新型环膦腈化合物的合成及性能研究

以六氯环三膦腈(HCCP)为原料合成了六(4-苯基苯氧基)三聚膦腈(HPPCP)和六(4-苯基偶氮苯氧基)三聚膦腈(HPDPCP),运用1HNMR、31P NMR、IR等测试技术对其结构进行了表征。TGA结果表明,两种物质具有良好的热稳定性,HPPCP的最大热分解温度高达455℃,HPDPCP残留率高达62·83%(800℃)。同时紫外光谱研究结果表明,极性溶剂使HPDPCP的紫外吸收波长红移。HPPCP和HPDPCP在阻燃材料方面、HPDPCP在线性或非线性光学以及分子信息存储器件等方面有着潜在的应用前景。     

聚[(四氟丙氧基)2-x(三氟乙氧基)x]膦腈合成和气体分离性能研究

以六氯环三聚磷腈为原料通过真空热开环聚合制得线型聚二氯磷腈(PDCP),再通过对PDCP进行亲核取代合成制备了新的聚膦腈类高分子--聚[(四氟丙氧基)2-x(三氟乙氧基).]膦腈,聚合物经过四氢呋喃-苯反复溶解-沉淀得到纯化产物.通过31P-NMR、1H-NMR和FTIR对其结构进行了表征;DSC法测定其玻璃化转变温度...     

六(甲氧基乙氧基乙氧基)三聚磷腈的合成与表征

以六氯三聚磷腈和甲氧基乙氧基乙醇为主要原料,合成了全取代的六(甲氧基乙氧基乙氧基)三聚磷腈,并用IR、31P NMR、1HNMR、13C NMR、FABMS等现代谱学技术对其结构进行了表征。经生物活性试验证明,此化合物对腐生线虫Panagrellus redivivus具有一定的毒杀活性。     

六(乙氧基吡咯烷酮)三聚磷腈的合成与表征

以N-羟乙基吡咯烷酮与氢化钠作用生成相应的钠盐,再将此钠盐与六氯三聚磷腈(HCCP)发生亲核取代反应,合成了六(乙氧基吡咯烷酮)三聚磷腈,用IR、31P NMR、1H NMR、13C NMR、DEPT、FABMS等现代谱学技术对其结构进行了表征。生物活性试验表明,此化合物1mg/mL时对腐生线虫Panagrellus redivivus的72h致死率为52·7%。     

聚苯氧基膦腈的合成及其电纺纤维的制备

以环状三聚六氯磷腈(HCCP)为原料,采用热开环聚合方法,合成了聚二氯磷腈,再利用亲核取代反应合成了聚苯氧基膦腈(PPPh).采用FT-IR、1H NMR、GPC、DSC、TGA等对所得到的聚合物进行了结构表征和性能测试.通过静电纺丝法制备聚苯氧基膦腈纤维,研究了纺丝液浓度、电场强度、挤出速度等对纤维形态的影响.结果表明,在聚合物溶液浓度为7(wt)%～8(wt)%、挤出速度为0.3～1.0 mL/h、接收距离为20cm、电压为22kV的静电纺丝条件下,可制备纤维直径为300～800 nm的PPPh纤维.     

含咔唑生色团的三聚磷腈分子玻璃的合成

含咔唑生色团的三聚磷腈分子玻璃的合成;三聚磷腈;后重氮偶合;咔唑;光折变分子玻璃     

高热稳定性聚膦腈亚微米球的室温快速合成

以六氯环三膦腈（HCCP）和4,4′-二羟基二苯砜（BPS）为共缩聚单体,乙腈为溶剂,三乙胺为缚酸剂,在室温条件下,采用沉淀聚合的方法快速合成了一种聚膦腈亚微米球。 红外光谱、元素分析及X射线能谱分析(EDX)测试表明,该聚膦腈亚微米球具有高度交联的化学结构;扫描电子显微镜和透射电子显微镜测试表明,该聚膦腈亚微米球粒径分布在410 nm附近,而且具有光滑的表面和实心的结构;热重分析(TGA)测试表明,该聚膦腈亚微米球的热分解温度达到531 ℃。 并推测了该聚膦腈亚微米球的形成机理。     

交联聚膦腈中空微球的可控制备

以分散聚合法制备的聚苯乙烯微球为模板,以六氯环三膦腈、4,4’-二羟基二苯砜为共聚单体,三乙胺为缚酸剂,室温条件下制备出了聚苯乙烯／聚膦腈（核／壳）复合微球,然后用四氢呋喃处理该复合微球,得到聚膦腈中空微球。利用红外光谱、元素分析、扫描电镜及投射电镜对所制备中空微球的结构及形貌进行了表征。结果表明,所制备聚膦腈中空微球...     

