Cobalt ion-doped polyaniline,poly(N-methylaniline), and poly(N-ethylaniline): electrosynthesis and characterisation using electrochemical methods in acidic solutions

Cobalt ion (Co²⁺)-doped polyaniline (PANI-Co), poly(N-methylaniline) (PNMA-Co), and poly(N-ethylaniline) (PNEA-Co) films were synthesised electrochemically on a pencil graphite electrode (PGE) and their electrochemical properties were investigated for supercapacitor applications. The polymer film-coated electrodes (PGE/PANI-Co, PGE/PNMA-Co, and PGE/PNEA-Co) thus obtained were characterised by scanning electron microscopy (SEM) and different electrochemical methods. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements were employed in 0.1 M H₂SO₄ solution to calculate the specific capacitance (C _S) values of the electrodes. The maximum C _S of 192.94 F g^?1, 139.83 F g^?1, and 47.12 F g^?1 were achieved for PGE/PANI-Co, PGE/PNMA-Co, and PGE/PNEA-Co at 1 mV s^?1, respectively. On the other hand, the charge/discharge stability of the electrodes was analysed using the repeating chronopotentiometry (RCP) method. The RCP measurements indicate that the electrodes could be used as an electrode active material for low voltage supercapacitor applications.     

Conducting poly(o-anisidine)-coated steel electrodes for supercapacitors

Conducting poly(o-anisidine) coatings were obtained on low carbon steel in aqueous oxalic acid solution by using the galvanostatic technique. The coatings were characterised by potential-time relations, UV-VIS absorption spectroscopy, scanning electron microscopy, and X-ray diffraction measurements. The electrochemical performance of coated steel electrodes was evaluated on the basis of galvanostatic charge-discharge performance and electrochemical impedance spectroscopy in 0.5 M H₂SO₄. Maximum charging current was found in the case of the coating obtained at a current density of 8 mA cm^?2 for 600 s duration at the supply voltage of 0.5 V. The estimated capacitance of the coated steel electrode for charging is 42.67 mF and 7.2 mF for discharging. It was also found that there was an increase in capacitance as a function of supply voltage and the maximum value was obtained at 0.5 V. The study reveals the possibility of using conducting poly(o-anisidine)-coated low carbon steel from oxalic acid medium as supercapacitor electrode materials.     

Fabrication and the electrochemical activation of network-like MnO<Subscript>2</Subscript> nanoflakes as a flexible and large-area supercapacitor electrode

Porous network-like MnO₂ thick films are successfully synthesized on a flexible stainless steel (SS) mesh using a simple and low-cost electrodeposition method followed by an electrochemical activation process. Morphology, chemical composition, and crystal structure of the prepared electrodes before and after the activation process are determined and compared by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) analyses. The results show that the implementation of the electrochemical activation process does not change the chemical composition and crystal structure of the films, but it influences the surface morphology of the MnO₂ thick layer to a flaky nanostructure. Based on the electrochemical data analysis, the maximum specific capacitance of 1400 mF (381 F g^?1) and 3700 mF (352 F g^?1) are measured for small (2.6 cm²) and large (10 cm²) surface area electrodes, respectively. In addition, a flexible symmetric MnO₂//MnO₂ solid-state supercapacitor shows a capacitance of 0.3 F with about 98% retention at different bending angles from 0 to 360°.     

Conducting Polyaniline Nanowire Arrays Modified Electrode for High Performance Supercapacitor and Enhanced Catalysis of Nitrite Reduction

Vertically aligned conducting polymer nanowire arrays had great potential applications in supercapacitor electrode material and exhibited enhanced electrocatalytic behavior towards the reduction of nitrite. In this paper, a facial template‐free approach to synthesize large arrays of vertically aligned polyaniline (PANI) nanowires on electrochemically pretreated glassy carbon electrodes was reported by using a galvanostatic current method. The as‐prepared large arrays of PANI nanowires had very narrow diameters and were oriented perpendicular to the substrate, which was a benefit to the ion diffusion when being used as the supercapacitor electrode. The highest specific capacitance of PANI nanowire arrays was measured and kept high at a large charge‐discharge current density. Furthermore, it also can detect nitrite with ultrahigh sensitivity of 62.99 µA mM^?1 cm^?2 and a remarkable fast response time of less 1 s. The results indicated that the vertically aligned PANI nanowires could dramatically enhance the electrochemical performance.     

