Incorporating glycidyl methacrylate into block copolymers using poly(methacrylate‐ran‐styrene) macroinitiators synthesized by nitroxide‐mediated polymerization

Methyl methacrylate/styrene (MMA/S), ethyl methacrylate/styrene (EMA/S) and butyl methacrylate/styrene (BMA/S) feeds (>90 mol % methacrylate) were copolymerized in 50 wt % p‐xylene at 90 °C with 10 mol % of additional SG1‐free nitroxide mediator relative to unimolecular initiator (BlocBuilder^®) to yield methacrylate rich copolymers with polydispersities _w/ _n = 1.23–1.46. k_pK values (k_p = propagation rate constant, K = equilibrium constant) for MMA/S copolymerizations were comparable with previous literature, whereas EMA/S and BMA/S copolymerizations were characterized by slightly higher k_pK's. Chain extensions with styrene at 110 °C initiated by the methacrylate‐rich macroinitiators (number average molecular weight _n = 12.9–33.5 kg mol^?1) resulted in slightly broader molecular weight distributions with _w/ _n = 1.24–1.86 and were often bimodal. Chain extensions with glycidyl methacrylate/styrene/methacrylate (GMA/S/XMA where XMA = MMA, EMA or BMA) mixtures at 90 °C using the same macroinitiators resulted frequently in bimodal molecular weight distributions with many inactive macroinitiators and higher _w/ _n = 2.01–2.48. P(XMA/S) macroinitiators ( _n = 4.9–8.9 kg mol^?1), polymerized to low conversion and purified to remove “dead” chains, initiated chain extensions with GMA/MMA/S and GMA/EMA/S giving products with _w/ _n ～ 1.5 and much fewer unreacted macroinitiators (<5%), whereas the GMA/BMA/S chain extension was characterized by slightly more unreacted macroinitiators (～20%). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2574–2588, 2009     

A Helical Poly(macromonomer) Consisting of a Polyacetylene Main Chain and Polystyrene Side Chains

A novel helical poly(macromonomer) [poly(M‐PS): absolute = 82 800–252 000, determined by GPC/RALLS] with a polyacetylene main chain and polystyrene (PS) side chains was synthesized by the polymerization of acetylene‐terminated M‐PS [ = 2 000, / = 1.20, = 18] with an Rh catalyst. M‐PS was prepared by ATRP of styrene using the acetylene‐containing initiator 2‐bromo‐2‐methylpropionic acid (S)‐1‐methylpropargyl ester ( l ). In solutions, poly(M‐PS) exhibited an intense CD signal at 345–355 nm, indicating that it possessed a predominantly one‐handed helical conformation. Poly(M‐PS) had a stable helical conformation irrespective of solvents and temperature.

     

Direct Cyclodextrin‐Mediated Ring Opening Polymerization of ϵ‐Caprolactone in the Presence of Yttrium Trisphenolate Catalyst

Unmodified β‐cyclodextrin has been directly used to initiate ring‐opening polymerization of ϵ‐caprolactone in the presence of yttrium trisphenolate. Well‐defined cyclodextrin (CD)‐centered star‐shaped poly(ϵ‐caprolactone)s have been successfully synthesized containing definite average numbers of arms (N_arm = 4–6) and narrow polydispersity indexes (below 1.10). The number‐average molecular weight ( ) and average molecular weight per arm ( ) are controlled by the feeding molar ratio of monomer to initiator. The prepared star‐PCL with of 2.7 × 10³ is in fully amorphous and that with of 13.3 × 10³ is crystallized. In addition, the obtained poly(e‐caprolactone) (PCL) stars with various molecular weights have different solubilities in methanol and tetrahydrofuran, which can be applied for further modifications.     

A Facile Two‐Step Route to Branched Polyisoprenes via ABn‐Macromonomers

A facile two‐step synthesis for branched poly(isoprene)s (PI) based on polyaddition of AB_n‐type macromonomers is described. The synthesis of the macromonomers was achieved by anionic polymerization of isoprene and subsequent end‐capping of the polymers by addition of chlorodimethylsilane to the living carbanions. This led to PI‐based macromonomers with narrow polydispersity ( / < 1.15) and molecular weights in the range of 1 700 – 22 100 g · mol⁻¹. Synthesis of the branched polymers was carried out by a hydrosilylation‐based polymerization of the macromonomers. Characterization via SEC, SEC‐MALLS, coupled SEC‐viscosimetry and ¹H‐NMR‐spectroscopy supported the formation of branched structures. Interestingly, these branched polymers exhibited α‐values that were similar to those reported for hyperbranched polymers based on AB₂‐monomers.

