海上平台结构疲劳与疲劳可靠性分析程序设计

本文介绍了作者开发的适用于固定式导管架海上平台结构系统疲劳与疲劳可靠性分析程序系统的设计原理、结构及功能特点。最后，以一固定式导管架平台作为算例验证了程序系统的可靠性与实用性。     

Vertex solution theorem for the upper and lower bounds on the dynamic response of structures with uncertain-but-bounded parameters

The aim of this paper is to evaluate the effects of uncertain-but-bounded parameters on the dynamic response of structures. By combining the interval mathematics and the finite element analysis, the mass matrix, damping matrix, stiffness matrix and the external loads are represented as interval matrices and vector. With the help of the optimization theory, we present the vertex solution theorem for determining both the exact upper bounds or maximum values and the exact lower bounds or minimum values of the dynamic response of structures, in which these parameters reach their extreme values on the boundary of the interval mass, damping, stiffness matrices and the interval extemal loads vector. Three examples are used to illustrate the computational aspects of the presented vertex solution theorem.     

Stochastic boundary element method for reliability analysis of plate and beams composite structures

I.IntroductionTheengineeringstructuresareoftells,'1>:'rectcdtotheactionofthestochasticloadingthatvarieswiththetime,forexample,theengineeringstructuresactedonbytheearthquake,theoceanstructuresactedonbydynamicpressure,andthevehiclesofthetransportationinflue…     

Sliding mode maneuvering control and active vibration damping of three-axis stabilized flexible spacecraft with actuator dynamics

This paper presents a dual-stage control system design method for the three-axis-rotational maneuver control and vibration stabilization of a spacecraft with flexible appendages embedded with piezoceramics as sensor and actuator. In this design approach, the attitude control system and vibration suppression were designed separately using a lower order model. Based on the sliding mode control (SMC) theory, a discontinuous attitude control law in the form of the input voltage of the reaction wheel is derived to control the orientation of the spacecraft actuated by the reaction wheel, in which the reaction wheel dynamics is also considered from the real applications point of view. The asymptotic stability is shown using Lyapunov analysis. Furthermore, an adaptive version of the proposed attitude control law is also designed for adapting the unknown upper bounds of the lumped disturbance so that the limitation of knowing the bound of the disturbance in advance is released. In addition, the concept of varying the width of boundary layer instead of a fixed one is also employed to eliminate the chattering and improve the pointing precision as well. For actively suppressing the induced vibration, modal velocity feedback and strain rate feedback control methods are presented and compared by using piezoelectric materials as additional sensors and actuators bonded on the surface of the flexible appendages. Numerical simulations are performed to show that rotational maneuver and vibration suppression are accomplished in spite of the presence of disturbance torque and parameter uncertainty.     

Dynamic modelling and active vibration control of a submerged rectangular plate equipped with piezoelectric sensors and actuators

The active vibration control of a rectangular plate either partially or fully submerged in a fluid was investigated. Piezoelectric sensors and actuators were bonded to the plate, and the assumed mode method was used to derive a dynamic model for the submerged plate. The properties of the piezoelectric actuators and sensors, as well as their coupling to the structure, were used to derive the corresponding equations of their behaviour. The fluid effect was modelled according to the added virtual mass obtained by solving the Laplace equation. The natural vibration characteristics of the plate both in air and in water were obtained theoretically and were found to be consistent with the experimental results, and the changes in the natural frequencies resulting from submersion in fluid can be accurately predicted. A multi-input, multi-output positive position feedback controller was designed by taking the natural vibration characteristics into account and was then implemented by using a digital controller. The experimental results show that piezoelectric sensors and actuators along with the control algorithm can effectively suppress the vibration of a rectangular plate both in air and submerged in a fluid.     

智能结构有限元动力模型的建立及主动振动控制和抑制

采用一种新的压电板单元，建立了含有分布压电传感元件和执行元件结构（智能结构）的有限元动力模型。利用两种反馈控制律，研究了智能结构振动控制与抑制的问题，并提出了智能结构主动振动控制和抑制的一种方法。最后，提供了数值示例，说明本文提出方法的应用。     

A method for estimating the reliability of structural systems with moment-matching and copula concept

It is aimed to propose a copula based systematic quantitative method for system reliability analysis of engineering structures considering multiple dependent failure modes. The principles of the moment matching method, the copula theory and the bound theory are combined to achieve the purpose. As the very first step, the moment estimation of the limit state function of each component is calculated by anchored ANOVA (Analysis of Variance) expansion. The third moment saddle point approximation is then applied to derive the distribution of each performance function and evaluate the reliability index with obtained moments. By introducing copula functions into the narrow bounds theory, the traditional reliability method is improved. The best-fitting copula function is determined to ensure the accuracy of the joint probabilistic modeling between the dependent failure modes. A novel feature of the proposed method is the use of the copula concept, instead of traditional numerical integration commonly used in the joint failure probability estimation. Examples are presented to illustrate the accuracy and applicability of the presented method.     

Simulation-based conceptual design of an acoustic metamaterial with full band gap using an air-based 1-3 piezoelectric composite for ultrasonic noise control

This paper aims at proposing a novel type of acoustic metamaterials with complete band gap composed of piezoelectric rods with square array as inclusions embedded in an air background (matrix). A modified plane wave expansion method accompanied with the principles of the Bloch–Floquet method with electromechanical coupling effect and also impedance spectra are used to get a band frequency and to investigate the passband for the selected cut of piezoelectric rods. We investigate both the electromechanical coupling coefficient and mechanical quality factor and their dependency to passband and bandwidth, which depends on both the density and the wave impedance of the matrix and the inclusions (rods). The ratio of the volume of inclusion to the matrix is used to define the fill factor or the so-called inclusion ratio, to introduce the bandwidth as a function of that. Furthermore, the fabrication method is presented in this paper. The results make a suitable foundation for design purposes and may develop an inherently passive ultrasonic noise control. In addition, the results provide the required guidance for a simulation-based design of elastic wave filters or wave guide that might be useful in high-precision mechanical systems operated in certain frequency ranges and switches made of piezoelectric materials; they also propose a novel type of elastic metamaterials, which is independent of the wave direction and has an equal sensitivity in all directions in which it reacts omnidirectionally and mitigates the occupational noise exposure.     

Adaptive finite element method for an optimal control problem of Stokes flow with L2‐norm state constraint

An adaptive finite element approximation for an optimal control problem of the Stokes flow with an L²‐norm state constraint is proposed. To produce good adaptive meshes, the a posteriori error estimates are discussed. The equivalent residual‐type a posteriori error estimators of the H ¹‐error of state and L²‐error of control are given, which are suitable to carry out the adaptive multi‐mesh finite element approximation. Some numerical experiments are performed to illustrate the efficiency of the a posteriori estimators. Copyright © 2011 John Wiley & Sons, Ltd.