绍了具有配位不饱和金属位点的MOFs和MOFs做为载体负载金属纳米颗粒、多金属氧酸盐和金属卟啉用于催化的氧化反应,包括一些有机分子如烷烃、苄基化合物、烯烃、醇、酚、硫化物和无机小分子CO、水的催化氧化,也介绍了相关仿生催化和有机染料的催化氧化。MOFs和MOFs载体的催化性能主要从稳定性、非均相性、尺寸选择性及活性位的析出四个方面进行了评价。同时,对MOFs材料在催化应用中的发展趋势作了展望。     

Z'(ohm)

C–S键的构建在化学中具有非常重要的意义.利用硫醇和烯烃/炔烃的硫氢化反应来构建C-S键是一种绿色、可持续和低成本的方法.本文以ZnCl2, InCl3,硫代乙酰胺为前驱体,在微量IrCl3存在条件下,通过一步溶剂热法制备得到了含有不同Ir摩尔比(0.5 mol%, 1 mol%和2 mol%)的Ir2S3/ZnIn2S4纳米复合材料,并考察了它在可见光下诱导烯烃/炔烃的硫氢化反应中的催化性能.以苄基硫醇和苯乙炔的硫氢化反应为模型反应,发现在ZnIn2S4中引入微量的Ir2S3可明显提升其性能,其中以0.5mol%Ir2S3/ZnIn2S4为催化剂时反应性能最佳;反应15 h后苄基硫醇的转化率为97%,苄基苯乙烯基硫醚的产率为95%,明显高于以未修饰的ZnIn2S4为催化剂时的转化率和产率.在反应中加入自由基捕获剂TEMPO之后可淬灭该反应,表明与未修饰的ZnIn2S4相同,以Ir2S3/ZnIn2S4复合材料催化的硫氢化反应同样是由硫醇自由基诱发的反应.这种微量Ir2S3对ZnIn2S4上光诱导硫氢化反应的提升作用在所考察的多个系列底物的反应中都有不同程度的体现,尤其对于一些空间体积较大的底物,其提升作用尤为明显,表明微量Ir2S3的存在对ZnIn2S4上光诱导硫醇和烯烃/炔烃硫氢化反应的提升作用具有普适性.通过研究负载不同助催化剂(MoS2, NiS和Pd)的ZnIn2S4纳米复合材料在烯烃/炔烃硫氢化反应中的性能及其电化学交流阻抗,我们发现, Ir2S3的存在可促进ZnIn2S4上光生电子空穴的分离,从而有利于巯基自由基的生成,同时还抑制了副物氢气的产生,因此,烯烃/炔烃的硫氢化反应性能显著提高.该文提出了一种在可见光下利用半导体光催化来构建C-S键的绿色途径,对于理解和设计新的光催化有机合成反应体系具有一定的指导意义.     

机械化学法制备金属-有机骨架及其复合物研究进展

金属-有机骨架(MOFs)是由金属离子/簇和多齿状有机配体通过配位键桥联而形成的多孔晶态材料。MOFs材料具有孔隙率高、比表面积大、尺寸可调、结构易修饰、功能多样化等特点,使其在气体吸附、分离和催化等方面都具有潜在应用价值。到目前为止,在MOFs合成的几种常见方法中,机械化学法(即在无溶剂或极少量溶剂的情况下研磨固体反应物进行的反应)作为一种清洁、绿色、高效的合成手段逐渐引起人们的关注。本综述总结了近年来机械化学合成MOFs及其复合物的典型进展,目的是为机械化学法合成MOFs及其复合材料提供一个通用而易于理解的概述。目前的研究进展表明,机械化学法是一种实用且环境友好的合成方法,为低成本、宏量生产MOFs及其复合物提供了可能。     

