Trimethylsilyl-substituted diazoalkanes : I. Trimethylsilyldiazomethane

Trimethylsilyldiazomethane was prepared by the action of aqueous KOH on nitroso-N-(trimethylsilylmethyl)urea. The spectroscopic properties of this stable, greenish-yellow liquid which can be isolated by gas chromatography are discussed. Its reaction with acetic acid gives the expected CH₃CO₂CH₂SiMe₃ in addition to SiC cleavage products, CH₃CO₂CH₃ and CH₃CO₂SiMe₃. Products of the 1,3-dipolar addition of Me₃SiCHN₂ to activated olefins were not very stable, and only the adduct with acrylonitrile was isolated as a pure material Trimethylsilyldiazomethane undergoes Me₃SiCH transfer to olefins, giving trimethylsilyl-substituted cyclopropanes, in the presence of CuCI in benzene, but other products are formed as well. Thus such a reaction with cyciohexenegave anti-7-trimethylsilylnorcarane (65%), syn-7-trimethylsilylnorcarane (7%), cis- and trans-l,2-bis(trimethylsilyl)ethylene (9% and 13%, respectively), and an unidentified Me₃SiCH trimer (2.3%).     

Dual-wavelength spectrophotometry: Part III. Determination of arsenazo I in arsenazo III

A simple rapid spectrophotometric method for the determination of arsenazo I in the presence of large amounts or arsenazo III by means or a dual-wavelength method is discussed. By proper selection of the combination of two wavelengths, γ1 = 502.0 nm and γ2 = 575.3 nm, arsenazo III can be masked instrumentally even when its concentration varies. By this method about 0.5– 40%of arsenazo I in arscnazo III can be determined very easily and accurately.     

Thermodynamic study of sodium-iron oxides: Part I. mass spectrometric study of Na-Fe oxides

Vaporization behavior of Na₄FeO₃(s) was thermodynamically studied from 590 to 717 K by means of high temperature mass spectrometry. It was found that Na₄FeO₃(s) decomposed into Na₃FeO₃(s) and released sodium vapor. The temperature dependence of partial vapor pressure of sodium over Na₄FeO₃(s) was measured so that the Gibbs energy of formation of Na₃FeO₃(s) was evaluated as Δ_fG°(Na₃FeO₃)=−1168629+338.34×T.     

Determination of stability constants of chelate complexes: Part II. Applications

The proposed simplified method for calculating the stability constants of chelate complexes from pH and pM measurements (Part I) is applied to two systems. On the basis of data reported by Österberg, the stability constants of copper o-phosphorylserylglutamic acid are calculated and good agreement is achieved. In addition, the stability constants of the mononuclear, binuclear and trinuclear silver complexes of TTHA (triethylenetetraminehexaacetic acid) were calculated from potentiometric pAg data. These calculations yielded the following values of the cumulative constants: log β_AgL=8.7, log β_AgHL= 17.6, log β_AgH2L= 23.8, log β_Ag2L= 14.0, log β_Ag2HL = 20.5, log β_Ag2H2L = 25.6, log β_Ag2L =17.0.     

Nitroxydes—XLVII: Nitroxydes isoquinuclidiniques

5 and 7 substituted 1,3,3-trimethyl isoquinuclidines are prepared by the action of ammonia on piperitenone and 4-methyl piperitenone. Reduction of 1,3,3-trimethyl 5-isoquinuclidone, and the different alcohols obtained are described. The nitroxydes obtained by oxidation of these amines exhibit long range couplings.     

Determination of stability constants of chelate complexes: Part I. Theory

A method for the calculation of the stability constants of chelate complexes from pH and pM values is presented. The method, which is based on a consistent use of side-reaction coefficients, is applicable also to systems containing a large number of complexes. The values of the constants are obtained graphically in a simple way, but in many cases corrections are necessary. Methods of correction are described.     

Determination of competitive adsorption isotherms applying the nonlinear frequency response method: Part I. Theoretical analysis

In this work adsorption equilibria of binary mixtures are quantified analyzing the nonlinear frequency response of a chromatographic column. Local partial derivatives of an isotherm model can be estimated for certain steady-states from the low frequency asymptotes of the corresponding frequency response functions (FRFs). The required FRFs correspond to two different compounds and the type of the imposed inlet concentration changes, e.g. periodical inlet concentration changes of only one compound or of both of them. For an accurate determination of isotherm parameters, it is necessary to approach as close as possible the low frequency asymptotic behaviour of these functions. Based on principles valid for the FRFs corresponding to the adsorption of a single solute, frequencies needed to reach the low frequency asymptotes of the functions of interest for estimating competitive isotherms are defined in this paper. The relation between the accuracy of the isotherm parameters determined and numbers and types of periodical inlet concentration changes and steady-states analyzed is also evaluated.     

