The use of reference materials in the fossil fuels quality control

The determination of trace elements in fossil fuels is of primary importance to achieve correct evaluation of environmental impact of power plants. The characterization of coals and fuel oils can be carried out by several analytical techniques such as ICP-MS, FI-HG-AAS, ETA-AAS, ICP-AES and XRF. The accuracy of the analysis, done to routine basis, can be systematically checked by means of the reference materials available or comparing the results obtained by different techniques. Quality control activities in the field of trace element determination in fossil fuels (coal and fuel oil) are described. The determination of As, Hg and Se in coals was carried out by different techniques (NAA, FI-HG-AAS and FI-ICP-MS) together with the determination of several trace metals in residual fuel oils by NAA, ETA-AAS and ICP-MS. The use of certified reference materials in order to check the accuracy of procedures is discussed and the results obtained for NIST 1632a and NIST 1632b (coal samples) and NIST 1634b and NIST 1619 (fuel oil samples) are reported.     

Sample preparation methods for subsequent determination of metals and non-metals in crude oil—A review

In this review sample preparation strategies used for crude oil digestion in last ten years are discussed focusing on further metals and non-metals determination. One of the main challenges of proposed methods has been to overcome the difficulty to bring crude oil samples into solution, which should be compatible with analytical techniques used for element determination. On this aspect, this review summarizes the sample preparation methods for metals and non metals determination in crude oil including those based on wet digestion, combustion, emulsification, extraction, sample dilution with organic solvents, among others. Conventional methods related to wet digestion with concentrated acids or combustion are also covered, with special emphasis to closed systems. Trends in sample digestion, such as microwave-assisted digestion using diluted acids combined with high-efficiency decomposition systems are discussed. On the other hand, strategies based on sample dilution in organic solvents and procedures recommended for speciation analysis are reported as well as the use of direct analysis in view of the recent importance for crude oil field. A compilation concerning sample preparation for crude oil provided by official methods as well as certified reference materials available for accuracy evaluation is also presented and discussed.     

Analytical approaches for arsenic determination in air: A critical review

This review describes the different steps involved in the determination of arsenic in air, considering the particulate matter (PM) and the gaseous phase. The review focuses on sampling, sample preparation and instrumental analytical techniques for both total arsenic determination and speciation analysis. The origin, concentration and legislation concerning arsenic in ambient air are also considered. The review intends to describe the procedures for sample collection of total suspended particles (TSP) or particles with a certain diameter expressed in microns (e.g. PM10 and PM2.5), or the collection of the gaseous phase containing gaseous arsenic species. Sample digestion of the collecting media for PM is described, indicating proposed and established procedures that use acids or mixtures of acids aided with different heating procedures. The detection techniques are summarized and compared (ICP-MS, ICP-OES and ET-AAS), as well those techniques capable of direct analysis of the solid sample (PIXE, INAA and XRF). The studies about speciation in PM are also discussed, considering the initial works that employed a cold trap in combination with atomic spectroscopy detectors, or the more recent studies based on chromatography (GC or HPLC) combined with atomic or mass detectors (AFS, ICP-MS and MS). Further trends and challenges about determination of As in air are also addressed.     

Applications of inductively coupled plasma mass spectrometry and laser ablation inductively coupled plasma mass spectrometry in materials science

Inductively coupled plasma mass spectrometry (ICP-MS) and laser ablation ICP-MS (LA-ICP-MS) have been applied as the most important inorganic mass spectrometric techniques having multielemental capability for the characterization of solid samples in materials science. ICP-MS is used for the sensitive determination of trace and ultratrace elements in digested solutions of solid samples or of process chemicals (ultrapure water, acids and organic solutions) for the semiconductor industry with detection limits down to sub-picogram per liter levels. Whereas ICP-MS on solid samples (e.g. high-purity ceramics) sometimes requires time-consuming sample preparation for its application in materials science, and the risk of contamination is a serious drawback, a fast, direct determination of trace elements in solid materials without any sample preparation by LA-ICP-MS is possible. The detection limits for the direct analysis of solid samples by LA-ICP-MS have been determined for many elements down to the nanogram per gram range. A deterioration of detection limits was observed for elements where interferences with polyatomic ions occur. The inherent interference problem can often be solved by applying a double-focusing sector field mass spectrometer at higher mass resolution or by collision-induced reactions of polyatomic ions with a collision gas using an ICP-MS fitted with collision cell. The main problem of LA-ICP-MS is quantification if no suitable standard reference materials with a similar matrix composition are available. The calibration problem in LA-ICP-MS can be solved using on-line solution-based calibration, and different procedures, such as external calibration and standard addition, have been discussed with respect to their application in materials science. The application of isotope dilution in solution-based calibration for trace metal determination in small amounts of noble metals has been developed as a new calibration strategy. This review discusses new analytical developments and possible applications of ICP-MS and LA-ICP-MS for the quantitative determination of trace elements and in surface analysis for materials science.     

