Large-area graphene single crystals grown by low-pressure chemical vapor deposition of methane on copper

Graphene single crystals with dimensions of up to 0.5 mm on a side were grown by low-pressure chemical vapor deposition in copper-foil enclosures using methane as a precursor. Low-energy electron microscopy analysis showed that the large graphene domains had a single crystallographic orientation, with an occasional domain having two orientations. Raman spectroscopy revealed the graphene single crystals to be uniform monolayers with a low D-band intensity. The electron mobility of graphene films extracted from field-effect transistor measurements was found to be higher than 4000 cm(2) V(-1) s(-1) at room temperature.     

Morphology engineering and etching of graphene domain by low-pressure chemical vapor deposition

Controlled growth of single-crystal high-quality ‘track-and-field ground’ shaped graphene domains and the morphological evolution from hexagonal to hexagram graphene domain even square and circular graphene domain has been achieved by low-pressure CVD on solid copper substrate, thereby demonstrating that the shape of the graphene grains can potentially be precisely tuned by optimizing growth parameters. The etching reaction of graphene has also been studied, and results show that a low flow rate of hydrogen (99.999%) is favorable to form hexagonal structure for the etching reaction of graphene due to the exist of oxygen or oxidizing impurities in hydrogen gas commonly used. Controlled growth and etching reaction of graphene determine the final shape of graphene domains and all these efforts contribute to the study of size and morphology and the growth mechanism of graphene domains.     

还原氧化石墨烯表面聚苯胺纳米阵列的制备及电化学电容性能

本文以阳极氧化铝(AAO)膜为模板,通过恒电位法在自组装还原氧化石墨烯(rGO)膜表面制备有序聚苯胺(PANI)纳米线阵列。通过拉曼光谱和场发射扫描电子显微镜分别对其结构和微观形貌进行了表征,并对PANI纳米线阵列的电化学电容性能进行了测试。结果表明,rGO膜表面可电沉积PANI,电沉积得到的PANI纳米线阵列具有比PANI薄膜材料更高的电容和比电容。     

Structure,chemical bonding and electrochemical behavior of heteroatom-substituted carbons prepared by arc discharge and chemical vapor deposition

The structural characteristics, chemical bonding and electrochemical properties of the heteroatom-substituted carbons synthesized by arc discharge and chemical vapor deposition have been investigated. C_xN was prepared only as a soot by arc discharge in nitrogen atmosphere; BC_x and B_xC_yN_z were obtained both as soot and cathode deposits by arc discharge of graphite rods having B₄C and boron nitride (BN) in argon and nitrogen atmospheres, respectively. Transmission electron microscopic study showed that C_xN, BC_x and B_xC_yN_z soots were composed of nanoparticles with diameters of 20–100 nm, while cathode deposits contained nanotubes with diameters of ca. 20 nm or less and nanoparticles with diameters less than 100 nm. It was found from XPS study that C_xN contained a large amount of pyridine type nitrogen atoms at the edge of graphene layer; the BBC₂ structure was dominant in BC_x; and B₃N, B₂NC and BNC₂ structures might exist in B_xC_yN_z. Carbon- and C_xN-coated graphite were prepared by deposition of carbon and C_xN onto natural graphite powder, respectively. The concentrations of coated C_xN layers were between C₂₁N and C₆₂N. Charge–discharge profiles of C_xN, BC_x and B_xC_yN_z soots prepared by arc discharge were similar to each other, giving linearly increasing potential with lithium ion deintercalation. C_xN soot heat-treated at 3000°C showed a similar profile for charge–discharge curves to that of graphite with a charge capacity of 334 mAh g⁻¹. On the other hand, C_xN-coated graphite exhibited as high as 397 mAh g⁻¹ larger than ∼365 mAh g⁻¹ for carbon-coated graphite and that of heat-treated C_xN soot.     

Metallic Li in carbonaceous nanotubes grown by metalorganic chemical vapor deposition from a metalorganic precursor

Metallic Li in carbonaceous nanostructures was obtained in high concentration (as much as 33.4%) through metalorganic chemical vapor deposition involving certain lithium–aminoalkyl moieties, which are formed in situ , by decomposition of a precursor containing both cobalt and lithium. The bimetallic complex containing both lithium and cobalt was characterized by IR spectroscopy, mass spectroscopy, nuclear magnetic resonance spectroscopy, elemental analysis and thermogravimetric analysis. X‐ray photoelectron spectroscopy measurements performed on the as‐grown films demonstrate that lithium can be stable in metallic form in such a film. Results of X‐ray photoelectron spectroscopic analysis of the as‐grown films are presented as direct evidence of the formation and stabilization of metallic lithium in carbon nanotubes. Carbon nanotubes, encapsulating metallic lithium, can potentially act as a miniaturized nanobattery. Such a battery would be potentially useful in the next generation of communication and remote sensing devices, where a pulse of current is required for their operation. In addition, with metallic lithium, having an effective nuclear magnetic moment, such materials can be envisioned to show potential applications in devices based on nuclear magnetic resonances. Copyright © 2008 John Wiley & Sons, Ltd.     