金属有机框架(MOFs)基光催化剂的设计及其在太阳能燃料生产和污染物降解领域的研究进展

金属有机骨架(MOFs)具有较高的比表面积,丰富的金属/有机物种,较大的孔体积以及结构和成分可调节的特性,因此在太阳能燃料生产和污染物的光降解领域具有广泛的应用.根据其结构特点,研究者们主要从有机配体和孔道结构两方面对MOFs进行调控:(1)对有机配体进行修饰,如将杂原子、羟基、卤素原子、金属离子、生物大分子等引入MOFs结构;(2)将无机纳米粒子引入MOFs孔道内,如将贵金属、金属氧化物、多金属氧酸盐等纳米粒子封装在MOFs的孔道内.这些策略可有效增强MOFs的导电性、稳定性等,并进一步提高MOFs基催化剂的光催化性能.本文首先概述了四种经典MOFs类型,即UiO,ZIF,MIL和PCN系列的结构特点和催化性能.其次,总结了在设计MOFs基光催化材料过程中,根据不同类型MOFs特点着重考虑的五方面因素,即稳定性、能带结构、吸附作用、选择性和电导性.再次,讨论了提高MOFs基光催化剂活性的策略,如助催化剂修饰、构建异质结、配体或金属中心修饰和缺陷工程.最后,总结了MOFs基光催化材料在催化还原CO₂、分解水制氢和降解有机污染物反应中的应用进展及影响其催化性能的主要因素.尽管MOFs基光催化材料研究已经取得了令人瞩目的进展,但对MOFs基光催化剂进行可控设计制备仍然存在挑战.如何实现纳米MOFs基光催化材料的制备与规模化生产、可调缺陷MOFs基光催化材料的精准设计、开发高稳定性的MOFs基光催化材料等仍需进一步探索.因此,未来需要从MOFs的纳米化合成、复合材料界面结构的精准调控、催化活性机制与稳定性关系等方面对MOFs基光催化材料进行深入的研究.     

超临界二氧化碳中PdCl2-CuCl2体系催化末端炔烃氧化偶联反应

研究了在超临界二氧化碳中实现PdCl₂-CuCl₂体系催化末端炔烃的氧化偶联反应, 研究结果表明: 催化剂、超临界二氧化碳及其共溶剂对反应结果有着重要的影响, 炔烃的取代基会影响末端炔烃在氧化偶联反应中的反应活性.     

Fast and Selective Semihydrogenation of Alkynes by Palladium Nanoparticles Sandwiched in Metal–Organic Frameworks

The semihydrogenation of alkynes into alkenes rather than alkanes is of great importance in the chemical industry. Unfortunately, state-of-the-art heterogeneous catalysts hardly achieve high turnover frequencies (TOFs) simultaneously with almost full conversion, excellent selectivity, and good stability. Here, we used metal–organic frameworks (MOFs) containing Zr metal nodes (“UiO”) with tunable wettability and electron-withdrawing ability as activity accelerators for the semihydrogenation of alkynes catalyzed by sandwiched palladium nanoparticles (Pd NPs). Impressively, the porous hydrophobic UiO support not only leads to an enrichment of phenylacetylene around the Pd NPs but also renders the Pd surfaces more electron-deficient, which leads to a remarkable catalysis performance, including an exceptionally high TOF of 13835 h⁻¹, 100 % phenylacetylene conversion 93.1 % selectivity towards styrene, and no activity decay after successive catalytic cycles. The strategy of using molecularly tailored supports is universal for boosting the selective semihydrogenation of various terminal and internal alkynes.     

Fast and Selective Semihydrogenation of Alkynes by Palladium Nanoparticles Sandwiched in Metal–Organic Frameworks

The semihydrogenation of alkynes into alkenes rather than alkanes is of great importance in the chemical industry. Unfortunately, state‐of‐the‐art heterogeneous catalysts hardly achieve high turnover frequencies (TOFs) simultaneously with almost full conversion, excellent selectivity, and good stability. Here, we used metal–organic frameworks (MOFs) containing Zr metal nodes (“UiO”) with tunable wettability and electron‐withdrawing ability as activity accelerators for the semihydrogenation of alkynes catalyzed by sandwiched palladium nanoparticles (Pd NPs). Impressively, the porous hydrophobic UiO support not only leads to an enrichment of phenylacetylene around the Pd NPs but also renders the Pd surfaces more electron‐deficient, which leads to a remarkable catalysis performance, including an exceptionally high TOF of 13835 h^?1, 100 % phenylacetylene conversion 93.1 % selectivity towards styrene, and no activity decay after successive catalytic cycles. The strategy of using molecularly tailored supports is universal for boosting the selective semihydrogenation of various terminal and internal alkynes.     

Palladium-based bimetallic catalysts for highly selective semihydrogenation of alkynes using ex situ generated hydrogen

Semihydrogenation of alkynes to alkenes is an important and fundamental reaction in many industrial and synthetic applications and often suffers low selectivity because of the overhydrogenation. Here, highly selective semihydrogenation of alkynes is achieved by using H₂ ex situ generated from formic acid dehydrogenation with palladium (Pd)-based bimetallic catalysts through a two-chamber reactor in this work, realizing efficient utilization of H₂ and selective production of alkenes under mild reaction conditions. The Pd-based bimetallic catalysts show excellent catalytic performances for semihydrogenation of alkynes (PdZn bimetallic catalyst) and dehydrogenation of formic acid (PdAg bimetallic catalyst) in the two-chamber reactor.     

