Preparation and properties of ionically cross‐linked chitosan nanoparticles

Chitosan nanoparticles were fabricated by a method of tripolyphosphate (TPP) cross‐linking. The influence of fabrication conditions on the physical properties and drug loading and release properties was investigated by transmission electron microscopy (TEM), dynamic light scattering (DLS), and UV–vis spectroscopy. The nanoparticles could be prepared only within a zone of appropriate chitosan and TPP concentrations. The particle size and surface zeta potential can be manipulated by variation of the fabrication conditions such as chitosan/TPP ratio and concentration, solution pH and salt addition. TEM observation revealed a core–shell structure for the as‐prepared nanoparticles, but a filled structure for the ciprofloxacin (CH) loaded particles. Results show that the chitosan nanoparticles were rather stable and no cytotoxicity of the chitosan nanoparticles was found in an in vitro cell culture experiment. Loading and release of CH can be modulated by the environmental factors such as solution pH and medium quality. Copyright © 2008 John Wiley & Sons, Ltd.     

Chitosan nanoparticles of 5-fluorouracil for ophthalmic delivery: characterization, in-vitro and in-vivo study

The aim of this investigation was to develop 5-fluorouracil (5-FU) loaded chitosan nanoparticles (CH-DNPs) for ophthalmic delivery. CH-DNPs were fabricated by ionotropic gelation mechanism using chitosan (CH) and a polyanion (TPP). The nanoparticles were smooth and spherical, confirmed by scanning electron microscopy (SEM) and atomic force microscope (AFM). CH/TPP mass ratio and TPP significantly changed the particles size morphology and encapsulation efficiency. The nanoparticles size ranged from approximately 114 to 192 nm and had a positive zeta potential (30±4 mV). The encapsulation efficiency, loading capacity and recovery of DNPs were 8.12-34.32%, 3.14-15.24% and 24.22 to 67% respectively. Physical characterization was done by Fourier transform infrared (FT-IR) and X-ray diffraction (XRD). No interaction was observed in between drug and polymer and crystallinity of drug was not changed in drug loaded nanoparticles. In-vitro release study of DNPs showed diffusion controlled release. Bioavailability study of batch CS9 was studied in rabbit eye and compare to 5-FU solution. 5-FU level was significantly higher in aqueous humor of rabbit eye. Ocular tolerance was studied in the eye of New Zealand rabbits and tested formulation was non-irritant with no sign of inflammation.     

Development of Thiolated Chitosan Nanoparticles Based Mucoadhesive Vaginal Drug Delivery Systems

The aim of the present study was to evaluate the influence of the chitosan chain length on the drug loading and releasing in VFS (vaginal fluid simulant). Thiolated chitosan nanoparticles (TCS-NPs) were prepared using thioglycolic acid and 1-ethyl-3-3-(3-dimethylaminopropyl)carbodimide hydrochloride (EDC) and characterized with FTIR. The degree of thiol substitution was found out by Ellman’s method. TCS-NPs were developed using ionic cross-linking reaction with pentasodiumtripolyphosphate (TPP). Curcumin (CUR) loaded nanoparticles were obtained by encapsulation. DLS and SEM characterized these NPs with diameter between 200 ± 50 nm. Zeta potential of NPs was 11–38 mv. The maximal encapsulation efficiency was 86.26%. The in vitro drug release studies in VFA at pH 4.2 showed a sustained release profile over a period of 3 days.     

pH响应的介孔二氧化硅纳米颗粒的制备及可控释放

选择带负电荷且溶解度和分子结构对pH值非常敏感的聚丙烯酸作为封堵分子, 采用静电吸附的修饰方法, 制备了pH响应的MCM-41型介孔二氧化硅纳米颗粒. 利用高倍透射电子显微镜(TEM)、 X射线衍射(XRD)、 傅里叶变换红外光谱(FTIR)及比表面积分析等手段表征了介孔二氧化硅纳米颗粒的物理化学性质. 以联钌吡啶染料分子作为模式客体分子, 研究了pH调控下的模式客体分子在介孔二氧化硅纳米颗粒中的包裹及释放行为. 结果表明, 该介孔二氧化硅纳米颗粒对pH具有很好的响应性; 在近中性条件下, 带正电的二氧化硅纳米颗粒通过静电吸附作用吸附带负电的聚丙烯酸, 导致介孔封堵, 使包载的染料分子几乎无释放; 客体分子的释放率随着pH值的降低而升高, 当pH≤5时, 染料分子显著释放, pH=1时客体分子的释放率高达98％, 可以实现对包载客体分子的控制释放. 该pH响应的介孔二氧化硅纳米颗粒载体具有制备简便、 价格低廉和包载量大等优点, 有望应用于药物的控制释放.     