     

Critical Evaluation of the Microwave Effect on Radical (Co)Polymerizations

Critical evaluations of the microwave effect on initiation, propagation, and termination during conventional radical polymerizations (RPs) of methyl methacrylate (MMA) and random copolymerization of styrene (St) with (meth)acrylates are examined by comparing microwave heating (MWH) and conventional heating (CH). Poly(methyl methacrylate) with similar , / , and conversion are obtained under precisely controlled temperature, indicating very small changes of propagation rate constant. Rate enhancement in the absence of precise temperature control is mostly due to the higher reaction temperature of the reaction mixture than the apparent value indicated on display. Rates of initiator decomposition under well‐controlled temperature are essentially the same for MWH and CH.     

Film Growth and Surface Roughness with Effective Fluctuating Covalent Bonds in Evaporating Aqueous Solution of Reactive Hydrophobic and Polar Groups: A Computer Simulation Model

Summary: A computer simulation model is proposed to study film growth and surface roughness in aqueous (A) solution of hydrophobic (H) and hydrophilic (P) groups on a simple three dimensional lattice of size with an adsorbing substrate. Each group is represented by a particle with appropriate characteristics occupying a unit cube (i.e., eight sites). The Metropolis algorithm is used to move each particle stochastically. The aqueous constituents are allowed to evaporate while the concentration of H and P is constant. Reactions proceed from the substrate and bonded particles can hop within a fluctuating bond length. The film thickness ( ) and its interface width ( ) are examined for hardcore and interacting particles for a range of temperature ( ). Simulation data show a rapid increase in and followed by its non‐monotonic growth and decay before reaching steady‐state and near equilibrium ( ) in asymptotic time step limit. The growth can be described by power laws, e.g., with a typical value of in initial time regime followed by at . For hardcore system, the equilibrium film thickness ( ) and surface roughness ( ) seem to scale linearly with the temperature, i.e., at low and at higher . For interacting functional groups in contrast, the long time (unsaturated) film thickness and surface roughness, and decay rapidly followed by a slow increase on raising the temperature.

Growth of the average film thickness at a temperature .     

Combining Modular Ligation and Supramolecular Self‐Assembly for the Construction of Star‐Shaped Macromolecules

A well‐defined random copolymer of styrene (S) and chloromethylstyrene (CMS) featuring lateral chlorine moieties with an alkyne terminal group is prepared (P(S‐co‐CMS), = 5500 Da, PDI = 1.13). The chloromethyl groups are converted into Hamilton wedge (HW) entities (P(S‐co‐HWS), = 6200 Da, PDI = 1.13). The P(S‐co‐HWS) polymer is subsequently ligated with tetrakis(4‐azidophenyl)methane to give HW‐functional star‐shaped macromolecules (P(S‐co‐HWS))₄, = 25 100 Da, PDI = 1.08). Supramolecular star‐shaped copolymers are then prepared via self‐assembly between the HW‐functionalized four‐arm star‐shaped macromolecules ( P(S‐co‐HW )) ₄ and cyanuric acid (CA) end‐functionalized PS (PS–CA, = 3700 Da, PDI = 1.04), CA end‐functionalized poly(methyl methacrylate) (PMMA–CA, = 8500 Da, PDI = 1.13) and CA end‐functionalized polyethylene glycol (PEG–CA, = 1700 Da, PDI = 1.05). The self‐assembly is monitored by ¹H NMR spectroscopy and light scattering analyses.     

Determination of thermodynamic properties of macroporous glycidyl methacrylate‐based copolymers by inverse gas chromatography

Macroporous crosslinked poly(glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) (PGME) was synthesized by suspension copolymerization and modified by ring‐opening reaction of the pendant epoxy groups with ethylene diamine (EDA). Inverse gas chromatography (IGC) at infinite dilution was applied to determine the thermodynamic interactions of PGME and modified copolymer, PGME‐en. The specific surface areas of the initial and modified copolymer samples were determined by the BET method, from low‐temperature nitrogen adsorption isotherms. The specific retention volumes, V, of 10 organic compounds of different chemical nature and polarity (nonpolar, donor, or acceptor) were determined in the temperature range 333–413 K. The weight fraction activity coefficients of test sorbates, , and Flory–Huggins interaction parameters, , were calculated and discussed in terms of interactions of sorbates with PGME and PGME‐en. Also, the partial molar free energy, , partial molar heat of mixing, , sorption molar free energy, ΔG, sorption enthalpy ΔH, and sorption entropy, ΔS, were calculated. Glass transitions in PGME and PGME‐en, determined from IGC data, were observed in the temperature range 373–393 K and 363–373 K, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2524–2533, 2005     

