Thermal runaway hazards of <Emphasis Type="Italic">tert</Emphasis>-butyl hydroperoxide by calorimetric studies

Thermal runaway reactions associated with exothermic behaviors of tert-butyl hydroperoxide (TBHP) solutions and TBHP reacting with alkaline contaminants were studied. A differential scanning calorimetry (DSC) was used to characterize these inherent behaviors of TBHP solutions with KOH, NaOH, LiOH and NH₄OH. The exothermic peak in thermal curves of TBHP solutions with different alkali were detected by DSC thermal analysis. By thermal analysis, we compared various heats of decomposition of TBHP solutions with alkaline impurities, and determined the incompatible hazards of various TBHP solutions with alkaline contaminants. Comparing with TBHP in various diluents, the adiabatic runaway reaction via vent sizing package 2 (VSP2) indicated that aqueous TBHP intrinsically possesses the phenomena of thermal explosion with dramatic self-reactive rate and pressure rise under adiabatic conditions. Many commercial organic peroxides may have different hazard behaviors. Therefore, using thermal method to classify the hazards is an important subject.     

Alkylation of pyrocatechol in <Emphasis Type="Italic">tert</Emphasis>-butyl alcohol-sulfuric acid-benzene

Alkylation of pyrocatechol with tert-butyl alcohol in benzene in the presence of sulfuric acid gave 3,5-di-tert-butylbenzene-1,2-diol in a higher yield than in analogous reaction with tert-butyl alcohol. This result was rationalized by reduction of inhibitory effect of liberated water, formation of heterogeneous system, and occurrence of the alkylation process in nonpolar organic phase. Intermediate products were identified and found to undergo intra- and intermolecular tert-butyl group transfer with formation of more stable 3,5-di-tertbutylbenzene-1,2-diol. The formation of p-di-tert-butylbenzene indicated participation of benzene in crossalkylation processes.     

Titanium tetra-<Emphasis Type="Italic">tert</Emphasis>-butoxide-<Emphasis Type="Italic">tert</Emphasis>-butyl hydroperoxide oxidizing system: Physicochemical and chemical aspects

The reaction of titanium tetra-tert-butoxide with tert-butyl hydroperoxide (1: 2) (C₆H₆, 20 C) involves the steps of formation of the titanium-containing peroxide (t-BuO)₃TiOOBu-t and peroxytrioxide (t-BuO)₃TiOOOBu-t. The latter decomposes with the release of oxygen, often in the singlet form, and also homolytically with cleavage of both peroxy bonds. The corresponding alkoxy and peroxy radicals were identified by ESR using spin traps. The title system oxidizes organic substrates under mild conditions. Depending on the substrate structure, the active oxidant species can be titanium-containing peroxide, peroxytrioxide, and oxygen generated by the system.     

Synthesis and cytotoxic activity of derivatives of 6<Emphasis Type="Italic">Z</Emphasis>-acetylmethylenepenicillanic acid <Emphasis Type="Italic">tert</Emphasis>-butyl ester

The sulfoxide of 6Z-[2-(methoxyimino)propylidene]penicillanic acid tert-butyl ester and the sulfones of 6Z-[2-(hydroxyimino-, methoxyimino-, benzyloxyimino-, 2-bromo- and 4-bromobenzyloxyimino)-propylidene]penicillanic acid in the syn and anti forms have been synthesized by the condensation of the sulfoxide and sulfone of 6Z-acetylmethylenepenicillanic acid tert-butyl ester with hydroxylamine, methoxyamine, benzyloxyamine, 2-bromo- and 4-bromobenzyloxyamines. The syn and anti isomers of 3Z-(2-methoxyiminopropylidene)-4R-(benzothiazolyl-2-dithio)-2-oxoazetidinyl-1R-(2-propenyl)acetic acid tert-butyl ester were obtained by opening of the thiazolidine ring in 6Z-[2-(methoxy-imino)propylidene]-1-oxopenicillanic acid tert-butyl ester with 2-mercaptobenzothiazole. The 3Z-(2-methoxyiminopropylidene)-4R-(methylsulfonyl)-2-oxoazetidinyl-1-(2-propylidene)acetic acid tert-butyl ester was synthesized by the interaction of 1,8-diazobicyclo[5.4.0]undec-7-ene and methyl iodide with 6Z-[2-(methoxyimino)propylidene]-1,1-dioxopenicillanic acid tert-butyl ester. A dependence of the cytotoxic effect in relation to cancer and normal cells in vitro on the structure of the substituent in position 6 and the syn and anti isomerism of the oxyimino group was established for the synthesized compounds.     