离子凝聚法制备负载流感疫苗的壳聚糖微球

采用三聚磷酸钠(TPP)作为离子交联剂, 应用离子凝聚法制备负载流感疫苗的壳聚糖微球. 筛选出壳聚糖起始质量分数为1%. TPP的浓度对壳聚糖微球的制备影响较大, 采用低浓度的TPP(200 μg/mL)制备的微球放置过夜均出现沉淀现象, 高浓度的TPP(800 μg/mL)在制备过程中出现絮状沉淀. 固化比影响微球的释放行为, 固化比为1∶1的微球爆炸式释放率达到90％, 固化比为1∶3的微球6 h后逐步释放, 12 h后释放率达到95％. 固化比为1∶5的微球6 h后没有明显的释放行为. 壳聚糖溶液的pH对微球的制备和释放没有显著的影响. 通过对负载流感疫苗的壳聚糖微球的制备条件和释放行为的研究结果表明, pH=5.6的壳聚糖溶液, 固化比为1∶3, TPP的质量浓度为400 μg/mL是较理想的流感疫苗壳聚糖微球的制备条件.     

Coordination bonding based pH-responsive albumin nanoparticles for anticancer drug delivery

Zn-loaded bovine serum albumin nanoparticles (Zn-BSA nanoparticles) were prepared and used as carriers for pH-responsive anticancer drug delivery. Zinc was introduced into this system to increase the stability of the BSA nanoparticles and to load the anticancer drug based on the coordination bonding formation of Zn-BSA and Zn-drug molecules, respectively. The cleavage of either the "Zn-BSA" or the "Zn-drug" coordination bonding, in response to pH, would result in the release of the drug under designated pH conditions. The nanoparticles were spherical with diameters of 50-60 nm and narrow size distribution. Mitoxantrone (MX) was chosen as the model drug to study the release behavior and the inhibitory efficacy against tumor cells. In vitro release behavior of MX loaded Zn-BSA nanoparticles (MX-Zn-BSA nanoparticles) showed a fine pH-responsiveness. The release amount at pH 5.0 was close to 80%, while the cumulative release amount at pH 7.4 was less than 6% within 24 h. The blank Zn-BSA nanoparticles were of low cytotoxicity, while a high cytotoxic activity of MX-Zn-BSA nanoparticles against MCF-7 cells was demonstrated by in vitro cell assays.     

Modulation of surface charge, particle size and morphological properties of chitosan-TPP nanoparticles intended for gene delivery

This work investigates the polyanion initiated gelation process in fabricating chitosan-TPP (tripolyphosphate) nanoparticles in the size range of 100-250 nm intended to be used as carriers for the delivery of gene or protein macromolecules. It demonstrates that ionic gelation of cationic chitosan molecules offers a flexible and easily controllable process for systematically and predictably manipulating particle size and surface charge which are important properties in determining gene transfection efficacy if the nanoparticles are used as non-viral vectors for gene delivery, or as delivery carriers for protein molecules. Variations in chitosan molecular weight, chitosan concentration, chitosan to TPP weight ratio and solution pH value were examined systematically for their effects on nanoparticle size, intensity of surface charge, and tendency of particle aggregation so as to enable speedy fabrication of chitosan nanoparticles with predetermined properties. The chitosan-TPP nanoparticles exhibited a high positive surface charge across a wide pH range, and the isoelectric point (IEP) of the nanoparticles was found to be at pH 9.0. Detailed imaging analysis of the particle morphology revealed that the nanoparticles possess typical shapes of polyhedrons (e.g., pentagon and hexagon), indicating a similar crystallisation mechanism during the particle formation and growth process. This study demonstrates that systematic design and modulation of the surface charge and particle size of chitosan-TPP nanoparticles can be readily achieved with the right control of critical processing parameters, especially the chitosan to TPP weight ratio.     

