Acylhydrazone-based supramolecular assemblies undergoing a converse sol-to-gel transition on trans → cis photoisomerization

Photoisomeric supramolecular assemblies have drawn enormous attention in recent years. Although it is a general rule that photoisomerization from a less to a more distorted isomer causes the destruction of assemblies, this photoisomerization process inducing a converse transition from irregular aggregates to regular assemblies is still a great challenge. Here, we report a converse sol-to-gel transition derived from the planar to nonplanar photoisomer conversion, which is in sharp contrast to the conventional light-induced gel collapse. A well-designed acylhydrazone-linked monomer is exploited as a photoisomer to realize the above-mentioned phase transition. In the monomer, imine is responsible for trans–cis interconversion and amide generates intermolecular hydrogen bonds enabling the photoisomerization-driven self-assembly. The counterintuitive feature of the sol-to-gel transition is ascribed to the partial trans → cis photoisomerization of acylhydrazone causing changes in stacking mode of monomers. Furthermore, the reversible phase transition is applied in the valves formed in situ in microfluidic devices, providing fascinating potential for miniature materials.

A converse sol-to-gel transition system based on trans → cis photoisomerization of acylhydrazone-based supramolecular assemblies has been sucessfully established, which was applied in the gel-based microvalves that can in situ control flow by light.     

Synthesis of unsymmetrically tetrasubstituted pyrroles and studies of AIEE in pyrrolo[1,2-a]pyrimidine derivatives

Pyrroles are among the most important heterocycles in pharmaceuticals and agrochemicals. Construction of pyrrole scaffolds with different substituents and a free NH group, however, is challenging. Herein, a metal-free method for the synthesis of unsymmetrically tetrasubstituted NH-pyrroles using a consecutive chemoselective double cyanation is reported. The desired pyrroles were obtained with yields up to 99% and good functional group tolerance. Mechanistic studies identified a reaction mechanism that features a subtle sequence of first cyano-addition and migration, followed by cyano-addition and aromatization to afford the pyrrole skeleton. Pyrrolo[1,2-a]pyrimidines are synthesized as the synthetic applications of NH-pyrroles, and these pyrrolo[1,2-a]pyrimidines exhibit unpredicted time-dependent aggregation-induced emission enhancement (AIEE) properties.

A novel method for the challenging synthesis of unsymmetrically tetrasubstituted NH-pyrroles from chalcone derivatives is reported. The pyrrolo[1,2-a]pyrimidine derivatives that were synthesized from NH-pyrroles exhibit AIE and AIEE property.     

C2-ketonylation of carbohydrates via excited-state palladium-catalyzed 1,2-spin-center shift

C2-ketonyl-2-deoxysugars, sugars with the C2-hydroxyl group replaced by a ketone side chain, are important carbohydrate mimetics in glycobiology and drug discovery studies; however, their preparation remains a vital challenge in organic synthesis. Here we report the first direct strategy to synthesize this class of glycomimetics from readily available 1-bromosugars and silyl enol ethers via an excited-state palladium-catalyzed 1,2-spin-center shift (SCS) process. This step-economic reaction features broad substrate scope, has a high functional group tolerance, and can be used in late-stage functionalization of natural product- and drug-glycoconjugates. Preliminary experimental and computational mechanistic studies suggested a non-chain radical mechanism involving photoexcited palladium species, a 1,2-SCS process, and a radical Mizoroki–Heck reaction.

The excited-state palladium-catalyzed 1,2-spin-center shift process streamlines the synthesis of C2-ketonyl sugars. This step-economic reaction has a broad scope and allows late-stage functionalization of natural product- and drug-glycoconjugates.     

Selective functionalization of the 1H-imidazo[1,2-b]pyrazole scaffold. A new potential non-classical isostere of indole and a precursor of push–pull dyes

We report the selective functionalization of the 1H-imidazo[1,2-b]pyrazole scaffold using a Br/Mg-exchange, as well as regioselective magnesiations and zincations with TMP-bases (TMP = 2,2,6,6-tetramethylpiperidyl), followed by trapping reactions with various electrophiles. In addition, we report a fragmentation of the pyrazole ring, giving access to push–pull dyes with a proaromatic (1,3-dihydro-2H-imidazol-2-ylidene)malononitrile core. These functionalization methods were used in the synthesis of an isostere of the indolyl drug pruvanserin. Comparative assays between the original drug and the isostere showed that a substitution of the indole ring with a 1H-imidazo[1,2-b]pyrazole results in a significantly improved solubility in aqueous media.