Facile Iron‐Mediated AGET ATRP for Water‐Soluble Poly(ethylene glycol) Monomethyl Ether Methacrylate in Water

An environmentally friendly iron catalyst system was successfully developed in water for the AGET ATRP (activator generated by electron transfer for atom transfer radical polymerization) of water‐soluble monomer poly(ethylene glycol) monomethyl ether methacrylate (PEGMA) for the first time. A kinetic study indicated that the polymerization was a living/controlled process in which molecular weight increased linearly with monomer conversion. A lower molecular weight distribution ( / < 1.5) was maintained. The nontoxic and biocompatible characteristics of the iron catalyst facilitate its mediated polymerization to be used in the preparation of functional polymer materials for biomedical use.     

Study on the Indirect Electrochemical Detection of Ammonium Ion with In Situ Electrogenerated Hypobromous Acid

The electrochemical oxidation of bromide in the presence of ammonium ion (NH ) was studied by cyclic voltammetry and UV‐vis spectroscopy. The experimental results suggested that the anodically generated bromine (Br₂) would be hydrolyzed to hypobromous acid (HBrO) at the pH range of 5–7 and was further disproportionate to hypobromite anion (BrO^?) when pH was larger than 7. Both HBrO and BrO^? were confirmed to be participated in the following homogeneous chemical reaction with the coexisted ammonium ion. However, HBrO is electroactive whereas BrO^‐ is electroinactive at carbon electrode. Based upon the reaction of HBrO with NH , an indirect electrochemical method was proposed for determination of NH with dual‐electrode configuration in phosphate buffer solution (pH 7), where HBrO was produced at a generator electrode and the excess HBrO was subsequently detected at a collector electrode after a reaction with NH in a batch solution or in a micro flow injection analytical (micro‐FIA) system by using an interdigitated array (IDA) Pt microelectrode and a carbon film ring‐disk electrode (CFRDE), respectively. The decreasing of reduction current at the collector electrode was proportional to the concentration NH in both systems, with the detection limit below 3.0 μM. This approach shows the advantage of highly selectivity even in presence of a large amount of coexisted cations, and was successfully applied for the determination of NH in environmental water samples.     

AGET ATRP in the Presence of Air in Miniemulsion and in Bulk

Summary: The recently developed initiation system, activators generated by electron transfer (AGET), is used in atom transfer radical polymerization (ATRP) in the presence of a limited amount of air. Ascorbic acid and tin(II ) 2‐ethylhexanoate are used as reducing agents in miniemulsion and bulk, respectively. An excess of reducing agent consumes the oxygen present in the system and, therefore, provides a deoxygenated environment for ATRP. ATRP of butyl acrylate is successfully carried out in miniemulsion and in the presence of air. During polymerization the radical concentration remains constant. The polymerization reaches over 60% monomer conversion after 6 h, which results in polymers with a predetermined molecular weight = 14 000 g · mol⁻¹ and a low polydispersity ( = 1.23). AGET ATRP of styrene is also successful in bulk in the presence of air, as evidenced by linear semi‐logarithmic kinetics, which leads to polystyrene with an of 13 400 g · mol⁻¹ and a low polydispersity index ( = 1.14).

Appearance of miniemulsion before and after the reducing agent ascorbic acid was added (left); and GPC traces representing molecular weights during the AGET ATRP of BA in miniemulsion in the presence of air (right).     

Naked and Self‐Clickable Propargylic‐Decorated Single‐Chain Nanoparticle Precursors via Redox‐Initiated RAFT Polymerization

Protection of acetylenic monomers is a common practice to avoid parasitic side reactions during polymerization. Herein, we report that redox‐initiated RAFT polymerization allows the direct, room temperature synthesis of a variety of single‐chain nanoparticle precursors (displaying narrow molecular weight dispersity, / = 1.12 –1.37 up to = 100 kDa) containing well‐defined amounts of naked, unprotected acetylenic functional groups available for rapid and quantitative intrachain cross‐linking via metal‐catalyzed carbon–carbon coupling (i.e., C–C “click” chemistry). To illustrate the useful “self‐clickable” character of the new unprotected acetylenic precursors, single‐chain nanoparticles have been prepared for the first time in a facile and highly efficient manner by copper‐catalyzed alkyne homocoupling (i.e., Glaser–Hay coupling) at room temperature under normal air atmosphere.     

