Effect of temperature,collection mode,and modifier on the supercritical CO2 extraction of dicofol residues from fish samples

Toxicity evaluation of Dicofol to Astyanax bimaculatus schubarti, a characteristic fish species living in tropical rivers and lakes was carried out through LC₅₀ – 96 Hours. These experiments were performed under laboratory controlled conditions with atmospheric air flow and dilution water at 25°C in the static mode, supercritical fluid extraction (SFE) with pure CO₂ and CO₂ modified with hexane and methanol were used at 50, 70, 80, and 100°C and 300 atm. Several collection modes were studied to extract Dicofol from fish samples. The extraction efficiencies were directly comparedd with those obtained after 8 h of Soxhlet extraction using the same clean-up with Florisil and analysis by HRGC/ECD and HRGC/MS as a confirmatory analytical technique. The SFE recoveries at temperatures lower than 80°C were typically lower than soxhlet recoveries; however a temperature increase enhanced the efficiency of SFE. The results showed that under certain conditions, supercritical fluid gave higher extractio power (extracted 11 % more pesticide), shorter extraction time, and lower solvent consumption than Soxhlet, thus affording an excellent alternative to the conventional method for extracting Dicofol from fish sample.     

Determination of Microcystins in Cyanobacteria by Supercritical Fluid Extraction and Liquid Chromatography‐Tandem Mass Spectrometry

Abstract

A method for the detection of microcystins (microcystin LR, RR, and YR) in cyanobacteria by supercritical fluid extraction (SFE) and liquid chromatography‐mass spectrometry (LC/MS) has been developed. Supercritical fluids for the analytical extraction of nonvolatile, higher molecular weight compound, and microcystins from cyanobacteria were investigated. The microcystins included in this study are sparsely soluble in neat supercritical fluid CO₂. However, the microcystins was successfully extracted with a ternary mixture (90% CO₂, 9.5% methanol, 0.5% water) at 40°C and 250 atm. The polar carbon dioxide‐aqueous methanol fluid system gave high extraction efficiency for the extraction of the polar microcystins from cyanobacteria. The microcystins were determined by liquid chromatography‐tandem mass spectrometry (LC/MS/MS).     

Exploration and optimization of conditions for quantitative analysis of lignans in Schisandra chinensis by an online supercritical fluid extraction with supercritical fluid chromatography system

An online supercritical fluid extraction with supercritical fluid chromatography system could provide sequential extraction and quantitative analysis of lignans in Schisandra chinensis. Supercritical fluid extraction conditions were optimized at 15 MPa, 50°C, and 4 min with supercritical CO₂ adding 1% methanol; the elution volume and flow rate were set at 6 mL and 2 mL/min to blow extract out of the tank completely. The split‐flow rate was confirmed at 2.5%, which determines injection volume and accuracy of quantitative detection. The factors having negative influences on supercritical fluid chromatography retention in the online system, including sample loading forms and backpressure settings, are discussed in the paper. At last, an extraction‐quantitative method for lignans in Schisandra chinensis was developed, which could be finished within 19.5 min. The total content percentage of four lignans (Schisandrin, Schisandrin A, Schisandrin B and Schisandrol B) in four batches was respectively measured to be 1.42, 1.54, 1.62, and 1.90%.     

Determination of arsenic species in solid matrices utilizing supercritical fluid extraction coupled with gas chromatography after derivatization with thioglycolic acid n‐butyl ester

A method using derivatization and supercritical fluid extraction coupled with gas chromatography was developed for the analysis of dimethylarsinate, monomethylarsonate and inorganic arsenic simultaneously in solid matrices. Thioglycolic acid n‐butyl ester was used as a novel derivatizing reagent. A systematic discussion was made to investigate the effects of pressure, temperature, flow rate of the supercritical CO₂, extraction time, concentration of the modifier, and microemulsion on extraction efficiency. The application for real environmental samples was also studied. Results showed that thioglycolic acid n‐butyl ester was an effective derivatizing reagent that could be applied for arsenic speciation. Using methanol as modifier of the supercritical CO₂ can raise the extraction efficiency, which can be further enhanced by adding a microemulsion that contains Triton X‐405. The optimum extraction conditions were: 25 MPa, 90°C, static extraction for 10 min, dynamic extraction for 25 min with a flow rate of 2.0 mL/min of supercritical CO₂ modified by 5% v/v methanol and microemulsion. The detection limits of dimethylarsinate, monomethylarsonate, and inorganic arsenic in solid matrices were 0.12, 0.26, and 1.1 mg/kg, respectively. The optimized method was sensitive, convenient, and reliable for the extraction and analysis of different arsenic species in solid samples.     