生物可降解聚膦腈材料的功能化及研究进展

聚膦腈是一类主链由磷氮原子交替组成,每个磷原子带有两个有机官能团侧基的有机-无机杂化高分子,其化学结构强大的可设计性赋予了材料丰富的理化性能。作为生物学用途的聚膦腈材料,生物相容性、生物可降解性和功能化改性是实现其应用的关键因素。本文从数种功能化聚膦腈(如光致荧光、导电、聚膦腈-聚酯共聚物)的制备、聚膦腈的降解机理和降解行为调控,以及生物可降解聚膦腈作为组织工程支架材料、药物载体材料和基因转染材料等几个方面,较为全面地综述了聚膦腈生物医用高分子的研究进展。     

杂质对六氯环三聚磷腈热聚合的影响

利用红外光谱、磷核磁共振谱、广角X射线衍射、差示扫描量热、凝胶色谱等分析手段,研究了六氯环三聚磷腈(HCCP)在存放过程中产生的杂质,以及不同纯化方法对这些杂质的去除效果,探讨了这些杂质对HCCP单体真空热开环聚合反应的影响.HCCP在存放过程中接触空气中的水汽在环上氯基团处易被水解,产生Trimer-1、Gem-2、Dimmer-3等杂质,重结晶能去除Gem-2、Dimmer-3和少量的Trimer-1,升华能较好地去除Trimer-1.杂质Gem-2、Dimmer-3中的羟基引发聚二氯磷腈交联,生成不可溶的交联态聚二氯磷腈,而Trimer-1则会降低聚合速度,并在聚合物中引入磷氧基和亚胺基杂链,从而影响后续聚磷腈取代产物的性质,表现为聚合物中晶态发生变异,结晶度降低,玻璃化温度、晶态转化温度和熔融温度出现差别.用重结晶结合升华的方法对HCCP单体进行纯化后,应用FTIR或31P-NMR分析来验证纯化效果,以确保能控制聚合速度和时间,使聚合顺利进行.     

Timolol maleate release from pH-sensible poly(2-hydroxyethyl methacrylate-co-methacrylic acid) hydrogels

Multifunctional polymeric materials were obtained from poly(methacrylic acid-co-2-hydroxyethyl methacrylate), to be used as a raw material in the manufacture of contact lens and as drug delivery systems. Poly(methacrylic acid-co-2-hydroxyethyl methacrylate) was prepared by free-radical polymerization in aqueous solution at 60 °C using potassium persulfate (KPS) as initiator and N,N^′-methylenebisacrylamide (BIS) as cross-linker agent. The dynamic and equilibrium swelling properties of dry glassy poly(methacrylic acid-co-2-hydroxyethyl methacrylate) polymeric networks were studied as a function of pH and methacrylic acid (MAA) content. The water content increase as MAA content and pH increase. Timolol maleate delivery from poly(MAA) and poly(2-hydroxyethyl methacrylate) (HEMA) homopolymers was studied and the results show a Fickian diffusion behavior.     

Radiation polymerization of acrolein at low temperatures

Radiation polymerization of acrolein in the presence of the additives such as 2-hydroxyethyl methacrylate, acrylic acid, and water at low temperatures (0–78°C) was studied. The polyacrolein resulting from the polymerization gave a small particlelike microsphere (0.5–5 μm in diameter). The rate of the polymerization reaction of acrolein appeared to be accelerated by the addition of a small amount of 2-hydroxyethyl methacrylate or acrylic acid. The particle size of the polyacrolein particle varied with the condition of the polymerization and increased or decreased with an increase in the addition concentration of 2-hydroxyethyl methacrylate or acrylic acid.     

Analysis and purification of 2-hydroxyethyl methacrylate by means of thin-layer chromatography.

Poly(2-hydroxyethyl methacrylate) is nowadays accepted as a biocompatible, safe and stable hydrogel for medical use. In this paper, the use of thin-layer chromatography for the analysis and small-scale preparation of the initial monomer, 2-hydroxyethyl methacrylate, is described. Development on silica gel, with n-hexane-diethyl ether (1:1, v/v) and/or n-hexane-isobutyl methyl ketone-n-octanol (9:2:1, v/v; saturated with 25% nitric acid) is recommended for qualitative analysis. Preparative-scale work is preferably carried out on sulphuric acid-impregnated silica gel, with n-hexane-diethyl ether (1:1, v/v) as mobile phase. Inhibitors are detected by thin-layer chromatography and a drop-test procedure with diazotised sulphanilic acid. The nature of the contaminants present in several commercial samples of 2-hydroxyethyl methacrylate is discussed. n20D values are reported for the system 2-hydroxyethyl methacrylate-water.     

Das Monte Carlo-studium der verteilung der sequenzen in den copolymeren des methylmethacrylats mit chloropren und des 2-hydroxyäthyl-methacrylats mit alkylacrylaten

Using our Monte Carlo model of binary copolymerization, one studies the sequence distribution in methyl methacrylate/chloroprene and 2-hydroxyethyl methacrylate/alkyl acrylate copolymers. Our study points out incontestably that the copolymerization of methyl methacrylate is explainable through ultimate group effect (Ebdon has stated a penultimate group effect). In the case of 2-hydroxyethyl methacrylate/alkyl acrylate copolymers the agreement between computed and experimental data is satisfactory.     