A methodology for the selective functionalization of the 1H-imidazo[1,2-b]pyrazole scaffold has been developed and used in the synthesis of novel push–pull dyes and a non-classical isostere of the indolyl drug pruvanserin.     

Iridium-catalyzed asymmetric trans-selective hydrogenation of 1,3-disubstituted isoquinolines

The development of the first asymmetric trans-selective hydrogenation of 1,3-disubstituted isoquinolines is reported. Utilizing [Ir(cod)Cl]₂ and a commercially available chiral Josiphos ligand, a variety of differentially substituted isoquinolines are hydrogenated to produce enantioenriched trans-tetrahydroisoquinolines in good yield with high levels of enantioselectivity. Directing group studies demonstrate that the hydroxymethyl functionality at the C1 position is critical for hydrogenation to favor the trans-diastereomer. Preliminary mechanistic studies reveal that non-coordinating chlorinated solvents and halide additives are crucial to enable trans-selectivity.

trans-Selective asymmetric hydrogenation of 1,3-disubstituted isoquinolines.     

Total synthesis of Lentinus giganteus glycans with antitumor activities via stereoselective α-glycosylation and orthogonal one-pot glycosylation strategies

The accessibility to long, branched and complex glycans containing many 1,2-cis glycosidic linkages with precise structures remains a challenging task in chemical synthesis. Reported here is an efficient, stereoselective and orthogonal one-pot synthesis of a tetradecasaccharide and shorter sequences from Lentinus giganteus polysaccharides with antitumor activities. The synthetic strategy consists of: (1) newly developed merging reagent modulation and remote anchimeric assistance (RMRAA) α-(1→6)-galactosylation in a highly stereoselective manner, (2) DMF-modulated stereoselective α-(1→3)-glucosylation, (3) RMRAA stereoselective α-(1→6)-glucosylation, (4) several orthogonal one-pot glycosylations on the basis of N-phenyltrifluoroacetimidate (PTFAI) glycosylation, Yu glycosylation and ortho-(1-phenylvinyl)benzoate (PVB) glycosylation to streamline oligosaccharide synthesis, and (5) convergent [7 + 7] glycosylation for the final assembly of the target tetradecasaccharide. In particular, this new RMRAA α-galactosylation method has mild reaction conditions, broad substrate scopes and significantly shortened step counts for the heptasaccharide synthesis in comparison with 4,6-di-tert-butylsilyene (DTBS) directed α-galactosylation. Furthermore, DFT calculations shed light on the origins of remote anchimeric assistance effects (3,4-OBz > 3,4-OAc > 4-OBz > 3-OBz) of acyl groups.

Stereoselective and one-pot synthesis of Lentinus giganteus glycans with antitumor activities has been accomplished, which features a newly developed merging reagent modulation and remote anchimeric assistance (RMRAA) α-galactosylation strategy.     

Influence of Linkage Stereochemistry and Protecting Groups on Glycosidic Bond Stability of Sodium Cationized Glycosyl Phosphates