Chitosan nanoparticle as protein delivery carrier--systematic examination of fabrication conditions for efficient loading and release

Chitosan nanoparticles fabricated via different preparation protocols have been in recent years widely studied as carriers for therapeutic proteins and genes with varying degree of effectiveness and drawbacks. This work seeks to further explore the polyionic coacervation fabrication process, and associated processing conditions under which protein encapsulation and subsequent release can be systematically and predictably manipulated so as to obtain desired effectiveness. BSA was used as a model protein which was encapsulated by either incorporation or incubation method, using the polyanion tripolyphosphate (TPP) as the coacervation crosslink agent to form chitosan-BSA-TPP nanoparticles. The BSA-loaded chitosan-TPP nanoparticles were characterized for particle size, morphology, zeta potential, BSA encapsulation efficiency, and subsequent release kinetics, which were found predominantly dependent on the factors of chitosan molecular weight, chitosan concentration, BSA loading concentration, and chitosan/TPP mass ratio. The BSA loaded nanoparticles prepared under varying conditions were in the size range of 200-580nm, and exhibit a high positive zeta potential. Detailed sequential time frame TEM imaging of morphological change of the BSA loaded particles showed a swelling and particle degradation process. Initial burst released due to surface protein desorption and diffusion from sublayers did not relate directly to change of particle size and shape, which was eminently apparent only after 6h. It is also notable that later stage particle degradation and disintegration did not yield a substantial follow-on release, as the remaining protein molecules, with adaptable 3-D conformation, could be tightly bound and entangled with the cationic chitosan chains. In general, this study demonstrated that the polyionic coacervation process for fabricating protein loaded chitosan nanoparticles offers simple preparation conditions and a clear processing window for manipulation of physiochemical properties of the nanoparticles (e.g., size and surface charge), which can be conditioned to exert control over protein encapsulation efficiency and subsequent release profile. The weakness of the chitosan nanoparticle system lies typically with difficulties in controlling initial burst effect in releasing large quantities of protein molecules.     

Preparation of chitosan nanoparticles as carrier for immobilized enzyme

This work investigated the preparation of chitosan nanoparticles used as carriers for immobilized enzyme. The morphologic characterization of chitosan nanoparticles was evaluated by scanning electron microscope. The various preparation methods of chitosan nanoparticles were discussed and chosen. The effect of factors such as molecular weight of chitosan, chitosan concentration, TPP concentration, and solution pH on the size of chitosan nanoparticles was studied. Based on these results, response surface methodology was emploved. The results showed that solution pH, TPP concentration, and chitosan concentration significantly affected the size of chitosan nanoparticles. The adequacy of the predictive model equation for predicting the magnitude orders of the size of chitosan nanoparticles was verified effectively by the validation data. Immobilization conditions were investigated as well. The minimum particles size was about 42±5 nm under the optimized conditions. The optimal conditions of immobilization were as follow: one milligram of neutral proteinase was immobilized on chitosan nanoparticles for about 15 min at 40°C. Under the optimized conditions, the enzyme activity yield was 84.3%.     

Chitosan-Linseed mucilage polyelectrolyte complex nanoparticles of Methotrexate: In vitro cytotoxic efficacy and toxicological studies

The goal of this research was to develop, fabricate and analyze polymeric nanoparticles for the administration of methotrexate (MTX). Linseed mucilage and chitosan nanoparticles (NPs) were prepared using a slightly modified polyelectrolyte complex (PEC) method. The size, shape, and encapsulation effectiveness of the resultant nanoparticles were measured. MTX release profiles at gastrointestinal pH (1.2 and 7.4) and tumor pH (5.5) were examined to determine the targeted potential of NPs as pH-responsive nanocarriers. Zeta analysis showed that nanoparticles prepared by PEC have a size range of 192.1 nm to 246 nm, and PDI was 0.3 of the optimized formulation, which showed homogenous nature of prepared nanoparticles formulation. The findings demonstrated that NPs have a low polydispersity index and a positive zeta potential (PDI). The in-vitro release of the drug indicated a pH-dependent, sustained drug release up to 24 h. Blank LSMCSNPs had almost no in-vivo cytotoxicity for 14 days, while optimum MTX loaded NPs had strong antitumor effects on HepG2 and MCF-7 cells as measured by the MTT assay. Cell apoptosis induction was also checked and MCF-7 cells treated with MTX-LSMCSNPs had a significantly greater rate of apoptosis (21.2 %) than those treated with MTX alone (14.14 %). The findings show that LSMCSNPs could be a potential delivery mechanism for methotrexate to cancer cells in a secure, steady, and ideally controlled manner to improve therapeutic outcomes.     