Uranium determination using atomic spectrometric techniques: An overview

This review focuses on the determination of uranium using spectroanalytical techniques that are aimed at total determination such as flame atomic absorption spectrometry (FAAS), electrothermal atomic absorption spectrometry (ETAAS), inductively coupled plasma optical emission spectrometry (ICP-OES); and inductively coupled plasma mass spectrometry (ICP-MS) that also enables the determination of uranium isotopes. The advantages and shortcomings related to interferences, precision, accuracy, sample type and equipment employed in the analysis are taken into account, as well as the complexity and costs (i.e., acquisition, operation and maintenance) associated with each of the techniques. Strategies to improve their performance that employ separation and/or preconcentration steps are considered, with an emphasis given to solid-phase extraction because of its advantages compared to other preconcentration procedures.     

Trace element determinations in shale oil products by neutron activation

Neutron activation offers some important advantages for the determination of selected trace elements in shale oil products. This paper gives techniques and results of a study of crude shale oil and naphtha, heavy distillate, and wax products of shale oil. The elements determined were Al, As, Au, Br, Ce, Cl, Co, Cr, Fe, Hg, I, K, Mn. Mo, Na, S, Sb, Se, V, and Zn. Some elements (Mn, Na, As) tend to accumulate in heavier fractions, whereas chlorine and iodine are concentrated in the more volatile fractions. The volatility of sulphur compounds in the shale oil products appears to be essentially uniform, with some tendency toward accumulation in distillation residues. The tendency for the trace elements to accumulate in the waxes that precipitated from cooled heavy distillates was very low.     

原油非烃化合物结构与含量的馏分分离及联用色谱信息获取通用方法

用正己烷将沥青质从油样中分离,再根据类组分之间极性差别,用中性氧化铝-硅胶双层析柱将原油样其余部分分成脂肪烃、芳香烃和7个非烃馏分。各馏分回收完全。用色-质联用技术,将非烃馏分再分离并获取实验数据,为原油非烃结构和含量测定奠定有关的信息基础。不同油井样品研究和重复实验表明,方法对各种原油非烃化合物分离和信息测定有很好的重现性。     

Trends in sorption preconcentration combined with noble metal determination.

Nowadays much attention is being paid to the determination of trace amounts of noble metals in geological, industrial, biological and environmental samples. The most promising techniques, such as inductively coupled plasma atomic emission spectrometry (ICP-AES), inductively coupled plasma mass spectrometry (ICP-MS) and electrothermal atomic absorption spectrometry (ETAAS) are characterized by high sensitivity. However, the accurate determination of trace noble metals has been limited by numerous interferences generated from the presence of matrix elements. To decrease, or eliminate, these interferences, the sorption preconcentration of noble metals is often used prior to their instrumental detection. A great number of hyphenated methods of noble metal determination using sorption preconcentration have been developed. This review describes the basic types of available sorbents, preconcentration procedures and preparations of the sorbent to the subsequent determination of noble metals. The specific features of instrumental techniques and examples of ETAAS, FAAS, ICP-AES, ICP-MS determinations after the sorption preconcentration of noble metals are considered. The references cited here were selected mostly from the period 1996 - 2006.     

Optimisation of plasma techniques for trace analysis of refractory metals

Besides atomic absorption spectrometry, the plasma techniques can be seen as state-of-the-art instrumentation in an industrial laboratory for the analysis of trace elements today. For the analysis of refractory metals, e.g. Mo and W, the determination limits which can be reached by ICP-AES techniques are mainly restricted by the spectral background of the matrix. Advantages and disadvantages of sequential and simultaneous detection as well as different methods of evaluation, such as Kaiman filtering and multiple component spectral fitting, are discussed. The results are compared with trace matrix separation techniques and on-line coupling of ion chromatography with ICP-AES and ICP-MS. Furthermore, the limitations of all techniques with respect to their applicability for routine analysis, especially the complexity of sample preparation, degree of automation, time consumption and cost are shown. With respect to the detection capability, TMS with ICP-MS end determination is the most powerful technique, but for routine analysis simultaneous multielement determination from the matrix is favourable.     