Energy-resolved collision-induced dissociation (ER-CID) experiments of sodium cationized glycosyl phosphate complexes, [GP _x +Na]⁺, are performed to elucidate the effects of linkage stereochemistry (α versus β), the geometry of the leaving groups (1,2-cis versus 1,2-trans), and protecting groups (cyclic versus non-cyclic) on the stability of the glycosyl phosphate linkage via survival yield analyses. A four parameter logistic dynamic fitting model is used to determine CID_50% values, which correspond to the level of rf excitation required to produce 50% dissociation of the precursor ion complexes. Present results suggest that dissociation of 1,2-trans [GP _x +Na]⁺ occurs via a McLafferty-type rearrangement that is facilitated by a syn orientation of the leaving groups, whereas dissociation of 1,2-cis [GP_x+Na]⁺ is more energetic as it involves the formation of an oxocarbenium ion intermediate. Thus, the C1?C2 configuration plays a major role in determining the stability/reactivity of glycosyl phosphate stereoisomers. For 1,2-cis anomers, the cyclic protecting groups at the C4 and C6 positions stabilize the glycosidic bond, whereas for 1,2-trans anomers, the cyclic protecting groups at the C4 and C6 positions tend to activate the glycosidic bond. The C3 O-benzyl (3 BnO) substituent is key to determining whether the sugar or phosphate moiety retains the sodium cation upon CID. For 1,2-cis anomers, the 3 BnO substituent weakens the glycosidic bond, whereas for 1,2-trans anomers, the 3 BnO substituent stabilizes the glycosidic bond. The C2 O-benzyl substituent does not significantly impact the glycosidic bond stability regardless of its orientation.

Open image in new window

Graphical abstract ?

     

Lanthanum Trifluoromethane-sulfonate‐Catalyzed Facile Synthesis of Per‐O‐acetylated Sugars and Their One‐Pot Conversion to S‐Aryl and O‐Alkyl/Aryl Glycosides†

Lanthanum trifluoromethanesulfonate‐catalyzed solvent‐free per‐O‐acetylation with stoichiometric acetic anhydride proceeds in high yield (95%–99%) to afford exclusively pyranose products as anomeric mixtures. Subsequent anomeric substitution employing borontrifluoride etherate and thiols or alcohols furnished the corresponding 1,2‐trans‐linked thioglycosides and O‐glycosides, respectively, in good to excellent overall yield (75%–85%). Alternatively, reaction of free sugars in neat alcohol employing the same catalyst at elevated temperature gives the corresponding 1,2‐cis‐linked O‐glycosides (along with 1,2‐trans‐linked glycosides as minor product) in good yield (73%–80%). Anomeric mixtures of compounds thus produced were characterized as their per‐O‐acetylated derivatives.      

A molecular recognition platform for the simultaneous sensing of diverse chemical weapons

Chemical warfare agents (CWAs) such as phosgene and nerve agents pose serious threats to our lives and public security, but no tools can simultaneously screen multiple CWAs in seconds. Here, we rationally designed a robust sensing platform based on 8-cyclohexanyldiamino-BODIPY (BODIPY-DCH) to monitor diverse CWAs in different emission channels. Trans-cyclohexanyldiamine as the reactive site provides optimal geometry and high reactivity, allowing trans-BODIPY-DCH to detect CWAs with a quick response and high sensitivity, while cis-BODIPY-DCH has much weaker reactivity to CWAs due to intramolecular H-bonding. Upon reaction with phosgene, trans-BODIPY-DCH was rapidly converted to imidazolone BODIPY (<3 s), triggering green fluorescence with good sensitivity (LOD = 0.52 nM). trans-BODIPY-DCH coupled with nerve agent mimics, affording a blue fluorescent 8-amino-BODIPY tautomer. Furthermore, a portable test kit using trans-BODIPY-DCH displayed an instant response and low detection limits for multiple CWAs. This platform enables rapid and highly sensitive visual screening of various CWAs.

Chemical warfare agents (CWAs) such as phosgene and nerve agents pose serious threats to our lives and public security, necessitating tools that can simultaneously screen multiple CWAs in seconds.     

Phenanthroline-imine ligands for iron-catalyzed alkene hydrosilylation

Iron-catalyzed organic reactions have been attracting increasing research interest but still have serious limitations on activity, selectivity, functional group tolerance, and stability relative to those of precious metal catalysts. Progress in this area will require two key developments: new ligands that can impart new reactivity to iron catalysts and elucidation of the mechanisms of iron catalysis. Herein, we report the development of novel 2-imino-9-aryl-1,10-phenanthrolinyl iron complexes that catalyze both anti-Markovnikov hydrosilylation of terminal alkenes and 1,2-anti-Markovnikov hydrosilylation of various conjugated dienes. Specifically, we achieved the first examples of highly 1,2-anti-Markovnikov hydrosilylation reactions of aryl-substituted 1,3-dienes and 1,1-dialkyl 1,3-dienes with these newly developed iron catalysts. Mechanistic studies suggest that the reactions may involve an Fe(0)–Fe(ii) catalytic cycle and that the extremely crowded environment around the iron center hinders chelating coordination between the diene and the iron atom, thus driving migration of the hydride from the silane to the less-hindered, terminal end of the conjugated diene and ultimately leading to the observed 1,2-anti-Markovnikov selectivity. Our findings, which have expanded the types of iron catalysts available for hydrosilylation reactions and deepened our understanding of the mechanism of iron catalysis, may inspire the development of new iron catalysts and iron-catalyzed reactions.