RAFT Polymerization of Pentafluorophenyl Methacrylate: Preparation of Reactive Linear Diblock Copolymers

Summary: Reversible addition fragmentation chain transfer (RAFT) polymerization of pentafluorophenyl methacrylate (PFMA) was carried out in the presence of cumyldithiobenzoate and 4‐cyano‐4‐((thiobenzoyl)sulfanyl)pentanoic acid, respectively. These chain transfer agents with 2,2′‐azoisobutyronitrile (AIBN) as initiator yielded the active ester polymer poly(PFMA) with up to 17 000 g · mol⁻¹ and low polydispersity index ( < 1.2). Kinetic analysis using ¹⁹F NMR spectroscopy and gel permeation chromatography (GPC) measurements showed controlled polymerization behavior for both chain transfer agents. Successful preparation of linear diblock copolymers consisting of an active ester block and methyl methacrylate, N‐acryloylmorpholine, or N,N‐diethylacrylamide, respectively, could be demonstrated. These polymers could easily react with amines in a polymer analogous reaction to form multifunctional polymers.

     

Narrowly Distributed Dendronized Polymethacrylates by Reversible Addition‐Fragmentation Chain Transfer (RAFT) Polymerization

Summary: RAFT is applied to the dendronized macromonomers of the first and second generation, 1 and 2 , respectively. Good results are obtained in the presence of AIBN as radical initiator, with compound 6 as mediator and at mediator to monomer ratios of 2:200 for monomer 1 ( = 320 000, PDI = 1.24) and monomer 2 ( = 178 000, PDI = 1.20). The common characteristics of a controlled polymerization are reasonably met. The more sterically demanding G2 monomer 2 requires higher polymerization temperatures.

     

Controlled Synthesis of a Chitosan‐Based Graft Copolymer Having Polysarcosine Side Chains Using the NCA Method with a Carboxylic Acid Additive

Summary: A novel chitosan derivative with polysarcosine side chains, i.e., chitosan‐graft‐polysarcosine [chitosan‐graft‐poly(N‐methylglycine)], was synthesized by ring‐opening polymerization of sarcosine N‐carboxyanhydride (NCA) with chitosan as a macroinitiator in the presence of carboxylic acids in dimethyl sulfoxide at 27 °C. Degree of substitution ( ) for polysarcosine side chains introduced to chitosan was controlled successfully by the feed amount of the additive nicotinic acid ( = 0.21–0.71). Independent of control, degree of polymerization ( ) for polysarcosine side chains was controlled by adjusting feed ratios of NCA monomer to chitosan ( = 14–43). Kinetic analysis of the propagation of sarcosine NCA was conducted by measuring CO₂ evolution. Apparent k_p values decreased with increased feed amounts of nicotinic acid, supporting the theory that propagation of NCA in the presence of nicotinic acid proceeds via equilibrium between active amine and dormant ammonium species.

Propagation mechanism of carboxylic acid‐mediated polymerization of sarcosine N‐carboxyanhydride.     

The first normal stress difference and viscosity in shear of liquid crystalline solutions of hydroxypropylcellulose: new experimental data and theory

The constitutive equations for liquid crystalline polymers recently proposed by one of us [1] are applied here to interpret the behaviour of the shear viscosity η and the first normal stress difference N₁() measured for liquid crystalline (LC) solutions of hydroxypropylcellulose in acetic acid. N₁( ) is observed to change from positive to negative and again to positive, as the shear rate increases, at lower concentrations, in the LC phase. The -values at which N₁ changes sign depend on the molecular mass (degree of polymerization) and on the concentration. η shows a small Newtonian plateau at low shear rates and a strong shear-thinning at higher values of . The rate of decrease of η in this region shows an “hesitation” similar to one previously observed in LC solutions of poly-γ-benzyl-L-glutamate PBLG. All these observations can be rationalized within the frame-work of Martins' theory. The expressions for N₁() and η derived from this theory fit very well (quantitatively) to the experimental data and some fundamental viscoelastic parameters of the system under study are thereby obtained for the first time.     

