The synthesis of cationic mono‐(6‐O‐(1‐vinylimidazolium))‐ß‐cyclodextrin with toluenesulfonate as the corresponding anion is described. Free‐radical copolymerization of the resulting host–guest complex with N‐isopropylacrylamide or N,N‐diethylacrylamide yielded copolymers showing a temperature‐controlled solubility window in water. The impact of different anionic guests and salt concentrations on solubility behavior was investigated via turbidity measurements.
Large scale of well‐ordered macroporous π‐conjugated polymer monoliths have been successfully prepared through a new approach using micrometer‐sized naphthalene crystals as templates. The macroporous monoliths of poly(p‐phenylenevinylene) (PPV) and poly(p‐phenyleneethynylene) (PPE) grew along the unidirectional freezing direction inside the template naphthalene crystals which lead to the formation of controlling morphologies and homogeneous diameters. The polymer monoliths show straight and lamella macroporous structures. The diameters of pores and the thickness of pore walls can be controlled by tuning the freezing temperature.
A direct access to photochromic polymeric vesicles was demonstrated via polymerization‐induced self‐assembly and reorganization (PISR). The resulting vesicles displayed interesting photochromic behaviors different from that of their free polymer chains in DMF, and the vesicles exhibited stronger fluorescence and excellent photostability due to confinement of conformational flexibility of the polymer chains in aggregates.
Some new water‐soluble bis‐porphyrins, constituted of two porphyrin units spaced by means of aliphatic bridges of different lengths, were synthesized and characterized by MALDI‐TOF mass spectrometry, 1H NMR and UV‐vis spectroscopy. The hydrosolubility of these uncharged compounds was guaranteed from the presence of six long PEG chains bound on the peripheral positions of the two porphyrins. Cobalt and zinc derivatives were also prepared. In the case of Co‐bis‐porphyrin, the appearance of induced circular dichroism (ICD) signals in water solution confirmed the formation of stable complexes with some amino acids, in which the bis‐porphyrin behaves like molecular tweezers.
We describe the fabrication of a biomimically designed superhydrophobic poly(ε‐caprolactone) surface, which was obtained using a modified electrostatic process. The fabricated surface exhibits a micron‐sized pyramid structure consisting of accumulated droplets and nanofibres. By using this simple one‐step process, we can achieve a superhydrophobic surface having both a high water contact angle and low threshold sliding angle, similar to that of the superhydrophobic plant leaf.
Summary: The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles was performed in situ by the ring‐opening polymerization of the oxirane monomer initiated from the mineral surface using aluminium isopropoxide as an initiator/heterogeneous catalyst. Alcohol groups were first introduced onto silica by reacting the surfacic silanols with prehydrolyzed 3‐glycidoxypropyl trimethoxysilane. The alcohol‐grafted silica played the role of a coinitiator/chain‐transfer agent in the polymerization reaction and enabled the formation of irreversibly bonded polymer chains. Silica nanoparticles containing up to 40 wt.‐% of a hairy layer of grafted PEO chains were successfully produced by this technique.
The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles by in‐situ ring‐opening polymerization of the oxirane monomer. 相似文献
Summary: In this paper, unsaturated groups were introduced into poly(lactic acid) (PLA) for fabricating PLA‐based nanospheres with carbon‐carbon double bonds as functional groups. The morphology dependencies on fabrication conditions, including the fabrication time as well as the stirring rate, were also investigated.
SEM‐EDX image of poly(lactic acid) diacrylate nanospheres after exposure to osmium tetroxide vapor for 14 h. 相似文献
The mechanistic interpretation of kinetic anomalies in reversible addition–fragmentation chain transfer (RAFT)‐mediated polymerization is critically reviewed. The main conclusion of this exercise is that available data do not allow model discrimination between the two prevailing mechanistic schemes, i.e., the slow fragmentation model and the intermediate radical termination model. However, assessment of the rate parameters reveals that the incompatibilities may not be as large as previously reported in literature. Dedicated kinetic studies on model compounds should be performed to shed further light on the seemingly incompatible data that currently exists in literature.
Summary: Uniform one‐dimensional (1D) structures of o‐phenylenediamine (oPD) oligomers are obtained by direct mix of AgNO3 and oPD aqueous solutions at room temperature. The formation of the 1D structures involves two stages: (1) oxidation of oPD by AgNO3, yielding individual oPD oligomers; and (2) self‐assembly of the oligomers, forming the 1D structures. Upon decreasing medium pH, the 1D structures can break‐apart to form individual oligomers, or vice versa. It is also found that both the concentration and molar ratio of reactants can influence the morphology of the structures thus formed.