Newly developed iron complexes bearing 2-imino-9-aryl-1,10-phenanthroline ligands were successfully used to catalyze hydrosilylation of terminal alkenes and conjugated dienes in high yields with excellent anti-Markovnikov selectivity.     

A general method for the synthesis of oligosaccharides consisting of α-(1→2)- and α-(1→3)-linked rhamnan backbones and GlcNAc side chains

A general method has been developed for the synthesis of oligosaccharides consisting of (1→2)- and (1→3)-linked rhamnans with GlcNAc side chains. As examples, highly effective and convergent syntheses of two decasaccharides in the O polysaccharide moiety of the lipopolysaccharide of the phytopathogenic bacterium Pseudomonas syringae pv. ribicola NCPPB 1010 were achieved. The two decasaccharides consist of O polysaccharide repeating units I+II and II+I, respectively. Allyl 3-O-acetyl-4-O-benzoyl-α-l-rhamnopyranoside, allyl 2-O-benzoyl-3-O-chloroacetyl-α-l-rhamnopyranoside, 2,4-di-O-benzoyl-3-O-chloroacetyl-α-l-rhamnopyranosyl trichloroacetimidate, and 3-O-acetyl-2,4-di-O-benzoyl-α-l-rhamnopyranosyl trichloroacetimidate, which were obtained by highly regioselective 3-O-acylations, were used as the key synthons to obtain the required α-(1→2)- and α-(1→3)-linked rhamnoocta saccharide acceptors with 3³- and 3⁷-free hydroxyl groups. Therefore, several disaccharides were synthesized, from which tetrasaccharides and hexasaccharides were then synthesized. Coupling of the hexasaccharide donors with the disaccharide acceptors gave the octasaccharide acceptors. Finally, the coupling of 3,4,6-tri-O-acetyl-2-deoxy-2-phthalimido-β-d-glucopyranosyl trichloroacetimidate with the octasaccharide acceptors, followed by deprotection, afforded the two target decasaccharides. A repeating hexasaccharide unit of the cell wall polysaccharide of β-hemolytic Streptococci Group A was also synthesized in a similar way.     

Glycosylidene Carbenes. Part 14. Glycosidation of partially protected galactopyranose-, glucopyranose-, and mannopyranose-derived vicinal diols

