The importance of taking into account the principle of microscopic reversibility in the analysis of complex copolymerization systems is demonstrated. The analysis of a reversible copolymerization system in which segmental exchange is possible from the point of view of the reaction microreversibility proves that hetero‐reshuffling rate constants depend on homo‐reshuffling rate constants and copolymerization thermodynamics.
A novel approach is employed to produce core–corona nanospheres, which introduces a stereoregular hydrophilic part to an amphiphilic block copolymer. The resultant morphology is reported using isotactic‐poly(methacrylic acid)‐block‐poly(butyl acrylate). Infrared spectroscopy revealed a supramolecular interaction, and X ray diffraction revealed the crystallization of the outer isotactic‐poly(methacrylic acid) part. The nanostructure, which looks like a nanosized ‘grape’, was formed when nanospheres and nanofibers coexisted simultaneously and partially fused.
Summary: The synthesis of magnetic magnetite nanoparticles coated with amphiphilic block copolymers of poly(ethyl methacrylate)‐block‐poly(2‐hydroxyethyl methacrylate) for use as new potential carriers for hydrophobic drug delivery is reported. The results show that a new core‐shell‐corona structural material is obtained with a very narrow molecular weight distribution of the hydrophobic segment (PDI = 1.10). UV‐Vis results show that 37% of progesterone is released from the nanoparticles after 22 h, much slower than free release (99% after 14 h), which demonstrates that the presence of the hydrophobic segment can effectively control the release of hydrophobic drugs.
Synthesis of an amphiphilic block polymer poly(ethyl methacrylate)‐block‐poly(2‐hydroxyethyl methacrylate) on magnetite nanoparticles and their use as potential drug carriers 相似文献
Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.
A series of novel temperature and pH responsive block copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM) and poly(L ‐lysine) (PLL) were synthesized. The effect of pH and the length of PLL on the lower critical solution temperature (LCST) of PNIPAM, and the self‐assembly of these PLL‐based copolymers induced by temperature and pH changes were investigated by the cloud point method, dynamic light scattering (DLS) and environmental scanning electron microscopy (ESEM). These PNIPAM‐b‐PLL copolymers can self‐assemble into micelle‐like aggregates with PNIPAM as the hydrophobic block at acidic pH and high temperatures; and at alkaline pH and low temperatures, they can self‐assemble into particles with PLL as the hydrophobic block. The copolymers may have potential applications in biotechnological and biomedical areas as drug release carriers.
While network‐like assemblies are formed by amphiphilic polyphosphazenes with poly(N‐isopropylacrylamide) and ethyl tryptophan as side groups in aqueous solution, a significant morphology transformation is observed when small molecules that exhibit hydrogen‐bonding interactions with amphiphilic copolymers are introduced during the preparation of polymeric assemblies through a dialysis procedure. Depending on copolymer composition and the content of small molecules introduced, aggregates ranging from general vesicles, high‐genus vesicles, to well‐defined nanospheres can be prepared successfully as clearly evidenced by TEM observation, which suggests this procedure should be a novel approach to prepare composite vesicles.
A series of well‐defined rod‐coil PAA‐b‐DPS block copolymers, containing Fréchet‐type dendronized polystyrene (DPS) with different generation as a rod‐like hydrophobic block and poly(acrylic acid) (PAA) as a hydrophilic coil were synthesized. The procedure included the following steps: the precursor PMA‐b‐DPS copolymer was prepared through ATRP of Fréchet‐type dendritic styrene macromonomer bearing the first to the third generation (G1–G3), respectively, initiated by poly(methyl acrylate) (PMA‐Br). Then, by converting PMA into PAA by subsequent hydrolysis, the targeted amphiphilic copolymers were obtained. Moreover, by using the rod‐coil amphiphiles as building blocks, large compound micelles and vesicles were formed in a binary solvent mixture of DMF/H2O. Morphological changes in self‐assembly showed dependence on the length of the dendronized block.
Summary: An initiator for nitroxide mediated ‘living’ free radical polymerization was prepared with a fluorescent tag attached to the initiating alkyl radical terminus. This was used to synthesize amphiphilic poly(acrylic acid)‐block‐polystyrene diblock copolymers, which self assembled in a tetrahydrofuran/buffer solution to form structures that are visible by fluorescence.
Random copolymers of poly(9,9‐di‐n‐octylfluorene) (PF8) incorporating 0, 8, 12, 15, and 20% dibenzothiophene (DBT), and copolymers with 2, 5, 8, 12, and 15% dibenzothiophene‐S,S‐dioxide (S‐unit) were synthesised. Absorption and emission spectra of thin films indicate that the DBT system shows a linear decrease of toluene vapour induced β phase with increasing DBT content to a 20% cutoff, whilst in the S‐unit copolymers the β phase is present up to 12% co‐monomer content, and at 15% the characteristic absorption peak is absent or masked. These results demonstrate the limits, in thin films, at which the β phase can be formed in widely used PF8 copolymer systems for device applications and clearly show that it is practical to use copolymers having electron or hole transport units in the polyfluorene backbone and still be able to form efficient β phase emission sites.
