Real‐Time Scanning Force Microscopy of Macromolecular Conformational Transitions

Summary: Comb‐like macromolecules were adsorbed on mica and imaged by scanning force microscopy in real time as they underwent a transition from an extended worm‐like conformation to globuli and vice versa. The conformational transition was effected by coadsorption of ethanol and water molecules. Coadsorption of the small molecules allowed manipulation of the adherence and spreading of the macromolecules, thus effecting the reptation like stretching and collapse of the single molecules.

SFM images of three individual PMA‐g‐PnBuA brush molecules on mica 27 min (left, first collapse cycle) and 18 min (right, second collapse cycle) after injection of ethanol into the sample space.     

Vapor‐induced spreading dynamics of adsorbed linear and brush‐like macromolecules as observed by environmental SFM: Polymer chain statistics and scaling exponents

Scaling exponents ν, that describe the correlation between mean square end‐to‐end distances and contour lengths of macromolecules, were determined by statistical analysis of scanning force micrographs of single linear poly(2‐vinylpyridine) and brush‐like poly(butanoate‐ethyl methacrylate)‐graft‐poly(n‐butyl acrylate) macromolecules adsorbed on mica. Using an atmosphere‐controlled scanning force microscope, single adsorbed molecules were collapsed and re‐expanded upon being exposed to alcohol and water vapor, respectively. This manipulated collapse‐unfolding was used to equilibrate the molecular structure/conformation. The in situ and real‐time scanning force microscopy analysis allows the scientist to quantitatively characterize end‐to‐end distances and contour lengths of the molecules directly on the image and to observe differences in the spreading dynamics for the two types of macromolecules. A distinct difference has been observed between the expanded two‐dimensional (2D) conformations of linear and brush‐like polymer chains. Whereas a scaling exponent ν of 0.73 was found for the expanded 2D conformation of the linear molecules, a ν‐value of 0.53 was determined for the expanded 2D conformation of the seemingly stiffer brush‐like molecules. A theoretical explanation of the differences between the 2D conformations of brush‐like and linear macromolecules is proposed here. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2368–2379, 2007     

Chitosan Macromolecules on a Substrate: Deposition from Solutions in sc CO2 and Reorganisation in Vapours

Specially pretreated chitosan macromolecules possess limited solubility in supercritical carbon dioxide. When deposited on mica substrate from such solutions they adopt somewhat extended conformation. The adsorbed macromolecules become mobile on the interface when exposed to water vapour as revealed by environmental scanning force microscopy. During the exposure in the presence of coadsorbed water layer the chitosan strands demonstrate slight tendency to adopt more compact but still two-dimensional conformation on the substrate.     

Real-Time Imaging of the Coil-Globule Transition of Single Adsorbed Poly(2-vinylpyridine) Molecules

Summary: We applied scanning force microscopy to study, in real time, the mobility and reorganisation of single poly(2-vinylpyridine) molecules that were adsorbed on mica and exposed to vapours of ethanol or water. The macromolecules adopted a compact globular conformation in ethanol-saturated vapour and extended to a surface-bound two-dimensional coil in water-saturated vapour. Hence, reversible coil-to-globule conformational transitions of flexible polymer chains were directly visualized with unique molecular resolution.

Left: individual P2VP molecules on mica compacted by exposure to ethanol vapour, right: the same macromolecules extended in water vapour.     

Single—Molecular Imaging of Anticoagulation Factor I From Snake Venom by Atomic Force Microscopy