The relation between H-bonding in diequatorial trans-1,2 and axial, equatorial cis-1,2-diols and the regioselectivity of glycosidation by the diazirine 1 was examined. H-Bonds were assigned on the basis of FT-IR and ¹H-NMR spectra (Fig. 1). Glycosidation by 1 of the gluco-configurated diequatorial trans-2,3-diols 4–7 yielded the mono-glucosylated products 16/17/20/21 (69–89%); 1,2-/1,3-linked products (37–46:63–54), 24/25/28/29 (60–63%; 1,2-/1,3-linked products 46–51:54–49), 32–35 (69–94%; 1,2-/1,3-linked products 45–52:55–48), and 36/37/40/41 (59–63%; 1,2-/1,3-linked products 52–59:48–41), respectively (Scheme 1, Table 3). The disaccharides derived from 4, 5 , and 7 were characterized as their acetates 18/19/22/23, 26/27/30/31 , and 38/39/42/43 , respectively. Glycosidation of the galacto-configurated diequatorial 2,3-diols 8 and 9 and the manno-configurated diequatorial 3,4-diol 10 by 1 (Scheme 2, Table 3) also proceeded in fair yields to give the disaccharides 44–47 (69–80%;1,2-/1,3-linked products ca. 1:1), 48–51 (51–61%;1,2/-1,3-linked products 54–56:56–54), and 56/57/60/61 (71–80%; 1,3-/1,4-linked products 49–54:51–46), respectively. The 1,3-linked disaccharides 56/57 derived from the diol 10 were characterized as the acetates 58/59 . The regio- and stereoselectivities of the glycosidation by 1 were much better for the α-D -manno-configurated axial, equatorial cis-2,3-diol 11 and the galacto-configurated axial, equatorial cis-3,4-diol 13 (1,2-/1,3-linked disaccharides ca. 3:7 for 11 and 1,3-/1,4-linked disaccharides ca. 4:1 for 13 ; Scheme 3, Table 4). The regio- and stereoselectivity for the β-D -manno-configurated cis-2,3-diol 12 were, however, rather poor (1,2-/1,3-linked products 48:52). The 1,2-linked disaccharides 66/67 derived from 12 were characterized as the acetates 70/71 . Koenigs-Knorr-type glycosidation of the cis-diols 11–13 by 2 or 3 proceeded with a similar regio- and a higher stereoselectivity (α-D > β-D with the donor 2 and α-D < β-D with the donor 3 ) than with 1 , with the exception of 12 which did not react with 2 . The regioselectivity of the glycosidations by 1 agrees fully with the H-bonding scheme of the diols and with the hypothesis that the intermediate carbene is preferentially protonated by the most weakly H-bonded OH group. The regioselectivity of the glycosidation by 2 and by 3 is determined by a higher reactivity of the equatorial OH groups and by H-bonding. Several H-bonded and equilibrating isomers of a given diol may intervene in the glycosidation by 1 , or by 2 and 3 , resulting in the same regioselectivity. The low nucleophilicity of 12 and the low degree of regioselectivity in its reaction with 3 show that stereoelectronic effects may also profoundly influence the nucleophilicity of OH groups.     

Triterpenoid Saponins from the Cultivar “Green Elf” of Pittosporum tenuifolium

Four oleanane-type glycosides were isolated from a horticultural cultivar “Green Elf” of the endemic Pittosporum tenuifolium (Pittosporaceae) from New Zealand: three acylated barringtogenol C glycosides from the leaves, with two previously undescribed 3-O-β-d-glucopyranosyl-(1→2)-[α-l-arabinopyranosyl-(1→3)]-β-d-glucuronopyranosyl-21-O-angeloyl-28-O-acetylbarringtogenol C, 3-O-β-d-galactopyranosyl-(1→2)-[α-l-arabinopyranosyl-(1→3)]-β-d-glucuronopyranosyl-21-O-angeloyl-28-O-acetylbarringtogenol C, and the known 3-O-β-d-glucopyranosyl-(1→2)-[α-l-arabinopyranosyl-(1→3)]-β-d-glucuronopyranosyl-21-O-angeloyl-28-O-acetylbarringtogenol C (Eryngioside L). From the roots, the known 3-O-β-d-glucopyranosyl-(1→2)-β-d-galactopyranosyl-(1→2)-β-d-glucuronopyranosyloleanolic acid (Sandrosaponin X) was identified. Their structures were elucidated by spectroscopic methods including 1D- and 2D-NMR experiments and mass spectrometry (ESI-MS). According to their structural similarities with gymnemic acids, the inhibitory activities on the sweet taste TAS1R2/TAS1R3 receptor of an aqueous ethanolic extract of the leaves and roots, a crude saponin mixture, 3-O-β-d-glucopyranosyl-(1→2)-[α-l-arabinopyranosyl-(1→3)]-β-d-glucuronopyranosyl-21-O-angeloyl-28-O-acetylbarringtogenol C, and Eryngioside L were evaluated.     