Specific features of the reaction of vanadyl acetylacetonate with <Emphasis Type="Italic">tert</Emphasis>-butyl hydroperoxide

Reaction of vanadyl acetylacetonate with tert-butyl hydroperoxide (benzene, 20°C) at any molar ratio leads to the elimination of ligand and its oxidation mainly to CO₂ and acetic acid. At the (acac)₂VO: t-BuOOH ratio above 1:10 liberation of oxygen partially in the singlet state takes place.     

Effect of the medium on the reaction of <Emphasis Type="Italic">tert</Emphasis>-butyl hypochlorite with hydrocarbons

The selectivity in the reaction of tert-butyl hypochlorite with 2,3-dimethylbutane in various solvents may be described by a three-parameter correlation equation taking into account the ability of solvents to nonspecific solvation and their cohesion energy density.     

Heat capacities and thermodynamic properties of (<Emphasis Type="Italic">S</Emphasis>)-<Emphasis Type="Italic">tert</Emphasis>-butyl 1-phenylethylcarbamate

An N-tert-butyloxycarbonylated organic synthesis intermediate, (S)-tert-butyl 1-phenylethylcarbamate, was prepared and investigated by means of differential scanning calorimetry (DSC) and thermogravimetry (TG). The molar heat capacities of (S)-tert-butyl 1-phenylethylcarbamate were precisely determined by means of adiabatic calorimetry over the temperature range of 80-380 K. There was a solid–liquid phase transition exhibited during the heating process with the melting point of 359.53 K. The molar enthalpy and entropy of this transition were determined to be 29.73 kJ mol⁻¹ and 82.68 J K⁻¹ mol⁻¹ based on the experimental C _p–T curve, respectively. The thermodynamic functions, [H_T⁰ - H_298.15⁰ H_{T}^{0} - H_{298.15}^{0} ] and [S_T⁰ - S_298.15⁰ S_{T}^{0} - S_{298.15}^{0} ], were calculated from the heat capacity data in the temperature range of 80–380 K with an interval of 5 K. TG experiment showed that the pyrolysis of the compound was started at the temperature of 385 K and terminated at 510 K within one step.     

Interaction of 9-substituted anthracenes with oxidation systems <Emphasis Type="Italic">tert</Emphasis>-butylhydroperoxide-metal <Emphasis Type="Italic">tert</Emphasis>-butoxide

9-R-Anthracenes (R = Me, Ph) are effective acceptors of peroxyl and metalalkoxyl radicals in the systems tert-butylhydroperoxide-metal tert-butoxide (M = Al, V, Cr; C₆H₆, 20°C). Isolation of 9-R-9,10-dihydro-9,10-di-tert-butylperoxyanthracenes, 10-R-10-tert-butylperoxy-9-anthrones as major products reliably confirms the formation of tert-butylperoxy radicals and can be used for quantitative assessment of their content.     

DSC studies on protein isolate of guava seeds <Emphasis Type="Italic">Psidium guajava</Emphasis>

Glutelin, the major protein fraction from guava seed, was obtained by fractioning as described by Osborne. The total proteins were extracted and the isolates obtained by isoelectric precipitation presented similar DSC curves, concordant with the results obtained by gel filtration chromatography and electrophoresis in polyacrylamide gel (PAGE-SDS). However, the DSC curves showed a higher enthalpy with regard to the denaturing protein isolate (PI) extracted at pH 10.0 when compared to a PI at pH 11.5. Such results are in accordance with those obtained for PI extracted at pH 10.0 using chromatography, this one being present in the form of molecular aggregates of greater molecular mass. The glutelin fraction, however, did not present a denaturation peak in the DSC curve, showing that the process for obtaining the same significantly altered its conformation.     

Mono-<Emphasis Type="Italic">meso</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-butylporphyrin

Summary. Treatment of meso-tetra(tert-butyl)porphyrin with sulfuric acid/n-butanol affords a mixture of porphyrin and mono-tert-butylporphyrin in relatively high yield.     