ＡｎｔｉｃｏａｇｕｌａｔｉｏｎｆａｃｔｏｒＩ (ＡＣＦＩ)ｆｒｏｍｔｈｅｖｅｎｏｍｏｆＡｇｋｉ ｓｔｒｏｄｏｎａｃｕｔｕｓｉｓａｂｉｎｄｉｎｇｐｒｏｔｅｉｎｔｏａｃｔｉｖａｔｅｄｃｏａｇｕｌａｔｉｏｎｆａｃ ｔｏｒＸ (ＦＸａ)ａｎｄｐｏｓｓｅｓｓｅｓｍａｒｋｅｄａｎｔｉｃｏａｇｕｌａｎｔａｃｔｉｖｉｔｙ .Ｓｉｎ ｇｌｅＡＣＦＩｍｏｌｅｃｕｌｅｈａｓｂｅｅｎｓｕｃｃｅｓｓｆｕｌｌｙｉｍａｇｅｄｉｎａｉｒｂｙｔａｐ ｐｉｎｇｍｏｄｅａｔｏｍｉｃｆｏｒｃｅｍｉｃｒｏｓｃｏｐｙ (ＡＦＭ )ｗｉｔｈｈｉｇｈ ｒｅｓ…     

基于原子力显微镜的高分子单分子力学研究

原子力显微镜(AFM)从根本上改变了人们对单个原子和分子的作用和认识方式。单分子力谱是基于原子力显微镜力的测量方法。概速了近年来利用基于原子力显微镜的单分子力谱研究单个高分子分子内及分子闻作用力的进展。     

TMDSC and Atomic Force Microscopy Studies of Morphology and Recrystallization in Polyesters Including Oriented Films

The thermal and crystal morphological properties of poly[ethylene teraphthalate] (PET) and poly(ethylene-2,6-naphthalenedicarboxylate) (PEN) biaxially oriented films were compared to amorphous and other isotropic semi-crystalline samples. Crystal melting as a function of temperature was characterized by temperature modulated DSC (TMDSC) and found to begin just above the glass transition for both oriented films. About 75°C above the glass transitions, substantial exothermic recrystallization begins and continues through the final melting region in oriented films. The maximum in the non-reversing TMDSC signal for the oriented films signifies the maximum recrystallization exothermic activity with peaks at 248°C and 258°C for PET and PEN, respectively. The final melting endotherm detected was 260°C and 270°C for PET and PEN, and is shown by the TMDSC data and by independent rapid heating rate melting point determinations to be due to the melting of species recrystallized during the heating scan. The results are compared with TMDSC data for initially amorphous and melt crystallized samples. The volume fraction of rigid species (F_rigid=total crystal fraction plus rigid amorphous or non-crystalline species) were measured by TMDSC glass transition data, and contrasted with the area fraction of rigid species at the oriented film surface characterized with very high resolution atomic force microscopy (AFM) phase data. The data suggest that the 11 nm wide hard domains in PET, and 21 nm wide domains in PEN film detected by AFM consist of both crystal and high stiffness interphase species.This revised version was published online in November 2005 with corrections to the Cover Date.     

Force Spectroscopy of Individual Stimulus‐Responsive Poly(ferrocenyldimethylsilane) Chains: Towards a Redox‐Driven Macromolecular Motor

Summary: Progress in the development of a redox‐driven macromolecular motor and the characterization of its redox‐mechanical cycle using electrochemical AFM‐based single‐molecule force spectroscopy (SMFS) is described. The elasticities of individual neutral and oxidized poly(ferrocenyldimethylsilane) (PFS) macromolecules were reversibly controlled in situ by adjusting the potential in electrochemical SMFS experiments. For the operating cycle of one individual PFS‐based molecular motor, an output of 3.4 × 10⁻¹⁹ J and an efficiency of 5% have been estimated.

Force‐extension curves of a single‐molecule motor.     

Electrostatically Self-Assembled Multilayers of Chitosan and Xanthan Studied by Atomic Force Microscopy and Micro-Interferometry

The thickness and surface morphology of electrostatically self-assembled films of chitosan and xanthan (persistence length of ∼120nm) have been studied using dual-wavelength Reflection Interference Contrast Microscopy (DW-RICM) and tapping mode Atomic Force Microscopy (AFM). The multilayers were prepared at two ionic strengths (5mM and 150mM). When the multilayers were assembled at 150 mM a network like morphology was observed after one bilayer. This structure was found to be of large influence in the further growth of the multilayers, with the same kind of network structure being observed at all number of bilayers. A lack of swelling behaviour, as well as the network structure and the poresize of the network, is suggested to originate from the high chain stiffness of xanthan.     