Trace element determination in crude oil and its fractions by inductively coupled plasma mass spectrometry using ultrasonic nebulization of toluene solutions

A method was developed for the determination of trace elements in crude oil by inductively coupled plasma mass spectrometry (ICP-MS) after sample dissolution in toluene and subsequent ultrasonic nebulization (USN). Carbon build-up at the interface and ion lenses was minimized by optimization of the argon to oxygen ratio in the plasma and by the desolvating action of the USN. The analyte addition technique, combined with internal standardization (¹¹⁵In), was the only calibration procedure capable to correct properly for signal suppression, especially observed in solutions with higher concentrations of asphaltenes. Analytical curves with good linearity (r²>0.99), and solution detection limits (LOD–3σ) of 0.1 μg l⁻¹ for V, Ni, Co, Y, Mo, Cd, Ba and La, and in the range of 0.1–1 μg l⁻¹ for Al, Ti, Fe, Zn, Sr, Ag, Sn and Pb were obtained. Method validation was performed by analyzing two certified reference materials. For National Institute for Standards and Technology (NIST) 1634c (V, Ni, Co), accuracy was approximately 10%, similar as observed for other 12 elements in NIST 1084a. Asphaltenes were separated from the oil bulk of crude oil samples from the Potiguar Basin (Brazil) using precipitation in heptane. The heptane-soluble fraction (maltenes) was separated by elution chromatography into three sub-fractions: (1) saturated and low molecular mass (MM) aromatics, (2) aromatics and low MM polar compounds, and (3) high MM polar compounds (resins). Trace elements were determined in these fractions after dissolution in toluene, by USN–ICP-MS. Mass balance calculations showed a significant increase of most elements (10–30 times) in the asphaltenic fraction, and in minor proportions in fraction 3, compared to the crude oil samples. Comparison with microwave-assisted acid decomposition showed good agreement, validating the proposed methodology and emphasizing its applicability for routine analysis of crude oil and other toluene soluble petroleum products.     

Applications of laser ablation and electrothermal vaporization as sample introduction techniques for ICP-MS

The field of applications of ICP-MS can be further increased by the use of special sample introduction techniques such as laser ablation (LA) and electrothermal vaporization (ETV). In both cases a tandem source for mass spectrometry is formed by the sample introduction device and the ICP. The first source is specifically designed for the volatilization of a sample and it can be used to introduce selectively only certain parts of a sample into the ICP-MS, based either on local distribution (LA) or volatility (ETV). Applications of LA-ICP-MS are the determination of distribution patterns of minor constituents in solid samples such as ceramics, alloys or hard biological structures. Homogeneity testing in the first two types of samples or determination of distribution patterns of trace elements in the latter can be carried out rapidly with high spatial resolution on a multielement basis. The possibility of on-line separation between fractions of different volatility in a sample with ETV-ICP-MS is demonstrated for volcanic eruption products and other samples.     

Determination of trace elements in petroleum products by inductively coupled plasma techniques: A critical review

The fundamentals, applications and latter developments of petroleum products analysis through inductively coupled plasma optical emission spectrometry (ICP-OES) and mass spectrometry (ICP-MS) are revisited in the present bibliographic survey. Sample preparation procedures for the direct analysis of fuels by using liquid sample introduction systems are critically reviewed and compared. The most employed methods are sample dilution, emulsion or micro-emulsion preparation and sample decomposition. The first one is the most widely employed due to its simplicity. Once the sample has been prepared, an organic matrix is usually present. The performance of the sample introduction system (i.e., nebulizer and spray chamber) depends strongly upon the nature and properties of the solution finally obtained. Many different devices have been assayed and the obtained results are shown. Additionally, samples can be introduced into the plasma by using an electrothermal vaporization (ETV) device or a laser ablation system (LA). The recent results published in the literature showing the feasibility, advantages and drawbacks of latter alternatives are also described. Therefore, the main goal of the review is the discussion of the different approaches developed for the analysis of crude oil and its derivates by inductively coupled plasma (ICP) techniques.     

High performance liquid chromatography hyphenated to inductively coupled plasma mass spectrometry for V and Ni quantification as tetrapyrroles

A method was developed for the determination of V and Ni as tetrapyrroles by High Performance Liquid Chromatography hyphenated to Inductively Coupled Plasma Mass Spectrometry (HPLC-ICP-MS) using reversed phase and elution gradient. Chlorinated solvents and tetrahydrofuran were investigated as regard to separation time and ICP-MS detection efficiencies. The final elution gradient program started from pure methanol to a mixture of 20:80 (v/v) chloroform:methanol. External quantification of V and Ni with inorganic standards by flow injection ICP-MS, used online with HPLC, resulted in 95% of recoveries. The Limits of Detection for V during methanol elution and for Ni during the 20% chloroform gradient elution were evaluated by their minimum detectable concentrations, which were, respectively, 5 μg L^− 1 and 8 μg L^− 1. The methodology was applied to polar and resin fractions separated from a Brazilian crude oil and a sediment extract from an oil-polluted area in the Guanabara Bay, Rio de Janeiro, Brazil. Vanadium as tetrapyrroles represented the totality of V content in the polar fraction, whereas Ni was in different polar forms in the resin and sediment extract.     