Chemical composition and properties of films produced from hexamethyldisilazane by plasma-enhanced chemical vapor deposition

Relationships between the chemical composition of the gas phase and the properties of SiC_xN_yH_z films produced from hexamethyldisilazane by plasma-enhanced chemical vapor deposition have been studied. The plasma composition has been examined by optical emission spectroscopy. Thermal analysis of the films with simultaneous mass spectrometric detection of released gases has been performed. On the basis of the results and published data, mechanisms for the formation of films by plasma polymerization have been proposed and the film growth at a low plasma power and high reactor temperatures has been found to follow the heterogeneous mechanism.     

Physical and electrical properties of chemical vapor grown GaN Nano/microstructures

Wurtzitic gallium nitride nano- and microleaves were controlled grown through a facile chemical vapor deposition method. This is the first report of GaN nanoleaves, a new morphology of GaN nanostructures. The as-grown GaN structures were characterized by means of X-ray powder diffraction, scanning electron microscopy, energy dispersive X-ray, transmission electron microscopy, and selected area electron diffraction. Raman scattering spectra of the GaN leaves were studied. Field effect transistors based on individual GaN nanoleaves were fabricated, and the electrical transport results revealed a pronounced n-type gating effect of the GaN nanostructures.     

Reversible wettability of a chemical vapor deposition prepared ZnO film between superhydrophobicity and superhydrophilicity

A superhydrophobic ZnO thin film was fabricated by the Au-catalyzed chemical vapor deposition method. The surface of the film exhibits hierarchical structure with nanostructures on sub-microstructures. The water contact angle (CA) was 164.3 degrees, turning into a superhydrophilic one (CA < 5 degrees) after UV illumination, which can be recovered through being placed in the dark or being heated. The film was attached tightly to the substrate, showing good stability and durability. The surface structures were characterized by scanning electron microscopy and atomic force microscopy.     

Carbon-containing nano-titania prepared by chemical vapor deposition and its visible-light-responsive photocatalytic activity

Ultraviolet and visible-light-responsive titania was synthesized and employed in the NO_x photomineralization. A thermal decomposition reaction of titanium isopropoxide was carried out with a metal-organic chemical vapor deposition (MOCVD), enabling continuous production of TiO₂ nanoparticles. Carbon-containing titanium dioxide with the anatase phase prepared at 500 °C under nitrogen atmosphere exhibited high photocatalytic activity for NO oxidation under visible-light illumination. Experimental results indicate that up to 48% removal of NO_x can be achieved in a continuous flow type of reaction system under visible-light illumination (green LED). The chamber temperature in this MOCVD process plays an important role in lattice structure formation, and also affected TiO₂ carbon content. The carbonaceous species on the TiO₂ surface, shown by X-ray diffractometry (XRD), and Raman, UV–vis, and X-ray photoelectron spectroscopies (XPS), is important to the visible-light absorption and visible-light-catalytic mineralization of NO_x.     

Chemical vapor deposition of metal borides: 6. The formation of neodymium boride thin film materials from polyhedral boron clusters and metal halides by chemical vapor deposition

The chemical vapor deposition (CVD) of crystalline thin films of neodymium hexaboride (NdB₆) was achieved using either nido ‐pentaborane(9) or nido ‐decaborane(14) with neodymium(III) chloride on different substrates. The highly crystalline NdB₆ films were formed at relatively moderate temperatures (835 °C, ca. 1 µm/h) and were characterized by scanning electron microscopy, X‐ray emission spectroscopy, X‐ray diffraction and glow discharge mass spectrometry. The NdB₆ polycrystalline films were found to be pure and uniform in composition in the bulk material. Depositions using CoCl₂, NdCl₃ and B₅H₉ as the CVD precursors resulted in the formation of a mixture of NdB₆ and CoB phases, rather than the ternary phase. Copyright © 2008 John Wiley & Sons, Ltd.     

Carbothermal chemical vapor deposition route to Se one-dimensional nanostructures and their optical properties

A simple and practical carbothermal chemical vapor deposition route has been developed for the growth of trigonal phase selenium nanowires and nanoribbons. In detail, the mixture of active carbon and selenium was heated for the chemical reaction to occur, followed by thermal evaporation and decomposition into elemental selenium. The as-prepared sample was characterized by X-ray diffraction, transmission electron microscopy, high-resolution electron microscopy, UV-vis absorption, and photoluminescence. The results show that trigonal Se nanowires have uniform diameters ranging from 20 to 60 nm and grow along the [001] direction, with the same growth direction found for nanoribbons. Spectral measurements suggest a large blue shift and two types of electron transition activity. The influences of experimental conditions on morphologies and growth processes are also discussed. This synthetic method should be able to be extended to grow other one-dimensional chalcogens and chalcogenides nanostructures.     