Hydroxypropyl chitosan bearing beta-cyclodextrin cavities: synthesis and slow release of its inclusion complex with a model hydrophobic drug

Hydroxypropyl chitosan-graft-carboxymethyl beta-cyclodextrin (HPCH-g-CM beta-CD) was synthesized by grafting CM beta-CD onto HPCH using water soluble 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) as the condensing agent. Due to the presence of hydrophobic beta-CD rings onto the HPCH backbone, this polymer can be used as a matrix for controlled drug release. The adsorption of a hydrophobic model drug, ketoprofen, by HPCH-g-CM beta-CD microparticles (using tripolyphosphate as an ionic crosslinking agent) fitted well in the Langmuir isotherm equation. The drug dissolution profile showed that HPCH-g-CM beta-CD microparticles provided a slower release of the entrapped ketoprofen than chitosan, and the release behavior was influenced by the pH value of the medium. These results suggest that beta-CD grafted with chitosan derivatives may become a potential biodegradable delivery system to control the release of hydrophobic drugs with pH-responsive capability.     

Effects of ionic strength on the size and compactness of chitosan nanoparticles

In this work, chitosan nanoparticles were prepared by ionotropic gelation of chitosan with tripolyphosphate (TPP). The effects of the ionic strength of the solvent employed in the particle preparation on the average size and compactness of the particles were investigated. In addition, the effects of the chitosan concentration and the crosslinker to polymer ratio on the particle characteristics were studied. The chitosan–TPP nanoparticles were characterized by dynamic light scattering, zeta potential, and turbidity measurements. The compactness of the nanoparticles was estimated with a method based on the size of the nanoparticles and the turbidity of the nanoparticle suspension. All the investigated preparation parameters, i.e., the ionic strength of the solvent, the chitosan concentration, and the TPP to chitosan ratio, affected the particle characteristics. For instance, smaller and more compact particles were formed in saline solvents, compared to particles formed in pure water. Further, the addition of monovalent salt rendered it possible to prepare particles in the nanometer size range at a higher polymer concentration. Solvent salinity is thus an important parameter to address in the preparation of chitosan nanoparticles crosslinked with TPP.     

Formulation of Quaternized Aminated Chitosan Nanoparticles for Efficient Encapsulation and Slow Release of Curcumin

An effective drug nanocarrier was developed on the basis of a quaternized aminated chitosan (Q-AmCs) derivative for the efficient encapsulation and slow release of the curcumin (Cur)-drug. A simple ionic gelation method was conducted to formulate Q-AmCs nanoparticles (NPs), using different ratios of sodium tripolyphosphate (TPP) as an ionic crosslinker. Various characterization tools were employed to investigate the structure, surface morphology, and thermal properties of the formulated nanoparticles. The formulated Q-AmCs NPs displayed a smaller particle size of 162 ± 9.10 nm, and higher surface positive charges, with a maximum potential of +48.3 mV, compared to native aminated chitosan (AmCs) NPs (231 ± 7.14 nm, +32.8 mV). The Cur-drug encapsulation efficiency was greatly improved and reached a maximum value of 94.4 ± 0.91%, compared to 75.0 ± 1.13% for AmCs NPs. Moreover, the in vitro Cur-release profile was investigated under the conditions of simulated gastric fluid [SGF; pH 1.2] and simulated colon fluid [SCF; pH 7.4]. For Q-AmCs NPs, the Cur-release rate was meaningfully decreased, and recorded a cumulative release value of 54.0% at pH 7.4, compared to 73.0% for AmCs NPs. The formulated nanoparticles exhibited acceptable biocompatibility and biodegradability. These findings emphasize that Q-AmCs NPs have an outstanding potential for the delivery and slow release of anticancer drugs.     