Schematic illustration of the formation mechanism of 1D structures from oPD and AgNO3, and energy‐dispersed spectrum of the precipitate. 相似文献
The effects of temperature and solvent on the β‐phase formation and energy transfer in an Ir(III) complex‐containing polyfluorene were investigated. Efficient energy transfer from polyfluorenes host to Ir complexes guest can be realized at low temperature. The formation of β‐phase was observed both in THF solution at low temperature and as suspended nano‐particles at room temperature. In addition, phosphorescent polymer nanoparticles were prepared successfully and exhibited efficient phosphorescent emission.
Amphiphilic hybrid π‐conjugated polymers that have polyhedral oligomeric silsesquioxanes on their side chains have been successfully synthesized by the Sonogashira–Hagihara polycondensation reaction. The obtained polymers were studied with ultraviolet‐visible absorption and photoluminescence spectra. In these polymers, the π‐conjugation length was extended along the poly(p‐phenylene‐ethynylene) backbone. Furthermore, the content of the POSS substituents can influence the aggregation behavior of the polymers and subsequent luminescent properties.
A compositional graded film of poly(ε‐caprolactone) (PCL) with 4,4′‐thiodiphenol (TDP), in the film thickness direction, was fabricated by self‐diffusing of TDP in the PCL melt. We found out the self‐bending deformation of the gradient film, which bent into a rolled‐up shape by itself. The initial shape of the film was flat when the sample was quenched from the melt. Upon the fast crystallization of PCL, the gradient film bent to the side with low TDP content. Then, after PCL crystallized the film bent to the opposite direction, that is, to the side with high TDP content. This bending to the TDP rich region was induced by not only the crystallization of PCL but also mass transfer due to the diffusion of TDP from TDP rich region to poor region.
A novel pH‐switchable macroscopic assembly is reported using alginate‐based hydrogels functionalized with host (α‐cyclodextrin, αCD) and guest (diethylenetriamine, DETA) moieties. Since the interaction of αCD and DETA is pH sensitive, the host hydrogel and guest hydrogel could adhere together when the pH is 11.5 and separate when the pH is 7.0. Furthermore, this pH‐controlled adhesion and dissociation shows a good reversibility. The host and guest polymers have good biocompatibility; therefore, this pH‐sensitive macroscopic assembly shows great potential in biotechnological and biomedical applications.
Summary: A series of 7 homogeneous ethylene‐propylene copolymers is modeled by a Bernoullian, a terminal, a penultimate and a third order Markov model and it is found that the penultimate model describes this series best. The Bernoullian and terminal model prove to be insufficient and the third order Markov model is statistically not justified. Based on these results, a criterion to select the optimal Markovian order of homogeneous, single site catalyst produced copolymers is developed.
Schematic of the [(3‐MePh)(4‐MePh)C(2,7‐di‐tert‐BuFlu)(Cp)]ZrCl2 metallocene copolymerizing ethene and propene. 相似文献
The catalytic properties of bis(phenoxy‐imine) Zr and Hf complexes incorporating perfluorophenyl groups with methylaluminoxane were investigated. The fluorinated complexes produced far higher‐molecular‐weight polyethylenes and ethylene/propylene copolymers with increased activities compared with the non‐fluorinated congeners. Moreover, the fluorinated complexes displayed a higher incorporation ability for propylene.
The preparation of associative networks containing multi‐walled carbon nanotubes (MWCNTs) with covalently attached cyclodextrin (CD) rings and poly[(isobutylene)‐co‐(maleic anhydride)‐co‐(maleic acid‐(4‐tert‐butylphenyl)amide)] in water is described in this study. The synthesis of CD containing MWCNTs is realized by an amidation reaction of oxidized MWCNTs with propargylamine followed by a 1,3‐dipolar cycloaddition with CD‐azide. Dispersion behavior indicated the high stability of these networks. An increase in viscosity compared to a solution of pure polymer as a cause of network formation is observed. The addition of a CD‐decomposing enzyme (taka‐diastase from Aspergillus oryzae) let the network collapse and results in sedimentation of the modified MWCNTs.
A reverse‐barrier technique is used to enable the treatment of electrospun poly(vinylidene fluoride) nanofibrous membranes with supercritical carbon dioxide. The treatment induces the formation of nanopores and extended‐chain β crystallites of small lateral dimensions in the nanofibers. It also creates interfiber junctions, resulting in a remarkable improvement in mechanical properties of the membranes. The treated membranes are able to retain their shape very well after loading with an ionic liquid (IL). The ionic conductivity of the IL‐loaded membrane is very close to that of the neat IL.
