Synthesis of Pb(OH)2/rGO Catalyst for Conversion of Sugar to Lactic Acid in Water

Conversion of sugars from biomass to platform chemicals or fuels is an attracting topic for the utilization of biomass. Pb²⁺ ion is an efficient catalyst for the degradation of sugar to lactic acid, and it will be better to fix lead on a solid catalyst to reduce the risk of exposure of Pb²⁺ to environment. Here, a simple method has been developed to prepare a composite catalyst of Pb(OH)₂/rGO, where the nanoparticles of Pb(OH)₂ in size of 2-5 nm were prepared and fixed over the as-prepared reduced graphene oxide (rGO) nanosheets. The as-obtained catalyst showed an efficient catalytic activity to degrade glucose, fructose, and cellulose in aqueous solution, and the major product is lactic acid. The yield of lactic acid reached 58.7% when fructose was used as the feedstock (433 K and 2.5 MPa N₂), and the catalyst can be recycled with high activity. Cellulose can also be directly converted into lactic acid in aqueous solution over the catalyst without extra acid or alkali, and the maximum yield of lactic acid is 31.7%.     

Preparation of 1-butyl-3-methylimidazolium dodecatungstophosphate and its catalytic performance for esterification of ethanol and acetic acid

1-Butyl-3-methylimidazolium dodecatungstophosphate catalyst ([bmim]₃PW₁₂O₄₀) with high water tolerance was prepared from 1-butyl-3-methylimidazolium bromide ([bmim]Br) and phosphotungstic acid (H₃PW₁₂O₄₀). The catalyst was characterized by means of Fourier transform infrared spectroscopy, thermogravimetry-differential scanning calorimetry, n-BuNH₂ potentiometric titration, elemental analysis and so on. Its catalytic activity for esterification of ethanol and acetic acid to ethyl acetate was measured. The results show that there were three crystal-water molecules in the [bmim]₃PW₁₂O₄₀ catalyst, and it preserved the primary Keggin structure and acid strength of H₃PW₁₂O₄₀. The acid amount of [bmim]₃PW₁₂O₄₀ catalyst was less than that of H₃PW₁₂O₄₀. The [bmim]₃PW₁₂O₄₀ catalyst exhibited higher catalytic activity and reusability in the esterification of ethanol and acetic acid to ethyl acetate. __________ Translated from Chinese Journal of Catalysis, 2008, 29(7) (in Chinese)     

A novel vapor phase process for aromatic ketone synthesis

The vapor phase catalytic reaction between aromatic carboxylic acid and acetic acid was investigated. Many metal oxides catalyzed the reaction between 2methylbenzoic acid (OTA) and acetic acid (AA) to produce 2methylacetophenone (OMA), and weakly acidic oxides such as Th, U, Ce, and La oxide exhibited higher yield of OMA. The OMA yield depended on the catalyst support. SiO₂, Al₂O₃, TiO₂, and ZrO₂ with a surface area of less than 200 m² g^–1 appeared to be suitable as industrial catalyst supports. CeO₂ on Al₂O₃was chosen as an industrial catalyst for the synthesis of OMA because of higher productivity, longer catalyst life, and lifting of legal restrictions on catalyst handling. This catalyst system can also be applied to the syntheses of acetophenone, nitroacetophenone, and chloroacetophenone.     

Silica supported orthophosphoric acid (H3PO4. SiO2): a green,heterogeneous catalyst for solvent-free oxathioacetalization of aldehydes

Abstract

A silica supported orthophosphoric acid catalyst (H₃PO₄. SiO₂) was prepared by stirring silica gel (100–200mesh) with orthophosphoric acid in chloroform at room temperature. The catalyst was characterized by scanning electron microscopy (SEM) and energy dispersion analytical X-ray (EDX). It demonstrated excellent activity, chemoselectivity, and recyclability for oxathioacetalization of aldehydes.     

n-Hexane Isomerization by Pt/WO3-ZrO2 Using Hydrothermally Synthesized Hydrous Zirconia as Support

A series of hydrous zirconia samples were prepared by the hydrothermal method, and the Pt/WO₃-ZrO₂ catalyst was prepared by impregnation. The effects of hydrothermal temperature of Zr(OH)₄ on the isomerization activity of the catalyst was investigated. The crystalline structure, acidity, and reduction properties of the catalyst were characterized by X-ray diffraction, NH₃ temperature-programmed desorption, and H₂ temperature-programmed reduction, respectively. The results indicated that the crystalline structure of hydrous zirconia and the catalyst varied with the hydrothermal temperature, and the increase of hydrothermal temperature reduced the fraction of tetragonal zirconia. Strong acid sites on the catalyst and the isomerization activity increased with the crystallization of Zr(OH)₄. It was proposed that the higher isomerization activity may be related to the existence of large numbers of strong acid sites.     