Electrodeposition of polyaniline on high electroactive indium tin oxide nanoparticles-modified fluorine doped tin oxide electrode for fabrication of high-performance hybrid supercapacitor

In this study, hierarchical polyaniline (PANI) nanosheets were electrochemically deposited on indium tin oxide nanoparticles coated fluorine-doped tin oxide glass (ITONPs-FTO) substrate from an aqueous solution containing 0.5 M aniline and 1 M H₂SO₄. The ITONPs provide efficient support with high electroactive surface area in the electrochemical deposition of PANI and produce excellent PANI films. The developed PANI film deposited on the ITONPs-FTO electrode was characterized via field-emission scanning-electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. A hybrid supercapacitor (HSC) was fabricated using the developed PANI deposited ITONPs-FTO as a positrode and the jute sticks derived activated carbon nanosheets coated FTO (JAC-FTO) as a negatrode. Because of its high capacitive performance, unique structures of electrode materials, and optimum operating potential window, the fabricated PANI-ITONPs-FTO//JAC-FTO HSC performed excellently in 0.1 M HCl aqueous electrolyte, delivering a high areal capacitance of 318 mF/cm² at a 1.0 mA/cm² current density and exhibit a high energy density of 28 µWh/cm² at a high power density of 400 µW/cm². Moreover, the HSC exhibits excellent cyclic stability with ～ 87% Coulombic efficiency and ～ 91% capacitance retention after 1000 charge–discharge cycles.     

Conjugated Copper–Catecholate Framework Electrodes for Efficient Energy Storage

A conjugated copper(II) catecholate based metal–organic framework (namely Cu‐DBC) was prepared using a D₂‐symmetric redox‐active ligand in a copper bis(dihydroxy) coordination geometry. The π‐d conjugated framework exhibits typical semiconducting behavior with a high electrical conductivity of ca. 1.0 S m^?1 at room temperature. Benefiting from the good electrical conductivity and the excellent redox reversibility of both ligand and copper centers, Cu‐DBC electrode features superior capacitor performances with gravimetric capacitance up to 479 F g^?1 at a discharge rate of 0.2 A g^?1. Moreover, the symmetric solid‐state supercapacitor of Cu‐DBC exhibits high areal (879 mF cm^?2) and volumetric (22 F cm^?3) capacitances, as well as good rate capability. These metrics are superior to most reported MOF‐based supercapacitors, demonstrating promising applications in energy‐storage devices.     

Electrochemical synthesis and investigation of poly(1,4-bis(2-(3,4-ethylenedioxy)thienyl)benzene) and its application in an electrochromic device

1,4-Bis(2-(3,4-ethylenedioxy)thienyl)benzene, prepared by Stille cross-coupling reaction was successfully electrochemically polymerized to give polymer 1,4-bis(2-(3,4-ethylenedioxy)thienyl)benzene (PEBE). Characterizations of the resulting polymer PEBE were performed by cyclic voltammetry (CV), UV–vis, Fourier transform infrared spectroscopy and scanning electron microscopy. Moreover, the spectroelectrochemical and electrochromic properties of the polymer film were investigated. The resulting polymer film has distinct electrochromic properties and shows three different colors (deep red, gray, and light blue) under various potentials. At the dedoped state of the polymer, the π–π* transition absorption peak is located at 510?nm and the optical band gap (E _g) was calculated as 1.92?eV. The PEBE film shows a maximum optical contrast (ΔT%) of 31.0?% at 500?nm with a response time of 0.85?s. The coloration efficiency of PEBE film was calculated to be 182.2?cm²C^?1. An electrochromic device (ECD) based on PEBE and poly(3,4-ethylenedioxythiophene) was also constructed and characterized. The response time was measured as 0.4?s, and the coloration efficiency of the device was calculated to be 225.4?cm²C^?1. Furthermore, this ECD exhibited satisfactory optical memories and redox stability.     