基于原子力显微镜的单分子力谱在生物研究中的应用

原子力显微镜被广泛应用于生物研究领域,基于原子力显微镜的单分子力谱可以在单分子、单细胞水平上研究生物分子内和分子间的相互作用。 本文介绍了原子力显微镜单分子力谱在生物分子间相互作用、蛋白质去折叠、细胞表面生物分子、细胞力学性质和基于单分子力谱成像等研究中的最新进展。     

Interaction Forces Between Graphitic Carbon Black Surfaces Coated with Polymers Using Atomic Force Microscopy

Carbon black dispersions are stabilized using polymeric dispersants. The stabilization is provided by adsorbed polymer layers around surfaces through interaction forces. Therefore, it is valuable to measure the interaction forces between bare and polymer-coated surfaces using atomic force microscopy to predict the behavior of dispersions. Three polymeric dispersants (Hypermer LP1, Hypermer B246, and OLOA 11000) are used in the present work to disperse the graphitic carbon black particles in an organic solvent, decaline. Hypermer B246 and OLOA 11000 produced repulsive interactions and, hence, are effective stabilizers for carbon black surfaces. Hypermer LP1 produced attractive interactions, making it an ineffective stabilizer for carbon black. Attractive interactions were also observed in blank dispersions. The experimentally determined interaction curves are compared with theoretical curves, the Derjaguin approximation. The repulsive steric interactions are also analyzed quantitatively based on the Alexander and de Gennes scaling law.     

微电极上单核沉积的现场电化学原子力显微镜研究

用现场电化学原子力显微镜（ＥＣＡＦＭ）观察玻碳微电极上银单核电化学成核与生长的不同阶段的行为,结果表明银单核在玻碳边缘生成以（１００）面择优的晶粒,证实了成核过程强烈地信赖于玻碳棋底的状态,有成核历史的基底沉积多核,经特殊方法“清洗”的基底沉积单核,本工作首次把ＥＣＡＦＭ应用于微电极系统的研究,对微是极上的单核生长进行实时观察;同非现场测量进行比较,演示一种轩单晶微电极的可行方法。     

Atomic Force Microscopy Studies of SnO2 Thin Film Microstruc tures Deposited by Atomic Layer Epitaxy

 ALE-grown, rutile-type SnO₂ thin films and gas sensor structures based thereupon were studied by AFM with main emphasis on cross-sectional investigations (X-AFM). On glass substrates the polycrystalline films showed a preferred orientation which depended on the film thickness and growth temperature while on single crystal sapphire () the growth was heteroepitaxial. For the X-AFM studies various sample preparation techniques were investigated but only ion beam etching gave satisfactory results and revealed substructures in the sensor structure consisting of Pt and SnO₂ layers on a silicon substrate.     

原子力显微镜在多糖结构研究中的进展

简述了原子力显微镜(AFM)的工作原理和特点,以及在多糖,特别是在淀粉结构研究中的进展。     

Atomic Force Microscopy Characterization and Interpretation of Thin‐Film Poly(butylene adipate) Spherulites with Ring Bands

Atomic force microscopy characterization has been conducted to reveal the morphological difference between single‐ring bands in poly(butylene adipate) (PBA). Furthermore, morphological features of the ring‐less Maltese‐cross spherulites are compared to the ring‐band spherulites. Periodic changes in height seem to be common for either the ring‐band or ring‐less (Maltese‐cross) crystal domains; however, the steepness in height change is greater for the ring‐band crystal, while height change in the ring‐less crystal exhibits a terrace‐like layer pattern. In the ring‐band crystal region, the lamellar stalks, which taper off to pointed needle‐like stalks, monotonously protrude out of the layers of softer materials, with no signs of twisting, bending, or turning. In contrast, all lamellae in the ring‐less (Maltese‐cross) crystal region are uniform platelets arranged like flower petals in a layered pattern.