碱土金属氧化物改性ZrO2催化1,4-丁二醇选择性脱水合成3-丁烯-1-醇

采用浸渍法制备了碱土金属氧化物CaO,SrO或BaO改性的ZrO₂酸碱双功能催化剂,借助X射线衍射、低温N₂物理吸附、NH₃和CO₂程序升温脱附等手段表征了催化剂的结构、织构以及表面酸碱性质,并考察了其催化1,4-丁二醇选择性脱水合成3-丁烯-1-醇的反应性能.结果表明,碱土金属氧化物的引入显著调变了催化剂表面的酸性和碱性中心,进而对1,4-丁二醇转化率和3-丁烯-1-醇选择性产生重要影响.其中,CaO改性的ZrO₂样品中形成了大量的Ca-O-Zr结构,在ZrO₂表面形成大量碱性位点的同时,保持了较高的酸密度;而SrO和BaO改性的样品中生成了相应的锆酸盐,ZrO₂表面的酸密度呈现不同程度的下降.因此,CaO/ZrO₂催化剂表现出最优的催化活性和3-丁烯-1-醇选择性,350℃时,3-丁烯-1-醇收率最高,达60.5%.催化剂表面的酸碱协同作用是选择性合成3-丁烯-1-醇的关键因素.     

Asymmetric Aza-Diels–Alder Reaction with Ion-Paired—Iron Lewis Acid—Brønsted Acid Catalyst

The development and use of a multiple-activation catalyst with ion-paired Lewis acid and Brønsted acid in an asymmetric aza-Diels–Alder reaction of simple dienes (non-Danishefsky-type electron-rich dienes) was achieved by utilizing the [FeBr₂]⁺[FeBr₄]⁻ combination prepared in situ from FeBr₃ and chiral phosphoric acid. Synergistic effects of the highly active ion-paired Lewis acid [FeBr₂]⁺[FeBr₄]⁻ and a chiral Brønsted acid are important for promoting the reaction with high turnover frequency and high enantioselectivity. The multiple-activation catalyst system was confirmed using synchrotron-based X-ray absorption fine structure measurements, and theoretical studies. This study reveals that the developed catalyst promoted the reaction not only by the interaction offered by the ion-paired Lewis acid and the Brønsted acid but also noncovalent interactions.     

SO42-/SnO2-硅藻土型固体酸的制备及其对正丁酸与异戊醇的催化酯化

采用质量比为1∶3的SnCl₄·5H₂O和硅藻土制备的硅藻土Sn(OH)₄溶胶,70 ℃老化12 h,90 ℃干燥12 h、3.0 mol/L硫酸浸渍3 h、550 ℃焙烧3.5 h,制备了SO₄^2-/SnO₂硅藻土型固体酸催化剂。 利用IR、 XRD、TG测试技术表征了催化剂的理化性质。 用于催化正丁酸与异戊醇的酯化反应,当n（异戊醇）∶n（正丁酸）=1.4∶1、催化剂用量为反应物总质量的2.5%、10 mL苯、反应时间70 min时,酯收率为97.7％。 结果表明,该催化剂兼具多元氧化物型固体酸和硫酸酸化改性天然粘土固体酸催化剂的优点,催化活性高,成本低廉、制备方法简单并可适当回收循环使用。     

Highly efficient heterogeneous acylations of aromatic compounds with acid anhydrides and carboxylic acids by montmorillonite-enwrapped titanium as a solid acid catalyst

Montmorillonite-enwrapped titanium hydroxide species (Ti⁴⁺-mont) acted as a highly efficient heterogeneous acid catalyst for the acylation of aromatic compounds with acid anhydrides or carboxylic acids. The catalytic activity of the Ti⁴⁺-mont was higher than those of other acid catalysts such as zeolites, SO ₄ ²⁻ /ZrO₂ and p-toluenesulfonic acid. For example, the reaction of anisole with dodecanoic acid in the presence of the Ti⁴⁺-mont catalyst gave 1-(4-methoxyphenyl)-1-dodecanone in 97% yield. Furthermore, the Ti⁴⁺-mont catalyst was easily separated from the reaction mixture and was recyclable.     

应用原位漫反射红外-质谱技术研究CuO/Al2O3催化剂表面酸性及其反应性能

应用原位漫反射红外-质谱联用、程序升温和暂态响应技术研究了CuO/Al₂O₃催化剂表面酸性及其反应性能. 实验结果表明, CuO/Al₂O₃催化剂表面呈Lewis酸性, 硫化不仅可增强CuO/Al₂O₃催化剂的Lewis酸性, 而且可产生新的Brønsted酸性位; 吸附于Lewis酸性位的NH₃具有选择性催化还原(SCR)活性. 而在硫化样Cu8(400S)中Lewis和Brønsted酸性位同时存在的情况下, 吸附于Lewis和Brønsted酸性位的氨均具有SCR活性, 且后者较前者弱; CuO/Al₂O₃催化剂上的SCR反应遵循Eley-Rideal机理, 即SCR反应发生于吸附态NH₃与气相NO之间.     