Dry ice-originated supercritical and liquid carbon dioxide extraction of organic pollutants from environmental samples

Packed in a high-pressure vessel and under calculated conditions, dry ice can be used as a source of carbon dioxide for supercritical CO₂ extraction or liquid CO₂ of organic compounds from environmental samples. Coupled with a fluid modifier such as toluene, dry ice-originated supercritical CO₂ (Sc CO₂) achieves quantitative extraction of many volatile organic compounds (VOCs) and semivolatile organic compounds (SOCs) including polycyclic aromatic hydrocarbons (PAHs), n-alkanes, and polychlorinated biphenyls (PCBs) from solid matrices. Compared to contemporary manual or automated supercritical fluid extraction (SFE) technologies, this novel technique simplifies SFE to a minimum requirement by eliminating the need of a high-pressure pump and any electrical peripherals associated with it. This technique is highly suitable to analytical areas where sample preservation is essential but difficult in the sampling field, or where sample collection, sample preparation, and analysis are to be done in the field.     

Oil-in-water analysis using supercritical fluid extraction interfaced with fixed wavelength infrared detection

The combination of a direct aqueous supercritical fluid extraction system interfaced to a fixed wavelength infrared detector; measuring CH₂ (ν_asymmetric) absorbance at 2930 cm^?1, has been successfully developed for the analysis of oil-in-water. Using an optional, in-line silica gel treatment procedure, method accuracy for determining Brent Delta crude oil in spiked 500 mL water samples was 92.0% to 94.5% with RSD 4.7% to 6.5%. The supercritical fluid extraction-infrared method enables a second analysis of the same water sample without silica gel treatment. For second sets of analyses without silica gel treatment, method accuracy for determining Brent Delta crude oil in spiked 500 mL water samples was 87% to 96.0% with RSD 7.5% to 9.5%. Results of this study indicate that the silica gel treatment procedure reduces the calculated level of Brent Delta crude oil-in-water by 6.6–12.4% relative to samples analysed without silica gel treatment. The results of a study involving Fourier transform infrared spectroscopy indicate a limit of detection for n-decane of approximately 0.5 mg L^?1 by measuring CH₂ (ν_asymmetric) absorbance using the supercritical fluid extraction-infrared method. Sample preparation using direct aqueous supercritical fluid carbon dioxide extraction provides an indefinite means for the use of infrared techniques to measure oil-in-water.     

Performance comparison between packed column supercritical fluid chromatography (SFC) and HPLC using cyclandelate as the model analyte

A reproducible and fast method has been developed for the assay of cyclandelate in bulk and drug forms using packed column supercritical fluid chromatography using dicyclohexyl phthalate (DCHP) as internal standard. The drug and the internal standard were resolved by elution with supercritical fluid carbon dioxide doped with 14.29% (v/v) methanol on an RP-C₁₈ column and detected spectrophotometrically at 228 nm. Chromatographic figures of merit using C₈, C₁₈, cyano and phenyl columns have been assessed. Parallel experiments have been performed by HPLC and the data have been compared. Supercritical fluid extraction using CO₂ modified with a small amount of methanol was found to give quantitative analytical recoveries of cyclandelate from a dosage form. SFC has been shown to be a viable, faster alternative technique to HPLC generating less disposable waste.     

Use of supercritical fluid extraction in the analysis of polychlorinated dibenzodioxins and dibenzofurans

Summary Supercritical fluid extraction is a powerful technique with great promise in organic analytical chemistry. To date little has been published on the use of SFE in the analysis of polychlorinated dibenzodioxins and dibenzofurans (PCDD/F). The data point, however, to the feasibility of a selective and exhaustive extraction of these compounds. Solid phase trapping of the extracted PCDD/F allows for on-line class separation and clean-up and seems to be the most flexible choice of collection mode. Both CO₂ and N₂O can be used as supercritical fluids. Extraction recoveries can be improved with a small percentage of an organic solvent added to the supercritical fluid as modifier. Methanol and benzene have proven to be efficient. Relatively strong supercritical fluid conditions are needed for the extraction of PCDD/F from fly ash (350–400 atm at 330–370 K). Spiked internal standards are easily extracted even at mild conditions whereas native PCDD/F are not; thus caution should be taken when an isotopic dilution technique is used for a future evaluation of SFE in the analysis of PCDD/F.     