     

qPlus型非接触原子力显微技术进展及前沿应用

原子力显微镜(AFM)通过探测针尖与样品之间的相互作用力获得样品表面的结构信息。基于qPlus传感器的非接触原子力显微镜(NC-AFM)在传统AFM的基础上进一步提升了空间分辨率,为研究表面物理和化学过程提供了一种新的成像和谱学研究技术。本文首先介绍NC-AFM的基本构造、高分辨成像机制和力谱测量等工作原理,总结了近年来NC-AFM在表面在位化学反应、低维材料表征和表面电荷分布测量等方面的应用,探讨了NC-AFM技术的发展与完善,展望了NC-AFM面临的机遇和挑战。     

Analogy in adsorption behavior of homopolyelectrolyte mixtures as compared to analogous diblock polyampholytes

The adsorption behavior of aqueous mixtures of the homopolyelectrolytes poly(methacrylic acid) (PMAA) and poly[(dimethylamino)ethyl methacrylate] (PDMAEMA) was investigated in comparison with the adsorption of the ampholytic diblock copolymer PMAA‐b‐PDMAEMA on silicon substrates. Ellipsometry was used to determine the amount of adsorbed homopolyelectrolyte and diblock polyampholyte. Furthermore, the topography of the adsorbed polymers was investigated with atomic force microscopy (AFM) and compared with the structures observed in aqueous solutions by dynamic light scattering (DLS). For all types of investigated polyelectrolytic mixtures or the single polyampholyte, the adsorption was strongly influenced by the pH of the polymer solution. Although single homopolyelectrolytes showed only one maximum in adsorption according to their charge, the mixtures made from these homopolyelectrolytes showed two or three maxima. The third maximum near the isoelectric point of the mixture was assigned to a new species formed by aggregation of the two homopolyelectrolytes. Altogether, the adsorption behavior of the polyelectrolytic mixtures was in between the behavior of the pure homopolyelectrolytes and the analogous polyampholytes and therefore understandable from both of these polymer species. © 2002 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 338–345, 2002; DOI 10.1002/polb.10091     

Molecular Bottle Brushes with Positioned Selenols: Extending the Toolbox of Oxidative Single Polymer Chain Folding with Conformation Analysis by Atomic Force Microscopy

A synthesis route to controlled and dynamic single polymer chain folding is reported. Sequence-controlled macromolecules containing precisely located selenol moieties within a polymer chain are synthesized. Oxidation of selenol functionalities lead to diselenide bridges and induces controlled intramolecular crosslinking to generate single chain collapse. The cyclization process is successfully characterized by SEC as well as by ¹H NMR and 2D HSQC NMR spectroscopies. In order to gain insight on the molecular level to reveal the degree of structural control, the folded polymers are transformed into folded molecular brushes that are known to be visualizable as single molecule structures by AFM. The “grafting onto” approach is performed by using triazolinedione−diene reaction to graft the side chain polymers. A series of folded molecular brushes as well as the corresponding linear controls are synthesized. AFM visualization is proving the cyclization of the folded backbone by showing globular objects, where non-folded brushes show typical worm-like structures. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 154–162     

Structure of salted and discharged globules of hydrophobic polyelectrolytes adsorbed from aqueous solutions

In this article, we compare structures of protonated poly(2-vinylpyridine) globules (2D compact coils on the surface) adsorbed on the mica surface from aqueous solution when the shrinking is brought about either by discharging the molecules at an elevated pH or by adding monovalent and polyvalent salts. We study the structure of the PE coils using in situ atomic force microscopy experiments in aqueous solutions in a liquid cell. The abrupt coil-to-globule transition caused by pH changes and the discharge of polymer chains resulted in compact globules. If the pH corresponding to extended coil conformation remains unchanged, the coil shrinks due to the added salt. The size of the globule in the latter case corresponds to the unperturbed dimension of the polymer coil. There is no essential difference in the dimensions of the globules as obtained in the presence of monovalent and multivalent counterions for the studied ionic strength. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1623–1627, 2010