Polymerisation de monomeres a structures biologiques

Fixation of biological compounds (cholesterol and testosterone) on (2-hydroxyethyl)methacrylate has been realized by a carbonate linkage. These new monomers have been characterized by N.M.R. and i.r.; they have been polymerized by a radical process. Resulting homopolymers have been analysed and compared with polymers bearing similar active compounds, previously synthesized by chemical modification of poly (2-hydroxyethyl)methacrylate.     

SYNTHESIS OF POLY(METHYL METHACRYLATE)-graft-POLYSTYRENE BY ATOM TRANSFER RADICAL POLYMERIZATION

The radical copolymerization of methyl methacrylate and 2-hydroxyethyl methacrylate was carried out via atomtransfer radical polymerization (ATRP) initiated by ethyl 2-bromoisobutyrate and catalyzed by CuBr/2,2'-bipyridinecomplex. This polymerization proceeds in a living fashion with controlled molecular weight and low polydispersity. Theobtained copolymer was esterified with 2-bromoisobutylryl bromide yielding a macroinitiator, poly(methyl methacrylate-co-2-hydroxyethyl methacrylate-co-2-(2-bromoisobutyryloxy)ethyl methacrylate), and its structure was characterized by ~1H-NMR. This macroinitiator was used for ATRP of styrene to synthesize poly(methyl methacrylate)-graft-polystyrene. Themolecular weight of graft copolymer increased with the monomer conversion, and the polydispersity remained relatively low.The individual grafted polystyrene chains were cleaved from the macroinitiator backbone by hydrolysis and the hydrolyzed product was characterized by ~1H-NMR and GPC.     

Electrospinning of the hydrophilic poly (2-hydroxyethyl methacrylate) and its copolymers with 2-ethoxyethyl methacrylate

The goal was to electrospin 2-hydroxyethyl methacrylate — based biocompatible polymers and prepare submicron fibres (nanofibers) for biomedicinal applications. Syntheses of poly(2-hydroxyethyl methacrylate) (HEMA) and its copolymer with 2-ethoxyethyl methacrylate (EOEMA), and their characterization by viscometry and molecular weight are described. Their relation to electrospinning is discussed. Electrospinning of HEMA homopolymer from water-ethanol is successful for molecular weights 6.31 × 10⁵ and 1.80 × 10⁶ g/mol. Electrospinning of HEMA/EOEMA copolymers is feasible from ethanol.      

Structure changes on polymer blends by means of phase growth on microheterophase surface

We have studied the structural changes on poly(2-hydroxyethyl methacrylate) (PHEMA)/polystyrene (PS) blends by means of phase growth of microheterophase pattern on a template surface composed of poly[2-hydroxyethyl methacrylate (HEMA)-g-styrene (S)] graft copolymer (lamellar shape). The PS macromonomer was synthesized by free radical polymerization of S monomer initiated by a functional initiator [2,2'-azobis(2-(2-imidazolin-2-yl)propane: VA-061] in the presence of a degradative chain transfer agent, followed by an end-capping reaction with p-chloromethylstyrene (CMS). Poly(HEMA-g-S) graft copolymers were prepared by free radical copolymerization of these vinylbenzyl-terminated PS macromonomers with HEMA comonomer.     

Persistent interactions between hydroxylated nanoballs and atactic poly(2-hydroxyethyl methacrylate)(PHEMA)

The incorporation of self-assembled nanoparticles, a.k.a. hydroxylated nanoballs, into poly(2-hydroxyethyl methacrylate)(PHEMA) gives rise to a cross-linked network/hydrogel with enhanced interfacial interaction, whereas its inclusion in poly(methyl methacrylate)(PMMA) results in plasticization.     

Graft polymerization of 2-hydroxyethyl methacrylate via ATRP with poly(acrylonitrile-co-p-chloromethyl styrene) as a macroinitiator

Amphiphilic graft copolymers are excellent additives for the development of antifouling membranes by nonsolvent induced phase separation. We report a convenient approach to the synthesis of novel graft copolymers with hydrophobic polyacrylonitrile (PAN) backbones and hydrophilic poly(2-hydroxyethyl methacrylate) (PHEMA) side chains. Atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate was carried out with poly(acrylonitrile-co-p-chloromethyl styrene) (PAN-co-PCMS) as a macroinitiator in the presence of CuCl/2,2’-bipyridine at 50 °C in dimethyl sulfoxide. Kinetics of the graft polymerization was also evaluated. The synthesis of poly(acrylonitrile-co-p-chloromethyl styrene-g-2-hydroxyethyl methacrylate) (PAN-co-(PCMS-g-PHEMA)) can be relatively controlled when CMS (the ATRP sites) unit in the macroinitiator is around 5 mol%. Both the macroinitiators and graft copolymers were characterized by FTIR, NMR and GPC. The surface morphology and wettability of the copolymer films were studied by AFM and water contact angle measurement, respectively. We demonstrate that phase segregation between the PAN-co-PCMS backbones and the PHEMA side chains takes place and the surface hydrophilicity of the graft copolymers increases with the length of the PHEMA side chains. Because these amphiphilic graft copolymers can be synthesized in mass, they will be useful as latent additives for the fabrication of advanced PAN separation membranes.