Synthesis and stereoisomerism of derivatives of <Emphasis Type="Italic">tert</Emphasis>-butyl 7-alkylideneceph-3-em-4-carboxylate

By condensation of tert-butyl 3-methyl-7-oxoceph-3-em-4-carboxylate and its 3-acetoxymethyl analog with acetylmethylenetriphenylphosphorane and 3-trimethylsilylpropyn-2-ylindenetriphenylphosphorane tert-butyl 7Z-acetylmethylene-3-methylceph-3-em-4-carboxylate and also 7Z-and 7E-isomers of tert-butyl 3-acetoxymethyl-7-(3-trimethylsilylpropyn-2-ylidene)ceph-3-em-4-carboxylates were synthesized. Oxidation of these compounds with 1 equivalent of meta-chloroperbenzoic acid gave their 1R-and 1S-sulfoxides, and oxidation with 2 equivalents gave the corresponding sulfones. According to data from ¹H NMR spectroscopy, the carbonyl of the β-lactam descreens proton H-9 of the alkylidene group in the 7Z-isomers more strongly than in the 7E-isomers, shifting their signals to weaker field. Analogous shifts of the H-6 signal to weaker field was observed in the 1R-sulfoxides in comparison with that for the 1S-sulfoxide. These results were confirmed by X-ray crystallography of tert-butyl 7Z-acetylmethylene-3-methyl-1S-oxoceph-3-em-4-carboxylate and tert-butyl 7Z-acetylmethylene-3-methyl-1,1-dioxoceph-3-em-4-carboxy-late. In memory of Professor A.A. Potekhin __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, 618–626, April, 2008.     

New synthetic approach to aminoethoxy derivatives of <Emphasis Type="Italic">p</Emphasis>-(<Emphasis Type="Italic">tert</Emphasis>-butyl)calix[4]arene

A new procedure has been proposed for the synthesis of mono- and bis(2-aminoethoxy)-p-(tertbutyl) calix[4]arenes from the corresponding mono- and bis[2-(1,3-dioxoisoindol-2-yl)ethoxy]-p-(tert-butyl)-calix[4]arenes.     

Modeling liquid thermal explosion reactor containing <Emphasis Type="Italic">tert</Emphasis>-butyl peroxybenzoate

This study investigated the role played by green thermal analysis technology in promoting the use of resources, preventing pollution, reducing energy consumption and protecting the environment. The chemical tert-butyl peroxybenzoate (TBPB) has been widely employed in the petrifaction industries as an initiator of polymerization formation agent. This study established the thermokinetic parameters and thermal explosion hazard for a reactor containing TBPB via differential scanning calorimetry (DSC). To simulate thermokinetic parameters, a 5-ton barrel reactor of liquid thermal explosion model was created in this study. The approach was to develop a precise and effective procedure on thermal decomposition, runaway, and thermal hazard properties, such as activation energy (E _a), control temperature (CT), critical temperature (TCR), emergency temperature (ET), heat of decomposition (∆H _d), self-accelerating decomposition temperature (SADT), time to conversion limit (TCL), total energy release (TER), time to maximum rate under isothermal condition (TMR _iso), etc. for a reactor containing TBPB. Experimental results established the features of thermal decomposition and huge size explosion hazard of TBPB that could be executed as a reduction of energy potential and storage conditions in view of loss prevention.     

<Emphasis Type="Italic">Z</Emphasis>-and <Emphasis Type="Italic">E</Emphasis>-conformers of <Emphasis Type="Italic">N</Emphasis>-chloroacetylcytisine

N-Chloroacetylcytisine was synthesized by acylation of (–)-cytisine. Stable Z- and E-conformers with respect to rotational isomerism around the N-12–CO bond were found in PMR spectra at room temperature. The point at which PMR resonances of the Z- and E-conformers coalesced upon heating was measured. The transition barrier between the conformers was estimated.     

The effect of reaction conditions on MoB activation in 1-octene epoxidation with <Emphasis Type="Italic">tert</Emphasis>-butyl hydroperoxide

The change in the surface composition of a MoB catalyst in the epoxidation of 1-octene with tert-butyl hydroperoxide and the effects of the reactant concentrations and reaction products (tert-butanol and 1,2-epoxyoctane) on this process have been studied.     

Properties of single-component acrylic pressure-sensitive adhesives synthesized using <Emphasis Type="Italic">tert</Emphasis>-butyl peroxypivalate initiator

In this work, tert-butyl peroxypivalate initiator was newly used in the solution polymerization of acrylic copolymers with 2-ethylhexyl acrylate, butyl acrylate, methyl methacrylate and acrylic acid monomers for application of pressure-sensitive adhesives (PSAs). Its proper dosage was determined to vary from 0.6 to 1.2 wt % when a high monomer conversion (>99%) was ensured. In this amount range, polymer properties and adhesive performance of the PSAs were investigated. The results indicated that with the amount of tert-butyl peroxypivalate increased, the molecular weights of the polymer decreased and the molecular weight distribution became wider. It was also observed that the synthesized PSAs had high interfacial adhesion and low cohesion strength, and thus exhibited cohesive failure during the peel test. So cross-linking agent was employed to improve the shear strength of the PSAs and to eliminate the adhesive residue while at the sacrifice of loop tack and peel strength. As a whole, the optimal performance was obtained by using 1.2 wt % amount of initiator and 0.5 wt % concentration of cross-linker. In this case, the peel and shear strength have achieved the best balance. In addition, for the cross-linked PSA tapes, the peel strength slightly decreased with the dwell time.     