Strong and Robust Polyaniline‐Based Supramolecular Hydrogels for Flexible Supercapacitors

We report a supramolecular strategy to prepare conductive hydrogels with outstanding mechanical and electrochemical properties, which are utilized for flexible solid‐state supercapacitors (SCs) with high performance. The supramolecular assembly of polyaniline and polyvinyl alcohol through dynamic boronate bond yields the polyaniline–polyvinyl alcohol hydrogel (PPH), which shows remarkable tensile strength (5.3 MPa) and electrochemical capacitance (928 F g^?1). The flexible solid‐state supercapacitor based on PPH provides a large capacitance (306 mF cm^?2 and 153 F g^?1) and a high energy density of 13.6 Wh kg^?1, superior to other flexible supercapacitors. The robustness of the PPH‐based supercapacitor is demonstrated by the 100 % capacitance retention after 1000 mechanical folding cycles, and the 90 % capacitance retention after 1000 galvanostatic charge–discharge cycles. The high activity and robustness enable the PPH‐based supercapacitor as a promising power device for flexible electronics.     

基于含锌有机配位聚合物的微孔碳的合成及其电化学性能

报道了一种基于含锌(II)有机配位聚合物制备微孔碳的新方法. 通过锌离子和酒石酸之间的配位作用获得含锌有机配位化合物, 并通过氢键作用将其引入到间苯二酚/甲醛低聚物溶胶的开放网络结构中. 使含锌有机配位化合物和酚醛低聚物溶胶体系发生共聚反应得到酚醛和含锌有机配位共聚物, 在950℃下热处理分解以及锌蒸气蒸发后制得微孔碳. 微孔碳材料典型样品具有相对较大以及比较规则的微孔, 其比表面积可以达到1260 m²·g^-1, 孔体积为0.63 cm³·g^-1. 所得微孔碳作为超级电容器电极材料的等效串联电阻为0.46 Ω, 其循环伏安曲线展示出较好的矩形性. 恒流充放电分析结果表明, 当电流密度为1 A·g^-1时, 微孔碳电极的比电容为196 F·g^-1; 在10 A·g^-1的大电流密度下, 比电容仍然达到137 F·g^-1. 该电极具有优良的循环稳定性, 1000次循环后比电容保持率达到98%. 这一研究结果表明, 所得微孔碳在超级电容器电极材料方面具有重要的应用前景.     

Electrosynthesis of poly(o-phenylenediamine) in a room temperature ionic liquid

Poly-o-phenylenediamine (PoPD) thin films were synthesized electrochemically on platinum electrodes in the room temperature ionic liquid (IL) N-butyl-N-methylpyrrolidinium (nonafluorobutanesulfonyl)-(trifluoromethanesulfonyl)imide (PYR₁₄IM₁₄). The polymer films were further characterized by electrochemical analysis and the results are compared with those obtained in conventional H₂SO₄ aqueous solution. The polymer films obtained in the IL-based electrolyte showed a good adherence on Pt and appeared attractive for the realization of biosensors since they showed a good selectivity with respect to the most common interferent compounds. PoPD films deposited from IL-based electrolytes were investigated in solutions containing compounds as ascorbate and acetaminophen, which are common interferents in electrochemical biosensor analysis, and proved satisfying for application in biosensors.     

Free‐Standing Conducting Polymer Films for High‐Performance Energy Devices

Thick, uniform, easily processed, highly conductive polymer films are desirable as electrodes for solar cells as well as polymer capacitors. Here, a novel scalable strategy is developed to prepare highly conductive thick poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (HCT‐PEDOT:PSS) films with layered structure that display a conductivity of 1400 S cm^?1 and a low sheet resistance of 0.59 ohm sq^?1. Organic solar cells with laminated HCT‐PEDOT:PSS exhibit a performance comparable to the reference devices with vacuum‐deposited Ag top electrodes. More importantly, the HCT‐PEDOT:PSS film delivers a specific capacitance of 120 F g^?1 at a current density of 0.4 A g^?1. All‐solid‐state flexible symmetric supercapacitors with the HCT‐PEDOT:PSS films display a high volumetric energy density of 6.80 mWh cm^?3 at a power density of 100 mW cm^?3 and 3.15 mWh cm^?3 at a very high power density of 16160 mW cm^?3 that outperforms previous reported solid‐state supercapacitors based on PEDOT materials.     