The use of nonpolar matrices for matrix-assisted laser desorption/ionization mass spectrometric analysis of high boiling crude oil fractions

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) with nonpolar matrices has been investigated for its applicability to the characterization of atmospheric resid crude oil fractions. The data obtained by use of nonpolar matrices was compared with that from polar matrices as well as from direct LDI-MS and field ionization mass spectrometry. Nonpolar matrices, such as anthracene or 9-cyanoanthracene, yield only a single radical molecular cation upon LDI. Thus, no interfering matrix-related ions are present during the MALDI-TOFMS analysis of the crude oil sample. Nonpolar matrices yield molecular mass distributions from linear mode MALDI-TOFMS that are comparable to distributions found with LDI-MS. An advantage of nonpolar matrices is the increased production of analyte ions, which allows reflectron mode MALDI-TOFMS to be performed. Nonpolar matrices are also shown to be less sensitive to solvent and sample preparation conditions than conventional polar matrices. These results suggest that nonpolar matrices may be favorable alternatives to more traditional polar or acidic matrices commonly used in the MALDI mass spectral characterization of crude oil related samples.     

Characterisation of River Po particles by sedimentation field-flow fractionation coupled to GFAAS and ICP-MS

A procedure for elemental composition determination of water-borne river particles (Po River) on both size-fractionated and unfractionated submicron particles (0.1–1 μm) by graphite furnace atomic absorption spectroscopy (GFAAS) and inductively coupled plasma-mass spectrometry (ICP-MS) is reported. Sample fractionation was performed using sedimentation field-flow fractionation (SdFFF). The distribution of relative mass vs. particle size was determined using UV detection. Fractions were collected over a narrow size range for scanning electron microscopy. With this combination of techniques the mass, elemental composition, and shape distributions can be obtained across the size spectrum of the sample.

The size distributions of the major elements (Al, Fe) were determined by coupling both GFAAS and ICP-MS techniques to the SdFFF. The procedure was validated using a reference clay sample. Satisfactory agreement was found between both the GFAAS and ICP-MS aluminium signal and the UV detector signal. Some discrepancies were observed in the Fe/Al ratios when comparing GFAAS and ICP-MS. Thus further investigation is in order to fully assess the role of SdFFF-ICP-MS and SdFFF-GFAAS techniques for elemental characterisation of aquatic colloids. Both GFAAS and ICP-MS signals unambiguously indicate a significantly higher Fe content in the lower size range, which is consistent with previous investigations.

Trace element levels in unfractionated Po River particles, determined by both GFAAS and ICP-MS, show good agreement. The high levels of Cu, Pb, Cr and Cd found associated with the colloidal particles underlines the significance of the environmental role played by the suspended matter in rivers in both highly industrialised and intensively cultivated areas.     

渣油超临界萃取馏分中硫化物的分离富集研究

采用选择性氧化与色谱结合的方法分离渣油中的硫醚硫化物和噻吩硫化物,该法是基于不同类型硫的选择性氧化、氧化组分与未氧化组分间极性的差异实现的。首先用高碘酸四丁铵在不氧化噻吩硫的情况下将硫醚硫选择性氧化为高极性的亚砜,经色谱柱分离富集后,利用红外色谱和硫元素分析仪,研究了馏分中硫化物的类型分布。结果表明,在俄罗斯渣油中噻吩硫和硫醚硫的质量分数随组分变重均呈增长趋势,噻吩硫相对质量分数(指硫醚硫+噻吩硫)随馏分变重呈下降趋势,相对质量分数在70%以上,噻吩硫是俄罗斯渣油中硫的主要存在形态。     

Antioxidative properties of defatted dabai pulp and peel prepared by solid phase extraction

Solid phase extraction (SPE) using Sep-Pak^? cartridges is one of the techniques used for fractionation of antioxidant compounds in waste of dabai oil extraction (defatted dabai parts). The aim of this study was to determine the phenolic compounds and antioxidant capacity in crude extracts and several SPE fractions from methanolic extract of defatted dabai pulp and peel. Based on SPE, Sep-Pak^? cyanopropyl and C₁₈ cartridges were used to fractionate the antioxidant-rich crude extracts into water and methanolic fractions. Analyzed using LC-MS, flavonoids, anthocyanins, saponin derivatives and other unknown antioxidative compounds were detected in the defatted dabai crude extracts and their SPE fractions. Anthocyanins were the major phenolic compounds identified in the defatted dabai peel and detected in most of the SPE fractions. Methanolic fractions of defatted dabai parts embraced higher total phenolics and antioxidant capacity than water fractions. This finding also revealed the crude extracts of defatted dabai peel have the most significant antioxidant properties compared to the methanolic and water fractions studied. The crude extract of defatted dabai parts remain as the most potent antioxidant as it contains mixture of flavonoids, anthocyanins and other potential antioxidants.     