Molecular structure of di-<Emphasis Type="Italic">tert</Emphasis>-butylamine-containing the monoedge-functionalized clathrochelate iron(II) <Emphasis Type="Italic">tris</Emphasis>-dioximate

The structure of 1,8-bis(fluoroboro)-2,7,9,14,15,20-hexaoxa-3,6,10,13,16,19-hexaaza-4,5,11,12-tetraphenyl-17,18-bisc(tert-butylamino)-bicyclo[6.6.6]eicosa-3,5,10,12,16,18-hexaene(2−)iron(2+) tris-dioximate clathrochelate was determined by X-ray diffraction (XRD) analysis. The compound has a molecular structure and crystallizes as triclinic crystals: a = 10.7673(2) Å, b = 11.9520(4) Å, c = 22.5473(7) Å, α = 75.729(1)°, β = 89.161(1)°, γ = 65.334(1)°, V = 2542.64(13) ų, Z = 2, space group 1. P1ˉ. Original Russian Text Copyright ? 2007 by A. B. Burdukov, N. V. Pervukhina, M. A. Vershinin, and Ya. Z. Voloshin __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 48, No. 2, pp. 366–369, March–April, 2007.     

Interaction of Fluosilicic Acid with <Emphasis Type="Italic">N-tert</Emphasis>-Butyl-Substituted Urea. Crystal Structure of <Emphasis Type="Italic">N,N</Emphasis>-Di-<Emphasis Type="Italic">tert</Emphasis>-butylurea

Fluosilicic acid reacts with solutions of N,N-di-tert-butylurea (DTBU) in methanol or acetone to form crystalline compounds 2DTBU ? H₂SiF₆ and 2DTBU ? H₂SiF₆ ? Me₂CO, which were characterized by the IR and ¹⁹F NMR spectra and mass spectroscopy supplemented by theoretical calculations. According to the data of IR and ¹⁹F NMR spectra, the complexes are hexafluorosilicates of O-protonated DTBU. They undergo hydrolysis in organic media with water traces; their solubility in water is very low (0.10 and 0.14 wt %, respectively). In the DTBU structure, two independent ligand molecules are joined by hydrogen bonds NH?O(N?O) 2.888(5)–2.944(5) Å).     

System vanadium alkoxy compound-<Emphasis Type="Italic">tert</Emphasis>-butyl hydroperoxide-oxidant of hydrocarbon C-H bonds

Vanadium alkoxy compounds [(t-BuO)₄V, (t-BuO)₃VO] react with tert-butyl hydroperoxide (C₆H₆, 20°C) to liberate oxygen, partly in the singlet form, and to form alkoxyl and peroxyl radicals via the intermediacy of vanadium peroxides and trioxide. These systems are capable of oxidizing hydrocarbon C-H bonds. The process is radical in nature and involves formation of carbon-centered radicals and their reaction with oxygen generated in the systems. Vanadium-containing peroxides, too, take part in the oxidation reaction.     

Reactivity in the solid-state between ZnWO<Subscript>4</Subscript> and some rare-earth metal molybdates RE<Subscript>2</Subscript>MoO<Subscript>6</Subscript> (<Emphasis Type="Italic">RE</Emphasis>=Y,Sm, Eu,Gd, Dy,Ho, Er and Lu)

Organic peroxides (OPs) have caused many momentous explosions and runaway reactions, resulting from thermal instability, chemical pollutants, and even mechanical shock. In Taiwan, dicumyl peroxide (DCPO), due to its unstable reactive nature, has caused two thermal explosions and runaway reaction incidents in the manufacturing process. To evaluate thermal hazards of DCPO in a batch reactor, we studied thermokinetic parameters, such as heat of decomposition (†H _d), exothermic onset temperature (T ₀), maximum temperature rise ((dT/dt)_max), maximum pressure rise ((dP/dt)_max), self-heating rate (dT/dt), etc., via differential scanning calorimetry (DSC) and vent sizing package 2 (VSP2).