Magnetic property and structural study of nickel supported on reduced graphene oxide prepared by chemical vapor deposition

Nickel supported on reduced graphene oxide was synthesized by chemical vapor deposition technique. The crystal structure and magnetic properties of the prepared sample were studied by means of Raman spectrometry, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), inductively coupled plasma optical emission spectrometry (ICP-OES), and vibrating sample magnetometry (VSM). The result of Raman spectroscopy revealed the structure of few-layer graphene as the support for Ni nanoparticles. XP spectrum confirmed the presence of metallic Ni on the a few-layer graphene surface. TE micrograph showed that the nickel nanoparticles were sphere shaped and the mean particle size is about 20 nm deposited on the reduced graphene oxide. The magnetic study showed the ferromagnetic behavior of 3.2 wt% nickel over reduced graphene oxide at room temperature.     

Synthesis, characterization, and electrochemical properties of self-assembled leaf-like CuO nanostructures

A simple hydrothermal process was used to synthesize the assembled leaf-like copper oxide (CuO) from copper hydroxide and urea in aqueous solution. The field emission scanning electron microscopy revealed that the individual CuO leaf-like nanostructure has a dimension of about 0.5–1.5 μm in length, 50–70 nm in thickness, and 80–110 nm in width, respectively. These CuO nanostructures were structurally characterized by X-ray diffraction and Raman spectroscopy, which showed that the CuO nanostructures prepared from the hydrothermal process have high crystalline properties with a monoclinic structure. X-ray photoelectron spectroscopy studies confirmed that the as-prepared sample is composed of CuO, which is consistent with X-ray diffraction patterns. The CuO nanostructures were used as electrode materials for lithium-ion batteries, demonstrating electrochemical properties of a high initial discharge capacity of approximately 1,028 mAh/g along with good cycle stability.     

Synthesis, characterization and gas permeation properties of a silica membrane prepared by high-pressure chemical vapor deposition

Cylindrical silica membranes with dead-end structure were prepared by an extended counter-diffusion chemical vapor deposition (CVD) method, in which a tetramethylorthosilicate (TMOS) silica source was fed from the outside of a cylindrical membrane support with γ-alumina interlayer (the membrane side), and oxygen gas was fed from the inside (the support side). Extended counter-diffusion CVD is a method of depositing silica films under highly pressurized conditions applied to the membrane side where TMOS is supplied. Two silica membranes were deposited for 10 h at 573 K under differential pressures of 0.1 MPa and 0.0 MPa applied between the cylindrical membranes. The hydrogen permeances for these silica membranes were unaffected (5 × 10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹ at 573 K), although the methane and carbon dioxide permeances were greatly reduced for dense silica films prepared by high-pressure CVD (HPCVD). Therefore, the selectivity of hydrogen over methane and carbon dioxide was 24,000, and 1200, respectively. It is suggested from energy dispersive X-ray microanalysis (EDX) observations in scanning electron microscopy (SEM) and scanning probe microscopy (SPM) results that this high selectivity was due to the reduced number of defects and/or pinholes formed in the dense silica membranes by HPCVD.     

Self-assembled graphene/azo polyelectrolyte multilayer film and its application in electrochemical energy storage device

Graphene/azo polyelectrolyte multilayer films were fabricated through electrostatic layer-by-layer (LbL) self-assembly, and their performance as electrochemical capacitor electrode was investigated. Cationic azo polyelectrolyte (QP4VP-co-PCN) was synthesized through radical polymerization, postpolymerization azo coupling reaction, and quaternization. Negatively charged graphene nanosheets were prepared by a chemically modified method. The LbL films were obtained by alternately dipping a piece of the pretreated substrates in the QP4VP-co-PCN and nanosheet solutions. The processes were repeated until the films with required numbers of bilayers were obtained. The self-assembly and multilayer surface morphology were characterized by UV-vis spectroscopy, AFM, SEM, and TEM. The performance of the LbL films as electrochemical capacitor electrode was estimated using cyclic voltammetry. Results show that the graphene nanosheets are densely packed in the multilayers and form random graphene network. The azo polyelectrolyte cohesively interacts with the nanosheets in the multilayer structure, which prevents agglomeration of graphene nanosheets. The sheet resistance of the LbL films decreases with the increase of the layer numbers and reaches the stationary value of 1.0 × 10(6) Ω/square for the film with 15 bilayers. At a scanning rate of 50 mV/s, the LbL film with 9 bilayers shows a gravimetric specific capacitance of 49 F/g in 1.0 M Na(2)SO(4) solution. The LbL films developed in this work could be a promising type of the electrode materials for electric energy storage devices.     