Green synthesis of 3,4-dihydropyrimidinones using nano Fe3O4@meglumine sulfonic acid as a new efficient solid acid catalyst under microwave irradiation

Design, synthesis and characterization of nano Fe₃O₄@meglumine sulfonic acid as a new solid acid catalyst for the simple and green one pot multicomponent synthesis of 3,4-dihydropyrimidin-2(1H)-ones/thiones was studied. New solid acid catalyst was prepared through a clean and simple protocol and characterized using FTIR, VSM, TGA, SEM, elemental analysis (CHN) and XRD techniques. Heterogenization of homogeneous catalyst as a green approach is a useful method for enhancing the efficiency of catalyst. Presented study was a new method for attachment of homogeneous highly soluble catalyst (meglumine sulfate) to the magnetite nanoparticle surfaces for preparing a heterogeneous and effective catalyst. Obtained heterogeneous and reusable solid acid catalyst has high performance in the synthesis of Biginelli compounds. The reaction was performed under microwave irradiation as a rapid and green condition. Easy work up as well as excellent yield (90–98%) of products in short reaction times (40–200 s) and reusable catalyst are the main advantages of presented procedure. Reaction products were characterized in details using physical and chemical techniques such as melting point, ¹H NMR, ¹³C NMR and FTIR.     

Ytterbium(III) triflate: An efficient and simple catalyst for isomerization of 2′‐hydroxychalcone and 2′‐aminochalcones in ionic liquid

Isomerization of 2′‐hydroxychalcone and 2′‐aminochalcone have been investigated using ytterbium(III) trifluromethanesulfonate {Yb(OTf)₃} (30 mol %) as Lewis acid catalyst in [bmim][BF₄] ionic liquid. The effect of different metal triflates as Lewis acid, catalyst loading and reaction media was studied for this isomerization reaction. Advantages of the methodology include short reaction time, excellent yields, catalytic use of Lewis acid, and recovery and reuse of the catalyst. J. Heterocyclic Chem., (2011).     

POLYKETONE FROM ETHYLENE WITH CARBON MONOXIDE CATALYZED BY NOVEL CATALYST SYSTEMS BASED ON COPPER WITH BIDENTATE PHOSPHORUS CHELATING LIGANDS

Copolymerization of ethylene with carbon monoxide was pertormed with Cu catalyst systems. Novel catalystsystems based on Cu (Cu(CH_3COO)_2/ligand/acid) were firstly reported for the copolymerization of ethylene with carbonmonoxide, in which the ligand was a bidentate phosphorus chelating ligand. The experimental results showed that this kindof Cu catalyst system exhibited high activity. When DPPP (1, 3-bis(diphenylphosphine)propane) and CH_3COOH were usedas ligand and acid, the corresponding catalyst system had the best activity of 108.1 g copolymer/(gCu·h). The novel Cu catalyst system had the advantages of high stability and low cost.     

Cr掺杂的丙烷选择氧化制丙烯酸高效催化剂

在丙烷选择氧化制丙烯酸催化剂MoVTeNbOx的活性相M1基础上掺杂一定量的Cr,当Cr/Nb摩尔比为0.002时,催化剂具有很高的丙烯酸选择性(78.3%)和收率(50.7%);并采用X射线衍射、X射线光电子能谱、程序升温还原、O2程序升温脱附、NH3程序升温脱附和异丙醇氧化等手段对催化剂的构效关系进行了探讨.结果表明,适量Cr的添加可调节催化剂表面Mo6+,V5+和Te4+等物种含量,提高催化剂的氧化能力,使丙烷转化率增加.同时,适量Cr的添加使得催化剂表面酸强度下降,酸性位点数量减少,从而抑制丙烯酸的深度氧化,提高了丙烯酸选择性.     

磺酸官能化的磁性核壳结构的纳米材料用于果糖脱水制备5-羟甲基糠醛(英)

通过反相微乳液法制备了以Fe₃O₄为核,磺酸官能化的硅基材料为壳层的磁性酸性催化剂.首先制备纳米Fe₃O₄磁核,然后涂层包覆苯基修饰的纳米级硅层,最后进行苯基磺化修饰,制得固体酸催化剂Fe₃O₄@Si/Ph-SO₃H.在果糖脱水制备5-羟甲基糠醛反应中,该催化剂表现出较好的催化活性,优于传统催化剂A-15,且与均相无机酸催化活性相当.当采用二甲基亚砜作溶剂,在110℃下反应3 h,果糖转化率达到99%,5-羟甲基糠醛收率为82%.另外,该催化剂经磁法回收后可多次重复使用.     