Performance comparison between packed column supercritical fluid chromatography (SFC) and HPLC using cyclandelate as the model analyte

A reproducible and fast method has been developed for the assay of cyclandelate in bulk and drug forms using packed column supercritical fluid chromatography using dicyclohexyl phthalate (DCHP) as internal standard. The drug and the internal standard were resolved by elution with supercritical fluid carbon dioxide doped with 14.29% (v/v) methanol on an RP-C₁₈ column and detected spectrophotometrically at 228 nm. Chromatographic figures of merit using C₈, C₁₈, cyano and phenyl columns have been assessed. Parallel experiments have been performed by HPLC and the data have been compared. Supercritical fluid extraction using CO₂ modified with a small amount of methanol was found to give quantitative analytical recoveries of cyclandelate from a dosage form. SFC has been shown to be a viable, faster alternative technique to HPLC generating less disposable waste. Received: 20 June 1997 / Revised: 20 October 1997 / Accepted: 26 October 1997     

Identification of lipophilic components in Citri Reticulatae Pericarpium cultivars by supercritical CO2 fluid extraction with ultra‐high‐performance liquid chromatography–Q Exactive Orbitrap tandem mass spectrometry

To systematically identify the lipophilic constituents of Citri Reticulatae Pericarpium from different cultivars, supercritical CO₂ fluid extraction and ultra‐high‐performance liquid chromatography–Q Exactive Orbitrap tandem mass spectrometry were integrated for the component analysis of 18 batches of Citri Reticulatae Pericarpium from 12 cultivars for the first time. A total of 57 components from the supercritical CO₂ fluid extracts were demonstrably or tentatively identified by the obtained parent peaks, fragment peaks, and retention times. In total, two flavonoids, six organic acids, nine coumarins, three aldehydes, seven esters, three terpenes, one limonoid, and five other compounds were detected for the first time; notably, coumarin components have not yet been reported in Citri Reticulatae Pericarpium. Furthermore, the extract constituents differed between cultivars. In particular, organic acids were more abundant in Citrus reticulata “Chachi” than in other cultivars, and pterostilbene was exclusively found in Citrus reticulata “Yichangju”. The results showed that a greater variety of compounds in Citri Reticulatae Pericarpium could be extracted by supercritical CO₂ fluid extraction and detected by ultra‐high‐performance liquid chromatography–Q Exactive Orbitrap tandem mass spectrometry. This study provides a more scientific basis for further analysis of the pharmacological activity and quality of Citri Reticulatae Pericarpium components from different cultivars.     

Supercritical extraction of thyme (Thymus vulgaris L.)

Summary Chromatographic methods for the qualitative and quantitative analysis of thyme (Thymus vulgaris L.) extracts (essential oil obtained by steam distillation and extracts obtained by carbon dioxide supercritical fluid extraction and methylene chloride) are described. The composition of extracts obtained at different pressures (from 80 bar to 400 bar) and constant temperature (40°C) is discussed. The extraction system thyme— supercritical carbon dioxide was modelled by empirical equations defining the dependence of the total extract (TE) solubility and thymol solubility in CO₂ on the density of carbon dioxide.     

Ring-opening precipitation polymerization of poly(D,L-lactide-co-glycolide) in supercritical carbon dioxide

The biodegradable polymer poly(D ,L -lactide-co-glycolide) was synthesized by a ring-opening precipitation polymerization in supercritical CO₂ using stannous octoate as initiator. Following polymerization, unreacted monomer was removed by supercritical fluid extraction and the polymer was recovered as a porous solid upon depressurization of the CO₂ phase. The lactide to glycolide ratio of the polymer was determined to be 70.7 : 29.3 using ¹³C NMR spectroscopy. The weight-average molecular weight of the product was measured to be 3 500, with a polydispersity of 1.4 using gel permeation chromatography.     

Parameters optimization of supercritical fluid‐CO2 extracts of frankincense using response surface methodology and its pharmacodynamics effects

The volatile oil parts of frankincense (Boswellia carterii Birdw.) were extracted with supercritical carbon dioxide under constant pressure (15, 20, or 25 MPa) and fixed temperature (40, 50, or 60°C), given time (60, 90, or 120 min) aiming at the acquisition of enriched fractions containing octyl acetate, compounds of pharmaceutical interest. A mathematical model was created by Box‐Behnken design, a popular template for response surface methodology, for the extraction process. The response value was characterized by synthetical score, which comprised yields accounting for 20% and content of octyl acetate for 80%. The content of octyl acetate was determined by GC. The supercritical fluid extraction showed higher selectivity than conventional steam distillation. Supercritical fluid‐CO₂ for extracting frankincense under optimum condition was of great validity, which was also successfully verified by the pharmacological experiments.     