Structural and electrochemical properties of a porous nanostructured SnO2 film electrode for lithium-ion batteries

A B₂O₃-doped SnO₂ thin film was prepared by a novel experimental procedure combining the electrodeposition and the hydrothermal treatment, and its structure and electrochemical properties were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) analysis, energy dispersive X-ray (EDX) spectroscopy and galvanostatic charge–discharge tests. It was found that the as-prepared modified SnO₂ film shows a porous network structure with large specific surface area and high crystallinity. The results of electrochemical tests showed that the modified SnO₂ electrode presents the largest reversible capacity of 676 mAh g^?1 at the fourth cycle, close to the theoretical capacity of SnO₂ (790 mAh g^?1); and it still delivers a reversible Li storage capacity of 524 mAh g^?1 after 50 cycles. The reasons that the modified SnO₂ film electrode shows excellent electrochemical properties were also discussed.     

Synthesis of double-walled carbon nanotubes by catalytic chemical vapor deposition and their field emission properties

Double-walled carbon nanotubes (DWCNTs) were synthesized by catalytic chemical vapor deposition using Fe-Mo/MgO as a catalyst at 1000 degrees C under the mixture of methane and hydrogen gas. The nanotubes were purified by acid but were not damaged. Thermogravimetric analysis revealed the purity of the tubes to be about 90%. The high-resolution transmission electron microscopy image showed that DWCNTs have inner tube diameters of 1.4-2.6 nm and outer tube diameters of 2.3-3.4 nm. We observed radial breathing modes in Raman spectra, which are related to the diameter of inner nanotubes. The purified DWCNTs were mixed with organic vehicles and glass frit, and then they were screen-printed on glass substrate coated with indium tin oxide. The field emission properties of the screen-printed DWCNT films were examined by varying the amount of glass frit ingredient within the DWCNT paste. The results showed that DWCNT emitters had good emission properties such as turn-on field of 1.33-1.78 V/microm and high brightness. When the applied anode voltage was gradually increased, current density and brightness became saturated. We also observed DWCNTs adsorbed on the anode plate; they were DWCNTs peeled off from the cathode plate for field emission measurement.     

Stability and electrochemical properties of full-conjugated self-assembled films based on polyaniline and its acid-substituted derivates

<正>The stability of full-conjugated self-assembled(SA) multilayer films based on partially doped polyaniline(PANI) as a polycation and poly(o-aminobenzoic acid)(PCAN),poly(aniline-2-sulfonic acid)(PSAN) as polyanions is investigated in alkali aqueous solutions.The self-assembled PANI-PCAN films keep their stability within 24 h in 1 mol/L NaOH solution,-the PANI-PSAN films,however,maintain the stability for 20 min in the same condition because the solubility of PSAN in alkali solutions is much higher than that of PCAN.The electrochemical properties of the SA films are determined, and the film-CdS composites formed in situ are also reported.     

Hyperbaric laser chemical vapor deposition of carbon fibers from the 1-alkenes, 1-alkynes, and benzene

The growth of long carbon fibers was investigated using hyperbaric-pressure laser chemical vapor deposition (HP-LCVD). Precursors included the unbranched alkenes with linear structure 1-C(x)H(2x) (where x = 2,4,5,6,7,8), the unbranched alkynes, i.e., 1-C(x)H(2)(x-2) (where x = 3,4,5,6,8), and benzene. Rate constants, reaction orders, and apparent activation energies were derived for each precursor over a range of experimental conditions. Axial growth rates from the alkenes were 1-2 orders of magnitude greater than for the alkynes, while growth rates for benzene exceeded 10 mm s(-1). Generalized expressions for the growth rate vs molecular weight were determined. For the alkenes, the growth rate was directly proportional to the square root of the precursor molecular weight, while the alkynes exhibited an inverse relationship. Two regions of differing reaction order were identified for the alkynes; at pressures less than 2.0-2.5 bar, the average reaction order was 3.07, while above 2.0-2.5 bar, reaction orders diverged. Expressions were derived for the fraction of carbon atoms deposited per alkyne molecule transported; the deposition efficiency decreased with molecular weight for the alkynes, due in part to the Soret effect. In contrast, the reaction order for the alkenes was 1.65, and for benzene was 2.25. A phase change in the deposit was observed for both the alkenes and alkynes, with the exceptions of pentene and pentyne. Complete axial rate equations for the alkenes and alkynes were derived, as well as volumetric growth equations for the alkynes. It was shown that the volumetric rate increases nonlinearly with laser power at sufficiently high pressures.