Silica chloride (SiO2-Cl) catalyzed one pot synthesis of 2,3-disubstituted-thiazolidin-4-one

Abstract

In this paper, we report one-pot, three-component cyclo condensation of an aldehyde, an amine and thioglycolic acid to form 2,3-disubstituted-thiazolidin-4-one by using supported protic acid (Silica Chloride: SiO₂-Cl) catalyst. The catalyst SiO₂-Cl is compatible with a variety of aldehydes (aryl/heteroaryl) and the aromatic amines affording 2,3-disubstituted-thiazolidin-4-one analogs in 72–89% yields. Moreover, the supported catalyst was recycled several times without significant loss of catalytical activity     

Highly efficient heterogeneous acylations of aromatic compounds with acid anhydrides and carboxylic acids by montmorillonite-enwrapped titanium as a solid acid catalyst

Montmorillonite-enwrapped titanium hydroxide species (Ti⁴⁺-mont) acted as a highly efficient heterogeneous acid catalyst for the acylation of aromatic compounds with acid anhydrides or carboxylic acids. The catalytic activity of the Ti⁴⁺-mont was higher than those of other acid catalysts such as zeolites, SO ₄ ^2? /ZrO₂ and p-toluenesulfonic acid. For example, the reaction of anisole with dodecanoic acid in the presence of the Ti⁴⁺-mont catalyst gave 1-(4-methoxyphenyl)-1-dodecanone in 97% yield. Furthermore, the Ti⁴⁺-mont catalyst was easily separated from the reaction mixture and was recyclable.     

Preparation and characterization of Cu supported on 2-(1H-benzo[d]imidazol-2-yl)aniline-functionalized Fe3O4 nanoparticles as a novel magnetic catalyst for Ullmann and Suzuki cross-coupling reactions

Copper supported on 2-(1H-benzo[d]imidazol-2-yl)aniline (BIA)-functionalized Fe₃O₄ nanoparticles (Cu-BIA-Si-Fe₃O₄) as a novel magnetic catalyst was designed and used for the synthesis of new products via Ullmann and Suzuki cross-coupling reactions. The Ullmann reaction was performed by mixing arylboronic acid with aniline derivatives in dimethylsulfoxide solvent. Also, diaryls were synthesized via Suzuki C–C reactions between aryl halides and phenylboronic acid in the same solvent. The prepared materials and catalyst were characterized with various analytical techniques. The Cu-BIA-Si-Fe₃O₄ catalyst demonstrated catalytic efficiency with good to excellent yields for both types of reactions in comparison with commercial palladium catalysts. Also, the catalyst could be recovered by a simple filtration and retained its activity even after several cycles.     

NH_4~+对甲酸在炭载Pd催化剂上氧化性能的影响

为了解HClO4、NH4ClO4和NaClO4电解液对炭载Pd(Pd/C)催化剂电极对甲酸氧化的电催化性能的影响,在用X射线衍射(XRD)谱、能量色散谱(EDS)和透射电子显微镜(TEM)对Pd/C催化剂进行表征的基础上,采用电化学方法测量了Pd/C催化剂在不同电解液中对甲酸氧化的电催化性能.发现在不同电解液中,Pd/C催化剂对甲酸氧化的电催化活性和稳定性按NH4ClO4NaClO4HClO4的次序降低.由于甲酸的存在,不同电解液的pH相差较小,因此,电解液的pH影响较小,而阳离子的影响较大.在NaClO4电解液中的性能优于在HClO4电解液中的性能是pH的影响.在NH4ClO4电解液中的性能优于在NaClO4电解液中是由于NH4+能降低CO在Pd/C催化剂电极上的吸附强度和吸附量,这一发现对提高直接甲酸燃料电池(DFAFC)的性能很有意义.     

Biodiesel production via esterification of oleic acid catalyzed by MnO2@Mn(btc) as a novel and heterogeneous catalyst

The main objective of this study is to develop efficient and environmentally benign heterogeneous catalysts for biodiesel production. For this purpose, a heterogeneous MnO₂@Mn(btc) catalyst was prepared by the solvothermal method, and the prepared catalyst was tested for the esterification of oleic acid. Various techniques such as X‐ray diffraction, scanning and transmission electron microscopy, Brunauer–Emmett–Teller (BET) method, infrared spectroscopy, thermogravimetry, and NH₃‐TPD (temperature programmed desorption) analysis were employed for the characterization of the solid catalyst. The solid catalyst with MnO₂@Mn(btc) loading of 15% showed high catalytic activity and long durability in the esterification of oleic acid, in which the fatty acid methyl ester yield reached 98% consecutively for at least five cycles under mild conditions.