MWCNTs/metal (Ni, Co, Fe) oxide nanocomposite as potential material for supercapacitors application in acidic and neutral media

Supercapacitive properties of synthesised metal oxides nanoparticles (MO where M = Ni, Co, Fe) integrated with multi-wall carbon nanotubes (MWCNT) on basal plane pyrolytic graphite electrode (BPPGE) were investigated. Successful modification of the electrode with the MWCNT-MO nanocomposite was confirmed with spectroscopic and microscopic techniques. Supercapacitive properties of the modified electrodes in sulphuric acid (H₂SO₄) and sodium sulphate (Na₂SO₄) electrolytes were investigated using cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic constant current charge–discharge (CD) techniques. The specific capacitance values followed similar trend with that of the cyclic voltammetry and the electrochemical impedance experiments and are slightly lower than values obtained using the galvanostatic charge–discharge cycling. MWCNT-NiO-based electrode gave best specific capacitance of 433.8 mF?cm^?2 (ca 2,119 F?g^?1) in H₂SO₄. The electrode exhibited high electrochemical reproducibility with no significant changes over 1,000 cyclic voltammetry cycles.     

Polypyrrole Shell@3D‐Ni Metal Core Structured Electrodes for High‐Performance Supercapacitors

Three‐dimensional (3D) nanometal films serving as current collectors have attracted much interest recently owing to their promising application in high‐performance supercapacitors. In the process of the electrochemical reaction, the 3D structure can provide a short diffusion path for fast ion transport, and the highly conductive nanometal may serve as a backbone for facile electron transfer. In this work, a novel polypyrrole (PPy) shell@3D‐Ni‐core composite is developed to enhance the electrochemical performance of conventional PPy. With the introduction of a Ni metal core, the as‐prepared material exhibits a high specific capacitance (726 F g^?1 at a charge/discharge rate of 1 A g^?1), good rate capability (a decay of 33 % in C_sp with charge/discharge rates increasing from 1 to 20 A g^?1), and high cycle stability (only a small decrease of 4.2 % in C_sp after 1000 cycles at a scan rate of 100 mV s^?1). Furthermore, an aqueous symmetric supercapacitor device is fabricated by using the as‐prepared composite as electrodes; the device demonstrates a high energy density (≈21.2 Wh kg^?1) and superior long‐term cycle ability (only 4.4 % and 18.6 % loss in C_sp after 2000 and 5000 cycles, respectively).     

Proton-conducting membranes: poly (N-vinyl pyrrolidone) complexes with various ammonium salts

The present study focuses on the proton-conducting polymer electrolytes; poly (N-vinyl pyrrolidone)–ammonium thiocyanate and poly (N-vinyl pyrrolidone)–ammonium acetate prepared by solution casting technique. The XRD analysis indicates the amorphous nature of the polymer electrolytes. The Raman spectra of the C=O vibration of pure polymer PVP at 1,663 cm^?1 has been appeared as doublet in the polymer electrolytes. The introduction of this new peak in the salt-doped polymer electrolytes may be due to interaction of the cation with the polymer. The room temperature ionic conductivity σ _303κ has been found to be high, 1.7?×?10^?4 S cm^?1 for 80 mol% PVP–20 mol% NH₄SCN and 1.5?×?10^?6 S cm^?1 for 75 mol% PVP–25 mol% CH₃COONH₄. The polymer electrolytes have been tested for their application in Zn–air battery.     

Optical constants of electrochemically synthesized polyindole and poly(5-carboxilic acid indole)

The optical properties and optical constants of the polyindole and poly(5-carboxilic acid indole) conductive polymers synthesized and doped electrochemically with ClO ₄ ^? in acetonitrile solution were investigated by means of transmittance and reflectance spectra, in the wavelength range of 300–800 nm. Absorption band centered at 425 nm assigned to the direct allowed electron transition (π → π*) from valence band to the conduction band. The optical band gap, E _g , was determined out of the optical absorption spectra. The E _g increases from 2.17 eV for polyindole film to 2.40 eV for poly(5-carboxilic acid indole) polymer thin film, which is attributed to the effect of electron withdrawing carboxylic acid functional group on the growth of chain length of the polymer during the electropolymerization. The oscillator energy E ₀, dispersion energy E _d and other parameters were determined by the Wemple-DiDomenico method.     

Electrodeposition of Three‐Dimensional Porous Platinum Film on Removable Polyaniline Template for High‐Performance Electroanalysis

Three‐dimensional porous platinum (Pt_por) films are prepared based on Pt electrodeposition on polyaniline (PANI) modified electrodes followed by selective dissolution of PANI with HNO₃. Electrochemical quartz crystal microbalance data suggest that the PANI‐H₂PtCl₆ interaction involves redox and coordination reactions, depending on the working potential. The Pt_por shows better electrocatalytic performance than the Pt/PANI and conventionally electrodeposited Pt. The Pt_por modified glassy carbon electrode (GCE) can electrocatalyze the oxidation of H₂O₂ with a sensitivity of 414 µA cm^?2 mM^?1 and a detection limit of 9 nM, and the chitosan‐glucose oxidase/Pt_por/GCE can sense glucose with a sensitivity of 93.4 µA cm^?2 mM^?1.     