Summary: Diblock terpolymers that consist of homopolymer and statistical copolymer (polyampholyte) building blocks are synthesized by group transfer polymerization. Two types of block tepolymers are explored in aqueous media: the amphiphilic poly{[(diethylamino)ethyl methacrylate]‐co‐(methacrylic acid)}‐block‐poly(methyl methacrylate) and the double hydrophilic poly[oligo(ethylene glycol) methacrylate]‐block‐poly{[(diethylamino)ethyl methacrylate]‐co‐(methacrylic acid)}. The first terpolymer self‐assembles in aqueous media to form responsive micelles that change their corona charge sign upon switching pH. The second terpolymer exhibits a multi‐responsive behavior. It forms neutral, positive, or negative micelles depending on a combination of different environmental conditions such as temperature, pH, and ionic strength.
A new synthesis of amphiphilic biodegradable copolymers consisting of hydrophobic poly(3‐hydroxyalkanoate) (PHA) backbone and hydrophilic poly(ethylene glycol) (PEG) units as side chains is described. Poly[(3‐hydroxyoctanoate)‐co‐(3‐hydroxyundecenoate)] (PHOU) was first methanolyzed and its unsaturated side chains were quantitatively oxidized to carboxylic acid. Esterification with propargyl alcohol led to an alkyne‐containing “clickable” PHA in 71% conversion. Its reactivity was successfully demonstrated by grafting azide‐terminated PEG chains of 550 and 5 000 g · mol−1, respectively. All products were fully characterized using GPC, 1H, and COSY NMR.
The free volume (voids) distribution in the lamellae of the conventional symmetric and amphiphilic diblock copolymers is studied via Monte–Carlo simulation based on the standard bond fluctuation model. Both in the conventional and amphiphilic block copolymers the voids are found to concentrate on the interfaces between the incompatible units, the magnitude of the effect being unexpectedly significant. A crystalline‐like ordering of voids with increase of the incompatibility between the different repeated units in amphiphilic copolymers is first reported and implications of this peculiarity for the morphology and mechanical properties of the amphiphilic copolymers are discussed.
Water‐dispersible PEGylated nanoparticles (NPs) presenting amine‐reactive conjugation sites at their surfaces were synthesized and their ability to react with amines was demonstrated. An amphiphilic block copolymer bearing an N‐succinimidyl ester at its water‐soluble end was synthesized by the consecutive controlled radical polymerization of poly(ethylene glycol) methacrylate and styrene from a functional halide initiator. After purification of the copolymer, NPs of approximately 40 nm were obtained by a self‐assembly process in water. The reactivity of the NPs was evidenced by reacting them with primary amines, including a fluorescent dye. The activated ester remained stable throughout all synthetic steps and a nearly quantitative coupling efficiency was obtained.
Summary: A series of new polyisoprene‐block‐polylactide and polystyrene‐block‐polylactide diblock copolymers was prepared by combining the living anionic polymerization of isoprene or styrene, and the stereoselective ring‐opening polymerization of rac‐lactide. Aluminum and yttrium‐based polystyrene or polyisoprene macroinitiators yielded isotactic‐stereoblock and heterotactic‐enriched polylactide segments, respectively. A strong influence of the microstructure of the polylactide block on the aggregation properties in solution and morphological behavior of the solid materials in thin films has been observed.
General strategy used for the preparation of the diblock copolymers, illustrated here for poly(isoprene‐block‐lactide). Poly(styrene‐block‐lactide) copolymers were prepared similarly. 相似文献
Microporous films consisting of two‐dimensionally ordered void structures ‐ so‐called honeycomb films ‐ were produced by evaporation of polymer solutions under high humidity. Two types of poly(vinyl cinnamate)s were used: A newly synthesized amphiphilic poly(vinyl cinnamate) and a mixture of a commercial poly(vinyl cinnamate) and an amphiphilic polyion complex. Photo‐crosslinking of the honeycomb structure could be achieved by UV irradiation while completely retaining the film morphology. The crosslinked films showed excellent stability against organic solvents.
Summary: The affinity of polybetaines of pyridiniocarboxylate structure that differed by the number n of methylene groups in the betaine moieties (n = 1, 2, 4, and 5) to the tagged poly(methacrylic acid) or DNA was estimated by fluorescence quenching techniques. The revealed irregular change of the affinity with increase in n and the pronounced pH‐induced stabilization of the complexes in neutral media may be particularly beneficial in the development of (bio)separation techniques.
pH‐Dependence of stability of PCB‐n complexes with poly(methacrylic acid) in water‐salt solutions presented in relative units. 相似文献
Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO113‐b‐PDMA82) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.
We report the synthesis of a series of block copolymers consisting of a rod‐like semiconducting poly(2,5‐di(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene) (DEH‐PPV) block and a flexible poly(lactic acid) (PLA) block that can be selectively degraded under mild conditions. Such selectively degradable block copolymers are designed as self‐assembling templates for bulk heterojunction donor–acceptor layers in organic solar cells. A lamellar microphase‐separated domain structure was identified for block copolymers with PLA volume fractions between 29 and 79% in bulk and thin films using SAXS, TEM, and AFM. Depending on the ratio of the two blocks we find either lamellae oriented parallel or perpendicular to the substrate in thin films.
Summary: Copolymers of poly(ethylene oxide) (PEO) and 5,5′‐azodisalicylic acid (Olsalazine, OLZ) were synthesized and evaluated by hydrolysis and in‐vitro biodegradation with azoreductase. It was found that changing the molecular weight of the PEO blocks affected the loading ratio of OLZ, and resulted in significant differences in the hydration and degradability of the copolymers. These novel azo‐containing copolymers can be used in colon‐specific drug delivery.
Release of 5‐ASA from OLZ and PEO‐OLZ copolymers incubated with rat cecum content in the presence of benzyl viologen and α‐D ‐glucose. 相似文献