Synthesis and molecular structures of dinuclear complexes with 1,2-dihydro-1,2-diphenyl-naphtho[1,8-c,d]1,2-diphosphole as a bridging ligand

A bisphosphine in which a PhP-PPh bond bridges 1,8-positions of naphthalene, 1,2-dihydro-1,2-diphenyl-naphtho[1,8-cd]-1,2-diphosphole (1), was used as a bridging ligand for the preparation of dinuclear group 6 metal complexes. Free trans-1, a more stable isomer having two phenyl groups on phosphorus centers mutually trans with respect to a naphthalene plane, was allowed to react with two equivalents of M(CO)₅(thf) (M = W, Mo, Cr) at room temperature to give dinuclear complexes (OC)₅M(μ-trans-1)M(CO)₅ (M = W (2a), Mo (2b), Cr (2c)). The preparation of the corresponding dinuclear complexes bridged by the cis isomer of 1 was also carried out starting from the free trans-1 in the following way. Mono-nuclear complexes M(trans-1)(CO)₅ (M = W (3a), Mo (3b), Cr (3c)) which had been prepared by a reaction of trans-1 with one equivalent of the corresponding M(CO)₅(thf) (M = W, Mo, Cr) complex, were heated in toluene, wherein a part of the trans-3a-c was converted to their respective cis isomer M(cis-1)(CO)₅. Each cis trans mixture of the mono-nuclear complexes 3a-c was treated with the corresponding M(CO)₅(thf) to give a cis trans mixture of the respective dinuclear complexes 2a-c. The cis isomer of the ditungsten complex 2a was isolated, and its molecular structure was confirmed by X-ray analysis, showing a shorter W?W distance of 5.1661(3) Å than that of 5.8317(2) Å in trans-2a.     

Impact of symmetry-breaking of non-fullerene acceptors for efficient and stable organic solar cells

The concurrent enhancement of short-circuit current (J_SC) and open-circuit voltage (V_OC) is a key problem in the preparation of efficient organic solar cells (OSCs). In this paper, we report efficient and stable OSCs based on an asymmetric non-fullerene acceptor (NFA) IPC-BEH-IC2F. The NFA consists of a weak electron-donor core dithienothiophen[3,2-b]-pyrrolobenzothiadiazole (BEH) and two kinds of strong electron-acceptor (A) units [9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) with a tricyclic fused system and 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC2F)]. For comparison, the symmetric NFAs IPC-BEH-IPC and IC2F-BEH-IC2F were characterised. The kind of flanking A unit significantly affects the light absorption features and electronic structures of the NFAs. The asymmetric IPC-BEH-IC2F has the highest extinction coefficient among the three NFAs owing to its strong dipole moment and highly crystalline feature. Its highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels lie between those of the IPC-BEH-IPC and IC2F-BEH-IC2F molecules. The IPC group also promotes molecular packing through the tricyclic π-conjugated system and achieves increased crystallinity compared to that of the IC2F group. Inverted-type photovoltaic devices based on p-type polymer:NFA blends with PBDB-T and PM6 polymers as p-type polymers were fabricated. Among all these devices, the PBDB-T:IPC-BEH-IC2F blend device displayed the best photovoltaic properties because the IPC unit provides balanced electronic and morphological characteristics. More importantly, the PBDB-T:IPC-BEH-IC2F-based device exhibited the best long-term stability owing to the strongly interacting IPC moiety and the densely packed PBDB-T:IPC-BEH-IC2F film. These results demonstrate that asymmetric structural modifications of NFAs are an effective way for simultaneously improving the photovoltaic performance and stability of OSCs.

A 9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) moiety in asymmetric non-fullerene acceptors promotes the formation of a densely packed crystalline structure, enabling efficient and long-term stable organic solar cells.     

Radical boron migration of allylboronic esters

A photocatalyzed 1,3-boron shift of allylboronic esters is reported. The boron atom migration through the allylic carbon skeleton proceeds via consecutive 1,2-boron migrations and Smiles-type rearrangement to furnish a variety of terminally functionalized alkyl boronates. Several types of migrating variations of heteronuclei radicals and dearomatization processes are also tolerated, allowing for further elaboration of highly functionalized boron-containing frameworks.

A photocatalyzed 1,3-boron shift of allylboronic esters is reported. The atom-switch acrobatics proceeds via cascade 1,2-boron migrations and Smiles type rearrangement to furnish a variety of terminally functionalized alkyl boronates.     