Chemistry of leucomycin-X: Conformational studies on leucomycin

The conformation of leucomycin, a macrolide antibiotic with a 16-membered ring lactone, was examined in solution by IR, NMR and CD spectral analysis. The IR reveals that the five hydroxyls are all involved in intramolecular H-bonding. The NMR of the 16-membered ring lactone forming the aglycone shows that the acetyl-carbonyl at C-3, the allylic proton at C-11 and the aldehyde proton are in close proximity on the lactone ring. CD studies suggest that the conformation of the 16-membered ring lactone, especially around the lactone, is mobile and solvent dependent.     

Steric effects in conjugated systems: II. 2,3-Dimethylbutadiene

Based on earlier results of conformational analysis by the Wiberg method¹ of monosubstituted methylbutadienes, analogous calculations for 2,3-dimethylbutadiene have been carried out. Contrary to the opinion of Aten et al.² who assumed almost free rotation, the molecule was shown to exhibit a considerable strain which hinders the rotation of methyl groups and lengthens the C_sp²-C_sp² bond compared with the length of the central bond in butadiene. The calculated lengthening agrees qualitatively with that obtained by electron diffraction¹.     

Metal carbonyl-trifluorophosphine systems : X. Mono-and triruthenium carbonyls

Triruthenium dodecacarbonyl reacts with high pressure PF₃ or with PF₃/CO mixtures to yield two series of compounds. At high PF₃ pressures, the mononuclear species Ru(PF₃)_x(CO)_5−x (x = 5, 4 and 3) are the main products with only traces of Ru(PF₃)₂(CO)₃ and Ru(PF₃)(CO)₄ being found. With high carbon monoxide pressure and less PF₃, the species Ru₃(PF₃)_y(CO)_12−y (y = 0–6) are the main products. It is seen that Ru₃(CO)₁₂ can have up to six CO groups replaced sequentially before the cluster is broken followed by the formation of the mononuclear species. The evidence shows that the Ru(PF₃)_x(CO)_5−x species are stereochemically non-rigid.     

Etudes photochimiques—XIV : Photoreactions des methylisothiazoles

Photorearrangement of methylisothiazoles proceeds via a zwitterion and the amount of rearranged products increases with solvent polarity. When irradiated in the presence of primary amines, 3-methylisothiazole which is the less isomerised, and 5 methylisothiazole give charge transfer complexes. The amine cation radical is hydrolysed to an aldehyde. 4-Methyl isothiazole does not lead to a charge transfer complex.     

Sorbent-based sampling methods for volatile and semi-volatile organic compounds in air: Part 1: Sorbent-based air monitoring options

Sorbent tubes/traps are widely used in combination with gas chromatographic (GC) analytical methods to monitor the vapour-phase fraction of organic compounds in air. Target compounds range in volatility from acetylene and freons to phthalates and PCBs and include apolar, polar and reactive species. Airborne vapour concentrations will vary depending on the nature of the location, nearby pollution sources, weather conditions, etc. Levels can range from low percent concentrations in stack and vent emissions to low part per trillion (ppt) levels in ultra-clean outdoor locations. Hundreds, even thousands of different compounds may be present in any given atmosphere. GC is commonly used in combination with mass spectrometry (MS) detection especially for environmental monitoring or for screening uncharacterised workplace atmospheres. Given the complexity and variability of organic vapours in air, no one sampling approach suits every monitoring scenario. A variety of different sampling strategies and sorbent media have been developed to address specific applications. Key sorbent-based examples include: active (pumped) sampling onto tubes packed with one or more sorbents held at ambient temperature; diffusive (passive) sampling onto sorbent tubes/cartridges; on-line sampling of air/gas streams into cooled sorbent traps; and transfer of air samples from containers (canisters, Tedlar^® bags, etc.) into cooled sorbent focusing traps. Whichever sampling approach is selected, subsequent analysis almost always involves either solvent extraction or thermal desorption (TD) prior to GC(/MS) analysis. The overall performance of the air monitoring method will depend heavily on appropriate selection of key sampling and analytical parameters. This comprehensive review of air monitoring using sorbent tubes/traps is divided into 2 parts. (1) Sorbent-based air sampling option. (2) Sorbent selection and other aspects of optimizing sorbent-based air monitoring methods. The paper presents current state-of-the-art and recent developments in relevant areas such as sorbent research, sampler design, enhanced approaches to analytical quality assurance and on-tube derivatisation.     

Tellurium in organic chemistry—I : A novel synthesis of biaryls

Treatment of bis(aryl)tellurium dichlorides or diaryl tellurides with degassed Raney nickel readily affords the corresponding biaryls. The bis(aryl)tellurium dichlorides were prepared from TeCl₄ and the appropriate aromatics, with or without a Lewis acid as a catalyst, depending on the reactivity of the aromatic. The diaryl tellurides were prepared by reduction of the dichlorides with hydrazine. Attempts to prepare unsymmetrical dichlorides frequently resulted in exchange reactions (RTeCl₃ + R′H → R′TeCl₃ + RH).