Towards Clathrates: Frozen States of Hydration of tert‐Butylamine

The dilution of tert‐butylamine (tBA) with water and subsequent cooling leads to a large series of different crystalline hydrates by an in situ IR laser melting‐zone procedure. The crystal structures were determined for tBA?n H₂O, with n=0, , 1, 7 , 7 , 9 , 11, and 17. For the two lower hydrates (n= , 1), one‐ and two‐dimensional hydrogen‐bonded networks are formed, respectively. The higher hydrates (n>1) exhibit a clathrate‐like three‐dimensional water framework with the tBA molecules as part of, or sitting inside, the cages. In all cases, tBA is hydrogen‐bonded to the H₂O framework. In the intermediate range (1相似文献   

The Radical Cations and the Radical Anions of Some Weitz-Type S-Donors

The radical cations and the radical anions of 1,6-dithiapyrene ( 1 ) and 3,10-dithiaperylene ( 2 ) as well as those of three further Weitz-type S-donors 3 , 4 , and 5 have been studied by ESR spectroscopy. The experimental findings for (widths and behaviour on saturation of hyperfine lines) suggest that the ground state of this radical anion is effectively degenerate. With the exception of , the ESR studies of all radical ions could be complemented by the use of the ENDOR and general TRIPLE resonance techniques. In addition to proton hyperfine data, ³³S coupling constants have been determined for (0.53mT), (0.46mT), and (0.34mT); they are in agreement with the predicted substantial π-spin populations at the S-atoms.     

Cationic Graft Copolymers as Carriers for Delivery of Antisense‐Oligonucleotides

Self‐assembling systems based on ionic complexes of DNA fragments (36 base pairs), bcl‐2 antisense oligonucleotides (octadecamer), oligophosphates (25 phosphate groups) or acrylic oligomers (18 groups of phosphonic acid) with poly(L ‐lysine) (PLL) ( = 130 000 and 88 000) grafted with short poly[N‐(2‐hydroxypropyl)methacrylamide] (PHPMA) chains ( = 4 300 or 8 600) were studied by static and dynamic light scattering methods as systems suitable for gene therapy applications. The graft copolymers (GPLLs) with shorter PHPMA grafts ( = 4 300) provide polyelectrolyte complexes (PECs) with smaller and R_H than the corresponding GPLLs with longer grafts ( = 8 600) and the same content of PLL. The lowest aggregation number of 2 was observed for PECs prepared from the GPLL with short grafts and 40 wt.‐% of PLL. The complexes of oligonucleotides and DNA fragments with GPLLs showed quite similar behavior to that with oligophosphates and acrylic oligomer. The complexes prepared from GPLLs containing 40 wt.‐% of PLL and at excess of oligophosphate were stable for at least 48 h under physiological conditions (0.15 M NaCl) and in bovine serum albumin solutions (1 mg · mL^?1). Additionally, polyanion exchange reactions of the PECs in contact with poly(styrenesulfonate) and DNA were studied in 0.15 M NaCl solutions. The oligophosphates in complexes were at least partially substituted with high‐molecular‐weight polyanions. The structure of the initial PECs dominated the PEC structure after the exchange reaction.

The dependence of the molecular weight (a) and the hydrodynamic radius R_H (b) of complexes of the oligophosphate (OPP) and four graft copolymers (GPLLi, i = 0–3) on the mixing ratio X.     

One‐Step Pyrolysis Preparation of 1.1.1 Oriented Gold Nanoplatelets Supported on Graphene and Six Orders of Magnitude Enhancement of the Resulting Catalytic Activity

Pyrolysis of chitosan films containing Au³⁺ renders 1.1.1 oriented Au nanoplatelets (20 nm lateral size, 3–4 nm height) on a few layers of N‐doped graphene ( /fl‐G), while the lateral sides were 0.0.1 oriented. Comparison of the catalytic activity of /fl‐G films with powders of unoriented Au NPs supported on graphene showed that /fl‐G films exhibit six orders of magnitude enhancement for three gold‐catalyzed reactions, namely, Ullmann‐like homocoupling, C? N cross coupling, and the oxidative coupling of benzene to benzoic acid. This enhancement is the result of the defined morphology, facet orientation of Au nanocrystals, and strong gold‐graphene interaction.