Graphene/poly(ortho-phenylenediamine) nanocomposite material for electrochemical supercapacitor

Reduced graphene oxide was synthesized by simple chemical processing of graphite. Electron microscopy investigations of synthesized graphene showed slightly folded transparent sheets with a few square micrometers dimension. Poly(ortho-phenylenediamine)/graphene/Pt electrode was electrochemically fabricated in a 2.0-M H₂SO₄ solution by means of multiple potential cycling. Due to the catalytic effect of graphene on the oxidative electropolymerization of ortho-phenylenediamine, the ortho-phenylenediamine/graphene (PoPD/GR) nanocomposite showed greatly enhanced electrical properties and excellent capacitive behavior. Electrochemical impedance spectroscopy, galvanostatic charge/discharge curves, and voltammetric investigations revealed that PoPD/GR nanocomposite represented good capacitive behavior with a specific capacitance as high as 308.3 F g^?1 at 0.1 A g^?1. It is almost three times higher than that of pure graphene (111.7 F g^?1). In addition, the nanocomposite electrode retained more than 99 % of the initial capacity after 1,500 cycles at a current density of 1 A g^?1.     

Electrochemical Evaluation of Titanium (IV) Oxide/Polyacrylonitrile Electrospun Discharged Battery Coals as Supercapacitor Electrodes

The TiO₂ nanoparticles are electrospun with polyacrylonitrile (PAN) polymer solution onto the discharged battery coal (DBC) electrode and the results are evaluated as a supercapacitor. The morphology and chemical composition of the synthesized TiO₂ nanoparticles and PAN+TiO₂ nanocomposite fibers were characterized by Scanning electron microscopy, thermogravimetry and FTIR analysis. Supercapacitor measurements and electrochemical characterizations of the electrodes examined by cyclic voltammetry and electrochemical impedance spectroscopy. Electrochemical measurements showed that the best current value was obtained from PAN and TiO₂ coated DBC. The performances of both PAN and PAN+TiO₂ coated DBC electrodes were investigated as supercapacitors. PAN+TiO₂/DBC showed the best specific capacitance value of 156.00 F g⁻¹ and PAN/DBC showed 74.93 F g⁻¹. In addition, PAN+TiO₂/DBC exhibited reliable stability performance over 2000.00 cycles.     

Reduced graphene oxide-CoFe2O4 composites for supercapacitor electrode

Reduced graphene oxide-CoFe₂O₄ (RGO-CoFe₂O₄) composite for supercapacitor electrodes has been investigated. On the basis of the morphological and structural characterization of the sample by scanning electron microscopy, X-ray diffraction and Fourier transform infrared spectrometer, the electrochemical performances of the sample were investigated by cyclic voltammetry and chronopotentiometry in 0.50 mol L^?1 Na₂SO₄ aqueous electrolyte. It was shown that the specific capacitance (123.2 F g^?1) of RGO-CoFe₂O₄ composite was highly improved compared with that of RGO (89.9 F g^?1), GO-CoFe₂O₄ (21.1 F g^?1) and CoFe₂O₄ (18.7 F g^?1) at the current density of 5 mA cm^?2. The capacitance retention of about 78.1% for RGO-CoFe₂O₄ after 1000 cycles indicated that it has high cycle stability.     

Synthesis of poly(phenylacetylene)s containing trifluoromethyl groups for gas permeable membrane

Poly(phenylacetylene)s containing trifluoromethyl groups on their benzene rings were synthesized, and gas permeation behaviors of their films were examined. Permeability coefficients for O₂ and N₂, diffusion selectivity (D_o2/D_N2) and solubility selectivity (SO₂/SN₂) were estimated. The gas permeability of polymer films were found to be enhanced remarkably with introduction of trifluoromethyl groups into the polymers: poly[2,4,5-tris(trifluoromethyl)phenylacetylene], Po₂ = 7.8 × 10^?8 [cm³ (STP) cm cm^?2 s^?1 cm Hg^?1], Po₂/PN₂ = 2.1. The relationship between the polymer structures and their gas permeability was discussed.