Preparation of chitosan microspheres by ionotropic gelation under a high voltage electrostatic field for protein delivery

Biodegradable microspheres have been widely used in drug/protein delivery system. In this paper, a modified ionotropic gelation method combined with a high voltage electrostatic field was developed to prepare protein-loaded chitosan microspheres. Bovine serum albumin (BSA) was chosen as a model protein. The preparation process and major parameters were discussed and optimized. The morphology, particle size, encapsulation efficiency and in vitro release behavior of the prepared microspheres were investigated. The results revealed that the microspheres exhibited good sphericity and dispersity when the mixture of sodium tripolyphosphate (TPP) and ethanol was applied as coagulation solution. Higher encapsulation efficiency (>90%) was achieved for the weight ratio of BSA to chitosan below 5%. 35% of BSA was released from the microspheres cured in 3% coagulation solution, and more than 50% of BSA was released from the microspheres cured in 1% coagulation solution at pH 8.8. However, only 15% of BSA was released from the microspheres cured in 1% coagulation solution at pH 4. The results suggested that ionotropic gelation method combined with a high voltage electrostatic field will be an effective method for fabricating chitosan microspheres for sustained delivery of protein.     

Preparation and release profiles of pH/temperature-responsive carboxymethyl chitosan/P(2-(dimethylamino) ethyl methacrylate) semi-IPN amphoteric hydrogel

Thermo- and pH-responsive semi-IPN polyampholyte hydrogels were prepared by using carboxymethyl chitosan and P(2-(dimethylamino) ethyl methacrylate) with N N'-Methylenebisacrylamide (BIS) as crosslinking agent. It was found that the semi-IPN hydrogel shrunk most at the isoelectric point (IEP) and swelled when pH deviated from the IEP. Its swelling ratio dramatically decreased between 30 and 50 °C at pH 6.8 buffer solution. It also showed good reversibility. The UV results showed that when the pH values of drug release medium were 3.7, 6.8, and 9 at 25 °C, the cumulative release rates reached 83.1, 51.5, and 72.2%, respectively. The release rate of coenzyme A (CoA) was higher at 50 °C than 37 and 25 °C at pH 6.8 solution. The release rate decreased with increasing the content of carboxymethyl chitosan at 25 °C in pH 6.8 solution. The results showed that semi-IPN hydrogel seems to be of great promise in pH/temperature drug delivery systems.     

Tripolyphosphate-responsive release property of monoolein cubic phase containing sodium dodecyl sulfate and oligo chitosan

Tripolyphosphate (TPP)-responsive MO cubic phase was prepared by immobilizing oligo chitosan in the water channel through its electrostatic attraction with sodium dodecyl sulfate (SDS). The phase transition temperature (PTT) increased with increasing the content of SDS. The PTT of cubic phase whose SDS content was 0%, 0.21%, 0.42%, 0.84%, and 1.68%, determined by polarized microscopy, was about 69.5°C, 72°C, 75°C, 80.5°C, and 95°C, respectively. The PTT did not markedly deviate from that determined by differential scanning calorimetry. The release degree for 72 h of dye (i.e., amaranth and methylene blue) was dependent on the pH value of release medium (pH 3.0 and pH 7.0). Moreover, the release degree significantly increased when the TPP concentration in the release medium increased to 0.4% (w/v). Oligo chitosan was electrostatically complexed with TPP and the complexation took place extensively at the oligo chitosan/TTP mass ratio of 1:0.125 and 1:0.25 and at the oligo chitosan concentration of 1.6% (w/v), evidenced by optical spectroscopy and scanning electron microscopy. It was thought that the complexation was responsible for the TPP concentration-dependent release.     

壳聚糖/乙酰半胱氨酸纳米粒子的性质及体外释药性

制备了一种基于壳聚糖/乙酰半胱氨酸偶合物(CS-NAC)的新型巯基纳米粒子并进行了结构表征, 同时对纳米粒子的黏附性、溶胀性和药物释放进行了测试. 结果表明, 纳米粒子具有较小的粒径(140~210 nm)和正的表面电位(19.5~31.7 mV), 胰岛素的载药量达到13%~42%. 这些性质随着巯基含量的变化而变化. 与壳聚糖纳米粒子相比, 巯基壳聚糖纳米粒子表现出了更强更快的黏附性质. 体外释放研究结果表明, 巯基壳聚糖纳米粒子的胰岛素释放具有pH响应性. 在pH=6.8时, 15 min即能释放58.6 %的胰岛素; 而在pH=5.4时, 24 h内仅有不到40%的胰岛素被释放. 因此, CS-NAC纳米粒子用于胰岛素的黏膜给药体系具有很好的应用前景.     