Rapid access to t-butylalkylated olefins enabled by Ni-catalyzed intermolecular regio- and trans-selective cross-electrophile t-butylalkylation of alkynes

Among the carbo-difunctionalization of alkynes, the stereoselective dialkylation of alkynes is the most challenging transformation due to associated competitive side reactions and thus remains underdeveloped. Herein, we report the first Ni-catalyzed regio- and trans-selective cross-dialkylation of alkynes with two distinct alkyl bromides to afford olefins with two aliphatic substituents. The reductive conditions circumvent the use of organometallic reagents, enabling the cross-dialkylation process to occur at room temperature from two different alkyl bromides. This operationally simple protocol provides a straightforward and practical access to a wide range of stereodefined dialkylated olefins with broad functional group tolerance from easily available starting materials.

A direct reductive cross-dialkylation of alkynes is achieved to afford trans-dialkylated olefins using two distinct alkyl bromides. The reaction undergoes with exclusive chemo-, regio- and stereoselectivity without the use of organometallic reagents.     

Glycosylidene Carbenes. Part 10. Regioselective Glycosidation of 4,6-O-Benzylidene-D-altropyranosides

Glycosidation by the diazirine 1 , the trichloroacetimidate 4 , and the bromide 5 of the altro-diol 2 , possessing an intramolecular H-bond (HO? C(3) to O? C(1)) in solution, but not in the solid state, proceeds with high and complementary regioselectivity. From 2 and 1 , one obtains mostly the 1,2-linked disaccharides 10 and 11 (β-D > α-D ), together with the 1,3-linked isomers 12 and 13 (α-D > β-D ; 1,2-/1,3-linked products ca. 9:1), the demethylated 1,3-linked disaccharides 24–27 , the trisaccharides 19–22 , the lactone azines 23 , and the hydroxyglucal 18 , while 2 reacted with 4 or 5 to yield mostly the 1,3-linked disaccharides (1,2-/1,3-linked products ca. 1:9). The disaccharides were additionally characterized as acetates (→ 14–17, 28–31 ). Yields and stereoselectivity depended upon the donor, stoichiometry, solvent, temperature, and concentration. Glycosidation of the 1,3-linked disaccharides with 1 yielded the trisaccharides 19–22 . Reaction of the β-D -altro-diol 3 with 1 gave the 1,2- and 1,3-linked disaccharides 32/33 and 34/35 in a 1:1 ratio, characterized as the acetates 36–39 , while glycosidation with 5 according to Lemieux proceeded regioselectively (1,2-/1,3-linked products 91:9). The monotosylates 6 and 7 reacted with 1 to yield the anomeric pairs 40/41 , and 42/43 of the tosylated disaccharides; the oxiranes 44 and 45 were not observed.     

A pyrone remodeling strategy to access diverse heterocycles: application to the synthesis of fascaplysin natural products

The synthesis of diverse N-fused heterocycles, including the pyrido[1,2-a]indole scaffold, using an efficient pyrone remodeling strategy is described. The pyrido[1,2-a]indole core was demonstrated to be a versatile scaffold that can be site-selectively functionalized. The utility of this novel annulation strategy was showcased in a concise formal synthesis of three fascaplysin congeners.

The synthesis of diverse N-fused heterocycles, including the pyrido[1,2-a]indole scaffold, using an efficient pyrone remodeling strategy is described.     

The convergent total synthesis and antibacterial profile of the natural product streptothricin F

A convergent, diversity-enabling total synthesis of the natural product streptothricin F has been achieved. Herein, we describe the potent antimicrobial activity of streptothricin F and highlight the importance of a total synthesis that allows for the installation of practical divergent steps for medicinal chemistry exploits. Key features of our synthesis include a Burgess reagent-mediated 1,2-anti-diamine installation, diastereoselective azidation of a lactam enolate, and a mercury(ii) chloride-mediated desulfurization-guanidination. The development of this chemistry enables the synthesis and structure–activity studies of streptothricin F analogs.

The second ever total synthesis of streptothricin F and the first achieved through a diversity-enabling convergent route. The synthesis is achieved in 35 total steps, with a longest linear sequence of 19 steps, and 0.40% overall yield.