Microwave-induced combustion of crude oil for further rare earth elements determination by USN–ICP-MS

A procedure for light and heavy crude oils digestion by microwave-induced combustion (MIC) is proposed for the first time for further rare earth elements (REE) determination by inductively coupled plasma mass spectrometry (ICP-MS) equipped with an ultrasonic nebulizer (USN). Samples of crude oil (API density of 10.8–23.5, up to 250 mg) were inserted in polycarbonate capsules and combusted using 20 bar of oxygen and 50 μL of 6 mol L⁻¹ ammonium nitrate as igniter. Nitric acid solutions (1–14.4 mol L⁻¹) were evaluated for analyte absorption and a reflux step was applied after combustion (5 min of microwave irradiation at 1400 W) in order to achieve better analyte recoveries. Accuracy was evaluated using a spiked sample and also by comparison of results obtained by microwave-assisted digestion combined to ultraviolet radiation (MW–UV) and by neutron activation analysis (NAA). Using 3 mol L⁻¹ HNO₃, quantitative recoveries (better than 97%) were obtained for all analytes. Blank values were always negligible. Agreement was higher than 96% for La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu and Y by comparison of results with those obtained by MW–UV and by NAA (only for La, Ce, Nd, Sm, and Yb). Residual carbon content in digests using MIC was always below 1%. As an advantage over conventional procedures for crude oil digestion, using MIC, it was possible to use diluted acid as absorbing solution, obtaining better limits of detection and avoiding interferences in REE determination by USN–ICP-MS.     

A tutorial and mini-review of the ICP-MS technique for determinations of transition metal ion and main group element concentration in the neurodegenerative and brain sciences

Abstract  

New techniques in the biosciences are always welcomed and important. Reviews help in updating and disseminating information in scientific fields, especially when there are many advances such as in the vital area in neuroscience. Herein is a recent review of inductively coupled plasma mass spectrometry (ICP-MS) in the context of trace elements, relating to neurodegenerative diseases. The accurate determination of such elemental distributions in Alzheimer’s disease, Parkinson’s disease, etc. allows for a better understanding of such diseases and relates to the sensitivity and scope of the ICP-MS technique. The elements detected are often “trace” and can be analyzed for both body tissues and fluids. We discuss the practical use of ICP-MS. This includes the explanations of the instrumental setup, elements and their detection limits, a brief comparison of ICP-MS with other inorganic analysis instruments, sample preparation, and the analysis method. Next, we discuss neurodegenerative disease and metal ion analysis with ICP-MS. This includes introductions to neurodegenerative diseases, tissue analysis, fluid analysis, and bioimaging of metals in brain tissue samples, and protein analysis application with metals and ICP-MS, broken down into the subtopics of (1) isotope dilution analysis, (2) related immunoassay techniques, and (3) hyphenated instrumental applications. This article is meant to be a primer for a synthetic chemist interested in utilizing this technique and is current through the middle of 2010.     

Atmospheric pressure laser ionization (APLI) coupled with Fourier transform ion cyclotron resonance mass spectrometry applied to petroleum samples analysis: comparison with electrospray ionization and atmospheric pressure photoionization methods

The analysis of crude oil samples remains a tough challenge due to the complexity of the matrix and the broad range of physical and chemical properties of the various individual compounds present. In this work, atmospheric pressure laser ionization (APLI) is utilized as a complementary tool to other ionization techniques for crude oil analysis. Mass spectra obtained with electrospray ionization (ESI) and atmospheric pressure photoionization (APPI) are compared. APLI is primarily sensitive towards non‐polar aromatic hydrocarbons, which are generally present in high amounts especially in heavy crude oil samples. The ionization mechanisms of APLI vs. APPI are further investigated. The results indicate the advantages of APLI over established methods like ESI and APPI. The application of APLI in combination with Fourier transform ion cyclotron resonance mass spectrometry (FT‐ICR MS) is thus demonstrated to be a powerful tool for the analysis of aromatic species in complex crude oil fractions. Copyright © 2011 John Wiley & Sons, Ltd.