3 d Transition Metal‐Catalyzed Hydrogenation of Nitriles and Alkynes

Selective hydrogenation of nitriles and alkynes is crucial considering the vast applications of reduced products in industries and in the synthesis of bioactive compounds. Particularly, the late 3d transition metal catalysts (manganese, iron, cobalt, nickel and copper) have shown promising activity for the hydrogenation of nitriles to primary amines, secondary amines and imines. Similarly, semihydrogenation of alkynes to E‐ and Z‐alkenes by 3d metals is adequately successful both via the transfer hydrogenation and by using molecular hydrogen. The emergence of 3d transition metals in the selective synthesis of industrially relevant amines, imines and alkenes makes this protocol more attractive. Herein, we provide a concise overview on the late 3d transition metal‐catalyzed hydrogenation of nitriles to amines and imines as well as semihydrogenation of alkynes to alkenes.     

Generation and Stabilization of a Dinickel Catalyst in a Metal-Organic Framework for Selective Hydrogenation Reactions

Although many monometallic active sites have been installed in metal–organic frameworks (MOFs) for catalytic reactions, there are no effective strategies to generate bimetallic catalysts in MOFs. Here we report the synthesis of a robust, efficient, and reusable MOF catalyst, MOF-NiH, by adaptively generating and stabilizing dinickel active sites using the bipyridine groups in MOF-253 with the formula of Al(OH)(2,2′-bipyridine-5,5′-dicarboxylate) for Z-selective semihydrogenation of alkynes and selective hydrogenation of C=C bonds in α,β-unsaturated aldehydes and ketones. Spectroscopic studies established the dinickel complex (bpy⋅⁻)Ni^II(μ₂-H)₂Ni^II(bpy⋅⁻) as the active catalyst. MOF-NiH efficiently catalyzed selective hydrogenation reactions with turnover numbers of up to 192 and could be used in five cycles of hydrogenation reactions without catalyst leaching or significant decrease of catalytic activities. The present work uncovers a synthetic strategy toward solution-inaccessible Earth-abundant bimetallic MOF catalysts for sustainable catalysis.     

Advances in chemoselective and/or stereoselective semihydrogenation of alkynes

The chemoselective semihydrogenation of alkynes is one of the most important reactions in synthetic organic chemistry. During the last decade or so, a multitude of innovative catalytic methods have been developed to address the selective hydrogenation of alkynes. This digest focuses on the recent developments in chemoselective semihydrogenation of alkynes to alkenes.     

Selective liquid-phase semihydrogenation of functionalized acetylenes and propargylic alcohols with silica-supported bimetallic palladium-copper catalysts

Silica-supported, bimetallic palladium-copper catalysts were prepared in solution under mild conditions by reacting lithium di(4-tolyl)cuprate with palladium acetate in the presence of silica particles. Small bimetallic palladium-copper particles were deposited on the silica surface as confirmed with TEM-EDAX and EXAFS. The new material has been applied as catalyst in the liquid-phase semihydrogenation of mono- and disubstituted alkynes and showed high selectivity toward the cis-alkenes. The influence of addition of quinoline or potassium hydroxide to the semihydrogenation reaction mixture and the effects of exposure of the catalyst to air before use have been investigated.     

Highly selective hydrogenation of multiple carbon-carbon bonds promoted by nickel(0) nanoparticles

A new method for the highly stereoselective cis semihydrogenation of internal alkynes, semihydrogenation of terminal alkynes, reduction of dienes to alkenes, and reduction of alkynes and alkenes to alkanes is described based on in situ generated both Ni(0) nanoparticles and molecular hydrogen.     

Selective Semihydrogenation of Alkynes on Shape‐Controlled Palladium Nanocrystals

A systematic study on the selective semihydrogenation of alkynes to alkenes on shape‐controlled palladium (Pd) nanocrystals was performed. Pd nanocrystals with a cubic shape and thus exposed {100} facets were synthesized in an aqueous solution through the reduction of Na₂PdCl₄ with L ‐ascorbic acid in the presence of bromide ions. The Pd nanocubes were tested as catalysts for the semihydrogenation of various alkynes such as 5‐decyne, 2‐butyne‐1,4‐diol, and phenylacetylene. For all substrates, the Pd nanocubes exhibited higher alkene selectivity (>90 %) than a commercial Pd/C catalyst (75–90 %), which was attributed to a large adsorption energy of the carbon–carbon triple bond on the {100} facets of the Pd nanocubes. Our approach based on the shape control of Pd nanocrystals offers a simple and effective route to the development of a highly selective catalyst for alkyne semihydrogenation.