Application of a gas-liquid entraining rotor to supercritical fluid extraction : Removal of iron(III) from water

Supercritical fluid extraction (SFE) of aqueous solutions is often limited by poor mass transport. The performance of a new gas-liquid entraining device was investigated to improve mass transport and thereby increase extraction efficiency. As a test system, iron(III) was extracted from water with a β-diketone chelating agent (HL) and supercritical fluid carbon dioxide. Metal β-diketonate complexes with sufficient solubility in supercritical fluid CO₂ are often poorly extracted from aqueous solutions due to limited mass transport between the water-soluble metal ion and the CO₂-soluble chelating agent. The new entraining device maximizes contact between the ligand-rich CO₂ phase and the metal ion-rich aqueous phase. Iron(III) was extracted from water with the chelating agent 2,2,7-trimethyl-3,5-octanedione (H(tod)) and supercritical fluid CO₂ at 60 °C and 20.8 MPa. With entrainment, 79% of the iron was removed from the aqueous phase. This represents a three-fold increase in iron extraction efficiency over that of a static system.     

Supercritical carbon dioxide extraction of Sm+3 and Nd+3 from solid matrix using Cyanex 921

The goal of this research was to investigate the feasibility of removing samarium and neodymium ions from solid matrix using Cyanex 921 in supercritical CO₂. The effect of various parameters such as pressure, temperature, extraction time, and stoichiometry of the complexation reaction was studied and optimized. It was found that optimal parameters are, respectively, 9 and 11 MPa, 45°C, 30 min, and 1: 3 (metal: ligand) for both samarium and neodymium. The conditional formation constant for the complexation reaction of samarium and neodymium with Cyanex 921 in the supercritical fluid phase was calculated as log K _d = 1.51 and log K _d = 1.08, respectively.

     

Extraction of norflurazon residues in cotton seeds with supercritical CO2

Summary A new method for the extraction of Norflurazon residues in cotton seeds using supercritical CO₂ as the extracting fluid is described. The supercritical fluid extraction results were compared with those of the classical procedure using liquid extraction. All SFE experiments were performed using a home-made system. The method presented, besides being faster and more economical than existing methods, showed better recovery, with higher selectivity for Norflurazon extraction.     

Supercritical fluid extraction of oxindole alkaloids from Uncaria tormentosa

Supercritical fluid extraction of oxindole alkaloids from Uncaria Tormentosa is described. The extraction was performed with supercritical carbon dioxide alone and with supercritical carbon dioxide modified with 10% metanol, and the extracts were analyzed by GC/MS and HPLC/MS.     

Application of supercritical fluid extraction and supercritical fluid chromatography to the production of taxanes as anti-cancer drugs

The supercritical fluid extraction (SFE) of taxicin from the dried needles of the English yew tree, Taxus baccata is described. Analysis by supercritical fluid chromatography (SFC) and proton NMR spectroscopy was used to confirm identity and purity. The extraction efficiency of SFE is comparable with that obtained using liquid solvents. Such taxanes may be used semi-synthetically to prepare potential anti-cancer drugs.     

Vibrational Spectroscopy in Supercritical Fluids: From Analysis and Hydrogen Bonding to Polymers and Synthesis

Supercritical fluids are beginning to be used widely in chemistry. Applications range from extraction and chromatography in analytical chemistry to solvents for reaction chemistry and preparation of new materials. Spectroscopic monitoring is important in much of supercritical chemistry, and vibrational spectroscopy is particularly useful in this context because the vibrational spectrum of a given molecule is usually quite sensitive to the environment of that molecule. Thus, vibrational spectra are excellent probes of conditions within the fluid. In this review, we describe a variety of techniques and cells for IR and Raman spectroscopy in supercritical fluids and illustrate the breadth of applications in supercritical fluids. The examples include: the use of supercritical Xe as a spectroscopically transparent solvent for chemistry and for supercritical fluid chromatography with FTIR detection of analytes; Raman spectroscopy as a monitor for gases dissolved in supercritical CO₂; the effect of solvent density on hydrogen bonding in supercritical fluids and the formation of reverse micelles; IR as a monitor for the supercritical impregnation/extraction of polymers and the reactions of organometallic compounds impreganated into polymers; reactions of organometallic compounds in supercritical fluids; and finally, the use of miniature flow reactors for laboratory-scale preparative chemistry. Overall, our aim is to provide a starting point from which individual readers can judge whether such measurements might usefully be applied to their own particular problems.