Synthesis and characterization of folic acid‐modified carboxymethyl chitosan‐ursolic acid targeted nano‐drug carrier for the delivery of ursolic acid and 10‐hydroxycamptothecin

Carboxymethyl chitosan (CMCS), as a water‐soluble, biocompatible, and biodegradable polymer, is an excellent carrier for a sustained drug delivery system. In this study, a amphiphilic carboxymethyl chitosan‐ursolic acid nano‐drug carrier modified by folic acid (FPCU) were prepared, and then the nano‐drug carrier wrapped another anticancer drug 10‐hydroxycamptothecin were self‐assembled into nanoparticles (FPCU/HCPT NPs). The FPCU/HCPT NPs had a suitable size, high drug loading efficiency of ursolic acid (6.4%) and 10‐hydroxycamptothecin (14.1%). The drug release study in vitro indicated that the nanoparticles have obviously sustained effect and pH sensitive behaviors, the drug release amount was higher at pH 5.5 than at pH 7.4. in vitro and in vivo study showed that the nanoparticles displayed a high antitumor efficiency to tumor cells compared with free drug. The nano delivery system as a carrier for ursolic acid (UA) and 10‐hydroxycamptothecin (HCPT) has good application prospects in cancer treatment.     

pH-sensitive polyelectrolyte complex gel microspheres composed of chitosan/sodium tripolyphosphate/dextran sulfate: swelling kinetics and drug delivery properties

Porous chitosan (CS) polyelectrolyte complex (PEC) hydrogel microspheres were prepared via either wet phase-inversion or ionotropic crosslinking with sodium tripolyphosphate (Na+ - TPP) and dextran sulfate (DS). The resulting microspheres were characterized using scanning electron microscopy (SEM) and elemental analysis (EA). The controlled release behavior of ibuprofen (IBU) from these microspheres was investigated. The PEC microspheres were about 700-950 microm in diameter with large pores and open porous structure. The CS/TPP/DS microspheres resisted hydrolysis in strong acid and biodegradation in enzymatic surroundings. The swelling kinetics for CS microspheres was close to Fickian diffusion, whereas those for CS/TPP and CS/TPP/DS were non-Fickian. Furthermore, the equilibrium water content (EWC) and water diffusion coefficient (D) increased with the pH of the media. The release profiles of IBU from CS/TPP/DS microspheres were slow in simulated gastric fluid (SGF, pH 1.4) over 3 h, but nearly all of the initial drug content was released in simulated intestinal fluid (SIF, pH 6.8) within 6 h after changing media. Overall the results demonstrated that CS/TPP/DS microspheres could successfully deliver a hydrophobic drug to the intestine without losing the drug in the stomach, and hence could be potential candidates as an orally administered drug delivery system.     

Formulation of pH-sensitive aminated chitosan–gelatin crosslinked hydrogel for oral drug delivery

The objective of this study is to develop efficient pH-sensitive hydrogel based on aminated chitosan (AmCs) and gelatin (Gel) biopolymers for oral drug delivery. Herein, AmCs was chemically crosslinked with gelatin (Gel) biopolymer with different ratios, while their structures, thermal profiles and morphological properties were investigated by FTIR, TGA and SEM characterization tools, respectively. Moreover, gel-content, crosslinking density and rheological analysis were also performed. The results clarified that the developed AmCs-Gel crosslinked hydrogel displayed variable pH-sensitive swelling profiles. By increasing AmCs ratio, the swelling ratio was boosted at pH 1.2 and declined at pH 7.4. Besides, by increasing gelatin ratio in the hydrogel matrix, the loading efficiency of Oseltamivir phosphate (as a model of drug) was augmented and reached maximum value of 79.0% by AmCs-Gel (2:3) crosslinked hydrogel. The in vitro drug release profiles were investigated for 6 h in simulated gastric fluid [SGF; pH 1.2] and simulated colon fluid [SCF; pH 7.4]. Variable release profiles were realized depending on variation of AmCs and Gel ratios in the crosslinked hydrogel matrix. Finally, the formulated smart crosslinked AmCs-Gel hydrogels demonstrated acceptable biodegradability with no cellular toxicity, suggesting their applicability as pH-sensitive oral drug carriers.